perf.data file format specification draft
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Steven, would be good if you could fill in some details on how trace data works.
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.
Thanks,
-Andi
---
perf.data format
This document describes the on-disk perf.data format, generated by perf record or perf inject and consumed by the other perf tools.
On a high level perf.data contains the events generated by the PMUs, plus metadata.
All fields are in native-endian of the machine that generated the perf.data.
When perf is writing to a pipe it uses a special version of the file format that does not rely on seeking to adjust data offsets. This format is not described here. The pipe version can be converted to normal perf.data with perf inject.
The file starts with a perf_header:
struct perf_header {
char magic[8]; /* PERFILE2 */
uint64_t size; /* size of the header */
uint64_t attr_size; /* size of an attribute in attrs */
struct perf_file_section attrs;
struct perf_file_section data;
struct perf_file_section event_types;
uint64_t flags;
uint64_t flags1[3];
};The magic number identifies the perf file and the version. Current perf versions use PERFILE2. Old perf versions generated a version 1 format (PERFFILE). Version 1 is not described here. The magic number also identifies the endian. When the magic value is 64bit byte swapped compared the file is in non-native endian.
A perf_file_section contains a pointer to another section of the perf file. The header contains three such pointers: for attributes, data and event types.
struct perf_file_section {
uint64_t offset; /* offset from start of file */
uint64_t size; /* size of the section */
};
Flags section:
The header is followed by different optional headers, described by the bits set in flags. Only headers for which the bit is set are included. Each header consists of a perf_file_section located after the initial header. The respective perf_file_section points to the data of the additional header and defines its size.
Some headers consist of strings, which are defined like this:
struct perf_header_string {
uint32_t len;
char string[len]; /* zero terminated */
};
Some headers consist of a sequence of strings, which start with a
struct perf_header_string_list {
uint32_t nr;
struct perf_header_string strings[nr]; /* variable length records */
};
The bits are the flags bits in a 256 bit bitmap starting with flags. These define the valid bits:
HEADER_RESERVED = 0, /* always cleared */
HEADER_FIRST_FEATURE = 1,
HEADER_TRACING_DATA = 1,
Describe me.
HEADER_BUILD_ID = 2,
The header consists of an sequence of build_id_event. The size of each record is defined by header.size (see perf_event.h). Each event defines a ELF build id for a executable file name for a pid. An ELF build id is a unique identifier assigned by the linker to an executable.
struct build_id_event {
struct perf_event_header header;
pid_t pid;
uint8_t build_id[24];
char filename[header.size - offsetof(struct build_id_event, filename)];
}; HEADER_HOSTNAME = 3,
A perf_header_string with the hostname where the data was collected (uname -n)
HEADER_OSRELEASE = 4,
A perf_header_string with the os release where the data was collected (uname -r)
HEADER_VERSION = 5,
A perf_header_string with the perf user tool version where the data was collected. This is the same as the version of the source tree the perf tool was built from.
HEADER_ARCH = 6,
A perf_header_string with the CPU architecture (uname -m)
HEADER_NRCPUS = 7,
A structure defining the number of CPUs.
struct nr_cpus {
uint32_t nr_cpus_online;
uint32_t nr_cpus_available; /* CPUs not yet onlined */
};
HEADER_CPUDESC = 8,
A perf_header_string with description of the CPU. On x86 this is the model name in /proc/cpuinfo
HEADER_CPUID = 9,
A perf_header_string with the exact CPU type. On x86 this is vendor,family,model,stepping. For example: GenuineIntel,6,69,1
HEADER_TOTAL_MEM = 10,
An uint64_t with the total memory in bytes.
HEADER_CMDLINE = 11,
A perf_header_string with the perf command line used to collect the data.
HEADER_EVENT_DESC = 12,
Another description of the perf_event_attrs, more detailed than header.attrs including IDs and names. See perf_event.h or the man page for a description of a struct perf_event_attr.
struct {
uint32_t nr; /* number of events */
uint32_t attr_size; /* size of each perf_event_attr */
struct {
struct perf_event_attr attr; /* size of attr_size */
uint32_t nr_ids;
struct perf_header_string event_string;
uint64_t ids[nr_ids];
} events[nr]; /* Variable length records */
}; HEADER_CPU_TOPOLOGY = 13,
String lists defining the core and CPU threads topology.
struct {
struct perf_header_string_list cores; /* Variable length */ struct perf_header_string_list threads; /* Variable length */
};
Example:
sibling cores : 0-3
sibling threads : 0-1
sibling threads : 2-3
HEADER_NUMA_TOPOLOGY = 14,
A list of NUMA node descriptions
struct {
uint32_t nr;
struct {
uint32_t nodenr;
uint64_t mem_total;
uint64_t mem_free;
struct perf_header_string cpus;
} nodes[nr]; /* Variable length records */
}; HEADER_BRANCH_STACK = 15,
Not implemented in perf.
