psmouse - focaltech report finger width to userspace
Subsystems (2)
PATCH 1/1 psmouse - focaltech report finger width to userspace
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0. 0xff is reported, when a large contact area is detected.
This can be handled in userspace.
--- drivers/input/mouse/focaltech.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
drivers/input/mouse/focaltech.c +17 -3
@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {
@@ -112,7 +122,7 @@ struct focaltech_data {struct focaltech_hw_state state; }; -static void focaltech_report_state (struct psmouse *psmouse) +static void focaltech_report_state (struct psmouse *psmouse,bool abs) {struct focaltech_data *priv = psmouse->private;struct focaltech_hw_state *state = &priv->state;
@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +if (abs)input_report_abs (dev,ABS_TOOL_WIDTH , state->width); } }input_mt_report_pointer_emulation (dev, true);
@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }
@@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse *psmouse)switch (packet[0 ] &0xf ) {case FOC_TOUCH :focaltech_process_touch_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;case FOC_ABS :focaltech_process_abs_packet (psmouse, packet); +focaltech_report_state (psmouse, true);break ;case FOC_REL :focaltech_process_rel_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;default :psmouse_err (psmouse,"Unknown packet type: %02x\n" , packet[0 ]);break ; } - -focaltech_report_state (psmouse); }static psmouse_ret_t focaltech_process_byte (struct psmouse *psmouse)
@@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }
Signature · 1 line
1.9.1
Dmitry Torokhov
maintainerQuoted 6 lines · Dmitry Tunin
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is
0x10-0x70. Second half-byte is always 0.0xffis reported, when a large contact area is detected.
This can be handled in userspace.Signed-off-by Dmitry Tunin <[email protected]>
Let's add a few people...
Quoted 35 lines
--- drivers/input/mouse/focaltech.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)drivers/input/mouse/focaltech.c +11
-1@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {@@ -112,7 +122,7 @@ struct focaltech_data {struct focaltech_hw_state state; }; -static void focaltech_report_state (struct psmouse *psmouse) +static void focaltech_report_state (struct psmouse *psmouse,bool abs) {struct focaltech_data *priv = psmouse->private;struct focaltech_hw_state *state = &priv->state;
drivers/input/mouse/focaltech.c static void focaltech_report_state(struct psmouse *psmouse) · line 150
Quoted 4 lines
drivers/input/mouse/focaltech.c +1
-0@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +if (abs)input_report_abs (dev,ABS_TOOL_WIDTH , state->width);
I am not sure this condition and the change in focaltech_process_packet are needed. The relative packets augment absolute one and we expect width not change so we can always report state->width (either updated or cached) and input core will drop dupes.
Quoted 48 lines
drivers/input/mouse/focaltech.c +5
-2} }input_mt_report_pointer_emulation (dev, true);@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }@@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse *psmouse)switch (packet[0 ] &0xf ) {case FOC_TOUCH :focaltech_process_touch_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;case FOC_ABS :focaltech_process_abs_packet (psmouse, packet); +focaltech_report_state (psmouse, true);break ;case FOC_REL :focaltech_process_rel_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;default :psmouse_err (psmouse,"Unknown packet type: %02x\n" , packet[0 ]);break ; } - -focaltech_report_state (psmouse); }static psmouse_ret_t focaltech_process_byte (struct psmouse *psmouse)@@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }Signature · 1 line
1.9.1
Thanks.
Signature · 1 line
Dmitry
30.05.2015 02:37, Dmitry Torokhov пишет:
Quoted 39 lines · Dmitry Tunin
Quoted 6 lines
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is
0x10-0x70. Second half-byte is always 0.0xffis reported, when a large contact area is detected.
This can be handled in userspace.Signed-off-by Dmitry Tunin <[email protected]>Let's add a few people...
Quoted 29 lines
--- drivers/input/mouse/focaltech.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)drivers/input/mouse/focaltech.c +10
-0@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {@@ -112,7 +122,7 @@ struct focaltech_data {struct focaltech_hw_state state; };
Quoted 15 lines
drivers/input/mouse/focaltech.c static void focaltech_report_state(struct psmouse *psmouse) · line 150
Quoted 10 lines
drivers/input/mouse/focaltech.c +2
-1-static void focaltech_report_state (struct psmouse *psmouse) +static void focaltech_report_state (struct psmouse *psmouse,bool abs) {struct focaltech_data *priv = psmouse->private;struct focaltech_hw_state *state = &priv->state;@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +if (abs)input_report_abs (dev,ABS_TOOL_WIDTH , state->width);I am not sure this condition and the change in
focaltech_process_packetare needed. The relative packets augment absolute one and we expect width not change so we can always reportstate->width(either updated or cached) and input core will drop dupes.
That's what I started from. Just added a report line. But this confused user space.
A touch packet reporting that a finger does not touch the pad together with width reported for same finger gets xorg-synaptics to ignore it. E.g two-finger scrolling becomes unusable. xorg ignores "untouch" event and when fingers touch again, cursor jumps.
So finally this solution looks clean and safe to report width only with abs.
I sent some versions of these to linux-input mailing list and to Mathias, but forgot to add Dmitry.
I added a similar patch to my ppa, with backport of focaltech driver for Ubuntu 3.19 kernel users. There are >500 installs. No issues reported.
Quoted 37 lines
Quoted 37 lines
drivers/input/mouse/focaltech.c +4
-2} }input_mt_report_pointer_emulation (dev, true);@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }@@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse *psmouse)switch (packet[0 ] &0xf ) {case FOC_TOUCH :focaltech_process_touch_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;case FOC_ABS :focaltech_process_abs_packet (psmouse, packet); +focaltech_report_state (psmouse, true);break ;case FOC_REL :focaltech_process_rel_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;default :psmouse_err (psmouse,"Unknown packet type: %02x\n" , packet[0 ]);break ; } - -focaltech_report_state (psmouse); }
Quoted 15 lines
Quoted 12 lines
drivers/input/mouse/focaltech.c +1
-0static psmouse_ret_t focaltech_process_byte (struct psmouse *psmouse)@@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }Signature · 1 line
1.9.1Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
30.05.2015 02:37, Dmitry Torokhov пишет:
Quoted 91 lines · Dmitry Tunin
Quoted 6 lines
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is
0x10-0x70. Second half-byte is always 0.0xffis reported, when a large contact area is detected.
This can be handled in userspace.Signed-off-by Dmitry Tunin <[email protected]>Let's add a few people...
Quoted 35 lines
--- drivers/input/mouse/focaltech.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)drivers/input/mouse/focaltech.c +11
-1@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {@@ -112,7 +122,7 @@ struct focaltech_data {struct focaltech_hw_state state; }; -static void focaltech_report_state (struct psmouse *psmouse) +static void focaltech_report_state (struct psmouse *psmouse,bool abs) {struct focaltech_data *priv = psmouse->private;struct focaltech_hw_state *state = &priv->state;drivers/input/mouse/focaltech.c static void focaltech_report_state(struct psmouse *psmouse) · line 150
Quoted 4 lines
drivers/input/mouse/focaltech.c +1
-0@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +if (abs)input_report_abs (dev,ABS_TOOL_WIDTH , state->width);I am not sure this condition and the change in
focaltech_process_packetare needed. The relative packets augment absolute one and we expect width not change so we can always reportstate->width(either updated or cached) and input core will drop dupes.Quoted 36 lines
drivers/input/mouse/focaltech.c +4
-2} }input_mt_report_pointer_emulation (dev, true);@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }@@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse *psmouse)switch (packet[0 ] &0xf ) {case FOC_TOUCH :focaltech_process_touch_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;case FOC_ABS :focaltech_process_abs_packet (psmouse, packet); +focaltech_report_state (psmouse, true);break ;case FOC_REL :focaltech_process_rel_packet (psmouse, packet); +focaltech_report_state (psmouse, false);break ;default :psmouse_err (psmouse,"Unknown packet type: %02x\n" , packet[0 ]);break ; } - -focaltech_report_state (psmouse); }
Quoted 15 lines
Quoted 12 lines
drivers/input/mouse/focaltech.c +1
-0static psmouse_ret_t focaltech_process_byte (struct psmouse *psmouse)@@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }Signature · 1 line
1.9.1Thanks.
Hi Dmitry,
I tested it again and it appears that you are correct. In previous versions I stored width of each finger in state->fingers[finger].width. And it confused everything up. Then I changed it to state->width, because there is only one relevant width.
Really duplicates are removed. I am sending v 2.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 1/1 psmouse - focaltech report finger width to userspace
In reply to Dmitry TorokhovFocaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0. 0xff is reported, when a large contact area is detected.
This can be handled in userspace.
--- drivers/input/mouse/focaltech.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/input/mouse/focaltech.c +13 -0
@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {
@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +input_report_abs (dev,ABS_TOOL_WIDTH , state->width); } }input_mt_report_pointer_emulation (dev, true);
@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }
@@ -331,6 +343,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }
Signature · 1 line
1.9.1
Quoted 6 lines · Dmitry Tunin
Focaltech touchpads report finger width in packet[5] of absolute packet. Range for width in raw format is
0x10-0x70. Second half-byte is always 0.0xffis reported, when a large contact area is detected.
This can be handled in userspace.Signed-off-by Dmitry Tunin <[email protected]>
Applied, thank you.
Quoted 52 lines
--- drivers/input/mouse/focaltech.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)drivers/input/mouse/focaltech.c +13
-0@@ -105,6 +105,16 @@ struct focaltech_hw_state {/* True if the clickpad has been pressed. */ bool pressed; + +/* +* Finger width 0-7 and 15 for a very big contact area. +* 15 value stays until the finger is released. +* Width is reported only in absolute packets. +* Since hardware reports width only for last touching finger, +* there is no need to store width for every specific finger, so +* we keep only last value reported. +*/ +unsigned int width; };struct focaltech_data {@@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)input_report_abs (dev,ABS_MT_POSITION_X , clamped_x);input_report_abs (dev,ABS_MT_POSITION_Y , priv->y_max - clamped_y); +input_report_abs (dev,ABS_TOOL_WIDTH , state->width); } }input_mt_report_pointer_emulation (dev, true);@@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->fingers[finger].x = ((packet[1 ] &0xf ) <<8 ) | packet[2 ]; state->fingers[finger].y = (packet[3 ] <<8 ) | packet[4 ]; + state->width = packet[5 ] >>4 ; state->fingers[finger].valid = true; }@@ -331,6 +343,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)__set_bit (EV_ABS , dev->evbit);input_set_abs_params (dev,ABS_MT_POSITION_X ,0 , priv->x_max,0 ,0 );input_set_abs_params (dev,ABS_MT_POSITION_Y ,0 , priv->y_max,0 ,0 ); +input_set_abs_params (dev,ABS_TOOL_WIDTH ,0 ,15 ,0 ,0 );input_mt_init_slots (dev,5 ,INPUT_MT_POINTER );__set_bit (INPUT_PROP_BUTTONPAD , dev->propbit); }Signature · 1 line
1.9.1
Signature · 1 line
Dmitry