Skip to contentSkip to conversation

ARM: imx: Remove eukrea_mbimxsd35 non-dt support

PATCH New Fabio Estevam 2 participants 2 messages May 8, 2015 – May 11, 2015

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: imx: Remove eukrea_mbimxsd35 non-dt support

From: Fabio Estevam <[email protected]>

eukrea_mbimxsd35 board has device tree support, so we can get rid of the board related files.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/mach-imx/Kconfig                      |  34 ---
 arch/arm/mach-imx/Makefile                     |   2 -
 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 318 -------------------------
 arch/arm/mach-imx/mach-cpuimx35.c              | 206 ----------------
 4 files changed, 560 deletions(-)
 delete mode 100644 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
 delete mode 100644 arch/arm/mach-imx/mach-cpuimx35.c
arch/arm/mach-imx/Kconfig +0 -34
index 3a3d3e9..388232c 100644
@@ -444,40 +444,6 @@ config MACH_MX35_3DS
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_EUKREA_CPUIMX35SD
-	bool "Support Eukrea CPUIMX35 Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX35
-	help
-	  Include support for Eukrea CPUIMX35 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35SD
-	default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 config MACH_VPR200
 	bool "Support VPR200 platform"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
arch/arm/mach-imx/Makefile +0 -2
index 0622ced..d195f4c 100644
@@ -68,8 +68,6 @@ obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
 # i.MX35 based machines
 obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
 obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c deleted +0 -318

318 lines not on this page · raw message

arch/arm/mach-imx/mach-cpuimx35.c deleted +0 -206

206 lines not on this page · raw message

Signature · 1 line
1.9.1