HEADER_PMU_MAPPINGS = 16,
A list of PMU structures, defining the different PMUs supported by perf.
struct {
uint32_t nr;
struct pmu {
uint32_t pmu_type;
struct perf_header_string pmu_name;
} [nr]; /* Variable length records */
}; HEADER_GROUP_DESC = 17,
Description of counter groups ({...} in perf syntax)struct {
uint32_t nr;
struct {
struct perf_header_string string;
uint32_t leader_idx;
uint32_t nr_members;
} [nr]; /* Variable length records */
}; HEADER_AUXTRACE = 18,
Define additional auxtrace areas in the perf.data. auxtrace is used to store undecoded hardware tracing information, such as Intel Processor Trace data.
/**
* struct auxtrace_index_entry - indexes a AUX area tracing event within a
* perf.data file.
* @file_offset: offset within the perf.data file
* @sz: size of the event
*/
struct auxtrace_index_entry {
u64 file_offset;
u64 sz;
};#define PERF_AUXTRACE_INDEX_ENTRY_COUNT 256
/**
* struct auxtrace_index - index of AUX area tracing events within a perf.data
* file.
* @list: linking a number of arrays of entries
* @nr: number of entries
* @entries: array of entries
*/
struct auxtrace_index {
struct list_head list;
size_t nr;
struct auxtrace_index_entry entries[PERF_AUXTRACE_INDEX_ENTRY_COUNT];
};other bits are reserved and should ignored for now HEADER_FEAT_BITS = 256,
Attributes
This is an array of perf_event_attrs, each attr_size bytes long, which defines each event collected. See perf_event.h or the man page for a detailed description.
Data
This section is the bulk of the file. It consist of a stream of perf_events describing events. This matches the format generated by the kernel. See perf_event.h or the manpage for a detailed description.
Some notes on parsing:
Ordering
The events are not necessarily in time stamp order, as they can be collected in parallel on different CPUs. If the events should be processed in time order they need to be sorted first. It is possible to only do a partial sort using the FINISHED_ROUND event header (see below). perf record guarantees that there is no reordering over a FINISHED_ROUND.
ID vs IDENTIFIER
When the event stream contains multiple events each event is identified by an ID. This can be either through the PERF_SAMPLE_ID or the PERF_SAMPLE_IDENTIFIER header. The PERF_SAMPLE_IDENTIFIER header is at a fixed offset from the event header, which allows reliable parsing of the header. Relying on ID may be ambigious. IDENTIFIER is only supported by newer Linux kernels.
Perf record specific events:
In addition to the kernel generated event types perf record adds its own event types (in addition it also synthesizes some kernel events, for example MMAP events)
PERF_RECORD_USER_TYPE_START = 64, PERF_RECORD_HEADER_ATTR = 64,
struct attr_event {
struct perf_event_header header;
struct perf_event_attr attr;
uint64_t id[];
};PERF_RECORD_HEADER_EVENT_TYPE = 65, /* depreceated */
#define MAX_EVENT_NAME 64
struct perf_trace_event_type {
uint64_t event_id;
char name[MAX_EVENT_NAME];
};struct event_type_event {
struct perf_event_header header;
struct perf_trace_event_type event_type;
};PERF_RECORD_HEADER_TRACING_DATA = 66,
Describe me
struct tracing_data_event {
struct perf_event_header header;
uint32_t size;
};PERF_RECORD_HEADER_BUILD_ID = 67,
Define a ELF build ID for a referenced executable.
struct build_id_event; /* See above */
PERF_RECORD_FINISHED_ROUND = 68,
No event reordering over this header. No payload.
