Skip to contentSkip to conversation

PCI: mvebu: add suspend/resume support

PATCH New Thomas Petazzoni 3 participants 4 messages Mar 17, 2015 – Mar 20, 2015 PCI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI: mvebu: add suspend/resume support

This commit implements suspend/resume support for the mvebu PCIe host driver. Without this commit, the system will panic at resume time when PCIe devices are connected.

Note that we have to use the ->suspend_noirq() and ->resume_noirq() hooks, because at resume time, the PCI fixups are done at ->resume_noirq() time, so the PCIe controller has to be ready at this point.

---
 drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
drivers/pci/host/pci-mvebu.c +38 -0
index 1309cfb..1ab8635 100644
@@ -129,6 +129,7 @@ struct mvebu_pcie_port {
 	size_t memwin_size;
 	phys_addr_t iowin_base;
 	size_t iowin_size;
+	u32 saved_pcie_stat;
 };
 
 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
@@ -899,6 +900,35 @@ static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
 		pcie->msi->dev = &pcie->pdev->dev;
 }
 
+static int mvebu_pcie_suspend(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
+	}
+
+	return 0;
+}
+
+static int mvebu_pcie_resume(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
+		mvebu_pcie_setup_hw(port);
+	}
+
+	return 0;
+}
+
 static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
@@ -1056,6 +1086,8 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
+	platform_set_drvdata(pdev, pcie);
+
 	return 0;
 }
 
@@ -1068,12 +1100,18 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
 
+static struct dev_pm_ops mvebu_pcie_pm_ops = {
+	.suspend_noirq = mvebu_pcie_suspend,
+	.resume_noirq = mvebu_pcie_resume,
+};
+
 static struct platform_driver mvebu_pcie_driver = {
 	.driver = {
 		.name = "mvebu-pcie",
 		.of_match_table = mvebu_pcie_of_match_table,
 		/* driver unloading/unbinding currently not supported */
 		.suppress_bind_attrs = true,
+		.pm = &mvebu_pcie_pm_ops,
 	},
 	.probe = mvebu_pcie_probe,
 };
Signature · 1 line
2.1.0
#1 lore raw

PATCH 1/1 PCI: mvebu: add suspend/resume support

Hey Thomas,

Quoted 19 lines · Thomas Petazzoni

This commit implements suspend/resume support for the mvebu PCIe host driver. Without this commit, the system will panic at resume time when PCIe devices are connected.

Note that we have to use the ->suspend_noirq() and ->resume_noirq() hooks, because at resume time, the PCI fixups are done at ->resume_noirq() time, so the PCIe controller has to be ready at this point.

---
 drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
drivers/pci/host/pci-mvebu.c +0 -0
index 1309cfb..1ab8635 100644

drivers/pci/host/pci-mvebu.c struct mvebu_pcie_port { · line 132

Quoted 4 lines
drivers/pci/host/pci-mvebu.c +1 -0
@@ -129,6 +129,7 @@ struct mvebu_pcie_port {
 	size_t memwin_size;
 	phys_addr_t iowin_base;
 	size_t iowin_size;
+	u32 saved_pcie_stat;

nit: It's already in the pcie port struct, why not just call it saved_state?

Either way,

thx,

Jason.

#2 lore raw

PATCH 1/1 PCI: mvebu: add suspend/resume support

Dear Jason Cooper,

Quoted 11 lines · Jason Cooper

drivers/pci/host/pci-mvebu.c struct mvebu_pcie_port { · line 132

Quoted 9 lines
drivers/pci/host/pci-mvebu.c +1 -0
index 1309cfb..1ab8635 100644
@@ -129,6 +129,7 @@ struct mvebu_pcie_port {
 	size_t memwin_size;
 	phys_addr_t iowin_base;
 	size_t iowin_size;
+	u32 saved_pcie_stat;

nit: It's already in the pcie port struct, why not just call it saved_state?

Well the "stat" does not mean "state", but refers to the register being saved in this field. The register is called: PCIE_STAT_OFF. Hence the name saved_pcie_stat. But I'm fine with changing this to some other name, I really don't care :)

Quoted 3 lines

Either way,

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
maintainer
#3 lore raw

PATCH 1/1 PCI: mvebu: add suspend/resume support

In reply to Thomas Petazzoni
Quoted 10 lines · Thomas Petazzoni

This commit implements suspend/resume support for the mvebu PCIe host driver. Without this commit, the system will panic at resume time when PCIe devices are connected.

Note that we have to use the ->suspend_noirq() and ->resume_noirq() hooks, because at resume time, the PCI fixups are done at ->resume_noirq() time, so the PCIe controller has to be ready at this point.

Applied with Jason's ack to pci/host-mvebu for v4.1, thanks!

Quoted 83 lines
---
 drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
drivers/pci/host/pci-mvebu.c +38 -0
index 1309cfb..1ab8635 100644
@@ -129,6 +129,7 @@ struct mvebu_pcie_port {
 	size_t memwin_size;
 	phys_addr_t iowin_base;
 	size_t iowin_size;
+	u32 saved_pcie_stat;
 };
 
 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
@@ -899,6 +900,35 @@ static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
 		pcie->msi->dev = &pcie->pdev->dev;
 }
 
+static int mvebu_pcie_suspend(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
+	}
+
+	return 0;
+}
+
+static int mvebu_pcie_resume(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
+		mvebu_pcie_setup_hw(port);
+	}
+
+	return 0;
+}
+
 static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
@@ -1056,6 +1086,8 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
+	platform_set_drvdata(pdev, pcie);
+
 	return 0;
 }
 
@@ -1068,12 +1100,18 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
 
+static struct dev_pm_ops mvebu_pcie_pm_ops = {
+	.suspend_noirq = mvebu_pcie_suspend,
+	.resume_noirq = mvebu_pcie_resume,
+};
+
 static struct platform_driver mvebu_pcie_driver = {
 	.driver = {
 		.name = "mvebu-pcie",
 		.of_match_table = mvebu_pcie_of_match_table,
 		/* driver unloading/unbinding currently not supported */
 		.suppress_bind_attrs = true,
+		.pm = &mvebu_pcie_pm_ops,
 	},
 	.probe = mvebu_pcie_probe,
 };
Signature · 1 line
2.1.0