Skip to contentSkip to conversation

Basic support to ZTE ZX296702

PATCH Superseded Jun Nie 4 participants 11 messages Mar 27, 2015 – Apr 13, 2015

Subsystems (6)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Jun Nie

author
#0 lore raw

v2 cover Basic support to ZTE ZX296702

V2 changes vs V1:
- Remove private L2 cache code and reuse existing code
- Reuse pl011 low level debug code
- Revise dts names and doc
- Polish clock driver
- Add SMP method and support 2nd core powering off

Jun Nie (7):
ARM: zx: add basic support for ZTE ZX296702
MAINTAINERS: add entry for ARM ZTE architecture
ARM: zx: add low level debug support for zx296702
ARM: dts: zx: add an initial zx296702 dts and doc
clk: zx: add clock support to zx296702
ARM: zx: enable SMP and hotplug for zx296702
ARM: zx: Add basic defconfig support to ZX296702

 Documentation/devicetree/bindings/arm/zte.txt      |  15 +
 .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++
 Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   9 +
 arch/arm/Kconfig                                   |   2 +
 arch/arm/Kconfig.debug                             |  14 +
 arch/arm/Makefile                                  |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/zx296702-ad1.dts                 |  48 ++
 arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++
 arch/arm/configs/zx_defconfig                      | 130 ++++
 arch/arm/include/debug/pl01x.S                     |   7 +
 arch/arm/mach-zx/Kconfig                           |  18 +
 arch/arm/mach-zx/Makefile                          |   2 +
 arch/arm/mach-zx/core.h                            |  19 +
 arch/arm/mach-zx/headsmp.S                         |  32 +
 arch/arm/mach-zx/platsmp.c                         | 189 ++++++
 arch/arm/mach-zx/zx296702.c                        |  31 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/zte/Makefile                           |   2 +
 drivers/clk/zte/clk-pll.c                          | 180 ++++++
 drivers/clk/zte/clk-zx296702.c                     | 658 +++++++++++++++++++++
 drivers/clk/zte/clk.h                              |  30 +
 include/dt-bindings/clock/zx296702-clock.h         | 162 +++++
 25 files changed, 1727 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
 create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
 create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
 create mode 100644 arch/arm/boot/dts/zx296702.dtsi
 create mode 100644 arch/arm/configs/zx_defconfig
 create mode 100644 arch/arm/mach-zx/Kconfig
 create mode 100644 arch/arm/mach-zx/Makefile
 create mode 100644 arch/arm/mach-zx/core.h
 create mode 100644 arch/arm/mach-zx/headsmp.S
 create mode 100644 arch/arm/mach-zx/platsmp.c
 create mode 100644 arch/arm/mach-zx/zx296702.c
 create mode 100644 drivers/clk/zte/Makefile
 create mode 100644 drivers/clk/zte/clk-pll.c
 create mode 100644 drivers/clk/zte/clk-zx296702.c
 create mode 100644 drivers/clk/zte/clk.h
 create mode 100644 include/dt-bindings/clock/zx296702-clock.h
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v2 1/7 ARM: zx: add basic support for ZTE ZX296702

Add basic code for ZTE ZX296702 platform.

---
 arch/arm/Kconfig            |  2 ++
 arch/arm/Makefile           |  1 +
 arch/arm/mach-zx/Kconfig    | 18 ++++++++++++++++++
 arch/arm/mach-zx/Makefile   |  1 +
 arch/arm/mach-zx/zx296702.c | 31 +++++++++++++++++++++++++++++++
 5 files changed, 53 insertions(+)
 create mode 100644 arch/arm/mach-zx/Kconfig
 create mode 100644 arch/arm/mach-zx/Makefile
 create mode 100644 arch/arm/mach-zx/zx296702.c
arch/arm/Kconfig +2 -0
index 9f1f09a..7516833 100644
@@ -967,6 +967,8 @@ source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-zx/Kconfig"
+
 source "arch/arm/mach-zynq/Kconfig"
 
 # Definitions to make life easier
arch/arm/Makefile +1 -0
index 7f99cd6..33b1588 100644
@@ -204,6 +204,7 @@ machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
+machine-$(CONFIG_ARCH_ZX)		+= zx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
arch/arm/mach-zx/Kconfig new file +18 -0
new file mode 100644
index 0000000..8bd4eb7
@@ -0,0 +1,18 @@
+menuconfig ARCH_ZX
+	bool "ZTE ZX family" if ARCH_MULTI_V7
+	help
+	  Support for ZTE ZX-based family of processors. TV
+	  set-top-box processor is supported. More will be
+	  added soon.
+
+if ARCH_ZX
+
+config SOC_ZX296702
+	bool "Enable support for ZX296702 SoC"
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	help
+	  Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
+endif
arch/arm/mach-zx/Makefile new file +1 -0
new file mode 100644
index 0000000..7a541c7
@@ -0,0 +1 @@
+obj-$(CONFIG_SOC_ZX296702) += zx296702.o
arch/arm/mach-zx/zx296702.c new file +31 -0
new file mode 100644
index 0000000..b6e5dc2
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+static const char *zx296702_dt_compat[] __initconst = {
+	"zte,zx296702",
+	NULL,
+};
+
+static void __init zx296702_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+DT_MACHINE_START(ZX, "ZTE ZX296702 (Device Tree)")
+	.init_machine   = zx296702_init_machine,
+	.dt_compat	= zx296702_dt_compat,
+	.l2c_aux_val    = 0x30400000,
+	.l2c_aux_mask   = 0xfeffffff,
+MACHINE_END
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v2 2/7 MAINTAINERS: add entry for ARM ZTE architecture

In reply to Jun Nie

Add entry for ZTE ARM architecture

---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)
MAINTAINERS +9 -0
index 69cc89f..dc74c16f 100644
@@ -1590,6 +1590,15 @@ S:	Maintained
 F:	arch/arm/mach-pxa/z2.c
 F:	arch/arm/mach-pxa/include/mach/z2.h
 
+ARM/ZTE ARCHITECTURE
+M:	Jun Nie <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-zx/
+F:	drivers/clk/zte/
+F:	Documentation/devicetree/bindings/arm/zte.txt
+F:	Documentation/devicetree/bindings/clock/zx296702-clk.txt
+
 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <[email protected]>
 R:	S?ren Brinkmann <[email protected]>
Signature · 1 line
1.9.1
author
#3 lore raw

PATCH v2 3/7 ARM: zx: add low level debug support for zx296702

In reply to Jun Nie

Use the UART0 peripheral for low level debug. Only the UART port 0 is currently supported.

---
 arch/arm/Kconfig.debug         | 14 ++++++++++++++
 arch/arm/include/debug/pl01x.S |  7 +++++++
 2 files changed, 21 insertions(+)
arch/arm/Kconfig.debug +14 -0
index 970de75..8f0ad72 100644
@@ -1169,6 +1169,18 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
+	config DEBUG_ZTE_ZX
+		bool "Use ZTE ZX UART"
+		select DEBUG_UART_PL01X
+		depends on ARCH_ZX
+		help
+		  Say Y here if you are enabling ZTE ZX296702 SOC and need
+		  debug uart support.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
 	config DEBUG_LL_UART_8250
 		bool "Kernel low-level debugging via 8250 UART"
 		help
@@ -1349,6 +1361,7 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
+	default 0x09405000 if DEBUG_ZTE_ZX
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1479,6 +1492,7 @@ config DEBUG_UART_VIRT
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
+	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_UART_BCM63XX
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
arch/arm/include/debug/pl01x.S +7 -0
index 92ef808..f7d8323 100644
@@ -12,6 +12,13 @@
 */
 #include <linux/amba/serial.h>
 
+#ifdef CONFIG_DEBUG_ZTE_ZX
+#undef UART01x_DR
+#undef UART01x_FR
+#define UART01x_DR     0x04
+#define UART01x_FR     0x14
+#endif
+
 #ifdef CONFIG_DEBUG_UART_PHYS
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
Signature · 1 line
1.9.1
author
#4 lore raw

PATCH v2 4/7 ARM: dts: zx: add an initial zx296702 dts and doc

In reply to Jun Nie

Add initial dts file and document for ZX296702 and board ZX296702-AD1. More peripherals will be added later.

---
 Documentation/devicetree/bindings/arm/zte.txt      |  15 +++
 .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++++++
 Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/zx296702-ad1.dts                 |  48 +++++++
 arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++++++++++++++++++
 7 files changed, 240 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
 create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
 create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
 create mode 100644 arch/arm/boot/dts/zx296702.dtsi
Documentation/devicetree/bindings/arm/zte.txt new file +15 -0
new file mode 100644
index 0000000..3ff5c9e
@@ -0,0 +1,15 @@
+ZTE platforms device tree bindings
+---------------------------------------
+
+-  ZX296702 board:
+    Required root node properties:
+      - compatible = "zte,zx296702-ad1", "zte,zx296702"
+
+System management required properties:
+      - compatible = "zte,sysctrl"
+
+Low power management required properties:
+      - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+      - compatible = "zte,zx-bus-matrix"
Documentation/devicetree/bindings/clock/zx296702-clk.txt new file +35 -0
new file mode 100644
index 0000000..750442b
@@ -0,0 +1,35 @@
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"zte,zx296702-topcrm-clk":
+		zx296702 top clock selection, divider and gating
+
+	"zte,zx296702-lsp0crpm-clk" and
+	"zte,zx296702-lsp1crpm-clk":
+		zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
+for the full list of zx296702 clock IDs.
+
+
+topclk: topcrm at 0x09800000 {
+        compatible = "zte,zx296702-topcrm-clk";
+        reg = <0x09800000 0x1000>;
+        #clock-cells = <1>;
+};
+
+uart0: serial at 0x09405000 {
+        compatible = "zte,zx296702-uart";
+        reg = <0x09405000 0x1000>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
+        status = "disabled";
+};
Documentation/devicetree/bindings/serial/pl011.txt +1 -1
index ba3ecb8..cbae3d9 100644
@@ -1,7 +1,7 @@
 * ARM AMBA Primecell PL011 serial UART
 
 Required properties:
-- compatible: must be "arm,primecell", "arm,pl011"
+- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
 - reg: exactly one register range with length 0x1000
 - interrupts: exactly one interrupt specifier
 
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index 389ca13..e4f96ad 100644
@@ -197,3 +197,4 @@ xillybus	Xillybus Ltd.
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
 zarlink	Zarlink Semiconductor
+zte	ZTE Corp.
arch/arm/boot/dts/Makefile +1 -0
index a1c776b..55dcfbc 100644
@@ -645,6 +645,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 endif
 
 always		:= $(dtb-y)
arch/arm/boot/dts/zx296702-ad1.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/zx296702.dtsi new file +139 -0

139 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#5 lore raw

PATCH v2 5/7 clk: zx: add clock support to zx296702

In reply to Jun Nie

It adds a clock driver for zx296702 SoC to register the clock tree to Common Clock Framework. All the clocks of bus topology and some the peripheral clocks are ready with this commit. Some missing leaf clocks for peripherals will be added later when needed.

---
 drivers/clk/Makefile                       |   1 +
 drivers/clk/zte/Makefile                   |   2 +
 drivers/clk/zte/clk-pll.c                  | 180 ++++++++
 drivers/clk/zte/clk-zx296702.c             | 658 +++++++++++++++++++++++++++++
 drivers/clk/zte/clk.h                      |  30 ++
 include/dt-bindings/clock/zx296702-clock.h | 162 +++++++
 6 files changed, 1033 insertions(+)
 create mode 100644 drivers/clk/zte/Makefile
 create mode 100644 drivers/clk/zte/clk-pll.c
 create mode 100644 drivers/clk/zte/clk-zx296702.c
 create mode 100644 drivers/clk/zte/clk.h
 create mode 100644 include/dt-bindings/clock/zx296702-clock.h
drivers/clk/Makefile +1 -0
index d478ceb..3b428bf 100644
@@ -69,4 +69,5 @@ obj-$(CONFIG_ARCH_OMAP2PLUS)		+= ti/
 obj-$(CONFIG_ARCH_U8500)		+= ux500/
 obj-$(CONFIG_COMMON_CLK_VERSATILE)	+= versatile/
 obj-$(CONFIG_X86)			+= x86/
+obj-$(CONFIG_ARCH_ZX)			+= zte/
 obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
drivers/clk/zte/Makefile new file +2 -0
new file mode 100644
index 0000000..95b707c
@@ -0,0 +1,2 @@
+obj-y := clk-pll.o
+obj-$(CONFIG_SOC_ZX296702) += clk-zx296702.o
drivers/clk/zte/clk-pll.c new file +180 -0

180 lines not on this page · raw message

drivers/clk/zte/clk-zx296702.c new file +658 -0

658 lines not on this page · raw message

drivers/clk/zte/clk.h new file +30 -0
new file mode 100644
index 0000000..419d93b
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ZTE_CLK_H
+#define __ZTE_CLK_H
+
+struct zx_pll_config {
+	unsigned long rate;
+	u32 cfg0;
+	u32 cfg1;
+};
+
+struct clk_zx_pll {
+	struct clk_hw hw;
+	void __iomem *reg_base;
+	const struct zx_pll_config *lookup_table; /* order by rate asc */
+	int count;
+	spinlock_t *lock;
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+	unsigned long flags, void __iomem *reg_base,
+	const struct zx_pll_config *lookup_table, int count, spinlock_t *lock);
+#endif
include/dt-bindings/clock/zx296702-clock.h new file +162 -0

162 lines not on this page · raw message

Signature · 1 line
1.9.1
#6 lore raw

PATCH v2 5/7 clk: zx: add clock support to zx296702

Quoting Jun Nie (2015-03-27 06:52:34)

Quoted 6 lines

It adds a clock driver for zx296702 SoC to register the clock tree to Common Clock Framework. All the clocks of bus topology and some the peripheral clocks are ready with this commit. Some missing leaf clocks for peripherals will be added later when needed.

Hello Jun Nie,

Thanks for the patch. It looks good to me. Has anyone at ZTE tested it? A reviewed-by or tested-by would be great.

