tty: remove platform_sysrq_reset_seq
Subsystems (2)
PATCH 1/1 tty: remove platform_sysrq_reset_seq
The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel.
Now the code is producing warnings when built with gcc-5.1:
drivers/tty/sysrq.c: In function 'sysrq_init':drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds]
key = platform_sysrq_reset_seq[i];
We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file.
drivers/tty/sysrq.c +1 -17
@@ -55,8 +55,7 @@static int __read_mostly sysrq_enabled =CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE ;static bool __read_mostly sysrq_always_enabled; -unsigned short platform_sysrq_reset_seq[]__weak = {KEY_RESERVED }; -int sysrq_reset_downtime_ms__weak ; +static int sysrq_reset_downtime_ms;static bool sysrq_on (void ) {
@@ -950,23 +949,8 @@ static bool sysrq_handler_registered;static inline void sysrq_register_handler (void ) { -unsigned short key;int error; -int i; - -/* First check if a __weak interface was instantiated. */ -for (i =0 ; i <ARRAY_SIZE (sysrq_reset_seq); i++) { - key = platform_sysrq_reset_seq[i]; -if (key ==KEY_RESERVED || key >KEY_MAX ) -break ; - sysrq_reset_seq[sysrq_reset_seq_len++] = key; - } - -/* -* DT configuration takes precedence over anything that would -* have been defined via the __weak interface. -*/ sysrq_of_get_keyreset_config (); error =input_register_handler (&sysrq_handler);
Quoted 15 lines · Arnd Bergmann
The
platform_sysrq_reset_seqcode was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel.Now the code is producing warnings when built with gcc-5.1:
drivers/tty/sysrq.c: In function 'sysrq_init':drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds]
key = platform_sysrq_reset_seq[i];
Quoted 7 lines
We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the
/sys/module/sysrq/parameters/reset_seqfile.Signed-off-by Arnd Bergmann <[email protected]>Fixes 154b7a489a ("Input: sysrq - allow specifying alternate reset sequence")
Mathieu, are you OK with dropping this?
Quoted 40 lines
drivers/tty/sysrq.c +1
-17@@ -55,8 +55,7 @@static int __read_mostly sysrq_enabled =CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE ;static bool __read_mostly sysrq_always_enabled; -unsigned short platform_sysrq_reset_seq[]__weak = {KEY_RESERVED }; -int sysrq_reset_downtime_ms__weak ; +static int sysrq_reset_downtime_ms;static bool sysrq_on (void ) {@@ -950,23 +949,8 @@ static bool sysrq_handler_registered;static inline void sysrq_register_handler (void ) { -unsigned short key;int error; -int i; - -/* First check if a __weak interface was instantiated. */ -for (i =0 ; i <ARRAY_SIZE (sysrq_reset_seq); i++) { - key = platform_sysrq_reset_seq[i]; -if (key ==KEY_RESERVED || key >KEY_MAX ) -break ; - sysrq_reset_seq[sysrq_reset_seq_len++] = key; - } - -/* -* DT configuration takes precedence over anything that would -* have been defined via the __weak interface. -*/ sysrq_of_get_keyreset_config (); error =input_register_handler (&sysrq_handler);
Signature · 1 line
Dmitry
Quoted 6 lines · On Thursday 21 May 2015 11:11:28 Arnd Bergmann wrote:
drivers/tty/sysrq.c +0
-0
drivers/tty/sysrq.c line 61
Quoted 9 lines
drivers/tty/sysrq.c +1
-2@@ -55,8 +55,7 @@static int __read_mostly sysrq_enabled =CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE ;static bool __read_mostly sysrq_always_enabled; -unsigned short platform_sysrq_reset_seq[]__weak = {KEY_RESERVED }; -int sysrq_reset_downtime_ms__weak ; +static int sysrq_reset_downtime_ms;static bool sysrq_on (void ) {
It turns out that the variable is now potentially unused, and we get a warning when CONFIG_INPUT is disabled. I'll send a fixed v2 of this patch.
Arnd