configs/riotboard: bump kernel to version 3.19.3
PATCH 1/2 configs/riotboard: bump kernel to version 3.19.3
Signed-off-by Nikolay Dimitrov <[email protected]>
--- configs/riotboard_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
configs/riotboard_defconfig +2 -2
@@ -20,13 +20,13 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y # kernel headers BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.19" +BR2_DEFAULT_KERNEL_VERSION="3.19.3" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_19=y # kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.19" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.19.3" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y
Signature · 1 line
1.7.10.4
PATCH 2/2 board/riotboard: readme: Update description
Signed-off-by Nikolay Dimitrov <[email protected]>
--- board/embest/riotboard/readme.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
board/embest/riotboard/readme.txt +3 -3
@@ -16,8 +16,8 @@ your SD-card: sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1 Create 1 partition on the SD-card using your favourite tool. The partition -should be big enough to hold your rootfs, for example 128MiB. Here's how an -example of such partition layout: +should be big enough to hold your rootfs, for example 128MiB. Here's an example +partition layout: Device Boot Start End Blocks Id System /dev/sdX1 2048 264191 131072 83 Linux
@@ -30,7 +30,7 @@ Deploy your rootfs to the SD-card: sudo mkdir /mnt/sdcard/ sudo mount /dev/sdX1 /mnt/sdcard/ -sudo tar xf rootfs.tar -C /mnt/sdcard/ +sudo tar xf output/images/rootfs.tar -C /mnt/sdcard/ sudo umount /dev/sdX1 3. Running buildroot
Signature · 1 line
1.7.10.4
PATCH 1/2 configs/riotboard: bump kernel to version 3.19.3
In reply to Nikolay DimitrovDear Nikolay Dimitrov,
Quoted 4 lines · Nikolay Dimitrov
Signed-off-by Nikolay Dimitrov <[email protected]>--- configs/riotboard_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Both patches applied, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com