da9062: DA9062 driver submission
Subsystems (6)
v5 cover da9062: DA9062 driver submission
From: S Twiss <[email protected]>
This patch set adds support for the Dialog DA9062 Power Management IC.
In this patch set the following is provided:
- [PATCH V5 1/2]: MFD core support
- [PATCH V5 2/2]: Add bindings for all DA9062 components
Changes in V5
- The [PATCH V4 2/3] Watchdog driver has made it into linux-next next-20150701 and has been dropped from this patch set.
Changes in V4
- Rebase patches from linux-next/v4.1-rc3 to linux-next/v4.1-rc5
- [PATCH V3 2/4] BUCK and LDO regulator driver accepted by Mark Brown
- See https://lkml.org/lkml/2015/5/21/313 for details
- Reorder remaining patches for the PATCH V4 submission
Changes in V3:
- No overall main changes, see individal patches for details
Changes in V2:
- Alter subject title in cover letter
- Reordered the patch numbering: now 4/4 patches instead of 6/6
- Dropped [PATCH V1 3/6] RTC driver
- Dropped [PATCH V1 4/6] OnKey driver
This patch set applies against linux-next and next-20150701
Thank you,
Steve Twiss, Dialog Semiconductor Ltd.
S Twiss (2):
mfd: da9062: DA9062 MFD core driver
devicetree: da9062: Add bindings for DA9062 driver
Documentation/devicetree/bindings/mfd/da9062.txt | 79 ++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 3 +- drivers/mfd/da9062-core.c | 512 ++++++++++ include/linux/mfd/da9062/core.h | 50 + include/linux/mfd/da9062/registers.h | 1108 ++++++++++++++++++++++ 6 files changed, 1763 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt create mode 100644 drivers/mfd/da9062-core.c create mode 100644 include/linux/mfd/da9062/core.h create mode 100644 include/linux/mfd/da9062/registers.h
Signature · 6 lines
end-of-patch for PATCH V5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v5 1/2 mfd: da9062: DA9062 MFD core driver
From: S Twiss <[email protected]>
Add MFD core driver support for DA9062
---
Changes in V5:
- Alter register.h file with the following:
bit macro change defines of the form (0x01<<N) to BIT(N) zero shift change defines of the form (0xM<<0) to 0xM
Changes in V4:
- Removal of struct da9062 unrequired data from core.h and driver code
- Remove IRQ handler for VDD_WARN and corresponding IRQ request code
- Use DEFINE_RES_NAMED() macro for resource definitions
- Refactor da9062_clear_fault_log() to remove inconsistencies
- Refactor da9062_device_init() and da9062_irq_init() into probe()
- Add new function get_device_type() for variant and device_id information
- devm_kzalloc to alloc *chip instead of struct and use not-chip on error
- Move da9062_dt_ids closer to usage
- Move LUT definitions into da9062_regmap_config structure
- Erase da9062_device_exit() abstractions
- Clean up header inclusions through removal of redundant entries
- Whitespace and string literal discipline
Changes in V3:
- Removed references to the RTC and OnKey in the mfd_cell definition.
