Skip to contentSkip to conversation

Input: edt-ft5x06 - mark as direct input device

PATCH New Dmitry Torokhov 1 participant 1 message Jun 1, 2015

Subsystems (2)
HID Input drivers
lore
Share & tools
lore

Dmitry Torokhov

author maintainer
#0 lore raw

PATCH 1/1 Input: edt-ft5x06 - mark as direct input device

edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it as such. This also allows us to drop some initialization code as input_init_mt_slots() will do that for us.

Signed-off-by Dmitry Torokhov <[email protected]>
---
 drivers/input/touchscreen/edt-ft5x06.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/input/touchscreen/edt-ft5x06.c +1 -6
index e6aef3e..29d179a 100644
@@ -1035,11 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
-	__set_bit(EV_KEY, input->evbit);
-	__set_bit(EV_ABS, input->evbit);
-	__set_bit(BTN_TOUCH, input->keybit);
-	input_set_abs_params(input, ABS_X, 0, tsdata->num_x * 64 - 1, 0, 0);
-	input_set_abs_params(input, ABS_Y, 0, tsdata->num_y * 64 - 1, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_X,
 			     0, tsdata->num_x * 64 - 1, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y,

@@ -1048,7 +1043,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	if (!pdata)
 		touchscreen_parse_of_params(input);
 
-	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
+	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
 		return error;
Signature · 5 lines
2.2.0.rc0.207.ga3a616c


-- 
Dmitry