Staging: dgnc: Reduce line size to increase readability

index 41105be..2abe60b 100644
@@ -333,7 +333,8 @@ static inline void neo_set_new_start_stop_chars(struct channel_t *ch)
 {
 
 	/* if hardware flow control is set, then skip this whole thing */
-	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) || ch->ch_c_cflag & CRTSCTS)
+	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) ||
+		ch->ch_c_cflag & CRTSCTS)
 		return;
 
 	/* Tell UART what start/stop chars it should be looking for */

@@ -684,7 +685,8 @@ static void neo_param(struct tty_struct *tty)
 		};
 
 		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
-		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGNC_PRINT))
+		if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
+			(un->un_type == DGNC_PRINT))
 			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
 		else
 			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;

@@ -697,7 +699,8 @@ static void neo_param(struct tty_struct *tty)
 
 		jindex = baud;
 
-		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+		if ((iindex >= 0) && (iindex < 4) &&
+			(jindex >= 0) && (jindex < 16))
 			baud = bauds[iindex][jindex];
 		else
 			baud = 0;

@@ -801,11 +804,13 @@ static void neo_param(struct tty_struct *tty)
 	/* Set new start/stop chars */
 	neo_set_new_start_stop_chars(ch);
 
-	if (ch->ch_digi.digi_flags & CTSPACE || ch->ch_c_cflag & CRTSCTS) {
+	if (ch->ch_digi.digi_flags & CTSPACE ||
+		ch->ch_c_cflag & CRTSCTS) {
 		neo_set_cts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXON) {
 		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+			(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_output_flow_control(ch);
 		else
 			neo_set_ixon_flow_control(ch);

@@ -817,7 +822,8 @@ static void neo_param(struct tty_struct *tty)
 		neo_set_rts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXOFF) {
 		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+			(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_input_flow_control(ch);
 		else
 			neo_set_ixoff_flow_control(ch);

@@ -1200,7 +1206,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		linestatus = 0;
 
 		/* Copy data from uart to the queue */
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+		memcpy_fromio(ch->ch_rqueue + head,
+				&ch->ch_neo_uart->txrxburst, n);
 
 		/*
 		 * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed