stv0991: Add flat device tree support
v3 cover stv0991: Add flat device tree support
This patchset adds device tree support for stv0991 soc.
Changes in v3:
- CONFIG_OF_EMBED replaced with CONFIG_OF_SEPARATE
Changes in v2:
- added commit messages for both patches.
Vikas Manocha (2):
stv0991: fdt: add stv0991 device tree
stv0991: use fdt for serial port platform data
arch/arm/dts/Makefile | 1 + arch/arm/dts/stv0991.dts | 23 +++++++++++++++++++++++ board/st/stv0991/stv0991.c | 2 ++ configs/stv0991_defconfig | 1 + include/configs/stv0991.h | 3 +++ 5 files changed, 30 insertions(+) create mode 100644 arch/arm/dts/stv0991.dts
Signature · 1 line
1.7.9.5
PATCH v3 1/2 stv0991: fdt: add stv0991 device tree
This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added.
---
Changes in v3:
- CONFIG_OF_EMBED replaced with CONFIG_OF_SEPARATE
Changes in v2:
- added commit message.
arch/arm/dts/Makefile | 1 + arch/arm/dts/stv0991.dts | 23 +++++++++++++++++++++++ configs/stv0991_defconfig | 1 + include/configs/stv0991.h | 3 +++ 4 files changed, 28 insertions(+) create mode 100644 arch/arm/dts/stv0991.dts
arch/arm/dts/Makefile +1 -0
@@ -54,6 +54,7 @@ dtb-$(CONFIG_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_socrates.dtb +dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ ls1021a-twr.dtb
arch/arm/dts/stv0991.dts new file +23 -0
@@ -0,0 +1,23 @@ +/dts-v1/; + +/ { + model = "ST STV0991 application board"; + compatible = "st,stv0991"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type="memory"; + reg = <0x0 0x198000>; + }; + + uart0: serial at 0x80406000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80406000 0x1000>; + clock = <2700000>; + }; +};
configs/stv0991_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ETH_DESIGNWARE=y CONFIG_NETDEVICES=y CONFIG_NET=y +CONFIG_DEFAULT_DEVICE_TREE="stv0991"
include/configs/stv0991.h +3 -0
@@ -80,4 +80,7 @@#define CONFIG_AUTOBOOT_PROMPT \ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay#undef CONFIG_HAS_VBAR +#define CONFIG_OF_SEPARATE +#define CONFIG_OF_CONTROL +#define CONFIG_OF_LIBFDT #endif /* __CONFIG_H */
Signature · 1 line
1.7.9.5
PATCH v3 1/2 stv0991: fdt: add stv0991 device tree
Quoted 13 lines · Vikas Manocha
This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added.
Signed-off-by Vikas Manocha <[email protected]>---
Changes in v3:
-CONFIG_OF_EMBEDreplaced withCONFIG_OF_SEPARATEChanges in v2:
- added commit message.
Quoted 6 lines
arch/arm/dts/Makefile | 1 + arch/arm/dts/stv0991.dts | 23 +++++++++++++++++++++++ configs/stv0991_defconfig | 1 + include/configs/stv0991.h | 3 +++ 4 files changed, 28 insertions(+) create mode 100644 arch/arm/dts/stv0991.dts
PATCH v3 1/2 stv0991: fdt: add stv0991 device tree
In reply to Vikas ManochaQuoted 6 lines · Vikas Manocha
This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added.
Signed-off-by Vikas Manocha <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150510/63ecf4cc/attachment.sig>
PATCH v3 2/2 stv0991: use fdt for serial port platform data
In reply to Vikas ManochaThis patch ignores the serial port static platform data at compilation time in case of device tree control.
---
Changes in v3: None
Changes in v2:
- added commit message.
board/st/stv0991/stv0991.c | 2 ++ 1 file changed, 2 insertions(+)
board/st/stv0991/stv0991.c +2 -0
@@ -21,6 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;struct gpio_regs *const gpioa_regs = (struct gpio_regs *)GPIOA_BASE_ADDR ; +#ifndef CONFIG_OF_CONTROL static const struct pl01x_serial_platdata serial_platdata = { .base =0x80406000 , .type = TYPE_PL011,
@@ -31,6 +32,7 @@ U_BOOT_DEVICE(stv09911_serials) = { .name = "serial_pl01x", .platdata = &serial_platdata, }; +#endif #ifdef CONFIG_SHOW_BOOT_PROGRESS void show_boot_progress (int progress)
Signature · 1 line
1.7.9.5
PATCH v3 2/2 stv0991: use fdt for serial port platform data
Quoted 5 lines · Vikas Manocha
This patch ignores the serial port static platform data at compilation time in case of device tree control.
Signed-off-by Vikas Manocha <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150510/c81b8058/attachment.sig>