Thanks,
Mike

Quoted 1,089 lines
---
 drivers/clk/Makefile                       |   1 +
 drivers/clk/zte/Makefile                   |   2 +
 drivers/clk/zte/clk-pll.c                  | 180 ++++++++
 drivers/clk/zte/clk-zx296702.c             | 658 +++++++++++++++++++++++++++++
 drivers/clk/zte/clk.h                      |  30 ++
 include/dt-bindings/clock/zx296702-clock.h | 162 +++++++
 6 files changed, 1033 insertions(+)
 create mode 100644 drivers/clk/zte/Makefile
 create mode 100644 drivers/clk/zte/clk-pll.c
 create mode 100644 drivers/clk/zte/clk-zx296702.c
 create mode 100644 drivers/clk/zte/clk.h
 create mode 100644 include/dt-bindings/clock/zx296702-clock.h
drivers/clk/Makefile +1 -0
index d478ceb..3b428bf 100644
@@ -69,4 +69,5 @@ obj-$(CONFIG_ARCH_OMAP2PLUS)          += ti/
 obj-$(CONFIG_ARCH_U8500)               += ux500/
 obj-$(CONFIG_COMMON_CLK_VERSATILE)     += versatile/
 obj-$(CONFIG_X86)                      += x86/
+obj-$(CONFIG_ARCH_ZX)                  += zte/
 obj-$(CONFIG_ARCH_ZYNQ)                        += zynq/
drivers/clk/zte/Makefile new file +2 -0
new file mode 100644
index 0000000..95b707c
@@ -0,0 +1,2 @@
+obj-y := clk-pll.o
+obj-$(CONFIG_SOC_ZX296702) += clk-zx296702.o
drivers/clk/zte/clk-pll.c new file +180 -0
new file mode 100644
index 0000000..f0ff0cb
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "clk.h"
+
+#define to_clk_zx_pll(_hw) container_of(_hw, struct clk_zx_pll, hw)
+
+#define CFG0_CFG1_OFFSET 4
+#define LOCK_FLAG BIT(30)
+#define POWER_DOWN BIT(31)
+
+static int rate_to_idx(struct clk_zx_pll *zx_pll, unsigned long rate)
+{
+       const struct zx_pll_config *config = zx_pll->lookup_table;
+       int i;
+
+       for (i = 0; i < zx_pll->count; i++) {
+               if (config[i].rate > rate)
+                       return i > 0 ? i - 1 : 0;
+
+               if (config[i].rate == rate)
+                       return i;
+       }
+
+       return i - 1;
+}
+
+static int hw_to_idx(struct clk_zx_pll *zx_pll)
+{
+       const struct zx_pll_config *config = zx_pll->lookup_table;
+       u32 hw_cfg0, hw_cfg1;
+       int i;
+
+       hw_cfg0 = readl_relaxed(zx_pll->reg_base);
+       hw_cfg1 = readl_relaxed(zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+       /* For matching the value in lookup table */
+       hw_cfg0 &= ~LOCK_FLAG;
+       hw_cfg0 |= POWER_DOWN;
+
+       for (i = 0; i < zx_pll->count; i++) {
+               if (hw_cfg0 == config[i].cfg0 && hw_cfg1 == config[i].cfg1)
+                       return i;
+       }
+
+       return -1;
+}
+
+static unsigned long zx_pll_recalc_rate(struct clk_hw *hw,
+                                       unsigned long parent_rate)
+{
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       int idx;
+
+       idx = hw_to_idx(zx_pll);
+       if (unlikely(idx == -1))
+               return 0;
+
+       return zx_pll->lookup_table[idx].rate;
+}
+
+static long zx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+                             unsigned long *prate)
+{
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       int idx;
+
+       idx = rate_to_idx(zx_pll, rate);
+
+       return zx_pll->lookup_table[idx].rate;
+}
+
+static int zx_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+                          unsigned long parent_rate)
+{
+       /* Assume current cpu is not running on current PLL */
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       const struct zx_pll_config *config;
+       int idx;
+
+       idx = rate_to_idx(zx_pll, rate);
+       config = &zx_pll->lookup_table[idx];
+
+       writel_relaxed(config->cfg0, zx_pll->reg_base);
+       writel_relaxed(config->cfg1, zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+       return 0;
+}
+
+static int zx_pll_enable(struct clk_hw *hw)
+{
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       unsigned long timeout = jiffies + msecs_to_jiffies(500);
+       u32 reg;
+
+       reg = readl_relaxed(zx_pll->reg_base);
+       writel_relaxed(reg & ~POWER_DOWN, zx_pll->reg_base);
+       while (!(readl_relaxed(zx_pll->reg_base) & LOCK_FLAG)) {
+               if (time_after(jiffies, timeout)) {
+                       pr_err("clk %s enable timeout\n",
+                               __clk_get_name(hw->clk));
+                       break;
+               }
+       }
+
+       return 0;
+}
+
+static void zx_pll_disable(struct clk_hw *hw)
+{
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       u32 reg;
+
+       reg = readl_relaxed(zx_pll->reg_base);
+       writel_relaxed(reg | POWER_DOWN, zx_pll->reg_base);
+}
+
+static int zx_pll_is_enabled(struct clk_hw *hw)
+{
+       struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+       u32 reg;
+
+       reg = readl_relaxed(zx_pll->reg_base);
+
+       return !(reg & POWER_DOWN);
+}
+
+static const struct clk_ops zx_pll_ops = {
+       .recalc_rate = zx_pll_recalc_rate,
+       .round_rate = zx_pll_round_rate,
+       .set_rate = zx_pll_set_rate,
+       .enable = zx_pll_enable,
+       .disable = zx_pll_disable,
+       .is_enabled = zx_pll_is_enabled,
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+       unsigned long flags, void __iomem *reg_base,
+       const struct zx_pll_config *lookup_table, int count, spinlock_t *lock)
+{
+       struct clk_zx_pll *zx_pll;
+       struct clk *clk;
+       struct clk_init_data init;
+
+       zx_pll = kzalloc(sizeof(*zx_pll), GFP_KERNEL);
+       if (!zx_pll)
+               return ERR_PTR(-ENOMEM);
+
+       init.name = name;
+       init.ops = &zx_pll_ops;
+       init.flags = flags;
+       init.parent_names = (parent_name ? &parent_name : NULL);
+       init.num_parents = (parent_name ? 1 : 0);
+
+       zx_pll->reg_base = reg_base;
+       zx_pll->lookup_table = lookup_table;
+       zx_pll->count = count;
+       zx_pll->lock = lock;
+       zx_pll->hw.init = &init;
+
+       clk = clk_register(NULL, &zx_pll->hw);
+
+       if (IS_ERR(clk))
+               kfree(zx_pll);
+
+       return clk;
+}
drivers/clk/zte/clk-zx296702.c new file +658 -0
new file mode 100644
index 0000000..5f4d7ed
@@ -0,0 +1,658 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/zx296702-clock.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(reg_lock);
+
+static void __iomem *topcrm_base;
+static void __iomem *lsp0crpm_base;
+static void __iomem *lsp1crpm_base;
+
+static struct clk *topclk[ZX296702_TOPCLK_END];
+static struct clk *lsp0clk[ZX296702_LSP0CLK_END];
+static struct clk *lsp1clk[ZX296702_LSP1CLK_END];
+
+static struct clk_onecell_data topclk_data;
+static struct clk_onecell_data lsp0clk_data;
+static struct clk_onecell_data lsp1clk_data;
+
+#define CLK_MUX                        (topcrm_base + 0x04)
+#define CLK_DIV                        (topcrm_base + 0x08)
+#define CLK_EN0                        (topcrm_base + 0x0c)
+#define CLK_EN1                        (topcrm_base + 0x10)
+#define VOU_LOCAL_CLKEN                (topcrm_base + 0x68)
+#define VOU_LOCAL_CLKSEL       (topcrm_base + 0x70)
+#define VOU_LOCAL_DIV2_SET     (topcrm_base + 0x74)
+#define CLK_MUX1               (topcrm_base + 0x8c)
+
+#define CLK_SDMMC1             (lsp0crpm_base + 0x0c)
+
+#define CLK_UART0              (lsp1crpm_base + 0x20)
+#define CLK_UART1              (lsp1crpm_base + 0x24)
+#define CLK_SDMMC0             (lsp1crpm_base + 0x2c)
+
+static const struct zx_pll_config pll_a9_config[] = {
+       { .rate = 700000000, .cfg0 = 0x800405d1, .cfg1 = 0x04555555 },
+       { .rate = 800000000, .cfg0 = 0x80040691, .cfg1 = 0x04aaaaaa },
+       { .rate = 900000000, .cfg0 = 0x80040791, .cfg1 = 0x04000000 },
+       { .rate = 1000000000, .cfg0 = 0x80040851, .cfg1 = 0x04555555 },
+       { .rate = 1100000000, .cfg0 = 0x80040911, .cfg1 = 0x04aaaaaa },
+       { .rate = 1200000000, .cfg0 = 0x80040a11, .cfg1 = 0x04000000 },
+};
+
+static const struct clk_div_table main_hlk_div[] = {
+       { .val = 1, .div = 2, },
+       { .val = 3, .div = 4, },
+       { /* sentinel */ }
+};
+
+static const struct clk_div_table a9_as1_aclk_divider[] = {
+       { .val = 0, .div = 1, },
+       { .val = 1, .div = 2, },
+       { .val = 3, .div = 4, },
+       { /* sentinel */ }
+};
+
+static const struct clk_div_table sec_wclk_divider[] = {
+       { .val = 0, .div = 1, },
+       { .val = 1, .div = 2, },
+       { .val = 3, .div = 4, },
+       { .val = 5, .div = 6, },
+       { .val = 7, .div = 8, },
+       { /* sentinel */ }
+};
+
+static const char const *matrix_aclk_sel[] = {
+       "pll_mm0_198M",
+       "osc",
+       "clk_148M5",
+       "pll_lsp_104M",
+};
+
+static const char const *a9_wclk_sel[] = {
+       "pll_a9",
+       "osc",
+       "clk_500",
+       "clk_250",
+};
+
+static const char const *a9_as1_aclk_sel[] = {
+       "clk_250",
+       "osc",
+       "pll_mm0_396M",
+       "pll_mac_333M",
+};
+
+static const char const *a9_trace_clkin_sel[] = {
+       "clk_74M25",
+       "pll_mm1_108M",
+       "clk_125",
+       "clk_148M5",
+};
+
+static const char const *decppu_aclk_sel[] = {
+       "clk_250",
+       "pll_mm0_198M",
+       "pll_lsp_104M",
+       "pll_audio_294M912",
+};
+
+static const char const *vou_main_wclk_sel[] = {
+       "clk_148M5",
+       "clk_74M25",
+       "clk_27",
+       "pll_mm1_54M",
+};
+
+static const char const *vou_scaler_wclk_sel[] = {
+       "clk_250",
+       "pll_mac_333M",
+       "pll_audio_294M912",
+       "pll_mm0_198M",
+};
+
+static const char const *r2d_wclk_sel[] = {
+       "pll_audio_294M912",
+       "pll_mac_333M",
+       "pll_a9_350M",
+       "pll_mm0_396M",
+};
+
+static const char const *ddr_wclk_sel[] = {
+       "pll_mac_333M",
+       "pll_ddr_266M",
+       "pll_audio_294M912",
+       "pll_mm0_198M",
+};
+
+static const char const *nand_wclk_sel[] = {
+       "pll_lsp_104M",
+       "osc",
+};
+
+static const char const *lsp_26_wclk_sel[] = {
+       "pll_lsp_26M",
+       "osc",
+};
+
+static const char const *vl0_sel[] = {
+       "vou_main_channel_div",
+       "vou_aux_channel_div",
+};
+
+static const char const *hdmi_sel[] = {
+       "vou_main_channel_wclk",
+       "vou_aux_channel_wclk",
+};
+
+static const char const *sdmmc0_wclk_sel[] = {
+       "lsp1_104M_wclk",
+       "lsp1_26M_wclk",
+};
+
+static const char const *sdmmc1_wclk_sel[] = {
+       "lsp0_104M_wclk",
+       "lsp0_26M_wclk",
+};
+
+static const char const *uart_wclk_sel[] = {
+       "lsp1_104M_wclk",
+       "lsp1_26M_wclk",
+};
+
+static inline struct clk *zx_divtbl(const char *name, const char *parent,
+                                   void __iomem *reg, u8 shift, u8 width,
+                                   const struct clk_div_table *table)
+{
+       return clk_register_divider_table(NULL, name, parent, 0, reg, shift,
+                                         width, 0, table, &reg_lock);
+}
+
+static inline struct clk *zx_div(const char *name, const char *parent,
+                                void __iomem *reg, u8 shift, u8 width)
+{
+       return clk_register_divider(NULL, name, parent, 0,
+                                   reg, shift, width, 0, &reg_lock);
+}
+
+static inline struct clk *zx_mux(const char *name, const char **parents,
+               int num_parents, void __iomem *reg, u8 shift, u8 width)
+{
+       return clk_register_mux(NULL, name, parents, num_parents,
+                               0, reg, shift, width, 0, &reg_lock);
+}
+
+static inline struct clk *zx_gate(const char *name, const char *parent,
+                                 void __iomem *reg, u8 shift)
+{
+       return clk_register_gate(NULL, name, parent, CLK_IGNORE_UNUSED,
+                                reg, shift, 0, &reg_lock);
+}
+
+static void __init zx296702_top_clocks_init(struct device_node *np)
+{
+       struct clk **clk = topclk;
+       int i;
+
+       topcrm_base = of_iomap(np, 0);
+       WARN_ON(!topcrm_base);
+
+       clk[ZX296702_OSC] =
+               clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT,
+                               30000000);
+       clk[ZX296702_PLL_A9] =
+               clk_register_zx_pll("pll_a9", "osc", 0, topcrm_base
+                               + 0x01c, pll_a9_config,
+                               ARRAY_SIZE(pll_a9_config), &reg_lock);
+
+       /* TODO: pll_a9_350M look like changeble follow a9 pll */
+       clk[ZX296702_PLL_A9_350M] =
+               clk_register_fixed_rate(NULL, "pll_a9_350M", "osc", 0,
+                               350000000);
+       clk[ZX296702_PLL_MAC_1000M] =
+               clk_register_fixed_rate(NULL, "pll_mac_1000M", "osc", 0,
+                               1000000000);
+       clk[ZX296702_PLL_MAC_333M] =
+               clk_register_fixed_rate(NULL, "pll_mac_333M",    "osc", 0,
+                               333000000);
+       clk[ZX296702_PLL_MM0_1188M] =
+               clk_register_fixed_rate(NULL, "pll_mm0_1188M", "osc", 0,
+                               1188000000);
+       clk[ZX296702_PLL_MM0_396M] =
+               clk_register_fixed_rate(NULL, "pll_mm0_396M",  "osc", 0,
+                               396000000);
+       clk[ZX296702_PLL_MM0_198M] =
+               clk_register_fixed_rate(NULL, "pll_mm0_198M",  "osc", 0,
+                               198000000);
+       clk[ZX296702_PLL_MM1_108M] =
+               clk_register_fixed_rate(NULL, "pll_mm1_108M",  "osc", 0,
+                               108000000);
+       clk[ZX296702_PLL_MM1_72M] =
+               clk_register_fixed_rate(NULL, "pll_mm1_72M",     "osc", 0,
+                               72000000);
+       clk[ZX296702_PLL_MM1_54M] =
+               clk_register_fixed_rate(NULL, "pll_mm1_54M",     "osc", 0,
+                               54000000);
+       clk[ZX296702_PLL_LSP_104M] =
+               clk_register_fixed_rate(NULL, "pll_lsp_104M",  "osc", 0,
+                               104000000);
+       clk[ZX296702_PLL_LSP_26M] =
+               clk_register_fixed_rate(NULL, "pll_lsp_26M",     "osc", 0,
+                               26000000);
+       clk[ZX296702_PLL_DDR_266M] =
+               clk_register_fixed_rate(NULL, "pll_ddr_266M",    "osc", 0,
+                               266000000);
+       clk[ZX296702_PLL_AUDIO_294M912] =
+               clk_register_fixed_rate(NULL, "pll_audio_294M912", "osc", 0,
+                               294912000);
+
+       /* bus clock */
+       clk[ZX296702_MATRIX_ACLK] =
+               zx_mux("matrix_aclk", matrix_aclk_sel,
+                               ARRAY_SIZE(matrix_aclk_sel), CLK_MUX, 2, 2);
+       clk[ZX296702_MAIN_HCLK] =
+               zx_divtbl("main_hclk", "matrix_aclk", CLK_DIV, 0, 2,
+                               main_hlk_div);
+       clk[ZX296702_MAIN_PCLK] =
+               zx_divtbl("main_pclk", "matrix_aclk", CLK_DIV, 2, 2,
+                               main_hlk_div);
+
+       /* cpu clock */
+       clk[ZX296702_CLK_500] =
+               clk_register_fixed_factor(NULL, "clk_500", "pll_mac_1000M", 0,
+                               1, 2);
+       clk[ZX296702_CLK_250] =
+               clk_register_fixed_factor(NULL, "clk_250", "pll_mac_1000M", 0,
+                               1, 4);
+       clk[ZX296702_CLK_125] =
+               clk_register_fixed_factor(NULL, "clk_125", "clk_250", 0, 1, 2);
+       clk[ZX296702_CLK_148M5] =
+               clk_register_fixed_factor(NULL, "clk_148M5", "pll_mm0_1188M", 0,
+                               1, 8);
+       clk[ZX296702_CLK_74M25] =
+               clk_register_fixed_factor(NULL, "clk_74M25", "pll_mm0_1188M", 0,
+                               1, 16);
+       clk[ZX296702_A9_WCLK] =
+               zx_mux("a9_wclk", a9_wclk_sel, ARRAY_SIZE(a9_wclk_sel), CLK_MUX,
+                               0, 2);
+       clk[ZX296702_A9_AS1_ACLK_MUX] =
+               zx_mux("a9_as1_aclk_mux", a9_as1_aclk_sel,
+                               ARRAY_SIZE(a9_as1_aclk_sel), CLK_MUX, 4, 2);
+       clk[ZX296702_A9_TRACE_CLKIN_MUX] =
+               zx_mux("a9_trace_clkin_mux", a9_trace_clkin_sel,
+                               ARRAY_SIZE(a9_trace_clkin_sel), CLK_MUX1, 0, 2);
+       clk[ZX296702_A9_AS1_ACLK_DIV] =
+               zx_divtbl("a9_as1_aclk_div", "a9_as1_aclk_mux", CLK_DIV, 4, 2,
+                               a9_as1_aclk_divider);
+
+       /* multi-media clock */
+       clk[ZX296702_CLK_2] =
+               clk_register_fixed_factor(NULL, "clk_2", "pll_mm1_72M", 0,
+                               1, 36);
+       clk[ZX296702_CLK_27] =
+               clk_register_fixed_factor(NULL, "clk_27", "pll_mm1_54M", 0,
+                               1, 2);
+       clk[ZX296702_DECPPU_ACLK_MUX] =
+               zx_mux("decppu_aclk_mux", decppu_aclk_sel,
+                               ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 6, 2);
+       clk[ZX296702_PPU_ACLK_MUX] =
+               zx_mux("ppu_aclk_mux", decppu_aclk_sel,
+                               ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 8, 2);
+       clk[ZX296702_MALI400_ACLK_MUX] =
+               zx_mux("mali400_aclk_mux", decppu_aclk_sel,
+                               ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 12, 2);
+       clk[ZX296702_VOU_ACLK_MUX] =
+               zx_mux("vou_aclk_mux", decppu_aclk_sel,
+                               ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 10, 2);
+       clk[ZX296702_VOU_MAIN_WCLK_MUX] =
+               zx_mux("vou_main_wclk_mux", vou_main_wclk_sel,
+                               ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 14, 2);
+       clk[ZX296702_VOU_AUX_WCLK_MUX] =
+               zx_mux("vou_aux_wclk_mux", vou_main_wclk_sel,
+                               ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 16, 2);
+       clk[ZX296702_VOU_SCALER_WCLK_MUX] =
+               zx_mux("vou_scaler_wclk_mux", vou_scaler_wclk_sel,
+                               ARRAY_SIZE(vou_scaler_wclk_sel), CLK_MUX,
+                               18, 2);
+       clk[ZX296702_R2D_ACLK_MUX] =
+               zx_mux("r2d_aclk_mux", decppu_aclk_sel,
+                               ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 20, 2);
+       clk[ZX296702_R2D_WCLK_MUX] =
+               zx_mux("r2d_wclk_mux", r2d_wclk_sel,
+                               ARRAY_SIZE(r2d_wclk_sel), CLK_MUX, 22, 2);
+
+       /* other clock */
+       clk[ZX296702_CLK_50] =
+               clk_register_fixed_factor(NULL, "clk_50", "pll_mac_1000M",
+                               0, 1, 20);
+       clk[ZX296702_CLK_25] =
+               clk_register_fixed_factor(NULL, "clk_25", "pll_mac_1000M",
+                               0, 1, 40);
+       clk[ZX296702_CLK_12] =
+               clk_register_fixed_factor(NULL, "clk_12", "pll_mm1_72M",
+                               0, 1, 6);
+       clk[ZX296702_CLK_16M384] =
+               clk_register_fixed_factor(NULL, "clk_16M384",
+                               "pll_audio_294M912", 0, 1, 18);
+       clk[ZX296702_CLK_32K768] =
+               clk_register_fixed_factor(NULL, "clk_32K768", "clk_16M384",
+                               0, 1, 500);
+       clk[ZX296702_SEC_WCLK_DIV] =
+               zx_divtbl("sec_wclk_div", "pll_lsp_104M", CLK_DIV, 6, 3,
+                               sec_wclk_divider);
+       clk[ZX296702_DDR_WCLK_MUX] =
+               zx_mux("ddr_wclk_mux", ddr_wclk_sel,
+                               ARRAY_SIZE(ddr_wclk_sel), CLK_MUX, 24, 2);
+       clk[ZX296702_NAND_WCLK_MUX] =
+               zx_mux("nand_wclk_mux", nand_wclk_sel,
+                               ARRAY_SIZE(nand_wclk_sel), CLK_MUX, 24, 2);
+       clk[ZX296702_LSP_26_WCLK_MUX] =
+               zx_mux("lsp_26_wclk_mux", lsp_26_wclk_sel,
+                               ARRAY_SIZE(lsp_26_wclk_sel), CLK_MUX, 27, 1);
+
+       /* gates */
+       clk[ZX296702_A9_AS0_ACLK] =
+               zx_gate("a9_as0_aclk",  "matrix_aclk",          CLK_EN0, 0);
+       clk[ZX296702_A9_AS1_ACLK] =
+               zx_gate("a9_as1_aclk",  "a9_as1_aclk_div",      CLK_EN0, 1);
+       clk[ZX296702_A9_TRACE_CLKIN] =
+               zx_gate("a9_trace_clkin", "a9_trace_clkin_mux", CLK_EN0, 2);
+       clk[ZX296702_DECPPU_AXI_M_ACLK] =
+               zx_gate("decppu_axi_m_aclk", "decppu_aclk_mux", CLK_EN0, 3);
+       clk[ZX296702_DECPPU_AHB_S_HCLK] =
+               zx_gate("decppu_ahb_s_hclk",    "main_hclk",    CLK_EN0, 4);
+       clk[ZX296702_PPU_AXI_M_ACLK] =
+               zx_gate("ppu_axi_m_aclk",       "ppu_aclk_mux", CLK_EN0, 5);
+       clk[ZX296702_PPU_AHB_S_HCLK] =
+               zx_gate("ppu_ahb_s_hclk",       "main_hclk",    CLK_EN0, 6);
+       clk[ZX296702_VOU_AXI_M_ACLK] =
+               zx_gate("vou_axi_m_aclk",       "vou_aclk_mux", CLK_EN0, 7);
+       clk[ZX296702_VOU_APB_PCLK] =
+               zx_gate("vou_apb_pclk", "main_pclk",            CLK_EN0, 8);
+       clk[ZX296702_VOU_MAIN_CHANNEL_WCLK] =
+               zx_gate("vou_main_channel_wclk", "vou_main_wclk_mux",
+                               CLK_EN0, 9);
+       clk[ZX296702_VOU_AUX_CHANNEL_WCLK] =
+               zx_gate("vou_aux_channel_wclk", "vou_aux_wclk_mux",
+                               CLK_EN0, 10);
+       clk[ZX296702_VOU_HDMI_OSCLK_CEC] =
+               zx_gate("vou_hdmi_osclk_cec", "clk_2",          CLK_EN0, 11);
+       clk[ZX296702_VOU_SCALER_WCLK] =
+               zx_gate("vou_scaler_wclk", "vou_scaler_wclk_mux", CLK_EN0, 12);
+       clk[ZX296702_MALI400_AXI_M_ACLK] =
+               zx_gate("mali400_axi_m_aclk", "mali400_aclk_mux", CLK_EN0, 13);
+       clk[ZX296702_MALI400_APB_PCLK] =
+               zx_gate("mali400_apb_pclk",     "main_pclk",    CLK_EN0, 14);
+       clk[ZX296702_R2D_WCLK] =
+               zx_gate("r2d_wclk",             "r2d_wclk_mux", CLK_EN0, 15);
+       clk[ZX296702_R2D_AXI_M_ACLK] =
+               zx_gate("r2d_axi_m_aclk",       "r2d_aclk_mux", CLK_EN0, 16);
+       clk[ZX296702_R2D_AHB_HCLK] =
+               zx_gate("r2d_ahb_hclk",         "main_hclk",    CLK_EN0, 17);
+       clk[ZX296702_DDR3_AXI_S0_ACLK] =
+               zx_gate("ddr3_axi_s0_aclk",     "matrix_aclk",  CLK_EN0, 18);
+       clk[ZX296702_DDR3_APB_PCLK] =
+               zx_gate("ddr3_apb_pclk",        "main_pclk",    CLK_EN0, 19);
+       clk[ZX296702_DDR3_WCLK] =
+               zx_gate("ddr3_wclk",            "ddr_wclk_mux", CLK_EN0, 20);
+       clk[ZX296702_USB20_0_AHB_HCLK] =
+               zx_gate("usb20_0_ahb_hclk",     "main_hclk",    CLK_EN0, 21);
+       clk[ZX296702_USB20_0_EXTREFCLK] =
+               zx_gate("usb20_0_extrefclk",    "clk_12",       CLK_EN0, 22);
+       clk[ZX296702_USB20_1_AHB_HCLK] =
+               zx_gate("usb20_1_ahb_hclk",     "main_hclk",    CLK_EN0, 23);
+       clk[ZX296702_USB20_1_EXTREFCLK] =
+               zx_gate("usb20_1_extrefclk",    "clk_12",       CLK_EN0, 24);
+       clk[ZX296702_USB20_2_AHB_HCLK] =
+               zx_gate("usb20_2_ahb_hclk",     "main_hclk",    CLK_EN0, 25);
+       clk[ZX296702_USB20_2_EXTREFCLK] =
+               zx_gate("usb20_2_extrefclk",    "clk_12",       CLK_EN0, 26);
+       clk[ZX296702_GMAC_AXI_M_ACLK] =
+               zx_gate("gmac_axi_m_aclk",      "matrix_aclk",  CLK_EN0, 27);
+       clk[ZX296702_GMAC_APB_PCLK] =
+               zx_gate("gmac_apb_pclk",        "main_pclk",    CLK_EN0, 28);
+       clk[ZX296702_GMAC_125_CLKIN] =
+               zx_gate("gmac_125_clkin",       "clk_125",      CLK_EN0, 29);
+       clk[ZX296702_GMAC_RMII_CLKIN] =
+               zx_gate("gmac_rmii_clkin",      "clk_50",       CLK_EN0, 30);
+       clk[ZX296702_GMAC_25M_CLK] =
+               zx_gate("gmac_25M_clk",         "clk_25",       CLK_EN0, 31);
+       clk[ZX296702_NANDFLASH_AHB_HCLK] =
+               zx_gate("nandflash_ahb_hclk", "main_hclk",      CLK_EN1, 0);
+       clk[ZX296702_NANDFLASH_WCLK] =
+               zx_gate("nandflash_wclk",     "nand_wclk_mux",  CLK_EN1, 1);
+       clk[ZX296702_LSP0_APB_PCLK] =
+               zx_gate("lsp0_apb_pclk",        "main_pclk",    CLK_EN1, 2);
+       clk[ZX296702_LSP0_AHB_HCLK] =
+               zx_gate("lsp0_ahb_hclk",        "main_hclk",    CLK_EN1, 3);
+       clk[ZX296702_LSP0_26M_WCLK] =
+               zx_gate("lsp0_26M_wclk",   "lsp_26_wclk_mux",   CLK_EN1, 4);
+       clk[ZX296702_LSP0_104M_WCLK] =
+               zx_gate("lsp0_104M_wclk",       "pll_lsp_104M", CLK_EN1, 5);
+       clk[ZX296702_LSP0_16M384_WCLK] =
+               zx_gate("lsp0_16M384_wclk",     "clk_16M384",   CLK_EN1, 6);
+       clk[ZX296702_LSP1_APB_PCLK] =
+               zx_gate("lsp1_apb_pclk",        "main_pclk",    CLK_EN1, 7);
+       /* FIXME: wclk enable bit is bit8. We hack it as reserved 31 for
+        * UART does not work after parent clk is disabled/enabled */
+       clk[ZX296702_LSP1_26M_WCLK] =
+               zx_gate("lsp1_26M_wclk",     "lsp_26_wclk_mux", CLK_EN1, 31);
+       clk[ZX296702_LSP1_104M_WCLK] =
+               zx_gate("lsp1_104M_wclk",    "pll_lsp_104M",    CLK_EN1, 9);
+       clk[ZX296702_LSP1_32K_CLK] =
+               zx_gate("lsp1_32K_clk", "clk_32K768",           CLK_EN1, 10);
+       clk[ZX296702_AON_HCLK] =
+               zx_gate("aon_hclk",             "main_hclk",    CLK_EN1, 11);
+       clk[ZX296702_SYS_CTRL_PCLK] =
+               zx_gate("sys_ctrl_pclk",        "main_pclk",    CLK_EN1, 12);
+       clk[ZX296702_DMA_PCLK] =
+               zx_gate("dma_pclk",             "main_pclk",    CLK_EN1, 13);
+       clk[ZX296702_DMA_ACLK] =
+               zx_gate("dma_aclk",             "matrix_aclk",  CLK_EN1, 14);
+       clk[ZX296702_SEC_HCLK] =
+               zx_gate("sec_hclk",             "main_hclk",    CLK_EN1, 15);
+       clk[ZX296702_AES_WCLK] =
+               zx_gate("aes_wclk",             "sec_wclk_div", CLK_EN1, 16);
+       clk[ZX296702_DES_WCLK] =
+               zx_gate("des_wclk",             "sec_wclk_div", CLK_EN1, 17);
+       clk[ZX296702_IRAM_ACLK] =
+               zx_gate("iram_aclk",            "matrix_aclk",  CLK_EN1, 18);
+       clk[ZX296702_IROM_ACLK] =
+               zx_gate("irom_aclk",            "matrix_aclk",  CLK_EN1, 19);
+       clk[ZX296702_BOOT_CTRL_HCLK] =
+               zx_gate("boot_ctrl_hclk",       "main_hclk",    CLK_EN1, 20);
+       clk[ZX296702_EFUSE_CLK_30] =
+               zx_gate("efuse_clk_30", "osc",                  CLK_EN1, 21);
+
+       /* TODO: add VOU Local clocks */
+       clk[ZX296702_VOU_MAIN_CHANNEL_DIV] =
+               zx_div("vou_main_channel_div", "vou_main_channel_wclk",
+                               VOU_LOCAL_DIV2_SET, 1, 1);
+       clk[ZX296702_VOU_AUX_CHANNEL_DIV] =
+               zx_div("vou_aux_channel_div", "vou_aux_channel_wclk",
+                               VOU_LOCAL_DIV2_SET, 0, 1);
+       clk[ZX296702_VOU_TV_ENC_HD_DIV] =
+               zx_div("vou_tv_enc_hd_div", "vou_tv_enc_hd_mux",
+                               VOU_LOCAL_DIV2_SET, 3, 1);
+       clk[ZX296702_VOU_TV_ENC_SD_DIV] =
+               zx_div("vou_tv_enc_sd_div", "vou_tv_enc_sd_mux",
+                               VOU_LOCAL_DIV2_SET, 2, 1);
+       clk[ZX296702_VL0_MUX] =
+               zx_mux("vl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 8, 1);
+       clk[ZX296702_VL1_MUX] =
+               zx_mux("vl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 9, 1);
+       clk[ZX296702_VL2_MUX] =
+               zx_mux("vl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 10, 1);
+       clk[ZX296702_GL0_MUX] =
+               zx_mux("gl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 5, 1);
+       clk[ZX296702_GL1_MUX] =
+               zx_mux("gl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 6, 1);
+       clk[ZX296702_GL2_MUX] =
+               zx_mux("gl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 7, 1);
+       clk[ZX296702_WB_MUX] =
+               zx_mux("wb_mux",  vl0_sel, ARRAY_SIZE(vl0_sel),
+                               VOU_LOCAL_CLKSEL, 11, 1);
+       clk[ZX296702_HDMI_MUX] =
+               zx_mux("hdmi_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+                               VOU_LOCAL_CLKSEL, 4, 1);
+       clk[ZX296702_VOU_TV_ENC_HD_MUX] =
+               zx_mux("vou_tv_enc_hd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+                               VOU_LOCAL_CLKSEL, 3, 1);
+       clk[ZX296702_VOU_TV_ENC_SD_MUX] =
+               zx_mux("vou_tv_enc_sd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+                               VOU_LOCAL_CLKSEL, 2, 1);
+       clk[ZX296702_VL0_CLK] =
+               zx_gate("vl0_clk", "vl0_mux", VOU_LOCAL_CLKEN, 8);
+       clk[ZX296702_VL1_CLK] =
+               zx_gate("vl1_clk", "vl1_mux", VOU_LOCAL_CLKEN, 9);
+       clk[ZX296702_VL2_CLK] =
+               zx_gate("vl2_clk", "vl2_mux", VOU_LOCAL_CLKEN, 10);
+       clk[ZX296702_GL0_CLK] =
+               zx_gate("gl0_clk", "gl0_mux", VOU_LOCAL_CLKEN, 5);
+       clk[ZX296702_GL1_CLK] =
+               zx_gate("gl1_clk", "gl1_mux", VOU_LOCAL_CLKEN, 6);
+       clk[ZX296702_GL2_CLK] =
+               zx_gate("gl2_clk", "gl2_mux", VOU_LOCAL_CLKEN, 7);
+       clk[ZX296702_WB_CLK] =
+               zx_gate("wb_clk", "wb_mux", VOU_LOCAL_CLKEN, 11);
+       clk[ZX296702_CL_CLK] =
+               zx_gate("cl_clk", "vou_main_channel_div", VOU_LOCAL_CLKEN, 12);
+       clk[ZX296702_MAIN_MIX_CLK] =
+               zx_gate("main_mix_clk", "vou_main_channel_div",
+                               VOU_LOCAL_CLKEN, 4);
+       clk[ZX296702_AUX_MIX_CLK] =
+               zx_gate("aux_mix_clk", "vou_aux_channel_div",
+                               VOU_LOCAL_CLKEN, 3);
+       clk[ZX296702_HDMI_CLK] =
+               zx_gate("hdmi_clk", "hdmi_mux", VOU_LOCAL_CLKEN, 2);
+       clk[ZX296702_VOU_TV_ENC_HD_DAC_CLK] =
+               zx_gate("vou_tv_enc_hd_dac_clk", "vou_tv_enc_hd_div",
+                               VOU_LOCAL_CLKEN, 1);
+       clk[ZX296702_VOU_TV_ENC_SD_DAC_CLK] =
+               zx_gate("vou_tv_enc_sd_dac_clk", "vou_tv_enc_sd_div",
+                               VOU_LOCAL_CLKEN, 0);
+
+       /* CA9 PERIPHCLK = a9_wclk / 2 */
+       clk[ZX296702_A9_PERIPHCLK] =
+               clk_register_fixed_factor(NULL, "a9_periphclk", "a9_wclk",
+                               0, 1, 2);
+
+       for (i = 0; i < ARRAY_SIZE(topclk); i++) {
+               if (IS_ERR(clk[i])) {
+                       pr_err("zx296702 clk %d: register failed with %ld\n",
+                               i, PTR_ERR(clk[i]));
+                       return;
+               }
+       }
+
+       topclk_data.clks = topclk;
+       topclk_data.clk_num = ARRAY_SIZE(topclk);
+       of_clk_add_provider(np, of_clk_src_onecell_get, &topclk_data);
+}
+CLK_OF_DECLARE(zx296702_top_clk, "zte,zx296702-topcrm-clk",
+               zx296702_top_clocks_init);
+
+static void __init zx296702_lsp0_clocks_init(struct device_node *np)
+{
+       struct clk **clk = lsp0clk;
+       int i;
+
+       lsp0crpm_base = of_iomap(np, 0);
+       WARN_ON(!lsp0crpm_base);
+
+       /* SDMMC1 */
+       clk[ZX296702_SDMMC1_WCLK_MUX] =
+               zx_mux("sdmmc1_wclk_mux", sdmmc1_wclk_sel,
+                               ARRAY_SIZE(sdmmc1_wclk_sel), CLK_SDMMC1, 4, 1);
+       clk[ZX296702_SDMMC1_WCLK_DIV] =
+               zx_div("sdmmc1_wclk_div", "sdmmc1_wclk_mux", CLK_SDMMC1, 12, 4);
+       clk[ZX296702_SDMMC1_WCLK] =
+               zx_gate("sdmmc1_wclk", "sdmmc1_wclk_div", CLK_SDMMC1, 1);
+       clk[ZX296702_SDMMC1_PCLK] =
+               zx_gate("sdmmc1_pclk", "lsp1_apb_pclk", CLK_SDMMC1, 0);
+
+       for (i = 0; i < ARRAY_SIZE(lsp0clk); i++) {
+               if (IS_ERR(clk[i])) {
+                       pr_err("zx296702 clk %d: register failed with %ld\n",
+                               i, PTR_ERR(clk[i]));
+                       return;
+               }
+       }
+
+       lsp0clk_data.clks = lsp0clk;
+       lsp0clk_data.clk_num = ARRAY_SIZE(lsp0clk);
+       of_clk_add_provider(np, of_clk_src_onecell_get, &lsp0clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp0_clk, "zte,zx296702-lsp0crpm-clk",
+               zx296702_lsp0_clocks_init);
+
+static void __init zx296702_lsp1_clocks_init(struct device_node *np)
+{
+       struct clk **clk = lsp1clk;
+       int i;
+
+       lsp1crpm_base = of_iomap(np, 0);
+       WARN_ON(!lsp1crpm_base);
+
+       /* UART0 */
+       clk[ZX296702_UART0_WCLK_MUX] =
+               zx_mux("uart0_wclk_mux", uart_wclk_sel,
+                               ARRAY_SIZE(uart_wclk_sel), CLK_UART0, 4, 1);
+       /* FIXME: uart wclk enable bit is bit1 in. We hack it as reserved 31 for
+        * UART does not work after parent clk is disabled/enabled */
+       clk[ZX296702_UART0_WCLK] =
+               zx_gate("uart0_wclk", "uart0_wclk_mux", CLK_UART0, 31);
+       clk[ZX296702_UART0_PCLK] =
+               zx_gate("uart0_pclk", "lsp1_apb_pclk", CLK_UART0, 0);
+
+       /* UART1 */
+       clk[ZX296702_UART1_WCLK_MUX] =
+               zx_mux("uart1_wclk_mux", uart_wclk_sel,
+                               ARRAY_SIZE(uart_wclk_sel), CLK_UART1, 4, 1);
+       clk[ZX296702_UART1_WCLK] =
+               zx_gate("uart1_wclk", "uart1_wclk_mux", CLK_UART1, 1);
+       clk[ZX296702_UART1_PCLK] =
+               zx_gate("uart1_pclk", "lsp1_apb_pclk", CLK_UART1, 0);
+
+       /* SDMMC0 */
+       clk[ZX296702_SDMMC0_WCLK_MUX] =
+               zx_mux("sdmmc0_wclk_mux", sdmmc0_wclk_sel,
+                               ARRAY_SIZE(sdmmc0_wclk_sel), CLK_SDMMC0, 4, 1);
+       clk[ZX296702_SDMMC0_WCLK_DIV] =
+               zx_div("sdmmc0_wclk_div", "sdmmc0_wclk_mux", CLK_SDMMC0, 12, 4);
+       clk[ZX296702_SDMMC0_WCLK] =
+               zx_gate("sdmmc0_wclk", "sdmmc0_wclk_div", CLK_SDMMC0, 1);
+       clk[ZX296702_SDMMC0_PCLK] =
+               zx_gate("sdmmc0_pclk", "lsp1_apb_pclk", CLK_SDMMC0, 0);
+
+       for (i = 0; i < ARRAY_SIZE(lsp1clk); i++) {
+               if (IS_ERR(clk[i])) {
+                       pr_err("zx296702 clk %d: register failed with %ld\n",
+                               i, PTR_ERR(clk[i]));
+                       return;
+               }
+       }
+
+       lsp1clk_data.clks = lsp1clk;
+       lsp1clk_data.clk_num = ARRAY_SIZE(lsp1clk);
+       of_clk_add_provider(np, of_clk_src_onecell_get, &lsp1clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp1_clk, "zte,zx296702-lsp1crpm-clk",
+               zx296702_lsp1_clocks_init);
drivers/clk/zte/clk.h new file +30 -0
new file mode 100644
index 0000000..419d93b
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ZTE_CLK_H
+#define __ZTE_CLK_H
+
+struct zx_pll_config {
+       unsigned long rate;
+       u32 cfg0;
+       u32 cfg1;
+};
+
+struct clk_zx_pll {
+       struct clk_hw hw;
+       void __iomem *reg_base;
+       const struct zx_pll_config *lookup_table; /* order by rate asc */
+       int count;
+       spinlock_t *lock;
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+       unsigned long flags, void __iomem *reg_base,
+       const struct zx_pll_config *lookup_table, int count, spinlock_t *lock);
+#endif
include/dt-bindings/clock/zx296702-clock.h new file +162 -0
new file mode 100644
index 0000000..c5e7ec2
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_ZX296702_H
+#define __DT_BINDINGS_CLOCK_ZX296702_H
+
+#define ZX296702_OSC                           0
+#define ZX296702_PLL_A9                                1
+#define ZX296702_PLL_A9_350M                   2
+#define ZX296702_PLL_MAC_1000M                 3
+#define ZX296702_PLL_MAC_333M                  4
+#define ZX296702_PLL_MM0_1188M                 5
+#define ZX296702_PLL_MM0_396M                  6
+#define ZX296702_PLL_MM0_198M                  7
+#define ZX296702_PLL_MM1_108M                  8
+#define ZX296702_PLL_MM1_72M                   9
+#define ZX296702_PLL_MM1_54M                   10
+#define ZX296702_PLL_LSP_104M                  11
+#define ZX296702_PLL_LSP_26M                   12
+#define ZX296702_PLL_AUDIO_294M912             13
+#define ZX296702_PLL_DDR_266M                  14
+#define ZX296702_CLK_148M5                     15
+#define ZX296702_MATRIX_ACLK                   16
+#define ZX296702_MAIN_HCLK                     17
+#define ZX296702_MAIN_PCLK                     18
+#define ZX296702_CLK_500                       19
+#define ZX296702_CLK_250                       20
+#define ZX296702_CLK_125                       21
+#define ZX296702_CLK_74M25                     22
+#define ZX296702_A9_WCLK                       23
+#define ZX296702_A9_AS1_ACLK_MUX               24
+#define ZX296702_A9_TRACE_CLKIN_MUX            25
+#define ZX296702_A9_AS1_ACLK_DIV               26
+#define ZX296702_CLK_2                         27
+#define ZX296702_CLK_27                                28
+#define ZX296702_DECPPU_ACLK_MUX               29
+#define ZX296702_PPU_ACLK_MUX                  30
+#define ZX296702_MALI400_ACLK_MUX              31
+#define ZX296702_VOU_ACLK_MUX                  32
+#define ZX296702_VOU_MAIN_WCLK_MUX             33
+#define ZX296702_VOU_AUX_WCLK_MUX              34
+#define ZX296702_VOU_SCALER_WCLK_MUX           35
+#define ZX296702_R2D_ACLK_MUX                  36
+#define ZX296702_R2D_WCLK_MUX                  37
+#define ZX296702_CLK_50                                38
+#define ZX296702_CLK_25                                39
+#define ZX296702_CLK_12                                40
+#define ZX296702_CLK_16M384                    41
+#define ZX296702_CLK_32K768                    42
+#define ZX296702_SEC_WCLK_DIV                  43
+#define ZX296702_DDR_WCLK_MUX                  44
+#define ZX296702_NAND_WCLK_MUX                 45
+#define ZX296702_LSP_26_WCLK_MUX               46
+#define ZX296702_A9_AS0_ACLK                   47
+#define ZX296702_A9_AS1_ACLK                   48
+#define ZX296702_A9_TRACE_CLKIN                        49
+#define ZX296702_DECPPU_AXI_M_ACLK             50
+#define ZX296702_DECPPU_AHB_S_HCLK             51
+#define ZX296702_PPU_AXI_M_ACLK                        52
+#define ZX296702_PPU_AHB_S_HCLK                        53
+#define ZX296702_VOU_AXI_M_ACLK                        54
+#define ZX296702_VOU_APB_PCLK                  55
+#define ZX296702_VOU_MAIN_CHANNEL_WCLK         56
+#define ZX296702_VOU_AUX_CHANNEL_WCLK          57
+#define ZX296702_VOU_HDMI_OSCLK_CEC            58
+#define ZX296702_VOU_SCALER_WCLK               59
+#define ZX296702_MALI400_AXI_M_ACLK            60
+#define ZX296702_MALI400_APB_PCLK              61
+#define ZX296702_R2D_WCLK                      62
+#define ZX296702_R2D_AXI_M_ACLK                        63
+#define ZX296702_R2D_AHB_HCLK                  64
+#define ZX296702_DDR3_AXI_S0_ACLK              65
+#define ZX296702_DDR3_APB_PCLK                 66
+#define ZX296702_DDR3_WCLK                     67
+#define ZX296702_USB20_0_AHB_HCLK              68
+#define ZX296702_USB20_0_EXTREFCLK             69
+#define ZX296702_USB20_1_AHB_HCLK              70
+#define ZX296702_USB20_1_EXTREFCLK             71
+#define ZX296702_USB20_2_AHB_HCLK              72
+#define ZX296702_USB20_2_EXTREFCLK             73
+#define ZX296702_GMAC_AXI_M_ACLK               74
+#define ZX296702_GMAC_APB_PCLK                 75
+#define ZX296702_GMAC_125_CLKIN                        76
+#define ZX296702_GMAC_RMII_CLKIN               77
+#define ZX296702_GMAC_25M_CLK                  78
+#define ZX296702_NANDFLASH_AHB_HCLK            79
+#define ZX296702_NANDFLASH_WCLK                        80
+#define ZX296702_LSP0_APB_PCLK                 81
+#define ZX296702_LSP0_AHB_HCLK                 82
+#define ZX296702_LSP0_26M_WCLK                 83
+#define ZX296702_LSP0_104M_WCLK                        84
+#define ZX296702_LSP0_16M384_WCLK              85
+#define ZX296702_LSP1_APB_PCLK                 86
+#define ZX296702_LSP1_26M_WCLK                 87
+#define ZX296702_LSP1_104M_WCLK                        88
+#define ZX296702_LSP1_32K_CLK                  89
+#define ZX296702_AON_HCLK                      90
+#define ZX296702_SYS_CTRL_PCLK                 91
+#define ZX296702_DMA_PCLK                      92
+#define ZX296702_DMA_ACLK                      93
+#define ZX296702_SEC_HCLK                      94
+#define ZX296702_AES_WCLK                      95
+#define ZX296702_DES_WCLK                      96
+#define ZX296702_IRAM_ACLK                     97
+#define ZX296702_IROM_ACLK                     98
+#define ZX296702_BOOT_CTRL_HCLK                        99
+#define ZX296702_EFUSE_CLK_30                  100
+#define ZX296702_VOU_MAIN_CHANNEL_DIV          101
+#define ZX296702_VOU_AUX_CHANNEL_DIV           102
+#define ZX296702_VOU_TV_ENC_HD_DIV             103
+#define ZX296702_VOU_TV_ENC_SD_DIV             104
+#define ZX296702_VL0_MUX                       105
+#define ZX296702_VL1_MUX                       106
+#define ZX296702_VL2_MUX                       107
+#define ZX296702_GL0_MUX                       108
+#define ZX296702_GL1_MUX                       109
+#define ZX296702_GL2_MUX                       110
+#define ZX296702_WB_MUX                                111
+#define ZX296702_HDMI_MUX                      112
+#define ZX296702_VOU_TV_ENC_HD_MUX             113
+#define ZX296702_VOU_TV_ENC_SD_MUX             114
+#define ZX296702_VL0_CLK                       115
+#define ZX296702_VL1_CLK                       116
+#define ZX296702_VL2_CLK                       117
+#define ZX296702_GL0_CLK                       118
+#define ZX296702_GL1_CLK                       119
+#define ZX296702_GL2_CLK                       120
+#define ZX296702_WB_CLK                                121
+#define ZX296702_CL_CLK                                122
+#define ZX296702_MAIN_MIX_CLK                  123
+#define ZX296702_AUX_MIX_CLK                   124
+#define ZX296702_HDMI_CLK                      125
+#define ZX296702_VOU_TV_ENC_HD_DAC_CLK         126
+#define ZX296702_VOU_TV_ENC_SD_DAC_CLK         127
+#define ZX296702_A9_PERIPHCLK                  128
+#define ZX296702_TOPCLK_END                    129
+
+#define ZX296702_SDMMC1_WCLK_MUX               0
+#define ZX296702_SDMMC1_WCLK_DIV               1
+#define ZX296702_SDMMC1_WCLK                   2
+#define ZX296702_SDMMC1_PCLK                   3
+#define ZX296702_LSP0CLK_END                   4
+
+#define ZX296702_UART0_WCLK_MUX                        0
+#define ZX296702_UART0_WCLK                    1
+#define ZX296702_UART0_PCLK                    2
+#define ZX296702_UART1_WCLK_MUX                        3
+#define ZX296702_UART1_WCLK                    4
+#define ZX296702_UART1_PCLK                    5
+#define ZX296702_SDMMC0_WCLK_MUX               6
+#define ZX296702_SDMMC0_WCLK_DIV               7
+#define ZX296702_SDMMC0_WCLK                   8
+#define ZX296702_SDMMC0_PCLK                   9
+#define ZX296702_LSP1CLK_END                   10
+
+#endif /* __DT_BINDINGS_CLOCK_ZX296702_H */
Signature · 1 line
1.9.1
#7 lore raw

PATCH v2 5/7 clk: zx: add clock support to zx296702

In reply to Jun Nie
Quoted 6 lines · Jun Nie

It adds a clock driver for zx296702 SoC to register the clock tree to Common Clock Framework. All the clocks of bus topology and some the peripheral clocks are ready with this commit. Some missing leaf clocks for peripherals will be added later when needed.

author
#8 lore raw

PATCH v2 6/7 ARM: zx: enable SMP and hotplug for zx296702

In reply to Jun Nie

Bring up the secondary core. Enable hotplug with supporting powering off secondary core.

---
 arch/arm/mach-zx/Makefile  |   1 +
 arch/arm/mach-zx/core.h    |  19 +++++
 arch/arm/mach-zx/headsmp.S |  32 ++++++++
 arch/arm/mach-zx/platsmp.c | 189 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 arch/arm/mach-zx/core.h
 create mode 100644 arch/arm/mach-zx/headsmp.S
 create mode 100644 arch/arm/mach-zx/platsmp.c
arch/arm/mach-zx/Makefile +1 -0
index 7a541c7..7c2edf6 100644
@@ -1 +1,2 @@
 obj-$(CONFIG_SOC_ZX296702) += zx296702.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
arch/arm/mach-zx/core.h new file +19 -0
new file mode 100644
index 0000000..3efe8e0
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_ZX_CORE_H
+#define __MACH_ZX_CORE_H
+
+extern void zx_resume_jump(void);
+extern size_t zx_suspend_iram_sz;
+extern unsigned long zx_secondary_startup_pa;
+
+void zx_secondary_startup(void);
+
+#endif /* __MACH_ZX_CORE_H */
arch/arm/mach-zx/headsmp.S new file +32 -0
new file mode 100644
index 0000000..c0fece0
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+	.align 3
+
+/* It runs from physical address */
+ENTRY(zx_resume_jump)
+	adr	r1, zx_secondary_startup_pa
+	ldr	r0, [r1]
+	bx	r0
+ENDPROC(zx_resume_jump)
+
+ENTRY(zx_secondary_startup_pa)
+	.word	zx_secondary_startup_pa
+
+ENTRY(zx_suspend_iram_sz)
+        .word	. - zx_resume_jump
+ENDPROC(zx_secondary_startup_pa)
+
+
+ENTRY(zx_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(zx_secondary_startup)
arch/arm/mach-zx/platsmp.c new file +189 -0

189 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#9 lore raw

PATCH v2 7/7 ARM: zx: Add basic defconfig support for ZX296702

In reply to Jun Nie

Add basic defconfig support to zx SOC, including uart, mmc
and other common config

---
 arch/arm/configs/zx_defconfig | 130 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 130 insertions(+)
 create mode 100644 arch/arm/configs/zx_defconfig
arch/arm/configs/zx_defconfig new file +130 -0
new file mode 100644
index 0000000..e3447fc
@@ -0,0 +1,130 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="/home/niej/git/linux/initramfs.cpio.gz"
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_ZX=y
+CONFIG_SOC_ZX296702=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KSM=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HIBERNATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait"
+#CONFIG_NET is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_UID_STAT=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_DM_VERITY=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SPI=y
+CONFIG_LOGO=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_DEBUG=y
+CONFIG_FUSE_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+#CONFIG_NFS_FS is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=4096
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_PANIC_TIMEOUT=5
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_ZTE_ZX=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_GPIOLIB=y
Signature · 1 line
1.9.1
maintainer
#10 lore raw

v2 cover Basic support to ZTE ZX296702

In reply to Jun Nie
Quoted 8 lines · Jun Nie

V2 changes vs V1:
- Remove private L2 cache code and reuse existing code
- Reuse pl011 low level debug code
- Revise dts names and doc
- Polish clock driver
- Add SMP method and support 2nd core powering off

It seems we missed this for 4.1 and I only now found the patches going through old emails.

A few guidelines to make sure that doesn't happen next time:

- if you think patches are ready to be applied, send them to arm at kernel.org
- if nothing happens within a week, just remind us. Sometimes we are not sure if patches are meant for us or not.
- for more help with submission, ask on #armlinux on irc.freenode.net.

Please send the patches again after rebasing them to 4.1-rc1 once that is released.

Arnd