Minimal support for dm814x-evm and hp t410 thin client
Subsystems (10)
Tony Lindgren
maintainercover Minimal support for dm814x-evm and hp t410 thin client
Hi all,
Here are minimal patches to make dm814x boot with mainline kernel. No rush on these ones for v4.2, they need more testing for sure.
As I did not have a dm814x-evm, I got an hp t410 thin client as those can be found also second hand :)
There's still no PLL clock driver, but as dm814x boots with serial and NFSroot working, I figured it's time to post them so others might be able to use these patches for development too.
I posted some instructions on how to make the t410 boot:
And I pushed a temporary testing branch for the patches with an additional hack patch that's still needed until there's a clock driver to tmp-testing-dm814x-2015-06-03 at:
Cheers,
Tony
Tony Lindgren (12):
ARM: OMAP2+: Fix dm814x DT_MACHINE_START
ARM: OMAP2+: Fix scrm compatible for dm814x
ARM: OMAP2+: Add minimal clockdomains for dm814x
ARM: OMAP2+: Add custom prwdm_operations for 81xx to support dm814x
ARM: OMAP2+: Add support for initializing dm814x clocks
ARM: OMAP2+: Prepare dm81xx hwmod code for adding minimal dm814x
support
ARM: OMAP2: Add minimal dm814x hwmod support
ARM: dts: Add minimal dm814x support
ARM: dts: Add minimal clocks for dm814x
ARM: dts: Add minimal dts support for dm8148-evm
ARM: dts: Add minimal support for HP T410
ARM: OMAP2+: Add custom abort handler for t410
arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/dm8148-evm.dts | 28 ++ arch/arm/boot/dts/dm8148-t410.dts | 28 ++ arch/arm/boot/dts/dm814x-clocks.dtsi | 109 ++++++ arch/arm/boot/dts/dm814x.dtsi | 333 ++++++++++++++++ arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/clockdomain.h | 3 +- arch/arm/mach-omap2/clockdomains81xx_data.c | 23 +- arch/arm/mach-omap2/control.c | 1 + arch/arm/mach-omap2/io.c | 12 +- arch/arm/mach-omap2/omap_hwmod.c | 3 +- arch/arm/mach-omap2/omap_hwmod.h | 3 +- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 569 ++++++++++++++++++---------- arch/arm/mach-omap2/pdata-quirks.c | 29 ++ arch/arm/mach-omap2/powerdomains3xxx_data.c | 122 +++++- arch/arm/mach-omap2/prcm-common.h | 6 + drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/clk-814x.c | 36 ++ drivers/clk/ti/clk-816x.c | 2 +- include/linux/clk/ti.h | 3 +- 20 files changed, 1103 insertions(+), 213 deletions(-) create mode 100644 arch/arm/boot/dts/dm8148-evm.dts create mode 100644 arch/arm/boot/dts/dm8148-t410.dts create mode 100644 arch/arm/boot/dts/dm814x-clocks.dtsi create mode 100644 arch/arm/boot/dts/dm814x.dtsi create mode 100644 drivers/clk/ti/clk-814x.c
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 1/12 ARM: OMAP2+: Fix dm814x DT_MACHINE_START
Fix dm814x DT_MACHINE_START.
--- arch/arm/mach-omap2/board-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/board-generic.c +1 -1
@@ -169,7 +169,7 @@ static const char *const ti814x_boards_compat[] __initconst = {NULL , }; -DT_MACHINE_START (TI81XX_DT ,"Generic ti814x (Flattened Device Tree)" ) +DT_MACHINE_START (TI814X_DT ,"Generic ti814x (Flattened Device Tree)" ) .reserve = omap_reserve, .map_io = ti81xx_map_io, .init_early = ti814x_init_early,
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 2/12 ARM: OMAP2+: Fix scrm compatible for dm814x
In reply to Tony LindgrenFix scrm compatible for dm814x.
--- arch/arm/mach-omap2/control.c | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-omap2/control.c +1 -0
@@ -649,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data }, { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
Signature · 1 line
2.1.4
PATCH 2/12 ARM: OMAP2+: Fix scrm compatible for dm814x
Hello.
Quoted 1 line · Tony Lindgren
Fix scrm compatible for dm814x.
So, scrm...
Quoted 11 lines
Cc Matthijs van Duin <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- arch/arm/mach-omap2/control.c | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-omap2/control.c +0
-0
arch/arm/mach-omap2/control.c static const struct of_device_id omap_scrm_dt_match_table[] = { · line 652
Quoted 4 lines
arch/arm/mach-omap2/control.c +1
-0@@ -649,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data },
... or scm? :-)
arch/arm/mach-omap2/control.c static const struct of_device_id omap_scrm_dt_match_table[] = { · line 655
Quoted 3 lines
arch/arm/mach-omap2/control.c +0
-0{ .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
WBR, Sergei
Tony Lindgren
maintainerPATCH 2/12 ARM: OMAP2+: Fix scrm compatible for dm814x
Quoted 14 lines · Sergei Shtylyov
Hello.
Quoted 1 line · Tony Lindgren
Fix scrm compatible for dm814x.
So, scrm...Quoted 6 lines
Cc Matthijs van Duin <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- arch/arm/mach-omap2/control.c | 1 + 1 file changed, 1 insertion(+)
Quoted 15 lines
arch/arm/mach-omap2/control.c static const struct of_device_id omap_scrm_dt_match_table[] = { · line 652
Quoted 9 lines
arch/arm/mach-omap2/control.c +1
-0@@ -649,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data },... or scm? :-)Quoted 3 lines
arch/arm/mach-omap2/control.c +0
-0{ .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
Thanks, yeah we should standardize on scm.
Tony
Tony Lindgren
maintainerPATCH 2/12 ARM: OMAP2+: Fix scrm compatible for dm814x
Quoted 27 lines · Tony Lindgren
Quoted 26 lines · Sergei Shtylyov
Hello.
Quoted 1 line · Tony Lindgren
Fix scrm compatible for dm814x.
So, scrm...Quoted 11 lines
Cc Matthijs van Duin <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- arch/arm/mach-omap2/control.c | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-omap2/control.c +0
-0arch/arm/mach-omap2/control.c static const struct of_device_id omap_scrm_dt_match_table[] = { · line 652
Quoted 4 lines
arch/arm/mach-omap2/control.c +1
-0@@ -649,6 +649,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data },... or scm? :-)
Quoted 5 lines
Quoted 3 lines
arch/arm/mach-omap2/control.c static const struct of_device_id omap_scrm_dt_match_table[] = { · line 655
Quoted 3 lines
arch/arm/mach-omap2/control.c +0
-0{ .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },Thanks, yeah we should standardize on scm.
Below is this one updated to use scm instead of scrm in the description.
Regards,
Tony
8< -------------------
From: Tony Lindgren <[email protected]>
Date: Thu, 16 Jul 2015 01:55:57 -0700
Subject: [PATCH] ARM: OMAP2+: Fix scm compatible for dm814x
Fix scm compatible for dm814x.
arch/arm/mach-omap2/control.c +1 -0
@@ -652,6 +652,7 @@ static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, + { .compatible = "ti,dm814-scm", .data = &ctrl_data }, { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
Tony Lindgren
maintainerPATCH 3/12 ARM: OMAP2+: Add minimal clockdomains for dm814x
In reply to Tony LindgrenFor now, let's just add the ones shared with dm816x. The dm814x specific ones can be added as they are tested.
