Skip to contentSkip to conversation

ARM: imx: clk-v610: Add clock for I2C2 and I2C3

PATCH New Mirza Krak 2 participants 2 messages May 20, 2015 – May 21, 2015

Subsystems (3)
Arm i.MX and Layerscape Common clk NXP i.MX clock drivers
lore
Share & tools
lore

Mirza Krak

author
#0 lore raw

PATCH v2 1/1 ARM: imx: clk-v610: Add clock for I2C2 and I2C3

From: Mirza Krak <[email protected]>

Add support for clock gating of I2C2 and I2C3.
We use I2C2 in a (not yet mainlined) device tree.

Signed-off-by Mirza Krak <[email protected]>

---

Changes since v1:
* Rebased on branch git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git imx/soc

 drivers/clk/imx/clk-vf610.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/imx/clk-vf610.c +2 -0
index 1c2d324..bff45ea 100644
@@ -273,6 +273,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 
 	clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
 	clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
+	clk[VF610_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(6));
+	clk[VF610_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(7));
 
 	clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12));
 	clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13));
Signature · 1 line
2.1.0
Applied
#1 lore raw

PATCH v2 1/1 ARM: imx: clk-v610: Add clock for I2C2 and I2C3

Quoted 6 lines · Mirza Krak

From: Mirza Krak <[email protected]>

Add support for clock gating of I2C2 and I2C3.
We use I2C2 in a (not yet mainlined) device tree.

Signed-off-by Mirza Krak <[email protected]>

Applied, thanks.