cdc-acm: Add support of ATOL FPrint fiscal printers
Subsystems (2)
PATCH 1/1 cdc-acm: Add support of ATOL FPrint fiscal printers
ATOL FPrint fiscal printers require usb_clear_halt to be executed to work properly. Add quirk to fix the issue.
Signed-off-by Alexey Sokolov <[email protected]>
--- drivers/usb/class/cdc-acm.c | 9 +++++++++ drivers/usb/class/cdc-acm.h | 1 + 2 files changed, 10 insertions(+)
drivers/usb/class/cdc-acm.c +9 -0
@@ -1477,6 +1477,11 @@ skip_countries: goto alloc_fail8; } +if (quirks ==CLEAR_HALT_CONDITIONS ) { +usb_clear_halt (usb_dev,usb_rcvbulkpipe (usb_dev, epread->bEndpointAddress)); +usb_clear_halt (usb_dev,usb_sndbulkpipe (usb_dev, epwrite->bEndpointAddress)); + } +return 0 ; alloc_fail8:if (acm->country_codes) {
@@ -1756,6 +1761,10 @@ static const struct usb_device_id acm_ids[] = { .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ + .driver_info = CLEAR_HALT_CONDITIONS, + }, +/* Nokia S60 phones expose two ACM channels. The first is * a modem and is picked up by the standard AT-command * information below. The second is 'vendor-specific' but
drivers/usb/class/cdc-acm.h +1 -0
@@ -133,3 +133,4 @@ struct acm {#define NO_DATA_INTERFACE BIT(4)#define IGNORE_DEVICE BIT(5)#define QUIRK_CONTROL_LINE_STATE BIT(6) +#define CLEAR_HALT_CONDITIONS BIT(7)
Signature · 1 line
2.4.1
Quoted 14 lines · Alexey Sokolov
ATOL FPrint fiscal printers require
usb_clear_haltto be executed to work properly. Add quirk to fix the issue.Signed-off-by Alexey Sokolov <[email protected]>--- drivers/usb/class/cdc-acm.c | 9 +++++++++ drivers/usb/class/cdc-acm.h | 1 + 2 files changed, 10 insertions(+)drivers/usb/class/cdc-acm.c +0
-0
drivers/usb/class/cdc-acm.c skip_countries: · line 1484
Quoted 8 lines
drivers/usb/class/cdc-acm.c +5
-0@@ -1477,6 +1477,11 @@ skip_countries: goto alloc_fail8; } +if (quirks ==CLEAR_HALT_CONDITIONS ) { +usb_clear_halt (usb_dev,usb_rcvbulkpipe (usb_dev, epread->bEndpointAddress)); +usb_clear_halt (usb_dev,usb_sndbulkpipe (usb_dev, epwrite->bEndpointAddress)); + } +
Given quirks looks like a bitfield, it would be better if this is
if (quirks & CLEAR_HALT_CONDITIONS) {Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
Oliver Neukum
maintainerQuoted 3 lines · Alexey Sokolov
ATOL FPrint fiscal printers require
usb_clear_haltto be executed to work properly. Add quirk to fix the issue.
Hi,
thank you for this patch.
Quoted 11 lines
Signed-off-by Alexey Sokolov <[email protected]>--- drivers/usb/class/cdc-acm.c | 9 +++++++++ drivers/usb/class/cdc-acm.h | 1 + 2 files changed, 10 insertions(+)drivers/usb/class/cdc-acm.c +0
-0
drivers/usb/class/cdc-acm.c skip_countries: · line 1480
Quoted 4 lines
drivers/usb/class/cdc-acm.c +1
-0@@ -1477,6 +1477,11 @@ skip_countries: goto alloc_fail8; } +if (quirks ==CLEAR_HALT_CONDITIONS ) {
Please make that
quirks & CLEAR_HALT_CONDITIONS
Regards
Oliver