ip-link: allow human readable output with base of 1024 only for byte counts
Subsystems (2)
PATCH 1/1 ip-link: allow human readable output with base of 1024 only for byte counts
From: Christian Hesse <[email protected]>
Counting bytes with a base of 1024 is ok. Counting packets, errors, etc that way makes no sense.
So only print byte counts with a base of 1024 if option -iec is given.
--- ip/ipaddress.c | 98 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 49 insertions(+), 49 deletions(-)
ip/ipaddress.c +49 -49
@@ -361,7 +361,7 @@ static void print_vfinfo(FILE *fp, struct rtattr *vfinfo) } } -static void print_num (FILE *fp,unsigned width,uint64_t count) +static void print_num (FILE *fp,unsigned width,uint64_t count,int use_iec) {const char *prefix ="kMGTPE" ;const unsigned int base = use_iec ?1024 :1000 ;
@@ -408,14 +408,14 @@ static void print_link_stats64(FILE *fp, const struct rtnl_link_stats64 *s, s->rx_compressed ? "compressed" : "", _SL_);fprintf (fp," " ); -print_num (fp,10 , s->rx_bytes); -print_num (fp,8 , s->rx_packets); -print_num (fp,7 , s->rx_errors); -print_num (fp,7 , s->rx_dropped); -print_num (fp,7 , s->rx_over_errors); -print_num (fp,7 , s->multicast); +print_num (fp,10 , s->rx_bytes, use_iec); +print_num (fp,8 , s->rx_packets,0 ); +print_num (fp,7 , s->rx_errors,0 ); +print_num (fp,7 , s->rx_dropped,0 ); +print_num (fp,7 , s->rx_over_errors,0 ); +print_num (fp,7 , s->multicast,0 );if (s->rx_compressed) -print_num (fp,7 , s->rx_compressed); +print_num (fp,7 , s->rx_compressed,0 );/* RX error stats */ if (show_stats >1 ) {
@@ -423,11 +423,11 @@ static void print_link_stats64(FILE *fp, const struct rtnl_link_stats64 *s,fprintf (fp," RX errors: length crc frame fifo missed%s" , _SL_);fprintf (fp," " ); -print_num (fp,8 , s->rx_length_errors); -print_num (fp,7 , s->rx_crc_errors); -print_num (fp,7 , s->rx_frame_errors); -print_num (fp,7 , s->rx_fifo_errors); -print_num (fp,7 , s->rx_missed_errors); +print_num (fp,8 , s->rx_length_errors,0 ); +print_num (fp,7 , s->rx_crc_errors,0 ); +print_num (fp,7 , s->rx_frame_errors,0 ); +print_num (fp,7 , s->rx_fifo_errors,0 ); +print_num (fp,7 , s->rx_missed_errors,0 ); }fprintf (fp,"%s" , _SL_);
@@ -437,14 +437,14 @@ static void print_link_stats64(FILE *fp, const struct rtnl_link_stats64 *s,fprintf (fp," " ); -print_num (fp,10 , s->tx_bytes); -print_num (fp,8 , s->tx_packets); -print_num (fp,7 , s->tx_errors); -print_num (fp,7 , s->tx_dropped); -print_num (fp,7 , s->tx_carrier_errors); -print_num (fp,7 , s->collisions); +print_num (fp,10 , s->tx_bytes, use_iec); +print_num (fp,8 , s->tx_packets,0 ); +print_num (fp,7 , s->tx_errors,0 ); +print_num (fp,7 , s->tx_dropped,0 ); +print_num (fp,7 , s->tx_carrier_errors,0 ); +print_num (fp,7 , s->collisions,0 );if (s->tx_compressed) -print_num (fp,7 , s->tx_compressed); +print_num (fp,7 , s->tx_compressed,0 );/* TX error stats */ if (show_stats >1 ) {
@@ -455,12 +455,12 @@ static void print_link_stats64(FILE *fp, const struct rtnl_link_stats64 *s,fprintf (fp,"%s" , _SL_);fprintf (fp," " ); -print_num (fp,8 , s->tx_aborted_errors); -print_num (fp,7 , s->tx_fifo_errors); -print_num (fp,7 , s->tx_window_errors); -print_num (fp,7 , s->tx_heartbeat_errors); +print_num (fp,8 , s->tx_aborted_errors,0 ); +print_num (fp,7 , s->tx_fifo_errors,0 ); +print_num (fp,7 , s->tx_window_errors,0 ); +print_num (fp,7 , s->tx_heartbeat_errors,0 );if (carrier_changes) -print_num (fp,7 , *(uint32_t *)RTA_DATA (carrier_changes)); +print_num (fp,7 , *(uint32_t *)RTA_DATA (carrier_changes),0 ); } }