--- arch/arm/mach-omap2/clockdomain.h | 3 ++- arch/arm/mach-omap2/clockdomains81xx_data.c | 23 ++++++++++++++++++++--- arch/arm/mach-omap2/io.c | 4 ++-- 3 files changed, 24 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/clockdomain.h +2 -1
@@ -216,7 +216,8 @@ extern void __init omap242x_clockdomains_init(void);extern void __init omap243x_clockdomains_init (void );extern void __init omap3xxx_clockdomains_init (void );extern void __init am33xx_clockdomains_init (void ); -extern void __init ti81xx_clockdomains_init (void ); +extern void __init ti814x_clockdomains_init (void ); +extern void __init ti816x_clockdomains_init (void );extern void __init omap44xx_clockdomains_init (void );extern void __init omap54xx_clockdomains_init (void );extern void __init dra7xx_clockdomains_init (void );
arch/arm/mach-omap2/clockdomains81xx_data.c +20 -3
@@ -165,7 +165,24 @@ static struct clockdomain default_l3_slow_816x_clkdm = { .flags = CLKDM_CAN_SWSUP, }; -static struct clockdomain *clockdomains_ti81xx[]__initdata = { +static struct clockdomain *clockdomains_ti814x[]__initdata = { + &alwon_l3_slow_81xx_clkdm, + &alwon_l3_med_81xx_clkdm, + &alwon_l3_fast_81xx_clkdm, + &alwon_ethernet_81xx_clkdm, + &mmu_81xx_clkdm, + &mmu_cfg_81xx_clkdm, +NULL , +}; + +void __init ti814x_clockdomains_init (void ) +{ +clkdm_register_platform_funcs (&am33xx_clkdm_operations); +clkdm_register_clkdms (clockdomains_ti814x); +clkdm_complete_init (); +} + +static struct clockdomain *clockdomains_ti816x[]__initdata = { &alwon_mpu_816x_clkdm, &alwon_l3_slow_81xx_clkdm, &alwon_l3_med_81xx_clkdm,
@@ -185,10 +202,10 @@ static struct clockdomain *clockdomains_ti81xx[] __initdata = { NULL, }; -void __init ti81xx_clockdomains_init (void ) +void __init ti816x_clockdomains_init (void ) {clkdm_register_platform_funcs (&am33xx_clkdm_operations); -clkdm_register_clkdms (clockdomains_ti81xx); +clkdm_register_clkdms (clockdomains_ti816x);clkdm_complete_init (); }#endif
arch/arm/mach-omap2/io.c +2 -2
@@ -554,7 +554,7 @@ void __init ti814x_init_early(void)omap2_prcm_base_init ();omap3xxx_voltagedomains_init ();omap3xxx_powerdomains_init (); -ti81xx_clockdomains_init (); +ti814x_clockdomains_init ();ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ())
@@ -571,7 +571,7 @@ void __init ti816x_init_early(void)omap2_prcm_base_init ();omap3xxx_voltagedomains_init ();omap3xxx_powerdomains_init (); -ti81xx_clockdomains_init (); +ti816x_clockdomains_init ();ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ())
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 4/12 ARM: OMAP2+: Add custom prwdm_operations for 81xx to support dm814x
In reply to Tony LindgrenLooking at the TI kernel tree I noticed that dm81xx need custom ti81xx_pwrdm_operations. Let's also change dm816x over to use them as the registers are different for dm81xx compared to others.
--- arch/arm/mach-omap2/powerdomains3xxx_data.c | 122 +++++++++++++++++++++++++++- arch/arm/mach-omap2/prcm-common.h | 6 ++ 2 files changed, 125 insertions(+), 3 deletions(-)
arch/arm/mach-omap2/powerdomains3xxx_data.c +119 -3
@@ -349,6 +349,41 @@ static struct powerdomain device_81xx_pwrdm = { .voltdm = { .name = "core" }, }; +static struct powerdomain gem_814x_pwrdm = { + .name ="gem_pwrdm" , + .prcm_offs =TI814X_PRM_DSP_MOD , + .pwrsts =PWRSTS_OFF_ON , + .voltdm = { .name ="dsp" }, +}; + +static struct powerdomain ivahd_814x_pwrdm = { + .name ="ivahd_pwrdm" , + .prcm_offs =TI814X_PRM_HDVICP_MOD , + .pwrsts =PWRSTS_OFF_ON , + .voltdm = { .name ="iva" }, +}; + +static struct powerdomain hdvpss_814x_pwrdm = { + .name ="hdvpss_pwrdm" , + .prcm_offs =TI814X_PRM_HDVPSS_MOD , + .pwrsts =PWRSTS_OFF_ON , + .voltdm = { .name ="dsp" }, +}; + +static struct powerdomain sgx_814x_pwrdm = { + .name ="sgx_pwrdm" , + .prcm_offs =TI814X_PRM_GFX_MOD , + .pwrsts =PWRSTS_OFF_ON , + .voltdm = { .name ="core" }, +}; + +static struct powerdomain isp_814x_pwrdm = { + .name ="isp_pwrdm" , + .prcm_offs =TI814X_PRM_ISP_MOD , + .pwrsts =PWRSTS_OFF_ON , + .voltdm = { .name ="core" }, +}; +static struct powerdomain active_816x_pwrdm = { .name ="active_pwrdm" , .prcm_offs =TI816X_PRM_ACTIVE_MOD ,
@@ -448,7 +483,18 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {NULL }; -static struct powerdomain *powerdomains_ti81xx[]__initdata = { +static struct powerdomain *powerdomains_ti814x[]__initdata = { + &alwon_81xx_pwrdm, + &device_81xx_pwrdm, + &gem_814x_pwrdm, + &ivahd_814x_pwrdm, + &hdvpss_814x_pwrdm, + &sgx_814x_pwrdm, + &isp_814x_pwrdm, +NULL +}; + +static struct powerdomain *powerdomains_ti816x[]__initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, &active_816x_pwrdm,
@@ -460,6 +506,73 @@ static struct powerdomain *powerdomains_ti81xx[] __initdata = { NULL }; +/* TI81XX specific ops */ +#define TI81XX_PM_PWSTCTRL 0x0000 +#define TI81XX_RM_RSTCTRL 0x0010 +#define TI81XX_PM_PWSTST 0x0004 + +static int ti81xx_pwrdm_set_next_pwrst (struct powerdomain *pwrdm,u8 pwrst) +{ +omap2_prm_rmw_mod_reg_bits (OMAP_POWERSTATE_MASK , + (pwrst <<OMAP_POWERSTATE_SHIFT ), + pwrdm->prcm_offs,TI81XX_PM_PWSTCTRL ); +return 0 ; +} + +static int ti81xx_pwrdm_read_next_pwrst (struct powerdomain *pwrdm) +{ +return omap2_prm_read_mod_bits_shift (pwrdm->prcm_offs, +TI81XX_PM_PWSTCTRL , +OMAP_POWERSTATE_MASK ); +} + +static int ti81xx_pwrdm_read_pwrst (struct powerdomain *pwrdm) +{ +return omap2_prm_read_mod_bits_shift (pwrdm->prcm_offs, + (pwrdm->prcm_offs ==TI814X_PRM_GFX_MOD ) ?TI81XX_RM_RSTCTRL : +TI81XX_PM_PWSTST , +OMAP_POWERSTATEST_MASK ); +} + +static int ti81xx_pwrdm_read_logic_pwrst (struct powerdomain *pwrdm) +{ +return omap2_prm_read_mod_bits_shift (pwrdm->prcm_offs, + (pwrdm->prcm_offs ==TI814X_PRM_GFX_MOD ) ?TI81XX_RM_RSTCTRL : +TI81XX_PM_PWSTST , +OMAP3430_LOGICSTATEST_MASK ); +} + +static int ti81xx_pwrdm_wait_transition (struct powerdomain *pwrdm) +{ +u32 c =0 ; + +while ((omap2_prm_read_mod_reg (pwrdm->prcm_offs, + (pwrdm->prcm_offs ==TI814X_PRM_GFX_MOD ) ?TI81XX_RM_RSTCTRL : +TI81XX_PM_PWSTST ) & +OMAP_INTRANSITION_MASK ) && + (c++ <PWRDM_TRANSITION_BAILOUT )) +udelay (1 ); + +if (c >PWRDM_TRANSITION_BAILOUT ) { +pr_err ("powerdomain: %s timeout waiting for transition\n" , + pwrdm->name); +return -EAGAIN ; + } + +pr_debug ("powerdomain: completed transition in %d loops\n" , c); + +return 0 ; +} + +/* For dm814x we need to fix up fix GFX pwstst and rstctrl reg offsets */ +static struct pwrdm_ops ti81xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = ti81xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = ti81xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = ti81xx_pwrdm_read_pwrst, + .pwrdm_read_logic_pwrst = ti81xx_pwrdm_read_logic_pwrst, + .pwrdm_wait_transition = ti81xx_pwrdm_wait_transition, +}; +void __init omap3xxx_powerdomains_init (void ) {unsigned int rev;
@@ -467,15 +580,18 @@ void __init omap3xxx_powerdomains_init(void)if (!cpu_is_omap34xx () && !cpu_is_ti81xx ())return ; -pwrdm_register_platform_funcs (&omap3_pwrdm_operations); +pwrdm_register_platform_funcs (&ti81xx_pwrdm_operations); rev =omap_rev ();if (rev ==AM35XX_REV_ES1_0 || rev ==AM35XX_REV_ES1_1 ) {pwrdm_register_pwrdms (powerdomains_am35x); + }else if (rev ==TI8148_REV_ES1_0 || rev ==TI8148_REV_ES2_0 || + rev ==TI8148_REV_ES2_1 ) { +pwrdm_register_pwrdms (powerdomains_ti814x); }else if (rev ==TI8168_REV_ES1_0 || rev ==TI8168_REV_ES1_1 || rev ==TI8168_REV_ES2_0 || rev ==TI8168_REV_ES2_1 ) { -pwrdm_register_pwrdms (powerdomains_ti81xx); +pwrdm_register_pwrdms (powerdomains_ti816x); }else {pwrdm_register_pwrdms (powerdomains_omap3430_common);
arch/arm/mach-omap2/prcm-common.h +6 -0
@@ -51,6 +51,12 @@/* * TI81XX PRM module offsets */ +#define TI814X_PRM_DSP_MOD 0x0a00 +#define TI814X_PRM_HDVICP_MOD 0x0c00 +#define TI814X_PRM_ISP_MOD 0x0d00 +#define TI814X_PRM_HDVPSS_MOD 0x0e00 +#define TI814X_PRM_GFX_MOD 0x0f00 +#define TI81XX_PRM_DEVICE_MOD 0x0000#define TI816X_PRM_ACTIVE_MOD 0x0a00#define TI81XX_PRM_DEFAULT_MOD 0x0b00
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
In reply to Tony LindgrenLet's add a minimal clocks for dm814x to get it booted. This is mostly a placeholder and relies on the PLLs being on from the bootloader.
Note that the divider clocks work the same way as on dm816x and am335x.
--- arch/arm/mach-omap2/io.c | 4 ++-- drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/clk-814x.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/clk/ti/clk-816x.c | 2 +- include/linux/clk/ti.h | 3 ++- 5 files changed, 42 insertions(+), 5 deletions(-) create mode 100644 drivers/clk/ti/clk-814x.c
arch/arm/mach-omap2/io.c +2 -2
@@ -558,7 +558,7 @@ void __init ti814x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; }void __init ti816x_init_early (void )
@@ -575,7 +575,7 @@ void __init ti816x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; }#endif
drivers/clk/ti/Makefile +1 -1
@@ -2,7 +2,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o -obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o +obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \ clk-3xxx.o
drivers/clk/ti/clk-814x.c new file +36 -0
@@ -0,0 +1,36 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ), +DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name =NULL }, +}; + +static const char *enable_init_clks[] = { +}; + +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (enable_init_clks, +ARRAY_SIZE (enable_init_clks)); + +return 0 ; +}
drivers/clk/ti/clk-816x.c +1 -1
@@ -42,7 +42,7 @@ static const char *enable_init_clks[] = { "ddr_pll_clk3", }; -int __init ti81xx_dt_clk_init (void ) +int __init dm816x_dt_clk_init (void ) {ti_dt_clocks_register (dm816x_clks);omap2_clk_disable_autoidle_all ();
include/linux/clk/ti.h +2 -1
@@ -329,7 +329,8 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);int omap3430_dt_clk_init (void );int omap3630_dt_clk_init (void );int am35xx_dt_clk_init (void ); -int ti81xx_dt_clk_init (void ); +int dm814x_dt_clk_init (void ); +int dm816x_dt_clk_init (void );int omap4xxx_dt_clk_init (void );int omap5xxx_dt_clk_init (void );int dra7xx_dt_clk_init (void );
Signature · 1 line
2.1.4
PATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
Quoted 6 lines · Tony Lindgren
drivers/clk/ti/clk-814x.c new file +0
-0
drivers/clk/ti/clk-814x.c line 8
Quoted 8 lines
drivers/clk/ti/clk-814x.c new file +8
-0@@ -0,0 +1,36 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/list.h>
Is list.h used?
Quoted 8 lines
drivers/clk/ti/clk-814x.c new file +8
-0+#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ),
drivers/clk/ti/clk-814x.c line 26
Quoted 10 lines
drivers/clk/ti/clk-814x.c new file +10
-0+DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { +};
delete?
drivers/clk/ti/clk-814x.c line 33
Quoted 7 lines
drivers/clk/ti/clk-814x.c new file +7
-0+ +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (enable_init_clks, +ARRAY_SIZE (enable_init_clks));
And pass NULL and 0 here?
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Tony Lindgren
maintainerPATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
Quoted 39 lines · Stephen Boyd
Quoted 6 lines · Tony Lindgren
drivers/clk/ti/clk-814x.c new file +0
-0drivers/clk/ti/clk-814x.c line 8
Quoted 8 lines
drivers/clk/ti/clk-814x.c new file +8
-0@@ -0,0 +1,36 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/list.h> Is
list.hused?Quoted 8 lines
drivers/clk/ti/clk-814x.c new file +8
-0+#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ),drivers/clk/ti/clk-814x.c line 26
Quoted 10 lines
drivers/clk/ti/clk-814x.c new file +10
-0+DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { +};delete?
Quoted 9 lines
drivers/clk/ti/clk-814x.c line 33
Quoted 7 lines
drivers/clk/ti/clk-814x.c new file +7
-0+ +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (enable_init_clks, +ARRAY_SIZE (enable_init_clks));And pass NULL and 0 here?
Sure will remove, we can add those back once the PLL parts are working and if/when some boot time clocks are needed.
Thanks.
Tony
Tony Lindgren
maintainerPATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
Quoted 5 lines · Tony Lindgren
Quoted 4 lines · Stephen Boyd
Quoted 1 line · Tony Lindgren
+#include <
linux/list.h>Is
list.hused?
...
Quoted 15 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+static const char *enable_init_clks[] = { +};delete?
Quoted 9 lines
Review
Quoted 7 lines
(quoted diff) +7
-0+ +int __init dm814x_dt_clk_init(void) +{ + ti_dt_clocks_register(dm814_clks); + omap2_clk_disable_autoidle_all(); + omap2_clk_enable_init_clocks(enable_init_clks, + ARRAY_SIZE(enable_init_clks));And pass NULL and 0 here?
Quoted 2 lines
Sure will remove, we can add those back once the PLL parts are working and if/when some boot time clocks are needed.
Here's this patch updated with the above removed.
Regards,
Tony
8< -------------
From: Tony Lindgren <[email protected]>
Date: Thu, 16 Jul 2015 01:55:57 -0700
Subject: [PATCH] ARM: OMAP2+: Add support for initializing dm814x clocks
Let's add a minimal clocks for dm814x to get it booted. This is mostly a placeholder and relies on the PLLs being on from the bootloader.
Note that the divider clocks work the same way as on dm816x and am335x.
arch/arm/mach-omap2/io.c +2 -2
@@ -558,7 +558,7 @@ void __init ti814x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; }void __init ti816x_init_early (void )
@@ -575,7 +575,7 @@ void __init ti816x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; }#endif
drivers/clk/ti/Makefile +1 -1
@@ -2,7 +2,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o -obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o +obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \ clk-3xxx.o
drivers/clk/ti/clk-814x.c new file +31 -0
@@ -0,0 +1,31 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ), +DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name =NULL }, +}; + +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (NULL ,0 ); + +return 0 ; +}
drivers/clk/ti/clk-816x.c +1 -1
@@ -42,7 +42,7 @@ static const char *enable_init_clks[] = { "ddr_pll_clk3", }; -int __init ti81xx_dt_clk_init (void ) +int __init dm816x_dt_clk_init (void ) {ti_dt_clocks_register (dm816x_clks);omap2_clk_disable_autoidle_all ();
include/linux/clk/ti.h +2 -1
@@ -329,7 +329,8 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);int omap3430_dt_clk_init (void );int omap3630_dt_clk_init (void );int am35xx_dt_clk_init (void ); -int ti81xx_dt_clk_init (void ); +int dm814x_dt_clk_init (void ); +int dm816x_dt_clk_init (void );int omap4xxx_dt_clk_init (void );int omap5xxx_dt_clk_init (void );int dra7xx_dt_clk_init (void );
PATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
Quoted 3 lines · Tony Lindgren
Here's this patch updated with the above removed.
Ok. I fixed up Mike's email in case he wants to look at it. Looks fine to me though.
Quoted 13 lines
8< -------------
From: Tony Lindgren <[email protected]>
Date: Thu, 16 Jul 2015 01:55:57 -0700
Subject: [PATCH] ARM: OMAP2+: Add support for initializing dm814x clocksLet's add a minimal clocks for dm814x to get it booted. This is mostly a placeholder and relies on the PLLs being on from the bootloader.
Note that the divider clocks work the same way as on dm816x and am335x.
Quoted 6 lines
Cc Matthijs van Duin <[email protected]>Cc Mike Turquette <[email protected]>Cc Paul Walmsley <[email protected]>Cc Stephen Boyd <[email protected]>Cc Tero Kristo <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Quoted 89 lines
arch/arm/mach-omap2/io.c +2
-2@@ -558,7 +558,7 @@ void __init ti814x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; }void __init ti816x_init_early (void )@@ -575,7 +575,7 @@ void __init ti816x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; }#endif drivers/clk/ti/Makefile +1
-1@@ -2,7 +2,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o -obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o +obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \ clk-3xxx.odrivers/clk/ti/clk-814x.c new file +31
-0@@ -0,0 +1,31 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ), +DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name =NULL }, +}; + +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (NULL ,0 ); + +return 0 ; +}drivers/clk/ti/clk-816x.c +1
-1@@ -42,7 +42,7 @@ static const char *enable_init_clks[] = { "ddr_pll_clk3", }; -int __init ti81xx_dt_clk_init (void ) +int __init dm816x_dt_clk_init (void ) {ti_dt_clocks_register (dm816x_clks);omap2_clk_disable_autoidle_all ();include/linux/clk/ti.h +2
-1@@ -329,7 +329,8 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);int omap3430_dt_clk_init (void );int omap3630_dt_clk_init (void );int am35xx_dt_clk_init (void ); -int ti81xx_dt_clk_init (void ); +int dm814x_dt_clk_init (void ); +int dm816x_dt_clk_init (void );int omap4xxx_dt_clk_init (void );int omap5xxx_dt_clk_init (void );int dra7xx_dt_clk_init (void );
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Tony Lindgren
maintainerPATCH 5/12 ARM: OMAP2+: Add support for initializing dm814x clocks
Quoted 7 lines · Stephen Boyd
Quoted 3 lines · Tony Lindgren
Here's this patch updated with the above removed.
Ok. I fixed up Mike's email in case he wants to look at it. Looks fine to me though.
OK thanks for updating Mike's email.
Regards,
Tony
Quoted 113 lines
Quoted 12 lines
8< -------------
From: Tony Lindgren <[email protected]>
Date: Thu, 16 Jul 2015 01:55:57 -0700
Subject: [PATCH] ARM: OMAP2+: Add support for initializing dm814x clocksLet's add a minimal clocks for dm814x to get it booted. This is mostly a placeholder and relies on the PLLs being on from the bootloader.
Note that the divider clocks work the same way as on dm816x and am335x.
Quoted 6 lines
Cc Matthijs van Duin <[email protected]>Cc Mike Turquette <[email protected]>Cc Paul Walmsley <[email protected]>Cc Stephen Boyd <[email protected]>Cc Tero Kristo <[email protected]>Signed-off-by Tony Lindgren <[email protected]>Acked-by Stephen Boyd <[email protected]>Quoted 86 lines
arch/arm/mach-omap2/io.c +2
-2@@ -558,7 +558,7 @@ void __init ti814x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm814x_dt_clk_init; }void __init ti816x_init_early (void )@@ -575,7 +575,7 @@ void __init ti816x_init_early(void)ti81xx_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) - omap_clk_soc_init = ti81xx_dt_clk_init; + omap_clk_soc_init = dm816x_dt_clk_init; }#endif drivers/clk/ti/Makefile +1
-1@@ -2,7 +2,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o -obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o +obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \ clk-3xxx.odrivers/clk/ti/clk-814x.c new file +31
-0@@ -0,0 +1,31 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +*/ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +static struct ti_dt_clk dm814_clks[] = { +DT_CLK (NULL ,"devosc_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"mpu_ck" ,"mpu_ck" ), +DT_CLK (NULL ,"sysclk4_ck" ,"sysclk4_ck" ), +DT_CLK (NULL ,"sysclk6_ck" ,"sysclk6_ck" ), +DT_CLK (NULL ,"sysclk10_ck" ,"sysclk10_ck" ), +DT_CLK (NULL ,"sysclk18_ck" ,"sysclk18_ck" ), +DT_CLK (NULL ,"timer_sys_ck" ,"devosc_ck" ), +DT_CLK (NULL ,"cpsw_125mhz_gclk" ,"cpsw_125mhz_gclk" ), +DT_CLK (NULL ,"cpsw_cpts_rft_clk" ,"cpsw_cpts_rft_clk" ), + { .node_name =NULL }, +}; + +int __init dm814x_dt_clk_init (void ) +{ +ti_dt_clocks_register (dm814_clks); +omap2_clk_disable_autoidle_all (); +omap2_clk_enable_init_clocks (NULL ,0 ); + +return 0 ; +}drivers/clk/ti/clk-816x.c +1
-1@@ -42,7 +42,7 @@ static const char *enable_init_clks[] = { "ddr_pll_clk3", }; -int __init ti81xx_dt_clk_init (void ) +int __init dm816x_dt_clk_init (void ) {ti_dt_clocks_register (dm816x_clks);omap2_clk_disable_autoidle_all ();include/linux/clk/ti.h +2
-1@@ -329,7 +329,8 @@ int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);int omap3430_dt_clk_init (void );int omap3630_dt_clk_init (void );int am35xx_dt_clk_init (void ); -int ti81xx_dt_clk_init (void ); +int dm814x_dt_clk_init (void ); +int dm816x_dt_clk_init (void );int omap4xxx_dt_clk_init (void );int omap5xxx_dt_clk_init (void );int dra7xx_dt_clk_init (void );Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Tony Lindgren
maintainerPATCH 6/12 ARM: OMAP2+: Prepare dm81xx hwmod code for adding minimal dm814x support
In reply to Tony LindgrenLet's change the defines so we can share the hwmod code better between dm816x and dm814x, and let's add the dm814x specific defines. And let's rename the shared ones to start with dm81xx. No functional changes.
--- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 406 +++++++++++++++-------------- 1 file changed, 213 insertions(+), 193 deletions(-)
arch/arm/mach-omap2/omap_hwmod_81xx_data.c +213 -193
@@ -32,21 +32,59 @@*/ /* -* The alwon .clkctrl_offs field is offset from the CM_ALWON, that's -* TRM 18.7.17 CM_ALWON device register values minus 0x1400. +* Common alwon .clkctrl_offs from dm814x TRM "Table 2-278. CM_ALWON REGISTERS" +* also dm816x TRM 18.7.17 CM_ALWON device register values minus 0x1400. */ +#define DM81XX_CM_ALWON_MCASP0_CLKCTRL 0x140 +#define DM81XX_CM_ALWON_MCASP1_CLKCTRL 0x144 +#define DM81XX_CM_ALWON_MCASP2_CLKCTRL 0x148 +#define DM81XX_CM_ALWON_MCBSP_CLKCTRL 0x14c +#define DM81XX_CM_ALWON_UART_0_CLKCTRL 0x150 +#define DM81XX_CM_ALWON_UART_1_CLKCTRL 0x154 +#define DM81XX_CM_ALWON_UART_2_CLKCTRL 0x158 +#define DM81XX_CM_ALWON_GPIO_0_CLKCTRL 0x15c +#define DM81XX_CM_ALWON_GPIO_1_CLKCTRL 0x160 +#define DM81XX_CM_ALWON_I2C_0_CLKCTRL 0x164 +#define DM81XX_CM_ALWON_I2C_1_CLKCTRL 0x168 +#define DM81XX_CM_ALWON_WDTIMER_CLKCTRL 0x18c +#define DM81XX_CM_ALWON_SPI_CLKCTRL 0x190 +#define DM81XX_CM_ALWON_MAILBOX_CLKCTRL 0x194 +#define DM81XX_CM_ALWON_SPINBOX_CLKCTRL 0x198 +#define DM81XX_CM_ALWON_MMUDATA_CLKCTRL 0x19c +#define DM81XX_CM_ALWON_MMUCFG_CLKCTRL 0x1a8 +#define DM81XX_CM_ALWON_CONTROL_CLKCTRL 0x1c4 +#define DM81XX_CM_ALWON_GPMC_CLKCTRL 0x1d0 +#define DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL 0x1d4 +#define DM81XX_CM_ALWON_L3_CLKCTRL 0x1e4 +#define DM81XX_CM_ALWON_L4HS_CLKCTRL 0x1e8 +#define DM81XX_CM_ALWON_L4LS_CLKCTRL 0x1ec +#define DM81XX_CM_ALWON_RTC_CLKCTRL 0x1f0 +#define DM81XX_CM_ALWON_TPCC_CLKCTRL 0x1f4 +#define DM81XX_CM_ALWON_TPTC0_CLKCTRL 0x1f8 +#define DM81XX_CM_ALWON_TPTC1_CLKCTRL 0x1fc +#define DM81XX_CM_ALWON_TPTC2_CLKCTRL 0x200 +#define DM81XX_CM_ALWON_TPTC3_CLKCTRL 0x204 + +/* Registers specific to dm814x */ +#define DM814X_CM_ALWON_MCASP_3_4_5_CLKCTRL 0x16c +#define DM814X_CM_ALWON_ATL_CLKCTRL 0x170 +#define DM814X_CM_ALWON_MLB_CLKCTRL 0x174 +#define DM814X_CM_ALWON_PATA_CLKCTRL 0x178 +#define DM814X_CM_ALWON_UART_3_CLKCTRL 0x180 +#define DM814X_CM_ALWON_UART_4_CLKCTRL 0x184 +#define DM814X_CM_ALWON_UART_5_CLKCTRL 0x188 +#define DM814X_CM_ALWON_OCM_0_CLKCTRL 0x1b4 +#define DM814X_CM_ALWON_VCP_CLKCTRL 0x1b8 +#define DM814X_CM_ALWON_MPU_CLKCTRL 0x1dc +#define DM814X_CM_ALWON_DEBUGSS_CLKCTRL 0x1e0 +#define DM814X_CM_ALWON_DCAN_0_1_CLKCTRL 0x218 +#define DM814X_CM_ALWON_MMCHS_0_CLKCTRL 0x21c +#define DM814X_CM_ALWON_MMCHS_1_CLKCTRL 0x220 +#define DM814X_CM_ALWON_MMCHS_2_CLKCTRL 0x224 +#define DM814X_CM_ALWON_CUST_EFUSE_CLKCTRL 0x228 + +/* Registers specific to dm816x */ #define DM816X_DM_ALWON_BASE 0x1400 -#define DM816X_CM_ALWON_MCASP0_CLKCTRL (0x1540 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCASP1_CLKCTRL (0x1544 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCASP2_CLKCTRL (0x1548 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MCBSP_CLKCTRL (0x154c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_0_CLKCTRL (0x1550 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_1_CLKCTRL (0x1554 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_UART_2_CLKCTRL (0x1558 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPIO_0_CLKCTRL (0x155c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPIO_1_CLKCTRL (0x1560 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_I2C_0_CLKCTRL (0x1564 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_I2C_1_CLKCTRL (0x1568 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_TIMER_1_CLKCTRL (0x1570 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_TIMER_2_CLKCTRL (0x1574 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_TIMER_3_CLKCTRL (0x1578 - DM816X_DM_ALWON_BASE)
@@ -54,29 +92,11 @@#define DM816X_CM_ALWON_TIMER_5_CLKCTRL (0x1580 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_TIMER_6_CLKCTRL (0x1584 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_TIMER_7_CLKCTRL (0x1588 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_WDTIMER_CLKCTRL (0x158c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_SPI_CLKCTRL (0x1590 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MAILBOX_CLKCTRL (0x1594 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_SPINBOX_CLKCTRL (0x1598 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MMUDATA_CLKCTRL (0x159c - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_MMUCFG_CLKCTRL (0x15a8 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_SDIO_CLKCTRL (0x15b0 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_OCMC_0_CLKCTRL (0x15b4 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_OCMC_1_CLKCTRL (0x15b8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_CONTRL_CLKCTRL (0x15c4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_GPMC_CLKCTRL (0x15d0 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_ETHERNET_0_CLKCTRL (0x15d4 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_ETHERNET_1_CLKCTRL (0x15d8 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_MPU_CLKCTRL (0x15dc - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L3_CLKCTRL (0x15e4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L4HS_CLKCTRL (0x15e8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_L4LS_CLKCTRL (0x15ec - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_RTC_CLKCTRL (0x15f0 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPCC_CLKCTRL (0x15f4 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC0_CLKCTRL (0x15f8 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC1_CLKCTRL (0x15fc - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC2_CLKCTRL (0x1600 - DM816X_DM_ALWON_BASE) -#define DM816X_CM_ALWON_TPTC3_CLKCTRL (0x1604 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_SR_0_CLKCTRL (0x1608 - DM816X_DM_ALWON_BASE)#define DM816X_CM_ALWON_SR_1_CLKCTRL (0x160c - DM816X_DM_ALWON_BASE)
@@ -88,28 +108,28 @@#define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET)/* L3 Interconnect entries clocked at 125, 250 and 500MHz */ -static struct omap_hwmod dm816x_alwon_l3_slow_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = { .name ="alwon_l3_slow" , .clkdm_name ="alwon_l3s_clkdm" , .class = &l3_hwmod_class, .flags =HWMOD_NO_IDLEST , }; -static struct omap_hwmod dm816x_default_l3_slow_hwmod = { +static struct omap_hwmod dm81xx_default_l3_slow_hwmod = { .name ="default_l3_slow" , .clkdm_name ="default_l3_slow_clkdm" , .class = &l3_hwmod_class, .flags =HWMOD_NO_IDLEST , }; -static struct omap_hwmod dm816x_alwon_l3_med_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = { .name ="l3_med" , .clkdm_name ="alwon_l3_med_clkdm" , .class = &l3_hwmod_class, .flags =HWMOD_NO_IDLEST , }; -static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = { +static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = { .name ="l3_fast" , .clkdm_name ="alwon_l3_fast_clkdm" , .class = &l3_hwmod_class,
@@ -120,7 +140,7 @@ static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = {* L4 standard peripherals, see TRM table 1-12 for devices using this. * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock. */ -static struct omap_hwmod dm816x_l4_ls_hwmod = { +static struct omap_hwmod dm81xx_l4_ls_hwmod = { .name ="l4_ls" , .clkdm_name ="alwon_l3s_clkdm" , .class = &l4_hwmod_class,
@@ -131,23 +151,23 @@ static struct omap_hwmod dm816x_l4_ls_hwmod = {* table 1-13. On dm816x, only EMAC, MDIO and SATA use this. See also TRM * table 1-73 for devices using 250MHz SYSCLK5 clock. */ -static struct omap_hwmod dm816x_l4_hs_hwmod = { +static struct omap_hwmod dm81xx_l4_hs_hwmod = { .name ="l4_hs" , .clkdm_name ="alwon_l3_med_clkdm" , .class = &l4_hwmod_class, };/* L3 slow -> L4 ls peripheral interface running at 125MHz */ -static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_ls = { - .master = &dm816x_alwon_l3_slow_hwmod, - .slave = &dm816x_l4_ls_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_ls = { + .master = &dm81xx_alwon_l3_slow_hwmod, + .slave = &dm81xx_l4_ls_hwmod, .user =OCP_USER_MPU , };/* L3 med -> L4 fast peripheral interface running at 250MHz */ -static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_hs = { - .master = &dm816x_alwon_l3_med_hwmod, - .slave = &dm816x_l4_hs_hwmod, +static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__l4_hs = { + .master = &dm81xx_alwon_l3_med_hwmod, + .slave = &dm81xx_l4_hs_hwmod, .user =OCP_USER_MPU , };
@@ -168,14 +188,14 @@ static struct omap_hwmod dm816x_mpu_hwmod = {static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_slow = { .master = &dm816x_mpu_hwmod, - .slave = &dm816x_alwon_l3_slow_hwmod, + .slave = &dm81xx_alwon_l3_slow_hwmod, .user =OCP_USER_MPU , };/* L3 med peripheral interface running at 250MHz */ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { .master = &dm816x_mpu_hwmod, - .slave = &dm816x_alwon_l3_med_hwmod, + .slave = &dm81xx_alwon_l3_med_hwmod, .user =OCP_USER_MPU , };
@@ -197,13 +217,13 @@ static struct omap_hwmod_class uart_class = { .sysc = &uart_sysc, }; -static struct omap_hwmod dm816x_uart1_hwmod = { +static struct omap_hwmod dm81xx_uart1_hwmod = { .name ="uart1" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk10_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_UART_0_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_UART_0_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, },
@@ -211,20 +231,20 @@ static struct omap_hwmod dm816x_uart1_hwmod = { .flags = DEBUG_TI81XXUART1_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart1_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart1_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod dm816x_uart2_hwmod = { +static struct omap_hwmod dm81xx_uart2_hwmod = { .name ="uart2" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk10_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_UART_1_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_UART_1_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, },
@@ -232,20 +252,20 @@ static struct omap_hwmod dm816x_uart2_hwmod = { .flags = DEBUG_TI81XXUART2_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart2 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart2_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart2_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod dm816x_uart3_hwmod = { +static struct omap_hwmod dm81xx_uart3_hwmod = { .name ="uart3" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk10_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_UART_2_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_UART_2_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, },
@@ -253,9 +273,9 @@ static struct omap_hwmod dm816x_uart3_hwmod = { .flags = DEBUG_TI81XXUART3_FLAGS, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__uart3 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_uart3_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__uart3 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_uart3_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , };
@@ -276,23 +296,23 @@ static struct omap_hwmod_class wd_timer_class = { .reset = &omap2_wd_timer_reset, }; -static struct omap_hwmod dm816x_wd_timer_hwmod = { +static struct omap_hwmod dm81xx_wd_timer_hwmod = { .name ="wd_timer" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk18_ck" , .flags =HWMOD_NO_IDLEST , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_WDTIMER_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_WDTIMER_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, .class = &wd_timer_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__wd_timer1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_wd_timer_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__wd_timer1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_wd_timer_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , };
@@ -320,27 +340,27 @@ static struct omap_hwmod dm81xx_i2c1_hwmod = { .main_clk = "sysclk10_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_I2C_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_I2C_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, .class = &i2c_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c1 = { - .master = &dm816x_l4_ls_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c1 = { + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_i2c1_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod dm816x_i2c2_hwmod = { +static struct omap_hwmod dm81xx_i2c2_hwmod = { .name ="i2c2" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk10_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_I2C_1_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_I2C_1_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, },
@@ -358,9 +378,9 @@ static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c2 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_i2c2_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_i2c2_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , };
@@ -378,7 +398,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = { };static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_elm_hwmod, .user =OCP_USER_MPU , };
@@ -417,7 +437,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPIO_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, },
@@ -427,7 +447,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = { };static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio1_hwmod, .user =OCP_USER_MPU , };
@@ -443,7 +463,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPIO_1_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_1_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, },
@@ -453,7 +473,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = { };static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_gpio2_hwmod, .user =OCP_USER_MPU , };
@@ -480,14 +500,14 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = { .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_GPMC_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, };struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { - .master = &dm816x_alwon_l3_slow_hwmod, + .master = &dm81xx_alwon_l3_slow_hwmod, .slave = &dm81xx_gpmc_hwmod, .user =OCP_USER_MPU , };
@@ -520,7 +540,7 @@ static struct omap_hwmod dm81xx_usbss_hwmod = { };static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = { - .master = &dm816x_default_l3_slow_hwmod, + .master = &dm81xx_default_l3_slow_hwmod, .slave = &dm81xx_usbss_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -560,7 +580,7 @@ static struct omap_hwmod dm816x_timer1_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer1_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -581,7 +601,7 @@ static struct omap_hwmod dm816x_timer2_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer2_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -602,7 +622,7 @@ static struct omap_hwmod dm816x_timer3_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer3 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer3_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -623,7 +643,7 @@ static struct omap_hwmod dm816x_timer4_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer4 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer4_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -644,7 +664,7 @@ static struct omap_hwmod dm816x_timer5_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer5 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer5_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -665,7 +685,7 @@ static struct omap_hwmod dm816x_timer6_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer6 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer6_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -686,7 +706,7 @@ static struct omap_hwmod dm816x_timer7_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_timer7_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -715,21 +735,21 @@ static struct omap_hwmod dm816x_emac0_hwmod = { .class = &dm816x_emac_hwmod_class, }; -static struct omap_hwmod_ocp_if dm816x_l4_hs__emac0 = { - .master = &dm816x_l4_hs_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = { + .master = &dm81xx_l4_hs_hwmod, .slave = &dm816x_emac0_hwmod, .clk ="sysclk5_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod_class dm816x_mdio_hwmod_class = { +static struct omap_hwmod_class dm81xx_mdio_hwmod_class = { .name ="davinci_mdio" , .sysc = &dm816x_emac_sysc, }; -struct omap_hwmod dm816x_emac0_mdio_hwmod = { +struct omap_hwmod dm81xx_emac0_mdio_hwmod = { .name ="davinci_mdio" , - .class = &dm816x_mdio_hwmod_class, + .class = &dm81xx_mdio_hwmod_class, .clkdm_name ="alwon_ethernet_clkdm" , .main_clk ="sysclk24_ck" , .flags =HWMOD_NO_IDLEST ,
@@ -739,15 +759,15 @@ struct omap_hwmod dm816x_emac0_mdio_hwmod = {*/ .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_ALWON_ETHERNET_0_CLKCTRL, + .clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, }; -struct omap_hwmod_ocp_if dm816x_emac0__mdio = { - .master = &dm816x_l4_hs_hwmod, - .slave = &dm816x_emac0_mdio_hwmod, +struct omap_hwmod_ocp_if dm81xx_emac0__mdio = { + .master = &dm81xx_l4_hs_hwmod, + .slave = &dm81xx_emac0_mdio_hwmod, .user =OCP_USER_MPU , };
@@ -766,7 +786,7 @@ static struct omap_hwmod dm816x_emac1_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { - .master = &dm816x_l4_hs_hwmod, + .master = &dm81xx_l4_hs_hwmod, .slave = &dm816x_emac1_hwmod, .clk ="sysclk5_ck" , .user =OCP_USER_MPU ,
@@ -813,7 +833,7 @@ static struct omap_hwmod dm816x_mmc1_hwmod = { };static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = { - .master = &dm816x_l4_ls_hwmod, + .master = &dm81xx_l4_ls_hwmod, .slave = &dm816x_mmc1_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU ,
@@ -841,13 +861,13 @@ static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = { .num_chipselect = 4, }; -static struct omap_hwmod dm816x_mcspi1_hwmod = { +static struct omap_hwmod dm81xx_mcspi1_hwmod = { .name ="mcspi1" , .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk10_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_SPI_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_SPI_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, },
@@ -855,14 +875,14 @@ static struct omap_hwmod dm816x_mcspi1_hwmod = { .dev_attr = &dm816x_mcspi1_dev_attr, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__mcspi1 = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_mcspi1_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mcspi1_hwmod, .clk ="sysclk6_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = { +static struct omap_hwmod_class_sysconfig dm81xx_mailbox_sysc = { .rev_offs =0x000 , .sysc_offs =0x010 , .syss_offs =0x014 ,
@@ -872,55 +892,55 @@ static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class dm816x_mailbox_hwmod_class = { +static struct omap_hwmod_class dm81xx_mailbox_hwmod_class = { .name ="mailbox" , - .sysc = &dm816x_mailbox_sysc, + .sysc = &dm81xx_mailbox_sysc, }; -static struct omap_hwmod dm816x_mailbox_hwmod = { +static struct omap_hwmod dm81xx_mailbox_hwmod = { .name ="mailbox" , .clkdm_name ="alwon_l3s_clkdm" , - .class = &dm816x_mailbox_hwmod_class, + .class = &dm81xx_mailbox_hwmod_class, .main_clk ="sysclk6_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_MAILBOX_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_MAILBOX_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -static struct omap_hwmod_ocp_if dm816x_l4_ls__mailbox = { - .master = &dm816x_l4_ls_hwmod, - .slave = &dm816x_mailbox_hwmod, +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mailbox_hwmod, .user =OCP_USER_MPU , }; -static struct omap_hwmod_class dm816x_tpcc_hwmod_class = { +static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { .name ="tpcc" , }; -struct omap_hwmod dm816x_tpcc_hwmod = { +struct omap_hwmod dm81xx_tpcc_hwmod = { .name ="tpcc" , - .class = &dm816x_tpcc_hwmod_class, + .class = &dm81xx_tpcc_hwmod_class, .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk4_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_TPCC_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_TPCC_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tpcc = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tpcc_hwmod, +struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tpcc_hwmod, .clk ="sysclk4_ck" , .user =OCP_USER_MPU , }; -static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc0_addr_space[] = { { .pa_start =0x49800000 , .pa_end =0x49800000 +SZ_8K -1 ,
@@ -929,40 +949,40 @@ static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc0_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = { .name ="tptc0" , }; -struct omap_hwmod dm816x_tptc0_hwmod = { +struct omap_hwmod dm81xx_tptc0_hwmod = { .name ="tptc0" , - .class = &dm816x_tptc0_hwmod_class, + .class = &dm81xx_tptc0_hwmod_class, .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk4_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_TPTC0_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_TPTC0_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc0 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc0_hwmod, +struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc0_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc0_addr_space, + .addr = dm81xx_tptc0_addr_space, .user =OCP_USER_MPU , }; -struct omap_hwmod_ocp_if dm816x_tptc0__alwon_l3_fast = { - .master = &dm816x_tptc0_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = { + .master = &dm81xx_tptc0_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc0_addr_space, + .addr = dm81xx_tptc0_addr_space, .user =OCP_USER_MPU , }; -static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc1_addr_space[] = { { .pa_start =0x49900000 , .pa_end =0x49900000 +SZ_8K -1 ,
@@ -971,40 +991,40 @@ static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc1_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = { .name ="tptc1" , }; -struct omap_hwmod dm816x_tptc1_hwmod = { +struct omap_hwmod dm81xx_tptc1_hwmod = { .name ="tptc1" , - .class = &dm816x_tptc1_hwmod_class, + .class = &dm81xx_tptc1_hwmod_class, .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk4_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_TPTC1_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_TPTC1_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc1 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc1_hwmod, +struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc1_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc1_addr_space, + .addr = dm81xx_tptc1_addr_space, .user =OCP_USER_MPU , }; -struct omap_hwmod_ocp_if dm816x_tptc1__alwon_l3_fast = { - .master = &dm816x_tptc1_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = { + .master = &dm81xx_tptc1_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc1_addr_space, + .addr = dm81xx_tptc1_addr_space, .user =OCP_USER_MPU , }; -static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc2_addr_space[] = { { .pa_start =0x49a00000 , .pa_end =0x49a00000 +SZ_8K -1 ,
@@ -1013,40 +1033,40 @@ static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc2_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = { .name ="tptc2" , }; -struct omap_hwmod dm816x_tptc2_hwmod = { +struct omap_hwmod dm81xx_tptc2_hwmod = { .name ="tptc2" , - .class = &dm816x_tptc2_hwmod_class, + .class = &dm81xx_tptc2_hwmod_class, .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk4_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_TPTC2_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_TPTC2_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc2 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc2_hwmod, +struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc2_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc2_addr_space, + .addr = dm81xx_tptc2_addr_space, .user =OCP_USER_MPU , }; -struct omap_hwmod_ocp_if dm816x_tptc2__alwon_l3_fast = { - .master = &dm816x_tptc2_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = { + .master = &dm81xx_tptc2_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc2_addr_space, + .addr = dm81xx_tptc2_addr_space, .user =OCP_USER_MPU , }; -static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = { +static struct omap_hwmod_addr_space dm81xx_tptc3_addr_space[] = { { .pa_start =0x49b00000 , .pa_end =0x49b00000 +SZ_8K -1 ,
@@ -1055,50 +1075,50 @@ static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = { { }, }; -static struct omap_hwmod_class dm816x_tptc3_hwmod_class = { +static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = { .name ="tptc3" , }; -struct omap_hwmod dm816x_tptc3_hwmod = { +struct omap_hwmod dm81xx_tptc3_hwmod = { .name ="tptc3" , - .class = &dm816x_tptc3_hwmod_class, + .class = &dm81xx_tptc3_hwmod_class, .clkdm_name ="alwon_l3s_clkdm" , .main_clk ="sysclk4_ck" , .prcm = { .omap4 = { - .clkctrl_offs =DM816X_CM_ALWON_TPTC3_CLKCTRL , + .clkctrl_offs =DM81XX_CM_ALWON_TPTC3_CLKCTRL , .modulemode =MODULEMODE_SWCTRL , }, }, }; -struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc3 = { - .master = &dm816x_alwon_l3_fast_hwmod, - .slave = &dm816x_tptc3_hwmod, +struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = { + .master = &dm81xx_alwon_l3_fast_hwmod, + .slave = &dm81xx_tptc3_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc3_addr_space, + .addr = dm81xx_tptc3_addr_space, .user =OCP_USER_MPU , }; -struct omap_hwmod_ocp_if dm816x_tptc3__alwon_l3_fast = { - .master = &dm816x_tptc3_hwmod, - .slave = &dm816x_alwon_l3_fast_hwmod, +struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { + .master = &dm81xx_tptc3_hwmod, + .slave = &dm81xx_alwon_l3_fast_hwmod, .clk ="sysclk4_ck" , - .addr = dm816x_tptc3_addr_space, + .addr = dm81xx_tptc3_addr_space, .user =OCP_USER_MPU , };static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[]__initdata = { &dm816x_mpu__alwon_l3_slow, &dm816x_mpu__alwon_l3_med, - &dm816x_alwon_l3_slow__l4_ls, - &dm816x_alwon_l3_slow__l4_hs, - &dm816x_l4_ls__uart1, - &dm816x_l4_ls__uart2, - &dm816x_l4_ls__uart3, - &dm816x_l4_ls__wd_timer1, - &dm816x_l4_ls__i2c1, - &dm816x_l4_ls__i2c2, + &dm81xx_alwon_l3_slow__l4_ls, + &dm81xx_alwon_l3_slow__l4_hs, + &dm81xx_l4_ls__uart1, + &dm81xx_l4_ls__uart2, + &dm81xx_l4_ls__uart3, + &dm81xx_l4_ls__wd_timer1, + &dm81xx_l4_ls__i2c1, + &dm81xx_l4_ls__i2c2, &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm,
@@ -1110,20 +1130,20 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm816x_l4_ls__timer5, &dm816x_l4_ls__timer6, &dm816x_l4_ls__timer7, - &dm816x_l4_ls__mcspi1, - &dm816x_l4_ls__mailbox, - &dm816x_l4_hs__emac0, - &dm816x_emac0__mdio, + &dm81xx_l4_ls__mcspi1, + &dm81xx_l4_ls__mailbox, + &dm81xx_l4_hs__emac0, + &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, - &dm816x_alwon_l3_fast__tpcc, - &dm816x_alwon_l3_fast__tptc0, - &dm816x_alwon_l3_fast__tptc1, - &dm816x_alwon_l3_fast__tptc2, - &dm816x_alwon_l3_fast__tptc3, - &dm816x_tptc0__alwon_l3_fast, - &dm816x_tptc1__alwon_l3_fast, - &dm816x_tptc2__alwon_l3_fast, - &dm816x_tptc3__alwon_l3_fast, + &dm81xx_alwon_l3_fast__tpcc, + &dm81xx_alwon_l3_fast__tptc0, + &dm81xx_alwon_l3_fast__tptc1, + &dm81xx_alwon_l3_fast__tptc2, + &dm81xx_alwon_l3_fast__tptc3, + &dm81xx_tptc0__alwon_l3_fast, + &dm81xx_tptc1__alwon_l3_fast, + &dm81xx_tptc2__alwon_l3_fast, + &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, &dm81xx_default_l3_slow__usbss, NULL,
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 7/12 ARM: OMAP2: Add minimal dm814x hwmod support
In reply to Tony LindgrenLet's add minimal set of dm814x hwmods to have a bootable system.
--- arch/arm/mach-omap2/io.c | 4 +- arch/arm/mach-omap2/omap_hwmod.c | 3 +- arch/arm/mach-omap2/omap_hwmod.h | 3 +- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 163 ++++++++++++++++++++++++++++- 4 files changed, 168 insertions(+), 5 deletions(-)
arch/arm/mach-omap2/io.c +2 -2
@@ -555,7 +555,7 @@ void __init ti814x_init_early(void)omap3xxx_voltagedomains_init ();omap3xxx_powerdomains_init ();ti814x_clockdomains_init (); -ti81xx_hwmod_init (); +dm814x_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) omap_clk_soc_init = dm814x_dt_clk_init;
@@ -572,7 +572,7 @@ void __init ti816x_init_early(void)omap3xxx_voltagedomains_init ();omap3xxx_powerdomains_init ();ti816x_clockdomains_init (); -ti81xx_hwmod_init (); +dm816x_hwmod_init ();omap_hwmod_init_postsetup ();if (of_have_populated_dt ()) omap_clk_soc_init = dm816x_dt_clk_init;
arch/arm/mach-omap2/omap_hwmod.c +2 -1
@@ -3876,7 +3876,8 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; - }else if (cpu_is_ti816x () ||soc_is_am33xx () ||soc_is_am43xx ()) { + }else if (cpu_is_ti814x () ||cpu_is_ti816x () ||soc_is_am33xx () || +soc_is_am43xx ()) { soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready;
arch/arm/mach-omap2/omap_hwmod.h +2 -1
@@ -749,7 +749,8 @@ extern int omap3xxx_hwmod_init(void);extern int omap44xx_hwmod_init (void );extern int omap54xx_hwmod_init (void );extern int am33xx_hwmod_init (void ); -extern int ti81xx_hwmod_init (void ); +extern int dm814x_hwmod_init (void ); +extern int dm816x_hwmod_init (void );extern int dra7xx_hwmod_init (void );int am43xx_hwmod_init (void );
arch/arm/mach-omap2/omap_hwmod_81xx_data.c +162 -1
199 lines not on this page · raw message
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 8/12 ARM: dts: Add minimal dm814x support
In reply to Tony LindgrenAdd minimal dm814x support.
