MMC: host: Fixed multiple checkpatch.pl issues in 4 files.
Subsystems (5)
PATCH 1/1 MMC: host: Fixed multiple checkpatch.pl issues in 4 files.
Changes include indenting and spacing.
Also replaced a few asm/ includes with linux/. Sometimes the new include has already been included so just removed the /asm.
Signed-off-by Daniel Lockyer <[email protected]>
--- drivers/mmc/host/android-goldfish.c | 14 ++++++-------- drivers/mmc/host/atmel-mci.c | 14 +++++--------- drivers/mmc/host/au1xmmc.c | 16 +++++++--------- drivers/mmc/host/mmci.c | 6 ++---- 4 files changed, 20 insertions(+), 30 deletions(-)
drivers/mmc/host/android-goldfish.c +6 -8
@@ -43,13 +43,11 @@#include <linux/timer.h> #include <linux/clk.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/irq.h> -#include <asm/scatterlist.h> - +#include <linux/scatterlist.h> #include <asm/types.h> -#include <asm/io.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #define DRIVER_NAME "goldfish_mmc"
@@ -309,10 +307,10 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)if (status &MMC_STAT_STATE_CHANGE ) state_changed =1 ; -if (status &MMC_STAT_CMD_TIMEOUT ) { +if (status &MMC_STAT_CMD_TIMEOUT ) { end_command =0 ; cmd_timeout =1 ; - } + } }if (cmd_timeout) {
@@ -353,7 +351,7 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)if (!end_command && !end_transfer && !transfer_error && !state_changed && !cmd_timeout) { status =GOLDFISH_MMC_READ (host,MMC_INT_STATUS ); -dev_info (mmc_dev (host->mmc),"spurious irq 0x%04x\n" , status); +dev_info (mmc_dev (host->mmc),"spurious irq 0x%04x\n" , status);if (status !=0 ) {GOLDFISH_MMC_WRITE (host,MMC_INT_STATUS , status);GOLDFISH_MMC_WRITE (host,MMC_INT_ENABLE ,0 );
drivers/mmc/host/atmel-mci.c +5 -9
@@ -42,7 +42,6 @@#include <linux/pinctrl/consumer.h> #include <asm/cacheflush.h> -#include <asm/io.h> #include <asm/unaligned.h> #include "atmel-mci-regs.h"
@@ -1390,9 +1389,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) }if (!any_slot_active) {atmci_writel (host,ATMCI_CR ,ATMCI_CR_MCIDIS ); -if (host->mode_reg) { +if (host->mode_reg)atmci_readl (host,ATMCI_MR ); - } host->mode_reg =0 ; }spin_unlock_bh (&host->lock);
@@ -1830,13 +1828,12 @@ static void atmci_tasklet_func(unsigned long priv) host->stop_transfer (host); host->data =NULL ;if (data) { -if (status &ATMCI_DTOE ) { +if (status &ATMCI_DTOE ) data->error = -ETIMEDOUT ; - }else if (status &ATMCI_DCRCE ) { +else if (status &ATMCI_DCRCE ) data->error = -EILSEQ ; - }else { +else data->error = -EIO ; - } } }
@@ -1995,9 +1992,8 @@ static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)for (i =0 ; i <ATMCI_MAX_NR_SLOTS ; i++) {struct atmel_mci_slot *slot = host->slot[i]; -if (slot && (status & slot->sdio_irq)) { +if (slot && (status & slot->sdio_irq))mmc_signal_sdio_irq (slot->mmc); - } } }
drivers/mmc/host/au1xmmc.c +7 -9
@@ -43,8 +43,8 @@#include <linux/leds.h> #include <linux/mmc/host.h> #include <linux/slab.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h>
@@ -352,7 +352,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) data->error =0 ;dma_unmap_sg (mmc_dev (host->mmc), data->sg, data->sg_len, host->dma.dir); -/* Process any errors */ +/* Process any errors */ crc = (status & (SD_STATUS_WC |SD_STATUS_RC ));if (host->flags &HOST_F_XMIT ) crc |= ((status &0x07 ) ==0x02 ) ?0 :1 ;
@@ -491,8 +491,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)DBG ("RX Overrun [%d + %d]\n" , host->pdev->id, host->pio.len, count);break ; - } -else if (status &SD_STATUS_RU ) { + }else if (status &SD_STATUS_RU ) {DBG ("RX Underrun [%d + %d]\n" , host->pdev->id, host->pio.len, count);break ;
@@ -567,7 +566,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) } } -/* Figure out errors */ +/* Figure out errors */ if (status & (SD_STATUS_SC |SD_STATUS_WC |SD_STATUS_RC )) cmd->error = -EILSEQ ;
@@ -589,7 +588,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)if (host->flags &HOST_F_RECV ) {u32 mask =SD_STATUS_DB |SD_STATUS_NE ; -while ((status & mask) != mask) +while ((status & mask) != mask) status =__raw_readl (HOST_STATUS (host)); }
@@ -685,7 +684,7 @@ dataerr: }/* This actually starts a command or data transaction */ -static void au1xmmc_request (struct mmc_host * mmc,struct mmc_request * mrq) +static void au1xmmc_request (struct mmc_host *mmc,struct mmc_request *mrq) {struct au1xmmc_host *host =mmc_priv (mmc);int ret =0 ;
@@ -758,9 +757,8 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)if (ios->power_mode ==MMC_POWER_OFF )au1xmmc_set_power (host,0 ); -else if (ios->power_mode ==MMC_POWER_ON ) { +else if (ios->power_mode ==MMC_POWER_ON )au1xmmc_set_power (host,1 ); - }if (ios->clock && ios->clock != host->clock) {au1xmmc_set_clock (host, ios->clock);
drivers/mmc/host/mmci.c +2 -4
@@ -39,7 +39,6 @@#include <linux/pinctrl/consumer.h> #include <asm/div64.h> -#include <asm/io.h> #include <asm/sizes.h> #include "mmci.h"
@@ -968,11 +967,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,/* The error clause is handled above, success! */ data->bytes_xfered = data->blksz * data->blocks; -if (!data->stop || host->mrq->sbc) { +if (!data->stop || host->mrq->sbc)mmci_request_end (host, data->mrq); - }else { +else mmci_start_command (host, data->stop,0 ); - } } }
Signature · 1 line
2.4.2