Skip to contentSkip to conversation

ARM: dts: hummingboard: Remove unneeded 'fsl,mode' property

PATCH New Fabio Estevam 2 participants 3 messages Apr 1, 2015 – Apr 6, 2015

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: hummingboard: Remove unneeded 'fsl,mode' property

From: Fabio Estevam <[email protected]>

imx6qdl-hummingboard boards use sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having the 'fsl,mode' property.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +0 -1
index 151a3db..1f42c93 100644
@@ -263,7 +263,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 ARM: dts: hummingboard: Remove unneeded 'fsl,mode' property

Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

imx6qdl-hummingboard boards use sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having the 'fsl,mode' property.

Signed-off-by Fabio Estevam <[email protected]>

Has this been tested at all?

Signature · 2 lines
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
author reviewer
#2 lore raw

PATCH 1/1 ARM: dts: hummingboard: Remove unneeded 'fsl, mode' property

Hi Russell,

Quoted 1 line · Russell King - ARM Linux

Has this been tested at all?

Yes, it works fine on my imx6q-hummingboard.

Regards,

Fabio Estevam