--- arch/arm/boot/dts/dm814x.dtsi | 331 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 331 insertions(+) create mode 100644 arch/arm/boot/dts/dm814x.dtsi
arch/arm/boot/dts/dm814x.dtsi new file +331 -0
@@ -0,0 +1,331 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" + +/ { + compatible = "ti,dm814"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu at 0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + /* + * See TRM "Table 1-317. L4LS Instance Summary", just deduct + * 0x1000 from the 1-317 addresses to get the device address + */ + l4ls: l4ls at 48000000 { + compatible = "ti,dm814-l4ls", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x2000000>; + + i2c1: i2c at 28000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + reg = <0x28000 0x1000>; + interrupts = <70>; + }; + + elm: elm at 80000 { + compatible = "ti,814-elm"; + ti,hwmods = "elm"; + reg = <0x80000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio at 32000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + reg = <0x32000 0x2000>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 4c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + reg = <0x4c000 0x2000>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c2: i2c at 2a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x1000>; + interrupts = <71>; + }; + + mcspi1: spi at 30000 { + compatible = "ti,omap4-mcspi"; + reg = <0x30000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 &edma 17 + &edma 18 &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + timer1: timer at 2e000 { + compatible = "ti,dm814-timer"; + reg = <0x2e000 0x2000>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + uart1: uart at 20000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x20000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 &edma 27>; + dma-names = "tx", "rx"; + }; + + uart2: uart at 22000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x22000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 &edma 29>; + dma-names = "tx", "rx"; + }; + + uart3: uart at 24000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x24000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 &edma 31>; + dma-names = "tx", "rx"; + }; + + timer2: timer at 40000 { + compatible = "ti,dm814-timer"; + reg = <0x40000 0x2000>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer at 42000 { + compatible = "ti,dm814-timer"; + reg = <0x42000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + control: control at 160000 { + compatible = "ti,dm814-scm", "simple-bus"; + reg = <0x160000 0x16d000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x160000 0x16d000>; + + scm_conf: scm_conf at 0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scm_clockdomains: clockdomains { + }; + }; + + pincntl: pinmux at 800 { + compatible = "pinctrl-single"; + reg = <0x800 0xc38>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x300ff>; + }; + }; + + prcm: prcm at 180000 { + compatible = "ti,dm814-prcm", "simple-bus"; + reg = <0x180000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + pllss: pllss at 1c5000 { + compatible = "ti,dm814-pllss", "simple-bus"; + reg = <0x1c5000 0x2000>; + + pllss_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pllss_clockdomains: clockdomains { + }; + }; + + wdt1: wdt at 1c7000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x1c7000 0x1000>; + interrupts = <91>; + }; + }; + + intc: interrupt-controller at 48200000 { + compatible = "ti,dm814-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + edma: edma at 49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + /* See TRM "Table 1-318. L4HS Instance Summary" */ + l4hs: l4hs at 4a000000 { + compatible = "ti,dm814-l4hs", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1b4040>; + }; + + /* REVISIT: Move to live under l4hs once driver is fixed */ + mac: ethernet at 4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x4a100000 0x800 + 0x4a100900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges; + syscon = <&scm_conf>; + + davinci_mdio: mdio at 4a100800 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a100800 0x100>; + }; + + cpsw_emac0: slave at 4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave at 4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel at 0x48160650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x48160650 0x4>; + reg-names = "gmii-sel"; + }; + }; + }; +};
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 9/12 ARM: dts: Add minimal clocks for dm814x
In reply to Tony LindgrenUse fixed clocks until we have a clock driver for the PLL. The mux and divider composite clocks work the same way as on dm816x and am335x.
--- arch/arm/boot/dts/dm814x-clocks.dtsi | 109 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/dm814x.dtsi | 2 + 2 files changed, 111 insertions(+) create mode 100644 arch/arm/boot/dts/dm814x-clocks.dtsi
arch/arm/boot/dts/dm814x-clocks.dtsi new file +109 -0
@@ -0,0 +1,109 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scm_clocks { + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + devosc_ck: devosc_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + auxosc_ck: auxosc_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000000>; + }; + + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <222000000>; + }; + + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + sysclk10_ck: sysclk10_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; + + sysclk18_ck: sysclk18_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <250000000>; + }; + +}; + +&pllss_clocks { + + aud_clkin0_ck: aud_clkin0_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + aud_clkin1_ck: aud_clkin1_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + aud_clkin2_ck: aud_clkin2_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + timer1_mux_ck: timer1_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <3>; + reg = <0x2e0>; + }; + + timer2_mux_ck: timer2_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <6>; + reg = <0x2e0>; + }; +};
arch/arm/boot/dts/dm814x.dtsi +2 -0
@@ -329,3 +329,5 @@ }; }; }; + +#include "dm814x-clocks.dtsi"
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 10/12 ARM: dts: Add minimal dts support for dm8148-evm
In reply to Tony LindgrenAdd minimal dts support for dm8148-evm.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/dm8148-evm.dts | 28 ++++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm/boot/dts/dm8148-evm.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -404,6 +404,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ + dm8148-evm.dtb \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \
arch/arm/boot/dts/dm8148-evm.dts new file +28 -0
@@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm814x.dtsi" + +/ { + model = "DM8148 EVM"; + compatible = "ti,dm8148-evm", "ti,dm8148"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +};
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 11/12 ARM: dts: Add minimal support for HP T410
In reply to Tony LindgrenAdd minimal support for HP T410.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/dm8148-t410.dts | 28 ++++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm/boot/dts/dm8148-t410.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -405,6 +405,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ dm8148-evm.dtb \ + dm8148-t410.dtb \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \
arch/arm/boot/dts/dm8148-t410.dts new file +28 -0
@@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm814x.dtsi" + +/ { + model = "DM8148 EVM"; + compatible = "hp,t410", "ti,dm8148"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +};
Signature · 1 line
2.1.4
Tony Lindgren
maintainerPATCH 12/12 ARM: OMAP2+: Add custom abort handler for t410
In reply to Tony LindgrenSimilar to commit fdf4850cb5b2 ("ARM: BCM5301X: workaround suppress fault"), let's add custom handling for the aborts on t410 that prevent booting:
Unhandled fault: imprecise external abort (0xc06) at 0xee091fb0 pgd = ee4bc000
[ee091fb0] *pgd=ae00041e(bad)
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
--- arch/arm/mach-omap2/pdata-quirks.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
arch/arm/mach-omap2/pdata-quirks.c +29 -0
@@ -18,6 +18,9 @@#include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> +#include <asm/siginfo.h> +#include <asm/signal.h> +#include "common.h" #include "common-board-devices.h" #include "dss-common.h"
@@ -249,6 +252,29 @@ static void __init omap3_tao3530_legacy_init(void) }#endif /* CONFIG_ARCH_OMAP3 */ +#ifdef CONFIG_SOC_TI81XX +static int fault_fixed_up; + +static int t410_abort_handler (unsigned long addr,unsigned int fsr, +struct pt_regs *regs) +{ +if ((fsr ==0x406 || fsr ==0xc06 ) && !fault_fixed_up) { +pr_warn ("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n" , + addr, fsr); + fault_fixed_up =1 ; +return 0 ; + } + +return 1 ; +} + +static void __init t410_abort_init (void ) +{ +hook_fault_code (16 +6 , t410_abort_handler,SIGBUS ,BUS_OBJERR , +"imprecise external abort" ); +} +#endif +#if defined(CONFIG_ARCH_OMAP4 ) || defined(CONFIG_SOC_OMAP5 )static struct iommu_platform_data omap4_iommu_pdata = { .reset_name = "mmu_cache",
@@ -360,6 +386,9 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, #endif +#ifdef CONFIG_SOC_TI81XX + { "hp,t410", t410_abort_init, }, +#endif #ifdef CONFIG_SOC_OMAP5 { "ti,omap5-uevm", omap5_uevm_legacy_init, }, #endif
Signature · 1 line
2.1.4