PERF_RECORD_ID_INDEX = 69,
Map event ids to CPUs and TIDs.
struct id_index_entry {
uint64_t id;
uint64_t idx;
uint64_t cpu;
uint64_t tid;
};struct id_index_event {
struct perf_event_header header;
uint64_t nr;
struct id_index_entry entries[nr];
};PERF_RECORD_AUXTRACE_INFO = 70,
Auxtrace type specific information. Describe me
struct auxtrace_info_event {
struct perf_event_header header;
uint32_t type;
uint32_t reserved__; /* For alignment */
uint64_t priv[];
};PERF_RECORD_AUXTRACE = 71,
Defines auxtrace data. Followed by the actual data. The contents of the auxtrace data is dependent on the event and the CPU. For example for Intel Processor Trace it contains Processor Trace data generated by the CPU.
struct auxtrace_event {
struct perf_event_header header;
uint64_t size;
uint64_t offset;
uint64_t reference;
uint32_t idx;
uint32_t tid;
uint32_t cpu;
uint32_t reserved__; /* For alignment */
};struct aux_event {
struct perf_event_header header;
uint64_t aux_offset;
uint64_t aux_size;
uint64_t flags;
};PERF_RECORD_AUXTRACE_ERROR = 72,
Describes an error in hardware tracing
enum auxtrace_error_type {
PERF_AUXTRACE_ERROR_ITRACE = 1,
PERF_AUXTRACE_ERROR_MAX
};
#define MAX_AUXTRACE_ERROR_MSG 64
struct auxtrace_error_event {
struct perf_event_header header;
uint32_t type;
uint32_t code;
uint32_t cpu;
uint32_t pid;
uint32_t tid;
uint32_t reserved__; /* For alignment */
uint64_t ip;
char msg[MAX_AUXTRACE_ERROR_MSG];
};Event types
Define the event attributes with their IDs.
An array bound by the perf_file_section size.
struct {
struct perf_event_attr attr; /* Size defined by header.attr_size */
struct perf_file_section ids;
}ids points to a array of uint64_t defining the ids for event attr attr.
References:
include/uapi/linux/perf_event.h
This is the canonical description of the kernel generated perf_events and the perf_event_attrs.
perf_events manpage
A manpage describing perf_event and perf_event_attr is here:
http://web.eece.maine.edu/~vweaver/projects/perf_events/programming.html
This tends to be slightly behind the kernel include, but has better descriptions. An (typically older) version of the man page may be included with the standard Linux man pages, available with "man perf_events"
pmu-tools
https://github.com/andikleen/pmu-tools/tree/master/parser
A definition of the perf.data format in python "construct" format is available in pmu-tools parser. This allows to read perf.data from python and dump it.
quipper
The quipper C++ parser is available at
https://chromium.googlesource.com/chromiumos/platform/chromiumos-wide-profiling/
Unfortunately this parser tends to be many versions behind and may not be able to parse data files generated by recent perf.
Em Thu, May 14, 2015 at 02:25:17PM +0200, Andi Kleen escreveu:
Quoted 7 lines
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
Quoted 5 lines
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Steven, would be good if you could fill in some details on how trace data works.
I guess that would be Frédéric, and also I think this is a good opportunity to remove some stuff that seem to be collected but unused, namely a kallsyms copy and maybe something else.
Quoted 3 lines
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.
Thanks for doing this work!
IIRC there is a presentation written by Jiri where parts of this is documented, lemme try to find it...
- Arnaldo
Em Thu, May 14, 2015 at 10:11:29AM -0300, Arnaldo Carvalho de Melo escreveu:
Quoted 18 lines
Em Thu, May 14, 2015 at 02:25:17PM +0200, Andi Kleen escreveu:
Quoted 7 lines
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
Quoted 5 lines
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Steven, would be good if you could fill in some details on how trace data works.
I guess that would be Frédéric, and also I think this is a good opportunity to remove some stuff that seem to be collected but unused, namely a kallsyms copy and maybe something else.
Quoted 8 lines
Quoted 3 lines
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.Thanks for doing this work!
IIRC there is a presentation written by Jiri where parts of this is documented, lemme try to find it...
http://tracingsummit.org/w/images/9/98/TracingSummit2014-Perf-CTF.pdf
Look from page 16 on.
- Arnaldo
Hi Arnaldo and Andi,
Quoted 11 lines · Arnaldo Carvalho de Melo
Em Thu, May 14, 2015 at 02:25:17PM +0200, Andi Kleen escreveu:
Quoted 10 lines
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Quoted 6 lines
Quoted 2 lines
Steven, would be good if you could fill in some details on how trace data works.
