Skip to contentSkip to conversation

ARM: dts: imx6: phyFLEX: USB VBUS control is active-high

PATCH New Philipp Zabel 2 participants 2 messages Apr 21, 2015 – Apr 27, 2015

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Philipp Zabel

author
#0 lore raw

PATCH 1/1 ARM: dts: imx6: phyFLEX: USB VBUS control is active-high

The fixed-regulator bindings require a separate property enable-active-high, the standard gpio phandle property polarity setting is ignored.

Signed-off-by Philipp Zabel <[email protected]>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +2 -0
index 19cc269..1ce6133 100644
@@ -31,6 +31,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator at 1 {

@@ -40,6 +41,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};
Signature · 1 line
2.1.4
Applied
#1 lore raw

PATCH 1/1 ARM: dts: imx6: phyFLEX: USB VBUS control is active-high

Quoted 4 lines · Philipp Zabel

The fixed-regulator bindings require a separate property enable-active-high, the standard gpio phandle property polarity setting is ignored.

Signed-off-by Philipp Zabel <[email protected]>

Applied, thanks.