Skip to contentSkip to conversation

board/raspberrypi: readme: add a missing word

PATCH New Baruch Siach 3 participants 5 messages Apr 7, 2015 Broadcom BCM2711/BCM2835 Arm architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 board/raspberrypi: readme: add a missing word

Cc "Yann E. MORIN" <[email protected]>
---
 board/raspberrypi/readme.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/raspberrypi/readme.txt +1 -1
index b513ca321347..7a6df0637ad8 100644
@@ -23,7 +23,7 @@ Configure Buildroot
 -------------------
 
 The raspberrypi_defconfig configuration is a minimal configuration with
-all that is required to bring the Raspberry Pi. You should base your
+all that is required to bring the Raspberry Pi up. You should base your
 work on this defconfig:
 
   $ make raspberrypi_defconfig
Signature · 1 line
2.1.4
#1 lore raw

PATCH 2/2 board/raspberrypi: document RPi-2 defconfig

Document the correct defconfig for ARMv7 based RPi-2.

Cc "Yann E. MORIN" <[email protected]>
---
 board/raspberrypi/readme.txt | 4 ++++
 1 file changed, 4 insertions(+)
board/raspberrypi/readme.txt +4 -0
index 7a6df0637ad8..4ead046ffc76 100644
@@ -32,6 +32,10 @@ Alternatively, if you want to test support for the Device Tree:
 
   $ make raspberrypi_dt_defconfig
 
+For Raspberry Pi 2 use a different defconfig:
+
+  $ make raspberrypi2_defconfig
+
 If you want to use a persistent rootfs, skip to "Build the rootfs", below.
 
 For a volatile rootfs, you have to slightly adjust the configuration:
Signature · 1 line
2.1.4
#2 lore raw

PATCH 2/2 board/raspberrypi: document RPi-2 defconfig

Baruch, All,

On 2015-04-07 14:44 +0300, Baruch Siach spake thusly:

Quoted 4 lines

Document the correct defconfig for ARMv7 based RPi-2.

Cc "Yann E. MORIN" <[email protected]>

Regards,
Yann E. MORIN.

Quoted 22 lines
---
 board/raspberrypi/readme.txt | 4 ++++
 1 file changed, 4 insertions(+)
board/raspberrypi/readme.txt +4 -0
index 7a6df0637ad8..4ead046ffc76 100644
@@ -32,6 +32,10 @@ Alternatively, if you want to test support for the Device Tree:
 
   $ make raspberrypi_dt_defconfig
 
+For Raspberry Pi 2 use a different defconfig:
+
+  $ make raspberrypi2_defconfig
+
 If you want to use a persistent rootfs, skip to "Build the rootfs", below.
 
 For a volatile rootfs, you have to slightly adjust the configuration:
Signature · 1 line
2.1.4
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#3 lore raw

PATCH 1/2 board/raspberrypi: readme: add a missing word

In reply to Baruch Siach

Baruch, All,

On 2015-04-07 14:44 +0300, Baruch Siach spake thusly:

Quoted 2 lines
Cc "Yann E. MORIN" <[email protected]>

Regards,
Yann E. MORIN.

Quoted 20 lines
---
 board/raspberrypi/readme.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/raspberrypi/readme.txt +1 -1
index b513ca321347..7a6df0637ad8 100644
@@ -23,7 +23,7 @@ Configure Buildroot
 -------------------
 
 The raspberrypi_defconfig configuration is a minimal configuration with
-all that is required to bring the Raspberry Pi. You should base your
+all that is required to bring the Raspberry Pi up. You should base your
 work on this defconfig:
 
   $ make raspberrypi_defconfig
Signature · 1 line
2.1.4
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#4 lore raw

PATCH 1/2 board/raspberrypi: readme: add a missing word

In reply to Baruch Siach

Dear Baruch Siach,

Quoted 5 lines · Baruch Siach
Cc "Yann E. MORIN" <[email protected]>
---
 board/raspberrypi/readme.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Both applied.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com