@@ -473,25 +473,25 @@ static void print_link_stats32(FILE *fp, const struct rtnl_link_stats *s,fprintf (fp," " ); -print_num (fp,10 , s->rx_bytes); -print_num (fp,8 , s->rx_packets); -print_num (fp,7 , s->rx_errors); -print_num (fp,7 , s->rx_dropped); -print_num (fp,7 , s->rx_over_errors); -print_num (fp,7 , s->multicast); +print_num (fp,10 , s->rx_bytes, use_iec); +print_num (fp,8 , s->rx_packets,0 ); +print_num (fp,7 , s->rx_errors,0 ); +print_num (fp,7 , s->rx_dropped,0 ); +print_num (fp,7 , s->rx_over_errors,0 ); +print_num (fp,7 , s->multicast,0 );if (s->rx_compressed) -print_num (fp,7 , s->rx_compressed); +print_num (fp,7 , s->rx_compressed,0 );/* RX error stats */ if (show_stats >1 ) {fprintf (fp,"%s" , _SL_);fprintf (fp," RX errors: length crc frame fifo missed%s" , _SL_);fprintf (fp," " ); -print_num (fp,8 , s->rx_length_errors); -print_num (fp,7 , s->rx_crc_errors); -print_num (fp,7 , s->rx_frame_errors); -print_num (fp,7 , s->rx_fifo_errors); -print_num (fp,7 , s->rx_missed_errors); +print_num (fp,8 , s->rx_length_errors,0 ); +print_num (fp,7 , s->rx_crc_errors,0 ); +print_num (fp,7 , s->rx_frame_errors,0 ); +print_num (fp,7 , s->rx_fifo_errors,0 ); +print_num (fp,7 , s->rx_missed_errors,0 ); }fprintf (fp,"%s" , _SL_);
@@ -500,14 +500,14 @@ static void print_link_stats32(FILE *fp, const struct rtnl_link_stats *s, s->tx_compressed ? "compressed" : "", _SL_);fprintf (fp," " ); -print_num (fp,10 , s->tx_bytes); -print_num (fp,8 , s->tx_packets); -print_num (fp,7 , s->tx_errors); -print_num (fp,7 , s->tx_dropped); -print_num (fp,7 , s->tx_carrier_errors); -print_num (fp,7 , s->collisions); +print_num (fp,10 , s->tx_bytes, use_iec); +print_num (fp,8 , s->tx_packets,0 ); +print_num (fp,7 , s->tx_errors,0 ); +print_num (fp,7 , s->tx_dropped,0 ); +print_num (fp,7 , s->tx_carrier_errors,0 ); +print_num (fp,7 , s->collisions,0 );if (s->tx_compressed) -print_num (fp,7 , s->tx_compressed); +print_num (fp,7 , s->tx_compressed,0 );/* TX error stats */ if (show_stats >1 ) {
@@ -518,12 +518,12 @@ static void print_link_stats32(FILE *fp, const struct rtnl_link_stats *s,fprintf (fp,"%s" , _SL_);fprintf (fp," " ); -print_num (fp,8 , s->tx_aborted_errors); -print_num (fp,7 , s->tx_fifo_errors); -print_num (fp,7 , s->tx_window_errors); -print_num (fp,7 , s->tx_heartbeat_errors); +print_num (fp,8 , s->tx_aborted_errors,0 ); +print_num (fp,7 , s->tx_fifo_errors,0 ); +print_num (fp,7 , s->tx_window_errors,0 ); +print_num (fp,7 , s->tx_heartbeat_errors,0 );if (carrier_changes) -print_num (fp,7 , *(uint32_t *)RTA_DATA (carrier_changes)); +print_num (fp,7 , *(uint32_t *)RTA_DATA (carrier_changes),0 ); } }
Signature · 1 line
2.3.4
Quoted 7 lines · On Thu, 26 Mar 2015 12:24:08 +0100 Christian Hesse <[email protected]> wrote:
From: Christian Hesse <[email protected]>
Counting bytes with a base of 1024 is ok. Counting packets, errors, etc that way makes no sense.
So only print byte counts with a base of 1024 if option -iec is given.Signed-off-by Christian Hesse <[email protected]>
This changes the output which users expect, especially the packet counts should follow existing practice. And I doubt anyone would have 1024 errors.
Stephen Hemminger <[email protected]> on Sun, 2015/03/29 22:58:
Quoted 5 lines
Quoted 2 lines · On Thu, 26 Mar 2015 12:24:08 +0100 Christian Hesse <[email protected]> wrote:
From: Christian Hesse <[email protected]>
Quoted 8 lines
Quoted 5 lines
Counting bytes with a base of 1024 is ok. Counting packets, errors, etc that way makes no sense.
So only print byte counts with a base of 1024 if option -iec is given.Signed-off-by Christian Hesse <[email protected]>This changes the output which users expect, especially the packet counts should follow existing practice. And I doubt anyone would have 1024 errors.
With current code you can give -iec and everything (including errors) is printed with IEC units. This patch changes it to only print byte counts with IEC units, so error will be displayed with a base of 1000 always.
I think my patch changes things to what user expects, no?
Signature · 3 lines
main(a){char*c=/* Schoene Gruesse */"B?IJj;MEH"
"CX:;",b;for(a/* Chris get my mail address: */=0;b=c[a++];)
putchar(b-1/(/* gcc -o sig sig.c && ./sig */b/42*2-3)*42);}