Skip to contentSkip to conversation

Add Toby-Churchill SL50 board support

PATCH Superseded Enric Balletbo i Serra 2 participants 3 messages Jun 4, 2015 – Jun 12, 2015 Arm (32-bit)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add Toby-Churchill SL50 board support

This patch series adds support for SL50 board based on TI AM335x SoC.

Changes since v2:
- Rebased with current mainline.
- Keep the TI copyright header on some files.
- Add SPDX tags instead the full verbage.
- Set default fdtfile to am335x-sl50.dtb (instead uses am33xx-sl50.dtb)

Changes since v1:
- Rebased with current mainline.
- Fix implicit declaration of function 'is_valid_ether_addr' (and the resulting link failure).

Best regards,

Enric Balletbo i Serra (1):
board: Add Toby-Churchill SL50 board support.

 arch/arm/Kconfig              |   6 +
 board/tcl/sl50/Kconfig        |  34 ++++
 board/tcl/sl50/MAINTAINERS    |   6 +
 board/tcl/sl50/Makefile       |  13 ++
 board/tcl/sl50/board.c        | 386 ++++++++++++++++++++++++++++++++++++++++++
 board/tcl/sl50/board.h        |  22 +++
 board/tcl/sl50/mux.c          | 154 +++++++++++++++++
 configs/am335x_sl50_defconfig |   7 +
 include/configs/am335x_sl50.h | 138 +++++++++++++++
 9 files changed, 766 insertions(+)
 create mode 100644 board/tcl/sl50/Kconfig
 create mode 100644 board/tcl/sl50/MAINTAINERS
 create mode 100644 board/tcl/sl50/Makefile
 create mode 100644 board/tcl/sl50/board.c
 create mode 100644 board/tcl/sl50/board.h
 create mode 100644 board/tcl/sl50/mux.c
 create mode 100644 configs/am335x_sl50_defconfig
 create mode 100644 include/configs/am335x_sl50.h
Signature · 1 line
2.1.0
#1 lore raw

PATCH v3 1/1 board: Add Toby-Churchill SL50 board support.

Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions.

---
 arch/arm/Kconfig              |   6 +
 board/tcl/sl50/Kconfig        |  34 ++++
 board/tcl/sl50/MAINTAINERS    |   6 +
 board/tcl/sl50/Makefile       |  13 ++
 board/tcl/sl50/board.c        | 386 ++++++++++++++++++++++++++++++++++++++++++
 board/tcl/sl50/board.h        |  22 +++
 board/tcl/sl50/mux.c          | 154 +++++++++++++++++
 configs/am335x_sl50_defconfig |   7 +
 include/configs/am335x_sl50.h | 138 +++++++++++++++
 9 files changed, 766 insertions(+)
 create mode 100644 board/tcl/sl50/Kconfig
 create mode 100644 board/tcl/sl50/MAINTAINERS
 create mode 100644 board/tcl/sl50/Makefile
 create mode 100644 board/tcl/sl50/board.c
 create mode 100644 board/tcl/sl50/board.h
 create mode 100644 board/tcl/sl50/mux.c
 create mode 100644 configs/am335x_sl50_defconfig
 create mode 100644 include/configs/am335x_sl50.h
arch/arm/Kconfig +6 -0
index 2985e6e..095c009 100644
@@ -377,6 +377,11 @@ config TARGET_AM335X_EVM
 	select DM_SERIAL
 	select DM_GPIO
 
+config TARGET_AM335X_SL50
+	bool "Support am335x_sl50"
+	select CPU_V7
+	select SUPPORT_SPL
+
 config TARGET_AM43XX_EVM
 	bool "Support am43xx_evm"
 	select CPU_V7
@@ -949,6 +954,7 @@ source "board/st/stv0991/Kconfig"
 source "board/sunxi/Kconfig"
 source "board/syteco/zmx25/Kconfig"
 source "board/tbs/tbs2910/Kconfig"
+source "board/tcl/sl50/Kconfig"
 source "board/ti/am335x/Kconfig"
 source "board/ti/am43xx/Kconfig"
 source "board/birdland/bav335x/Kconfig"
board/tcl/sl50/Kconfig new file +34 -0
new file mode 100644
index 0000000..2b93aa2
@@ -0,0 +1,34 @@
+if TARGET_AM335X_SL50
+
+config SYS_BOARD
+	default "sl50"
+
+config SYS_VENDOR
+	default "tcl"
+
+config SYS_SOC
+	default "am33xx"
+
+config SYS_CONFIG_NAME
+	default "am335x_sl50"
+
+config CONS_INDEX
+	int "UART used for console"
+	range 1 6
+	default 1
+	help
+	  The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
+	  in documentation, etc) available to it.  Depending on your specific
+	  board you may want something other than UART0 as for example the IDK
+	  uses UART3 so enter 4 here.
+
+config DM
+	default y
+
+config DM_GPIO
+	default y if DM
+
+config DM_SERIAL
+	default y if DM
+
+endif
board/tcl/sl50/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..29f1e3d
@@ -0,0 +1,6 @@
+SL50 BOARD
+M:	Enric Balletbo i Serra <[email protected]>
+S:	Maintained
+F:	board/tcl/sl50/
+F:	include/configs/am335x_sl50.h
+F:	configs/am335x_sl50_defconfig
board/tcl/sl50/Makefile new file +13 -0
new file mode 100644
index 0000000..d4a548c
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
+obj-y	:= mux.o
+endif
+
+obj-y	+= board.o
board/tcl/sl50/board.c new file +386 -0

386 lines not on this page · raw message

board/tcl/sl50/board.h new file +22 -0
new file mode 100644
index 0000000..ae2ef6b
@@ -0,0 +1,22 @@
+/*
+ * board.h
+ *
+ * TCL SL50 boards information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
board/tcl/sl50/mux.c new file +154 -0

154 lines not on this page · raw message

configs/am335x_sl50_defconfig new file +7 -0
new file mode 100644
index 0000000..1e5c452
@@ -0,0 +1,7 @@
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
+CONFIG_CONS_INDEX=1
+CONFIG_ARM=y
+CONFIG_TARGET_AM335X_SL50=y
include/configs/am335x_sl50.h new file +138 -0

138 lines not on this page · raw message

Signature · 1 line
2.1.0
#2 lore raw

PATCH v3 1/1 board: Add Toby-Churchill SL50 board support.

Quoted 6 lines · Enric Balletbo i Serra

Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions.

[snip]

board/tcl/sl50/Kconfig line 32

Quoted 8 lines
board/tcl/sl50/Kconfig new file +8 -0
+config DM
+	default y
+
+config DM_GPIO
+	default y if DM
+
+config DM_SERIAL
+	default y if DM

You don't need 'config DM' now (that causes warnings) nor ' if DM' on the other two options now.

And once I fix that I see:
+(am335x_sl50) drivers/serial/serial-uclass.c:27:2: error: #error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work" +(am335x_sl50) drivers/serial/serial-uclass.c: In function ?serial_find_console_or_panic?:
+(am335x_sl50) drivers/serial/serial-uclass.c:51:25: error: ?gd_t? has no member named ?dm_root?
+(am335x_sl50) make[2]: *** [drivers/serial/serial-uclass.o] Error 1
+(am335x_sl50) make[1]: *** [drivers/serial] Error 2
+(am335x_sl50) make[1]: *** wait: No child processes. Stop.
+(am335x_sl50) make: *** [sub-make] Error 2

Please rebase to v2015.07-rc2 and re-submit, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150612/f7fa555f/attachment.sig>