ARM: dts: Gateworks GW5510 support (i.MX6)
Subsystems (3)
PATCH v2 1/1 ARM: dts: Gateworks GW5510 support (i.MX6)
Add support for the Gateworks GW5510 board featuring:
* i.MX6 SoC
* up to 512MB DDR3
* up to 2GB NAND flash
* 1x miniPCIe socket (with USB)
* HDMI out (micro-HDMI)
* HDMI in (micro-HDMI) (currently supported by only vendor kernel)
* TTL level I/O (supported by GW16111 breakout board):
* I2C
* 2x UART
* CAN
* 2x DIO (GPIO/PWM)
* USB OTG
For more details see:
http://www.gateworks.com/product/item/ventana-gw5510-single-board-computer
---
v2:
- updated license to dual-license
- removed unneeded 'regulator-always-on'
--- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-gw551x.dts | 55 ++++++ arch/arm/boot/dts/imx6q-gw551x.dts | 55 ++++++ arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 314 ++++++++++++++++++++++++++++++++++ 4 files changed, 426 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-gw551x.dts create mode 100644 arch/arm/boot/dts/imx6q-gw551x.dts create mode 100644 arch/arm/boot/dts/imx6qdl-gw551x.dtsi
arch/arm/boot/dts/Makefile +2 -0
@@ -254,6 +254,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \
@@ -280,6 +281,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \
arch/arm/boot/dts/imx6dl-gw551x.dts new file +55 -0
55 lines not on this page · raw message
arch/arm/boot/dts/imx6q-gw551x.dts new file +55 -0
55 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-gw551x.dtsi new file +314 -0
314 lines not on this page · raw message
Signature · 1 line
1.9.1
Fabio Estevam
reviewerPATCH v2 1/1 ARM: dts: Gateworks GW5510 support (i.MX6)
Quoted 14 lines · Tim Harvey
Add support for the Gateworks GW5510 board featuring:
* i.MX6 SoC
* up to 512MB DDR3
* up to 2GB NAND flash
* 1x miniPCIe socket (with USB)
* HDMI out (micro-HDMI)
* HDMI in (micro-HDMI) (currently supported by only vendor kernel)
* TTL level I/O (supported by GW16111 breakout board):
* I2C
* 2x UART
* CAN
* 2x DIO (GPIO/PWM)
* USB OTG
Quoted 4 lines
For more details see:
http://www.gateworks.com/product/item/ventana-gw5510-single-board-computerSigned-off-by Tim Harvey <[email protected]>
Looks good:
Shawn Guo
AppliedPATCH v2 1/1 ARM: dts: Gateworks GW5510 support (i.MX6)
In reply to Tim HarveyQuoted 14 lines · Tim Harvey
Add support for the Gateworks GW5510 board featuring:
* i.MX6 SoC
* up to 512MB DDR3
* up to 2GB NAND flash
* 1x miniPCIe socket (with USB)
* HDMI out (micro-HDMI)
* HDMI in (micro-HDMI) (currently supported by only vendor kernel)
* TTL level I/O (supported by GW16111 breakout board):
* I2C
* 2x UART
* CAN
* 2x DIO (GPIO/PWM)
* USB OTG
Quoted 4 lines
For more details see:
http://www.gateworks.com/product/item/ventana-gw5510-single-board-computerSigned-off-by Tim Harvey <[email protected]>
Applied, thanks.