flashrom: Bump to version 0.9.8
PATCH v2 1/1 flashrom: Bump to version 0.9.8
This version adds support for new Intel SoC (e.g. BayTrail) and spi over usb devices such as pickit2 and ftdi usb-spi.
---
Changes v1 -> v2:
propagate the dependencies for libusb and libftdi Note, libftdi1 is not supported, it only uses libftdi.
--- package/flashrom/Config.in | 5 +++++ package/flashrom/flashrom.mk | 4 ++-- 2 files changed, 7 insertions(+), 2 deletions(-)
package/flashrom/Config.in +5 -0
@@ -1,9 +1,14 @@ config BR2_PACKAGE_FLASHROM bool "flashrom" select BR2_PACKAGE_PCIUTILS + select BR2_PACKAGE_LIBUSB + select BR2_PACKAGE_LIBUSB_COMPAT + select BR2_PACKAGE_LIBFTDI # dmidecode is only a runtime dependency select BR2_PACKAGE_DMIDECODE depends on BR2_i386 || BR2_x86_64 + depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_ARCH_HAS_ATOMICS # libftdi help BIOS-updating utility. Requires PCIUtils libraries.
package/flashrom/flashrom.mk +2 -2
@@ -4,10 +4,10 @@ # ################################################################################ -FLASHROM_VERSION = 0.9.7 +FLASHROM_VERSION = 0.9.8 FLASHROM_SOURCE = flashrom-$(FLASHROM_VERSION).tar.bz2 FLASHROM_SITE = http://download.flashrom.org/releases -FLASHROM_DEPENDENCIES = pciutils +FLASHROM_DEPENDENCIES = pciutils libusb libusb-compat libftdi FLASHROM_LICENSE = GPLv2+ FLASHROM_LICENSE_FILES = COPYING
Signature · 1 line
1.9.1
PATCH v2 1/1 flashrom: Bump to version 0.9.8
Dear Florent Valette,
Quoted 4 lines · Florent Valette
This version adds support for new Intel SoC (e.g. BayTrail) and spi over usb devices such as pickit2 and ftdi usb-spi.
Signed-off-by Florent Valette <[email protected]>
This is the third time you send a "v2" of this patch. Which one is really the v2 ?
You should increment the version number whenever there is a change made to the patch.
If there are no changes, then there is no need to resend the patch.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH v2 1/1 flashrom: Bump to version 0.9.8
Hi all, Thomas,
The fist time, i misused "git send-email", my bad, i tried to reply and send v2 in the same time.
Then, i sent it to buildroot at busybox.net and buildroot at buildroot.org, there are two emails addresses for the mailing list and this is not obvious which one is the right one. Some people sends to buildroot.org, others to busybox.net. As i only received the cc (git send-email sends cc to sender by default) to the mail send to @buildroot.org, i re-send it to @busybox.net (i received twice this one, the one from mailing list and the cc to myself).
Sorry for the inconvenience.
Florent.
2015-05-17 12:56 GMT+02:00 Thomas Petazzoni
<[email protected]>:
Quoted 23 lines
Dear Florent Valette,
Quoted 4 lines · Florent Valette
This version adds support for new Intel SoC (e.g. BayTrail) and spi over usb devices such as pickit2 and ftdi usb-spi.
Signed-off-by Florent Valette <[email protected]>This is the third time you send a "v2" of this patch. Which one is really the v2 ?
You should increment the version number whenever there is a change made to the patch.
If there are no changes, then there is no need to resend the patch.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
PATCH v2 1/1 flashrom: Bump to version 0.9.8
Florent,
Quoted 2 lines · Florent Valette
The fist time, i misused "git send-email", my bad, i tried to reply and send v2 in the same time.
No problem.
Quoted 7 lines
Then, i sent it to buildroot at busybox.net and buildroot at buildroot.org, there are two emails addresses for the mailing list and this is not obvious which one is the right one. Some people sends to buildroot.org, others to busybox.net. As i only received the cc (git send-email sends cc to sender by default) to the mail send to @buildroot.org, i re-send it to @busybox.net (i received twice this one, the one from mailing list and the cc to myself).
Yes, I know it's a bit confusing. Just use one or the other, they both send to the same location.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Thomas Petazzoni
AppliedPATCH v2 1/1 flashrom: Bump to version 0.9.8
In reply to Florent ValetteDear Florent Valette,
Quoted 9 lines · Florent Valette
This version adds support for new Intel SoC (e.g. BayTrail) and spi over usb devices such as pickit2 and ftdi usb-spi.
Signed-off-by Florent Valette <[email protected]>---
Changes v1 -> v2:
propagate the dependencies for libusb and libftdi Note, libftdi1 is not supported, it only uses libftdi.
Applied, thanks. I've done a few changes:
[Thomas:
- add missing Config.in comment about the thread dependency
- remove 'Requires PCIUtils libraries' from the Config.in help text, since flashrom now requires more than PCIUtils library, and we typically don't document such dependencies in Config.in help texts.]
Also, I did some followup commits to improve the Config.in help text, and add a hash file.
Finally, the pciutils, libusb and libftdi dependencies could be made optional, since they are only needed for some of the flashrom drivers. However, the mechanism to select each flashrom drivers is a bit annoying, and I'm not sure it's really worth the effort.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com