Skip to contentSkip to conversation

perf list tracepoints problem

DISCUSSION Arnaldo Carvalho de Melo 2 participants 3 messages Jun 19, 2015

lore
Share & tools
lore
#0 lore raw

Hi,

Have you guys ever saw this:

[root@perf4 ~]# perf list
<SKIP>
mem:<addr>[:access] [Hardware
breakpoint]

[ Tracepoints not available: Success ]
[root@perf4 ~]# uname -r
4.1.0-rc8
[root@perf4 ~]# mount | grep tracefs
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime) [root@perf4 ~]# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,relatime,seclabel) [root@perf4 ~]#

[root@zoo ~]# ls -la /sys/kernel/debug/tracing/events/ | tail drwxr-xr-x. 15 root root 0 Jun 17 10:47 timer

drwxr-xr-x.   3 root root 0 Jun 17 10:47 tlb
drwxr-xr-x.   3 root root 0 Jun 17 10:47 udp
drwxr-xr-x.   4 root root 0 Jun 17 10:47 v4l2
drwxr-xr-x.  17 root root 0 Jun 17 10:47 vmscan
drwxr-xr-x.   3 root root 0 Jun 17 10:47 vsyscall
drwxr-xr-x.   6 root root 0 Jun 17 10:47 workqueue
drwxr-xr-x.  31 root root 0 Jun 17 10:47 writeback
drwxr-xr-x.  37 root root 0 Jun 17 10:47 xen
drwxr-xr-x.  11 root root 0 Jun 17 10:47 xhci-hcd

[root@zoo ~]#

?

Just a heads up, will continue investigating after some food...

- Arnaldo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 29 lines · On Fri, 19 Jun 2015 13:19:53 -0300 Arnaldo Carvalho de Melo <[email protected]>…

Hi,

Have you guys ever saw this:

[root@perf4 ~]# perf list
<SKIP>
mem:<addr>[:access] [Hardware
breakpoint]

[ Tracepoints not available: Success ]
[root@perf4 ~]# uname -r
4.1.0-rc8
[root@perf4 ~]# mount | grep tracefs
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime) [root@perf4 ~]# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,relatime,seclabel) [root@perf4 ~]#

[root@zoo ~]# ls -la /sys/kernel/debug/tracing/events/ | tail drwxr-xr-x. 15 root root 0 Jun 17 10:47 timer

drwxr-xr-x.   3 root root 0 Jun 17 10:47 tlb
drwxr-xr-x.   3 root root 0 Jun 17 10:47 udp
drwxr-xr-x.   4 root root 0 Jun 17 10:47 v4l2
drwxr-xr-x.  17 root root 0 Jun 17 10:47 vmscan
drwxr-xr-x.   3 root root 0 Jun 17 10:47 vsyscall
drwxr-xr-x.   6 root root 0 Jun 17 10:47 workqueue
drwxr-xr-x.  31 root root 0 Jun 17 10:47 writeback
drwxr-xr-x.  37 root root 0 Jun 17 10:47 xen
drwxr-xr-x.  11 root root 0 Jun 17 10:47 xhci-hcd
Quoted 6 lines

[root@zoo ~]#

?

Just a heads up, will continue investigating after some food...

Running the older perf that ignores tracepoints not on the debugfs system?

-- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

Em Fri, Jun 19, 2015 at 12:51:04PM -0400, Steven Rostedt escreveu:

Quoted 34 lines
Quoted 31 lines · On Fri, 19 Jun 2015 13:19:53 -0300 Arnaldo Carvalho de Melo <[email protected]>…

Hi,

Have you guys ever saw this:

[root@perf4 ~]# perf list
<SKIP>
mem:<addr>[:access] [Hardware
breakpoint]

[ Tracepoints not available: Success ]
[root@perf4 ~]# uname -r
4.1.0-rc8
[root@perf4 ~]# mount | grep tracefs
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime) [root@perf4 ~]# mount | grep debugfs
debugfs on /sys/kernel/debug type debugfs (rw,relatime,seclabel) [root@perf4 ~]#

[root@zoo ~]# ls -la /sys/kernel/debug/tracing/events/ | tail drwxr-xr-x. 15 root root 0 Jun 17 10:47 timer

drwxr-xr-x.   3 root root 0 Jun 17 10:47 tlb
drwxr-xr-x.   3 root root 0 Jun 17 10:47 udp
drwxr-xr-x.   4 root root 0 Jun 17 10:47 v4l2
drwxr-xr-x.  17 root root 0 Jun 17 10:47 vmscan
drwxr-xr-x.   3 root root 0 Jun 17 10:47 vsyscall
drwxr-xr-x.   6 root root 0 Jun 17 10:47 workqueue
drwxr-xr-x.  31 root root 0 Jun 17 10:47 writeback
drwxr-xr-x.  37 root root 0 Jun 17 10:47 xen
drwxr-xr-x.  11 root root 0 Jun 17 10:47 xhci-hcd

[root@zoo ~]#

Quoted 7 lines
Quoted 4 lines

?

Just a heads up, will continue investigating after some food...

Running the older perf that ignores tracepoints not on the debugfs system?

Right, I thought I was, but there was a perf-3.10...rpm installed that was being used instead of my ~/bin/perf new binary, removed the rpm and it lists the tracepoints now, should've used 'perf --version' before hitting the send button, sorry about that.

- Arnaldo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/