Changes in V2:
- Copyright headers GPL v2 (and later) match correct 'GPL' in MODULE_LICENSE
- Ensure DA9062 core is tristate in Kconfig so it can be built as a module
- Move VDD_WARN code and resource into the core instead of regulator driver
This patch applies against linux-next and next-20150701
drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 3 +- drivers/mfd/da9062-core.c | 512 ++++++++++++++++ include/linux/mfd/da9062/core.h | 50 ++ include/linux/mfd/da9062/registers.h | 1108 ++++++++++++++++++++++++++++++++++ 5 files changed, 1684 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/da9062-core.c create mode 100644 include/linux/mfd/da9062/core.h create mode 100644 include/linux/mfd/da9062/registers.h
drivers/mfd/Kconfig +12 -0
@@ -186,6 +186,18 @@ config MFD_DA9055 This driver can be built as a module. If built as a module it will be called "da9055" +config MFD_DA9062 + tristate "Dialog Semiconductor DA9062 PMIC Support" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + Say yes here for support for the Dialog Semiconductor DA9062 PMIC. + This includes the I2C driver and core APIs. + Additional drivers must be enabled in order to use the functionality + of the device. + config MFD_DA9063 bool "Dialog Semiconductor DA9063 PMIC Support" select MFD_CORE
drivers/mfd/Makefile +2 -1
@@ -110,10 +110,11 @@ obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o da9055-objs := da9055-core.o da9055-i2c.o obj-$(CONFIG_MFD_DA9055) += da9055.o - +obj-$(CONFIG_MFD_DA9062) += da9062-core.o da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_DA9150) += da9150-core.o + obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o
drivers/mfd/da9062-core.c new file +512 -0
512 lines not on this page · raw message
include/linux/mfd/da9062/core.h new file +50 -0
50 lines not on this page · raw message
include/linux/mfd/da9062/registers.h new file +1108 -0
1,108 lines not on this page · raw message
Signature · 6 lines
end-of-patch for PATCH V5 -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Lee Jones
AppliedRe: [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
Quoted 38 lines · S Twiss
From: S Twiss <[email protected]>
Add MFD core driver support for DA9062
Signed-off-by Steve Twiss <[email protected]>---
Changes in V5:
- Alterregister.hfile with the following:
bit macro change defines of the form (0x01<<N) to BIT(N) zero shift change defines of the form (0xM<<0) to 0xMChanges in V4:
- Removal of struct da9062 unrequired data fromcore.hand driver code
- Remove IRQ handler forVDD_WARNand corresponding IRQ request code
- UseDEFINE_RES_NAMED()macro for resource definitions
- Refactorda9062_clear_fault_log()to remove inconsistencies
- Refactorda9062_device_init()andda9062_irq_init()intoprobe()
- Add new functionget_device_type()for variant anddevice_idinformation
-devm_kzallocto alloc *chip instead of struct and use not-chip on error
- Moveda9062_dt_idscloser to usage
- Move LUT definitions intoda9062_regmap_configstructure
- Eraseda9062_device_exit()abstractions
- Clean up header inclusions through removal of redundant entries
- Whitespace and string literal disciplineChanges in V3:
- Removed references to the RTC and OnKey in themfd_celldefinition.Changes in V2:
- Copyright headers GPL v2 (and later) match correct 'GPL' inMODULE_LICENSE
- Ensure DA9062 core is tristate inKconfigso it can be built as a module
- MoveVDD_WARNcode and resource into the core instead of regulator driverThis patch applies against linux-next and next-20150701
Quoted 9 lines
drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 3 +- drivers/mfd/da9062-core.c | 512 ++++++++++++++++ include/linux/mfd/da9062/core.h | 50 ++ include/linux/mfd/da9062/registers.h | 1108 ++++++++++++++++++++++++++++++++++ 5 files changed, 1684 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/da9062-core.c create mode 100644 include/linux/mfd/da9062/core.h create mode 100644 include/linux/mfd/da9062/registers.h
Applied, thanks.
Quoted 1,728 lines
drivers/mfd/Kconfig +12
-0@@ -186,6 +186,18 @@ config MFD_DA9055 This driver can be built as a module. If built as a module it will be called "da9055" +config MFD_DA9062 + tristate "Dialog Semiconductor DA9062 PMIC Support" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + Say yes here for support for the Dialog Semiconductor DA9062 PMIC. + This includes the I2C driver and core APIs. + Additional drivers must be enabled in order to use the functionality + of the device. + config MFD_DA9063 bool "Dialog Semiconductor DA9063 PMIC Support" select MFD_COREdrivers/mfd/Makefile +2
-1@@ -110,10 +110,11 @@ obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o da9055-objs := da9055-core.o da9055-i2c.o obj-$(CONFIG_MFD_DA9055) += da9055.o - +obj-$(CONFIG_MFD_DA9062) += da9062-core.o da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_DA9150) += da9150-core.o + obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.odrivers/mfd/da9062-core.c new file +512
-0@@ -0,0 +1,512 @@ +/* +* Core, IRQ and I2C device driver for DA9062 PMIC +* Copyright (C) 2015 Dialog Semiconductor Ltd. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/i2c.h> +#include <linux/mfd/da9062/core.h> +#include <linux/mfd/da9062/registers.h> +#include <linux/regulator/of_regulator.h> + +#define DA9062_REG_EVENT_A_OFFSET 0 +#define DA9062_REG_EVENT_B_OFFSET 1 +#define DA9062_REG_EVENT_C_OFFSET 2 + +static struct regmap_irq da9062_irqs[] = { +/* EVENT A */ + [DA9062_IRQ_ONKEY ] = { + .reg_offset =DA9062_REG_EVENT_A_OFFSET , + .mask =DA9062AA_M_NONKEY_MASK , + }, + [DA9062_IRQ_ALARM ] = { + .reg_offset =DA9062_REG_EVENT_A_OFFSET , + .mask =DA9062AA_M_ALARM_MASK , + }, + [DA9062_IRQ_TICK ] = { + .reg_offset =DA9062_REG_EVENT_A_OFFSET , + .mask =DA9062AA_M_TICK_MASK , + }, + [DA9062_IRQ_WDG_WARN ] = { + .reg_offset =DA9062_REG_EVENT_A_OFFSET , + .mask =DA9062AA_M_WDG_WARN_MASK , + }, + [DA9062_IRQ_SEQ_RDY ] = { + .reg_offset =DA9062_REG_EVENT_A_OFFSET , + .mask =DA9062AA_M_SEQ_RDY_MASK , + }, +/* EVENT B */ + [DA9062_IRQ_TEMP ] = { + .reg_offset =DA9062_REG_EVENT_B_OFFSET , + .mask =DA9062AA_M_TEMP_MASK , + }, + [DA9062_IRQ_LDO_LIM ] = { + .reg_offset =DA9062_REG_EVENT_B_OFFSET , + .mask =DA9062AA_M_LDO_LIM_MASK , + }, + [DA9062_IRQ_DVC_RDY ] = { + .reg_offset =DA9062_REG_EVENT_B_OFFSET , + .mask =DA9062AA_M_DVC_RDY_MASK , + }, + [DA9062_IRQ_VDD_WARN ] = { + .reg_offset =DA9062_REG_EVENT_B_OFFSET , + .mask =DA9062AA_M_VDD_WARN_MASK , + }, +/* EVENT C */ + [DA9062_IRQ_GPI0 ] = { + .reg_offset =DA9062_REG_EVENT_C_OFFSET , + .mask =DA9062AA_M_GPI0_MASK , + }, + [DA9062_IRQ_GPI1 ] = { + .reg_offset =DA9062_REG_EVENT_C_OFFSET , + .mask =DA9062AA_M_GPI1_MASK , + }, + [DA9062_IRQ_GPI2 ] = { + .reg_offset =DA9062_REG_EVENT_C_OFFSET , + .mask =DA9062AA_M_GPI2_MASK , + }, + [DA9062_IRQ_GPI3 ] = { + .reg_offset =DA9062_REG_EVENT_C_OFFSET , + .mask =DA9062AA_M_GPI3_MASK , + }, + [DA9062_IRQ_GPI4 ] = { + .reg_offset =DA9062_REG_EVENT_C_OFFSET , + .mask =DA9062AA_M_GPI4_MASK , + }, +}; + +static struct regmap_irq_chip da9062_irq_chip = { + .name ="da9062-irq" , + .irqs = da9062_irqs, + .num_irqs =DA9062_NUM_IRQ , + .num_regs =3 , + .status_base =DA9062AA_EVENT_A , + .mask_base =DA9062AA_IRQ_MASK_A , + .ack_base =DA9062AA_EVENT_A , +}; + +static struct resource da9062_core_resources[] = { +DEFINE_RES_NAMED (DA9062_IRQ_VDD_WARN ,1 ,"VDD_WARN" ,IORESOURCE_IRQ ), +}; + +static struct resource da9062_regulators_resources[] = { +DEFINE_RES_NAMED (DA9062_IRQ_LDO_LIM ,1 ,"LDO_LIM" ,IORESOURCE_IRQ ), +}; + +static struct resource da9062_thermal_resources[] = { +DEFINE_RES_NAMED (DA9062_IRQ_TEMP ,1 ,"THERMAL" ,IORESOURCE_IRQ ), +}; + +static struct resource da9062_wdt_resources[] = { +DEFINE_RES_NAMED (DA9062_IRQ_WDG_WARN ,1 ,"WD_WARN" ,IORESOURCE_IRQ ), +}; + +static const struct mfd_cell da9062_devs[] = { + { + .name ="da9062-core" , + .num_resources =ARRAY_SIZE (da9062_core_resources), + .resources = da9062_core_resources, + }, + { + .name ="da9062-regulators" , + .num_resources =ARRAY_SIZE (da9062_regulators_resources), + .resources = da9062_regulators_resources, + }, + { + .name ="da9062-watchdog" , + .num_resources =ARRAY_SIZE (da9062_wdt_resources), + .resources = da9062_wdt_resources, + .of_compatible ="dlg,da9062-wdt" , + }, + { + .name ="da9062-thermal" , + .num_resources =ARRAY_SIZE (da9062_thermal_resources), + .resources = da9062_thermal_resources, + .of_compatible ="dlg,da9062-thermal" , + }, +}; + +static int da9062_clear_fault_log (struct da9062 *chip) +{ +int ret; +int fault_log; + + ret =regmap_read (chip->regmap,DA9062AA_FAULT_LOG , &fault_log); +if (ret <0 ) +return ret; + +if (fault_log) { +if (fault_log &DA9062AA_TWD_ERROR_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: TWD_ERROR\n" ); +if (fault_log &DA9062AA_POR_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: POR\n" ); +if (fault_log &DA9062AA_VDD_FAULT_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: VDD_FAULT\n" ); +if (fault_log &DA9062AA_VDD_START_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: VDD_START\n" ); +if (fault_log &DA9062AA_TEMP_CRIT_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: TEMP_CRIT\n" ); +if (fault_log &DA9062AA_KEY_RESET_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: KEY_RESET\n" ); +if (fault_log &DA9062AA_NSHUTDOWN_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: NSHUTDOWN\n" ); +if (fault_log &DA9062AA_WAIT_SHUT_MASK ) +dev_dbg (chip->dev,"Fault log entry detected: WAIT_SHUT\n" ); + + ret =regmap_write (chip->regmap,DA9062AA_FAULT_LOG , + fault_log); + } + +return ret; +} + +int get_device_type (struct da9062 *chip) +{ +int device_id, variant_id, variant_mrc; +int ret; + + ret =regmap_read (chip->regmap,DA9062AA_DEVICE_ID , &device_id); +if (ret <0 ) { +dev_err (chip->dev,"Cannot read chip ID.\n" ); +return -EIO ; + } +if (device_id !=DA9062_PMIC_DEVICE_ID ) { +dev_err (chip->dev,"Invalid device ID: 0x%02x\n" , device_id); +return -ENODEV ; + } + + ret =regmap_read (chip->regmap,DA9062AA_VARIANT_ID , &variant_id); +if (ret <0 ) { +dev_err (chip->dev,"Cannot read chip variant id.