Skip to contentSkip to conversation

New driver causes enlightenment to resize display to 8x8?

DISCUSSION Marc MERLIN 2 participants 3 messages Apr 27, 2015

lore
Share & tools
lore
#0 lore raw

After upgrading to xserver-xorg-video-intel 2:2.99.917-1~exp1 , the performance did improve, but twice, I had e18 crash (its fault, not X's fault), give me a window that it was going to restart, and when it restarted the screen went dark.

I went to a text console, and xrandr said this:
Screen 0: minimum 8 x 8, current 8 x 8, maximum 32767 x 32767

xrandr -s anything, including 800x600 said:
xrandr: Configure crtc 0 failed

Restarting X reset things, and I had to delete my enlightenment profile for it to stop trying to resize to 8x8 on start.

I've used e18 for over a year and I never had this problem until the exact moment I upgraded the intel driver.
Out of curiosity, even if the bug was with enlightenment, how do I resize my screen once it's been mistakenly resized to 8x8. Is it a bug that xrandr was unable to resize it for me?

Thanks,
Marc

xrandr output when I was in broken state:
Screen 0: minimum 8 x 8, current 8 x 8, maximum 32767 x 32767 eDP1 connected (normal left inverted right x axis y axis)

   2880x1620      60.0 +   50.0  
   2048x1536      60.0  
   1920x1440      60.0  
   1856x1392      60.0  
   1792x1344      60.0  
   1920x1200      60.0  
   1920x1080      59.9  
   1600x1200      60.0  
   1680x1050      60.0     59.9  
   1600x1024      60.2  
   1400x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1360x768       59.8     60.0  
   1152x864       60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  

DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Signature · 8 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/  
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 11 lines · Marc MERLIN

After upgrading to xserver-xorg-video-intel 2:2.99.917-1~exp1 , the performance did improve, but twice, I had e18 crash (its fault, not X's fault), give me a window that it was going to restart, and when it restarted the screen went dark.

I went to a text console, and xrandr said this:
Screen 0: minimum 8 x 8, current 8 x 8, maximum 32767 x 32767

xrandr -s anything, including 800x600 said:
xrandr: Configure crtc 0 failed

Quoted 8 lines

Restarting X reset things, and I had to delete my enlightenment profile for it to stop trying to resize to 8x8 on start.

I've used e18 for over a year and I never had this problem until the exact moment I upgraded the intel driver.
Out of curiosity, even if the bug was with enlightenment, how do I resize my screen once it's been mistakenly resized to 8x8. Is it a bug that xrandr was unable to resize it for me?

xrandr -s is the old XRandR procotol, it should still work but it's not clear if that is going to be a bug in xrandr misconfiguring CRTC or in X server/ddx. If you can file a bug and include your Xorg.0.log along with "xtrace xrandr -s anything" and if you can manage to get an xf86-video-intel --enable-debug=full log for the above, then I can tell you where the bug lies.

At any rate "xrandr --output eDP1 --preferred" is what you want. -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
Quoted 9 lines · Chris Wilson
Quoted 5 lines

I've used e18 for over a year and I never had this problem until the exact moment I upgraded the intel driver.
Out of curiosity, even if the bug was with enlightenment, how do I resize my screen once it's been mistakenly resized to 8x8. Is it a bug that xrandr was unable to resize it for me?

xrandr -s is the old XRandR procotol, it should still work but it's not clear if that is going to be a bug in xrandr misconfiguring CRTC or in X server/ddx. If you can file a bug and include your Xorg.0.log along

It works just fine now:

legolas:~$ xrandr -s 2048x1536
legolas:~$ xrandr -s 2880x1620

It just wasn't able to get me out of that 8x8 mode that I got in due to a bug somewhere (not sure if it's enlightenment or Xorg).

Quoted 5 lines

with "xtrace xrandr -s anything" and if you can manage to get an xf86-video-intel --enable-debug=full log for the above, then I can tell you where the bug lies.

At any rate "xrandr --output eDP1 --preferred" is what you want.

I will try this next time if it happens again.

Thanks,
Marc

Signature · 8 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/  
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx