drm/i915/chv: Remove DPIO force latency causing interpair skew issue
Subsystems (2)
PATCH 1/1 drm/i915/chv: Remove DPIO force latency causing interpair skew issue
From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
--- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 1 file changed, 5 deletions(-)
drivers/gpu/drm/i915/intel_hdmi.c +0 -5
@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 17 lines · On Thu, Apr 09, 2015 at 10:17:05AM -0700, [email protected] wrote:
From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
Signed-off-by Clint Taylor <[email protected]>--- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 1 file changed, 5 deletions(-)drivers/gpu/drm/i915/intel_hdmi.c +0
-0
drivers/gpu/drm/i915/intel_hdmi.c static void chv_hdmi_pre_enable(struct intel_encoder *encoder) · line 1522
Quoted 8 lines
drivers/gpu/drm/i915/intel_hdmi.c +0
-5@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -
On a huch I went and tried this same treatment on intel_dp.c and it fixes the remaining link training issues [1] I've been seeing \o/ I still need to try with the other DP display that was having these problems, but that'll have to wait until tomorrow.
So please respin this with the same change made to intel_dp.c (someone should really eliminate the code duplication we have going on there), and assuming my test with the other display goes as well I can then post some DPIO lane power gating patches which I've been holding back because they made the problem worse.
[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/059877.html
Quoted 10 lines
drivers/gpu/drm/i915/intel_hdmi.c +0
-0/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 32 lines · Ville Syrjälä
Quoted 17 lines · On Thu, Apr 09, 2015 at 10:17:05AM -0700, [email protected] wrote:
From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
Signed-off-by Clint Taylor <[email protected]>--- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 1 file changed, 5 deletions(-)drivers/gpu/drm/i915/intel_hdmi.c +0
-0drivers/gpu/drm/i915/intel_hdmi.c static void chv_hdmi_pre_enable(struct intel_encoder *encoder) · line 1522
Quoted 8 lines
drivers/gpu/drm/i915/intel_hdmi.c +0
-5@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -On a huch I went and tried this same treatment on
intel_dp.cand it fixes the remaining link training issues [1] I've been seeing \o/ I still need to try with the other DP display that was having these problems, but that'll have to wait until tomorrow.
Quoted 6 lines
So please respin this with the same change made to
intel_dp.c(someone should really eliminate the code duplication we have going on there), and assuming my test with the other display goes as well I can then post some DPIO lane power gating patches which I've been holding back because they made the problem worse.
v2 respin has been sent. You saved me lots of time testing the same change on DP. I will probably still put it on a scope to confirm the improvement.
I didn't take on the hint of fixing the code duplication.
-Clint
Quoted 14 lines
[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/059877.html
Quoted 10 lines
drivers/gpu/drm/i915/intel_hdmi.c +0
-1/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), --1.7.9.5
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915/chv: Remove DPIO force latency causing interpair skew issue
In reply to [email protected]From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
ver2: added same treatment to intel_dp.c based on Ville's testing.
--- drivers/gpu/drm/i915/intel_dp.c | 5 ----- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 2 files changed, 10 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +0 -5
@@ -2740,11 +2740,6 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)/* Program Tx lane latency optimal setting*/ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
drivers/gpu/drm/i915/intel_hdmi.c +0 -5
@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · On Thu, Apr 09, 2015 at 01:42:06PM -0700, [email protected] wrote:
From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
ver2: added same treatment to
intel_dp.cbased on Ville's testing.Cc Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <[email protected]>Signed-off-by Clint Taylor <[email protected]>
Yep this fixes the DP link training issues on both of the problematic displays I have (HP ZR24w and ASUS PB278Q). Nice work.
Quoted 39 lines
--- drivers/gpu/drm/i915/intel_dp.c | 5 ----- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 2 files changed, 10 deletions(-)drivers/gpu/drm/i915/intel_dp.c +0
-5@@ -2740,11 +2740,6 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)/* Program Tx lane latency optimal setting*/ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),drivers/gpu/drm/i915/intel_hdmi.c +0
-5@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),Signature · 1 line
1.7.9.5
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Ville Syrjälä
Quoted 9 lines · On Thu, Apr 09, 2015 at 01:42:06PM -0700, [email protected] wrote:
From: Clint Taylor <[email protected]>
Latest version of the "CHV DPIO programming notes" no longer requires writes to TX DW 11 to fix a +2UI interpair skew issue. The current code from April 2014 was actually causing additional skew issues between all TMDS pairs.
ver2: added same treatment to
intel_dp.cbased on Ville's testing.
Quoted 8 lines
Quoted 2 lines
Cc Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <[email protected]>Signed-off-by Clint Taylor <[email protected]>Yep this fixes the DP link training issues on both of the problematic displays I have (HP ZR24w and ASUS PB278Q). Nice work.
Reviewed-by Ville Syrjälä <[email protected]>Tested-by Ville Syrjälä <[email protected]>
Pushed to drm-intel-next-fixes (because chv support is no longer flagged preliminary since drm-next and v4.1). Thanks for the patch and review.
