Skip to contentSkip to conversation

ASoC: wm5102: Remove set of volume update bits for output 3R

PATCH Applied Charles Keepax 2 participants 2 messages Apr 3, 2015 – Apr 6, 2015

Subsystems (3)
Sound ASoC Wolfson microelectronics drivers
lore
Share & tools
lore

Charles Keepax

author
#0 lore raw

PATCH 1/1 ASoC: wm5102: Remove set of volume update bits for output 3R

The earpiece on wm5102 is mono, thus there is no output 3R. Don't toggle the volume update bits for this output, although worth noting that doing so had no negative effects it is just redundant.

Signed-off-by Charles Keepax <[email protected]>
---
 sound/soc/codecs/wm5102.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)
sound/soc/codecs/wm5102.c +0 -1
index 6d0fe0a..0c6d1bc 100644
@@ -1861,7 +1861,6 @@ static unsigned int wm5102_digital_vu[] = {
 	ARIZONA_DAC_DIGITAL_VOLUME_2L,
 	ARIZONA_DAC_DIGITAL_VOLUME_2R,
 	ARIZONA_DAC_DIGITAL_VOLUME_3L,
-	ARIZONA_DAC_DIGITAL_VOLUME_3R,
 	ARIZONA_DAC_DIGITAL_VOLUME_4L,
 	ARIZONA_DAC_DIGITAL_VOLUME_4R,
 	ARIZONA_DAC_DIGITAL_VOLUME_5L,
Signature · 1 line
1.7.2.5
maintainer Applied
#1 lore raw
Quoted 3 lines · Charles Keepax

The earpiece on wm5102 is mono, thus there is no output 3R. Don't toggle the volume update bits for this output, although worth noting that doing so had no negative effects it is just redundant.

Applied, thanks.