Skip to contentSkip to conversation

ARM: sunxi: Enable simplefb in the defconfig

PATCH New Maxime Ripard 2 participants 3 messages Apr 20, 2015 – Apr 27, 2015

Subsystems (2)
Arm (32-bit) Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

Maxime Ripard

author
#0 lore raw

PATCH 1/1 ARM: sunxi: Enable simplefb in the defconfig

Now that we have simplefb support, we can enable it in our defconfig. Also enable the framebuffer console, so that we are sure that we actually get something displayed in any case.

And while we're at it, enable the module support.

Signed-off-by Maxime Ripard <[email protected]>
---
 arch/arm/configs/sunxi_defconfig | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/configs/sunxi_defconfig +5 -0
index 2c7af0a57cb1..7ebc346bf9fa 100644
@@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8

@@ -86,6 +87,10 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
Signature · 1 line
2.3.5
#1 lore raw

PATCH 1/1 ARM: sunxi: Enable simplefb in the defconfig

Hi,

Quoted 7 lines · Maxime Ripard

Now that we have simplefb support, we can enable it in our defconfig. Also enable the framebuffer console, so that we are sure that we actually get something displayed in any case.

And while we're at it, enable the module support.

Signed-off-by Maxime Ripard <[email protected]>

Makes sense:

Acked-by Hans de Goede <[email protected]>

Regards,

Hans

Quoted 28 lines
---
  arch/arm/configs/sunxi_defconfig | 5 +++++
  1 file changed, 5 insertions(+)
arch/arm/configs/sunxi_defconfig +5 -0
index 2c7af0a57cb1..7ebc346bf9fa 100644
@@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
  CONFIG_HIGH_RES_TIMERS=y
  CONFIG_BLK_DEV_INITRD=y
  CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
  CONFIG_ARCH_SUNXI=y
  CONFIG_SMP=y
  CONFIG_NR_CPUS=8

@@ -86,6 +87,10 @@ CONFIG_REGULATOR=y
  CONFIG_REGULATOR_FIXED_VOLTAGE=y
  CONFIG_REGULATOR_AXP20X=y
  CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
  CONFIG_USB=y
  CONFIG_USB_EHCI_HCD=y
  CONFIG_USB_EHCI_HCD_PLATFORM=y
author Applied
#2 lore raw

PATCH 1/1 ARM: sunxi: Enable simplefb in the defconfig

In reply to Maxime Ripard
Quoted 7 lines · Maxime Ripard

Now that we have simplefb support, we can enable it in our defconfig. Also enable the framebuffer console, so that we are sure that we actually get something displayed in any case.

And while we're at it, enable the module support.

Signed-off-by Maxime Ripard <[email protected]>

Applied.

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150427/7e81f59d/attachment.sig>