BR,
Jani.
Quoted 48 lines
Quoted 40 lines
--- drivers/gpu/drm/i915/intel_dp.c | 5 ----- drivers/gpu/drm/i915/intel_hdmi.c | 5 ----- 2 files changed, 10 deletions(-)drivers/gpu/drm/i915/intel_dp.c +0
-5@@ -2740,11 +2740,6 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)/* Program Tx lane latency optimal setting*/ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),drivers/gpu/drm/i915/intel_hdmi.c +0
-5@@ -1515,11 +1515,6 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)/* Program Tx latency optimal setting */ for (i =0 ; i <4 ; i++) { -/* Set the latency optimal bit */ - data = (i ==1 ) ?0x0 :0x6 ; -vlv_dpio_write (dev_priv, pipe,CHV_TX_DW11 (ch, i), - data <<DPIO_FRC_LATENCY_SHFIT ); -/* Set the upar bit */ data = (i ==1 ) ?0x0 :0x1 ; vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),Signature · 1 line
1.7.9.5Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Task id: 6167 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV 276/276 276/276 ILK 302/302 302/302 SNB -31 313/313 282/313 IVB 337/337 337/337 BYT 286/286 286/286 HSW 395/395 395/395 BDW 321/321 321/321
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
SNB igt@kms_flip@bo-too-big-interruptible DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip_event_leak DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@flip-vs-dpms-off-vs-modeset DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@flip-vs-dpms-off-vs-modeset-interruptible DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@nonexisting-fb DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@nonexisting-fb-interruptible DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@single-buffer-flip-vs-dpms-off-vs-modeset DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@single-buffer-flip-vs-dpms-off-vs-modeset-interruptible DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip_tiling@flip-changes-tiling DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_mmio_vs_cs_flip@setcrtc_vs_cs_flip DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_mmio_vs_cs_flip@setplane_vs_cs_flip DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_rotation_crc@primary-rotation DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@cursor DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@cursor-dpms DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@debugfs-forcewake-user DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@dpms-mode-unset-non-lpsp DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@dpms-non-lpsp DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@drm-resources-equal DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@fences DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@fences-dpms DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-execbuf DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-idle DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-mmap-cpu DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-mmap-gtt DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-pread DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@i2c DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@modeset-non-lpsp DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@modeset-non-lpsp-stress-no-wait DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@pci-d3-state DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@reg-read-ioctl DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@rte DMESG_WARN(5)PASS(3) DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 7 lines · On Sat, 11 Apr 2015, [email protected] wrote:
Task id: 6167 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series AppliedPNV 276/276 276/276 ILK 302/302 302/302 SNB -31 313/313 282/313
The patch does not touch SNB code paths, what gives?
BR,
Jani.
Quoted 104 lines
IVB 337/337 337/337 BYT 286/286 286/286 HSW 395/395 395/395 BDW 321/321 321/321-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
SNB igt@kms_flip@bo-too-big-interruptible DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip_event_leak DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@flip-vs-dpms-off-vs-modeset DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@flip-vs-dpms-off-vs-modeset-interruptible DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@nonexisting-fb DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@nonexisting-fb-interruptible DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@single-buffer-flip-vs-dpms-off-vs-modeset DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip@single-buffer-flip-vs-dpms-off-vs-modeset-interruptible DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_flip_tiling@flip-changes-tiling DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_mmio_vs_cs_flip@setcrtc_vs_cs_flip DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_mmio_vs_cs_flip@setplane_vs_cs_flip DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@kms_rotation_crc@primary-rotation DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@cursor DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@cursor-dpms DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@debugfs-forcewake-user DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@dpms-mode-unset-non-lpsp DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@dpms-non-lpsp DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@drm-resources-equal DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@fences DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@fences-dpms DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-execbuf DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-idle DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-mmap-cpu DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-mmap-gtt DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@gem-pread DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@i2c DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@modeset-non-lpsp DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@modeset-non-lpsp-stress-no-wait DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@pci-d3-state DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@reg-read-ioctl DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
SNB igt@pm_rpm@rte DMESG_WARN(5)PASS(3)DMESG_WARN(2)
(dmesg patch applied)drm:intel_dp_start_link_train[i915]]*ERROR*too_many_voltage_retries,give_up@too many voltage .* give up drm:intel_dp_complete_link_train[i915]]*ERROR*failed_to_train_DP,aborting@failed to train .* aborting
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Jani Nikula
Quoted 7 lines · On Sat, 11 Apr 2015, [email protected] wrote:
Task id: 6167 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series AppliedPNV 276/276 276/276 ILK 302/302 302/302 SNB -31 313/313 282/313The patch does not touch SNB code paths, what gives?
In the past few days dp link retraining sprung up all over the place in PRTS results. I dunno what exactly is happening. I think He Shuang is still investigating.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Task id: 6165 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV 276/276 276/276 ILK 302/302 302/302 SNB 313/313 313/313 IVB 337/337 337/337 BYT 286/286 286/286 HSW 395/395 395/395 BDW 321/321 321/321
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx