input: tsc2007: Convert msecs to jiffies only once

Eliminate redundant calculations by performing millisecond to jiffy calculations once during driver initialization.

Signed-off-by Aaron Sierra <[email protected]>

---
 drivers/input/touchscreen/tsc2007.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

drivers/input/touchscreen/tsc2007.c +6 -5

index 1bf9906..4e97afb 100644
@@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 			dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
 		}
 
-		wait_event_timeout(ts->wait, ts->stopped,
-				   msecs_to_jiffies(ts->poll_period));
+		wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
 	}
 
 	dev_dbg(&ts->client->dev, "UP\n");

@@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
 		ts->fuzzz = val32;
 
 	if (!of_property_read_u64(np, "ti,poll-period", &val64))
-		ts->poll_period = val64;
+		ts->poll_period = msecs_to_jiffies(val64);
 	else
-		ts->poll_period = 1;
+		ts->poll_period = msecs_to_jiffies(1);
 
 	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
 		ts->x_plate_ohms = val32;

@@ -350,7 +349,9 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
-	ts->poll_period       = pdata->poll_period ? : 1;
+	ts->poll_period       = pdata->poll_period ?
+					msecs_to_jiffies(pdata->poll_period) :
+					msecs_to_jiffies(1);
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
 	ts->fuzzx             = pdata->fuzzx;

Signature · 1 line

1.9.1