Skip to contentSkip to conversation

unknown qca6164 model 0x0041

DISCUSSION Arnd Bergmann 3 participants 4 messages Mar 19, 2015 – Mar 20, 2015 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hi,

I just got a Lenovo Yoga 3 11" Laptop that came with a NFA345 wifi module that is allegedly using a qca6164 chip. The Windows driver calls it a 61x4 version 20 device and the PCI ID is 168c:0041, which is different from the device ID that was just added to ath10k as QCA6174_2_1_DEVICE_ID (168c:003e).

Does anyone have more information about this device and about how hard it would be to add support to the driver? Is there a chance that it might just work by adding the IDs or is it something rather different?

Arnd

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 10 lines · Arnd Bergmann

Hi,

I just got a Lenovo Yoga 3 11" Laptop that came with a NFA345 wifi module that is allegedly using a qca6164 chip. The Windows driver calls it a 61x4 version 20 device and the PCI ID is 168c:0041, which is different from the device ID that was just added to ath10k as QCA6174_2_1_DEVICE_ID (168c:003e).

Does anyone have more information about this device and about how hard it would be to add support to the driver? Is there a chance that it might just work by adding the IDs or is it something rather different?

"version 20 device" strongly suggests this is a hw2.1 device. Currently there's only ath10k firmware for hw3.0 chips available. You can look through ath10k mailing list for discussions on qca6174 hw2.1 (qca6164 is basically 1x1 instead of 2x2 from what I understand).

If not for the firmware confusion adding support to the driver is probably as trivial as just adding the new pci device id to the supported list.

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#2 lore raw
Quoted 12 lines · Michal Kazior
Quoted 10 lines · Arnd Bergmann

Hi,

I just got a Lenovo Yoga 3 11" Laptop that came with a NFA345 wifi module that is allegedly using a qca6164 chip. The Windows driver calls it a 61x4 version 20 device and the PCI ID is 168c:0041, which is different from the device ID that was just added to ath10k as QCA6174_2_1_DEVICE_ID (168c:003e).

Does anyone have more information about this device and about how hard it would be to add support to the driver? Is there a chance that it might just work by adding the IDs or is it something rather different?

Quoted 8 lines

"version 20 device" strongly suggests this is a hw2.1 device. Currently there's only ath10k firmware for hw3.0 chips available. You can look through ath10k mailing list for discussions on qca6174 hw2.1 (qca6164 is basically 1x1 instead of 2x2 from what I understand).

If not for the firmware confusion adding support to the driver is probably as trivial as just adding the new pci device id to the supported list.

Ok, I see. I still have Windows on the machine, so I can probably manage to extract the blob and also build a patched kernel once I'm able to install a working environment on the laptop.

Thanks for the quick reply!

Arnd

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#3 lore raw
Quoted 18 lines · Arnd Bergmann
Quoted 17 lines · Michal Kazior
Quoted 10 lines · Arnd Bergmann

Hi,

I just got a Lenovo Yoga 3 11" Laptop that came with a NFA345 wifi module that is allegedly using a qca6164 chip. The Windows driver calls it a 61x4 version 20 device and the PCI ID is 168c:0041, which is different from the device ID that was just added to ath10k as QCA6174_2_1_DEVICE_ID (168c:003e).

Does anyone have more information about this device and about how hard it would be to add support to the driver? Is there a chance that it might just work by adding the IDs or is it something rather different?

"version 20 device" strongly suggests this is a hw2.1 device. Currently there's only ath10k firmware for hw3.0 chips available. You can look through ath10k mailing list for discussions on qca6174 hw2.1 (qca6164 is basically 1x1 instead of 2x2 from what I understand).

Quoted 7 lines
Quoted 3 lines

If not for the firmware confusion adding support to the driver is probably as trivial as just adding the new pci device id to the supported list.

Ok, I see. I still have Windows on the machine, so I can probably manage to extract the blob and also build a patched kernel once I'm able to install a working environment on the laptop.

I'm internally trying to sort out the firmware problem but that will probably take some time. I or Michal will send mail once we have something newsworthy.

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k