I guess that would be Frédéric, and also I think this is a good opportunity to remove some stuff that seem to be collected but unused, namely a kallsyms copy and maybe something else.
Let me try to describe. The tracing_data_get() does the work and it records the following for HEADER_TRACING_DATA in order:
* tracing header data
- file magic bytes (including someone's birthday :) )
- file version (it's 0.5 - the only thing I can see in diff with trace-cmd (version 6) is "saved-cmdline" file data which is unnecessary for perf
- byte order, size of long and page size of the system
* tracing header files
- $tracefs/events/header_page and $tracefs/events/header_event
- describe ftrace raw buffer format which is unnecessary for perf unless it reads the raw buffer directly (like my ftrace integration work?)
* ftrace event files
- format file for each event in $tracefs/events/ftrace directory
- this is same as below but precedes other events, not sure why it's needed
* (normal) event files
- format file for each tracepoint event
* /proc/kallsyms
- for kernel symbol resolution, unnecessary for perf
* tracing printk formats
- for trace_printk? unnecessary for perf
The last two can go away at least.
Thanks,
Namhyung
Quoted 16 lines
Quoted 4 lines
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.Thanks for doing this work!
IIRC there is a presentation written by Jiri where parts of this is documented, lemme try to find it...
- Arnaldo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Em Mon, May 18, 2015 at 01:21:33PM +0900, Namhyung Kim escreveu:
Quoted 17 lines
Hi Arnaldo and Andi,
Quoted 14 lines · Arnaldo Carvalho de Melo
Em Thu, May 14, 2015 at 02:25:17PM +0200, Andi Kleen escreveu:
Quoted 12 lines
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Steven, would be good if you could fill in some details on how trace data works.
Quoted 6 lines
Quoted 3 lines
I guess that would be Frédéric, and also I think this is a good opportunity to remove some stuff that seem to be collected but unused, namely a kallsyms copy and maybe something else.
Let me try to describe. The
tracing_data_get()does the work and it records the following forHEADER_TRACING_DATAin order:
Thanks for this! I'll try to write patches for the low hanging fruits, and try to work a bit on other issues, like only collecting the format files for events that the user asked for, perhaps even just for those that had samples :-)
- Arnaldo
Quoted 46 lines
* tracing header data
- file magic bytes (including someone's birthday :) )
- file version (it's 0.5 - the only thing I can see in diff with trace-cmd (version 6) is "saved-cmdline" file data which is unnecessary for perf
- byte order, size of long and page size of the system* tracing header files
- $tracefs/events/header_page and $tracefs/events/header_event
- describe ftrace raw buffer format which is unnecessary for perf unless it reads the raw buffer directly (like my ftrace integration work?)* ftrace event files
- format file for each event in $tracefs/events/ftrace directory
- this is same as below but precedes other events, not sure why it's needed* (normal) event files
- format file for each tracepoint event*
/proc/kallsyms
- for kernel symbol resolution, unnecessary for perf* tracing printk formats
- fortrace_printk? unnecessary for perfThe last two can go away at least.
Thanks,
NamhyungQuoted 16 lines
Quoted 4 lines
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.Thanks for doing this work!
IIRC there is a presentation written by Jiri where parts of this is documented, lemme try to find it...
- Arnaldo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 455 lines · Andi Kleen
Hi,
Since there are more and more consumers I started a description of the on-disk perf.data format. This does not replace the kernel perf event description or the manpage, but describes the parts that perf record adds.
So far it is still has some gaps and needs review. Eventually this should become part of the perf documentation.
Steven, would be good if you could fill in some details on how trace data works.
Adrian, would be good if you could fill in the missing bits for auxtrace/itrace.
Everyone else, please review and add missing information.Thanks,
-Andi---
perf.data format
This document describes the on-disk perf.data format, generated by perf record or perf inject and consumed by the other perf tools.
On a high level perf.data contains the events generated by the PMUs, plus metadata.
All fields are in native-endian of the machine that generated the perf.data.
When perf is writing to a pipe it uses a special version of the file format that does not rely on seeking to adjust data offsets. This format is not described here. The pipe version can be converted to normal perf.data with perf inject.
