watchdog: at91sam9: use endian agnostic IO
Subsystems (2)
PATCH 1/1 watchdog: at91sam9: use endian agnostic IO
Use endian agnostic IO functions for the watchdog driver for when it is enabled on ATSAMA5D36 devices running in big endian.
---
CC: Boris Brezillon <[email protected]>
CC: Guenter Roeck <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Wim Van Sebroeck <[email protected]>
CC: [email protected]
CC: Andrew Victor <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Jean-Christophe Plagniol-Villard <[email protected]>
--- drivers/watchdog/at91sam9_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/watchdog/at91sam9_wdt.c +2 -2
@@ -40,9 +40,9 @@#define DRV_NAME "AT91SAM9 Watchdog"#define wdt_read (wdt, field) \ - __raw_readl((wdt)->base + (field)) + readl_relaxed((wdt)->base + (field))#define wdt_write (wtd, field, val) \ - __raw_writel((val), (wdt)->base + (field)) + writel_relaxed((val), (wdt)->base + (field))/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, * use this to convert a watchdog
Signature · 1 line
2.1.4
Quoted 4 lines · Ben Dooks
Use endian agnostic IO functions for the watchdog driver for when it is enabled on ATSAMA5D36 devices running in big endian.
Signed-off-by Ben Dooks <[email protected]>
Quoted 32 lines
---
CC: Boris Brezillon <[email protected]>
CC: Guenter Roeck <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Wim Van Sebroeck <[email protected]>
CC: [email protected]
CC: Andrew Victor <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Jean-Christophe Plagniol-Villard <[email protected]>--- drivers/watchdog/at91sam9_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/watchdog/at91sam9_wdt.c +2
-2@@ -40,9 +40,9 @@#define DRV_NAME "AT91SAM9 Watchdog"#define wdt_read (wdt, field) \ - __raw_readl((wdt)->base + (field)) + readl_relaxed((wdt)->base + (field))#define wdt_write (wtd, field, val) \ - __raw_writel((val), (wdt)->base + (field)) + writel_relaxed((val), (wdt)->base + (field))/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, * use this to convert a watchdog Signature · 1 line
2.1.4
Quoted 4 lines · On Thu, 26 Mar 2015 14:34:14 +0000 Ben Dooks <[email protected]> wrote:
Use endian agnostic IO functions for the watchdog driver for when it is enabled on ATSAMA5D36 devices running in big endian.
Signed-off-by Ben Dooks <[email protected]>
Quoted 29 lines
---
CC: Boris Brezillon <[email protected]>
CC: Guenter Roeck <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Wim Van Sebroeck <[email protected]>
CC: [email protected]
CC: Andrew Victor <[email protected]>
CC: Nicolas Ferre <[email protected]>
CC: Jean-Christophe Plagniol-Villard <[email protected]>--- drivers/watchdog/at91sam9_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/watchdog/at91sam9_wdt.c +2
-2@@ -40,9 +40,9 @@#define DRV_NAME "AT91SAM9 Watchdog"#define wdt_read (wdt, field) \ - __raw_readl((wdt)->base + (field)) + readl_relaxed((wdt)->base + (field))#define wdt_write (wtd, field, val) \ - __raw_writel((val), (wdt)->base + (field)) + writel_relaxed((val), (wdt)->base + (field))/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, * use this to convert a watchdog
Signature · 3 lines
Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com