The file starts with a
perf_header:struct perf_header { char magic[8]; /* PERFILE2 */ uint64_t size; /* size of the header */ uint64_t attr_size; /* size of an attribute in attrs */ struct perf_file_section attrs; struct perf_file_section data; struct perf_file_section event_types; uint64_t flags; uint64_t flags1[3]; };The magic number identifies the perf file and the version. Current perf versions use PERFILE2. Old perf versions generated a version 1 format (PERFFILE). Version 1 is not described here. The magic number also identifies the endian. When the magic value is 64bit byte swapped compared the file is in non-native endian.
A
perf_file_sectioncontains a pointer to another section of the perf file. The header contains three such pointers: for attributes, data and event types.struct
perf_file_section{
uint64_toffset; /* offset from start of file */
uint64_tsize; /* size of the section */
};Flags section:
The header is followed by different optional headers, described by the bits set in flags. Only headers for which the bit is set are included. Each header consists of a
perf_file_sectionlocated after the initial header. The respectiveperf_file_sectionpoints to the data of the additional header and defines its size.Some headers consist of strings, which are defined like this:
struct
perf_header_string{
uint32_tlen;
char string[len]; /* zero terminated */
};Some headers consist of a sequence of strings, which start with a
struct
perf_header_string_list{
uint32_tnr;
structperf_header_stringstrings[nr]; /* variable length records */
};The bits are the flags bits in a 256 bit bitmap starting with flags. These define the valid bits:
HEADER_RESERVED = 0, /* always cleared */ HEADER_FIRST_FEATURE = 1, HEADER_TRACING_DATA = 1,Describe me.
HEADER_BUILD_ID= 2,The header consists of an sequence of
build_id_event. The size of each record is defined by header.size (seeperf_event.h). Each event defines a ELF build id for a executable file name for a pid. An ELF build id is a unique identifier assigned by the linker to an executable.struct build_id_event { struct perf_event_header header; pid_t pid; uint8_t build_id[24]; char filename[header.size - offsetof(struct build_id_event, filename)]; };
HEADER_HOSTNAME= 3,A
perf_header_stringwith the hostname where the data was collected (uname -n)
HEADER_OSRELEASE= 4,A
perf_header_stringwith the os release where the data was collected (uname -r)
HEADER_VERSION= 5,A
perf_header_stringwith the perf user tool version where the data was collected. This is the same as the version of the source tree the perf tool was built from.
HEADER_ARCH= 6,A
perf_header_stringwith the CPU architecture (uname -m)
HEADER_NRCPUS= 7,A structure defining the number of CPUs.
struct
nr_cpus{
uint32_tnr_cpus_online;
uint32_tnr_cpus_available; /* CPUs not yet onlined */
};
HEADER_CPUDESC= 8,A
perf_header_stringwith description of the CPU. On x86 this is the model name in/proc/cpuinfo
HEADER_CPUID= 9,A
perf_header_stringwith the exact CPU type. On x86 this is vendor,family,model,stepping. For example: GenuineIntel,6,69,1HEADER_TOTAL_MEM = 10,An
uint64_twith the total memory in bytes.
HEADER_CMDLINE= 11,A
perf_header_stringwith the perf command line used to collect the data.HEADER_EVENT_DESC = 12,Another description of the
perf_event_attrs, more detailed than header.attrs including IDs and names. Seeperf_event.hor the man page for a description of a structperf_event_attr.struct { uint32_t nr; /* number of events */ uint32_t attr_size; /* size of each perf_event_attr */ struct { struct perf_event_attr attr; /* size of attr_size */ uint32_t nr_ids; struct perf_header_string event_string; uint64_t ids[nr_ids]; } events[nr]; /* Variable length records */ };
HEADER_CPU_TOPOLOGY= 13,String lists defining the core and CPU threads topology.
struct {
structperf_header_string_listcores; /* Variable length */ structperf_header_string_listthreads; /* Variable length */
};Example:
sibling cores : 0-3
sibling threads : 0-1
sibling threads : 2-3
HEADER_NUMA_TOPOLOGY= 14,A list of NUMA node descriptions
struct { uint32_t nr; struct { uint32_t nodenr; uint64_t mem_total; uint64_t mem_free; struct perf_header_string cpus; } nodes[nr]; /* Variable length records */ };
HEADER_BRANCH_STACK= 15,Not implemented in perf.
HEADER_PMU_MAPPINGS= 16,A list of PMU structures, defining the different PMUs supported by perf.
struct { uint32_t nr; struct pmu { uint32_t pmu_type; struct perf_header_string pmu_name; } [nr]; /* Variable length records */ };
HEADER_GROUP_DESC= 17,Description of counter groups ({...} in perf syntax)
struct { uint32_t nr; struct { struct perf_header_string string; uint32_t leader_idx; uint32_t nr_members; } [nr]; /* Variable length records */ };
HEADER_AUXTRACE= 18,Define additional auxtrace areas in the perf.data. auxtrace is used to store undecoded hardware tracing information, such as Intel Processor Trace data.
/**
* structauxtrace_index_entry- indexes a AUX area tracing event within a
* perf.data file.
* @file_offset: offset within the perf.data file
* @sz: size of the event
*/struct auxtrace_index_entry { u64 file_offset; u64 sz; };#define
PERF_AUXTRACE_INDEX_ENTRY_COUNT256/**
* structauxtrace_index- index of AUX area tracing events within a perf.data
* file.
* @list: linking a number of arrays of entries
* @nr: number of entries
* @entries: array of entries
*/struct auxtrace_index { struct list_head list; size_t nr; struct auxtrace_index_entry entries[PERF_AUXTRACE_INDEX_ENTRY_COUNT]; };other bits are reserved and should ignored for now
HEADER_FEAT_BITS= 256,Attributes
This is an array of
perf_event_attrs, eachattr_sizebytes long, which defines each event collected. Seeperf_event.hor the man page for a detailed description.Data
This section is the bulk of the file. It consist of a stream of
perf_eventsdescribing events. This matches the format generated by the kernel. Seeperf_event.hor the manpage for a detailed description.Some notes on parsing:
Ordering
The events are not necessarily in time stamp order, as they can be collected in parallel on different CPUs. If the events should be processed in time order they need to be sorted first. It is possible to only do a partial sort using the
FINISHED_ROUNDevent header (see below). perf record guarantees that there is no reordering over aFINISHED_ROUND.ID vs IDENTIFIER
When the event stream contains multiple events each event is identified by an ID. This can be either through the
PERF_SAMPLE_IDor thePERF_SAMPLE_IDENTIFIERheader. ThePERF_SAMPLE_IDENTIFIERheader is at a fixed offset from the event header, which allows reliable parsing of the header. Relying on ID may be ambigious. IDENTIFIER is only supported by newer Linux kernels.Perf record specific events:
In addition to the kernel generated event types perf record adds its own event types (in addition it also synthesizes some kernel events, for example MMAP events)
PERF_RECORD_USER_TYPE_START= 64,
PERF_RECORD_HEADER_ATTR= 64,struct attr_event { struct perf_event_header header; struct perf_event_attr attr; uint64_t id[]; };
PERF_RECORD_HEADER_EVENT_TYPE= 65, /* depreceated */#define
MAX_EVENT_NAME64struct perf_trace_event_type { uint64_t event_id; char name[MAX_EVENT_NAME]; };struct event_type_event { struct perf_event_header header; struct perf_trace_event_type event_type; };
PERF_RECORD_HEADER_TRACING_DATA= 66,Describe me
struct tracing_data_event { struct perf_event_header header; uint32_t size; };
PERF_RECORD_HEADER_BUILD_ID= 67,Define a ELF build ID for a referenced executable.
struct
build_id_event; /* See above */
PERF_RECORD_FINISHED_ROUND= 68,No event reordering over this header. No payload.
PERF_RECORD_ID_INDEX= 69,Map event ids to CPUs and TIDs.
struct id_index_entry { uint64_t id; uint64_t idx; uint64_t cpu; uint64_t tid; };struct id_index_event { struct perf_event_header header; uint64_t nr; struct id_index_entry entries[nr]; };
PERF_RECORD_AUXTRACE_INFO= 70,Auxtrace type specific information. Describe me
struct auxtrace_info_event { struct perf_event_header header; uint32_t type; uint32_t reserved__; /* For alignment */ uint64_t priv[]; };
PERF_RECORD_AUXTRACE= 71,Defines auxtrace data. Followed by the actual data. The contents of the auxtrace data is dependent on the event and the CPU. For example for Intel Processor Trace it contains Processor Trace data generated by the CPU.
struct auxtrace_event { struct perf_event_header header; uint64_t size; uint64_t offset; uint64_t reference; uint32_t idx; uint32_t tid; uint32_t cpu; uint32_t reserved__; /* For alignment */ };struct aux_event { struct perf_event_header header; uint64_t aux_offset; uint64_t aux_size; uint64_t flags; };
PERF_RECORD_AUXTRACE_ERROR= 72,Describes an error in hardware tracing
enum
auxtrace_error_type{
PERF_AUXTRACE_ERROR_ITRACE= 1,
PERF_AUXTRACE_ERROR_MAX
};#define
MAX_AUXTRACE_ERROR_MSG64struct auxtrace_error_event { struct perf_event_header header; uint32_t type; uint32_t code; uint32_t cpu; uint32_t pid; uint32_t tid; uint32_t reserved__; /* For alignment */ uint64_t ip; char msg[MAX_AUXTRACE_ERROR_MSG]; };Event types
Define the event attributes with their IDs.
An array bound by the
perf_file_sectionsize.struct { struct perf_event_attr attr; /* Size defined by header.attr_size */ struct perf_file_section ids; }ids points to a array of
uint64_tdefining the ids for event attr attr.References:
include/uapi/linux/perf_event.hThis is the canonical description of the kernel generated
perf_eventsand theperf_event_attrs.
perf_eventsmanpageA manpage describing
perf_eventandperf_event_attris here:
http://web.eece.maine.edu/~vweaver/projects/perf_events/programming.html
This tends to be slightly behind the kernel include, but has better descriptions. An (typically older) version of the man page may be included with the standard Linux man pages, available with "manperf_events"pmu-tools
https://github.com/andikleen/pmu-tools/tree/master/parser
A definition of the perf.data format in python "construct" format is available in pmu-tools parser. This allows to read perf.data from python and dump it.
Quoted 7 lines
quipper
The quipper C++ parser is available at
https://chromium.googlesource.com/chromiumos/platform/chromiumos-wide-profiling/
Unfortunately this parser tends to be many versions behind and may not be able to parse data files generated by recent perf.
If you tell me what is missing, I can talk to the ChromeOS people to get the support updated to 4.1.
Quoted 7 lines · On Fri, 15 May 2015 01:22:51 -0700 Stephane Eranian <[email protected]> wrote:
Quoted 5 lines
The quipper C++ parser is available at
https://chromium.googlesource.com/chromiumos/platform/chromiumos-wide-profiling/
Unfortunately this parser tends to be many versions behind and may not be able to parse data files generated by recent perf.If you tell me what is missing, I can talk to the ChromeOS people to get the support updated to 4.1.
Please learn to trim your emails. Adding this at the end of a 1000 lines of quoted text causes everyone else to get finger cramps by scrolling through.
-- Steve
Quoted 8 lines · Steven Rostedt
Quoted 5 lines · On Fri, 15 May 2015 01:22:51 -0700 Stephane Eranian <[email protected]> wrote:
Quoted 5 lines
The quipper C++ parser is available at
https://chromium.googlesource.com/chromiumos/platform/chromiumos-wide-profiling/
Unfortunately this parser tends to be many versions behind and may not be able to parse data files generated by recent perf.
Quoted 6 lines
Quoted 2 lines
If you tell me what is missing, I can talk to the ChromeOS people to get the support updated to 4.1.
Please learn to trim your emails. Adding this at the end of a 1000 lines of quoted text causes everyone else to get finger cramps by scrolling through.
I hope you used the time though to actually review the file? @) How about the missing trace point definitions? I need some help on that.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
Quoted 2 lines · On Fri, 15 May 2015 15:19:52 +0200 Andi Kleen <[email protected]> wrote:
I hope you used the time though to actually review the file? @) How about the missing trace point definitions? I need some help on that.
I didn't write that code. Although some of it was taken from trace-cmd. I'm not sure I can help much here.
-- Steve
Quoted 7 lines
Quoted 5 lines
The quipper C++ parser is available at
https://chromium.googlesource.com/chromiumos/platform/chromiumos-wide-profiling/
Unfortunately this parser tends to be many versions behind and may not be able to parse data files generated by recent perf.If you tell me what is missing, I can talk to the ChromeOS people to get the support updated to 4.1.
they just need to try it and fix it until it works. And then retry every three months when a new perf comes out.
Part of the problem is that programing style with excessive asserting. If you add that many asserts you also need to keep up with the input data. It's the opposite of "be liberal what you accept"
Right now it still bombs out for various records that newer perf adds.
I send some patches for autofdo to hack around that, but they were not quite enough:
https://gcc.gnu.org/ml/gcc/2015-04/msg00271.html
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.