\n" ); +return -EIO ; + } + +dev_info (chip->dev, +"Device detected (device-ID: 0x%02X, var-ID: 0x%02X)\n" , + device_id, variant_id); + + variant_mrc = (variant_id &DA9062AA_MRC_MASK ) >>DA9062AA_MRC_SHIFT ; + +if (variant_mrc <DA9062_PMIC_VARIANT_MRC_AA ) { +dev_err (chip->dev, +"Cannot support variant MRC: 0x%02X\n" , variant_mrc); +return -ENODEV ; + } + +return ret; +} + +static const struct regmap_range da9062_aa_readable_ranges[] = { + { + .range_min =DA9062AA_PAGE_CON , + .range_max =DA9062AA_STATUS_B , + }, { + .range_min =DA9062AA_STATUS_D , + .range_max =DA9062AA_EVENT_C , + }, { + .range_min =DA9062AA_IRQ_MASK_A , + .range_max =DA9062AA_IRQ_MASK_C , + }, { + .range_min =DA9062AA_CONTROL_A , + .range_max =DA9062AA_GPIO_4 , + }, { + .range_min =DA9062AA_GPIO_WKUP_MODE , + .range_max =DA9062AA_BUCK4_CONT , + }, { + .range_min =DA9062AA_BUCK3_CONT , + .range_max =DA9062AA_BUCK3_CONT , + }, { + .range_min =DA9062AA_LDO1_CONT , + .range_max =DA9062AA_LDO4_CONT , + }, { + .range_min =DA9062AA_DVC_1 , + .range_max =DA9062AA_DVC_1 , + }, { + .range_min =DA9062AA_COUNT_S , + .range_max =DA9062AA_SECOND_D , + }, { + .range_min =DA9062AA_SEQ , + .range_max =DA9062AA_ID_4_3 , + }, { + .range_min =DA9062AA_ID_12_11 , + .range_max =DA9062AA_ID_16_15 , + }, { + .range_min =DA9062AA_ID_22_21 , + .range_max =DA9062AA_ID_32_31 , + }, { + .range_min =DA9062AA_SEQ_A , + .range_max =DA9062AA_BUCK3_CFG , + }, { + .range_min =DA9062AA_VBUCK2_A , + .range_max =DA9062AA_VBUCK4_A , + }, { + .range_min =DA9062AA_VBUCK3_A , + .range_max =DA9062AA_VBUCK3_A , + }, { + .range_min =DA9062AA_VLDO1_A , + .range_max =DA9062AA_VLDO4_A , + }, { + .range_min =DA9062AA_VBUCK2_B , + .range_max =DA9062AA_VBUCK4_B , + }, { + .range_min =DA9062AA_VBUCK3_B , + .range_max =DA9062AA_VBUCK3_B , + }, { + .range_min =DA9062AA_VLDO1_B , + .range_max =DA9062AA_VLDO4_B , + }, { + .range_min =DA9062AA_BBAT_CONT , + .range_max =DA9062AA_BBAT_CONT , + }, { + .range_min =DA9062AA_INTERFACE , + .range_max =DA9062AA_CONFIG_E , + }, { + .range_min =DA9062AA_CONFIG_G , + .range_max =DA9062AA_CONFIG_K , + }, { + .range_min =DA9062AA_CONFIG_M , + .range_max =DA9062AA_CONFIG_M , + }, { + .range_min =DA9062AA_TRIM_CLDR , + .range_max =DA9062AA_GP_ID_19 , + }, { + .range_min =DA9062AA_DEVICE_ID , + .range_max =DA9062AA_CONFIG_ID , + }, +}; + +static const struct regmap_range da9062_aa_writeable_ranges[] = { + { + .range_min =DA9062AA_PAGE_CON , + .range_max =DA9062AA_PAGE_CON , + }, { + .range_min =DA9062AA_FAULT_LOG , + .range_max =DA9062AA_EVENT_C , + }, { + .range_min =DA9062AA_IRQ_MASK_A , + .range_max =DA9062AA_IRQ_MASK_C , + }, { + .range_min =DA9062AA_CONTROL_A , + .range_max =DA9062AA_GPIO_4 , + }, { + .range_min =DA9062AA_GPIO_WKUP_MODE , + .range_max =DA9062AA_BUCK4_CONT , + }, { + .range_min =DA9062AA_BUCK3_CONT , + .range_max =DA9062AA_BUCK3_CONT , + }, { + .range_min =DA9062AA_LDO1_CONT , + .range_max =DA9062AA_LDO4_CONT , + }, { + .range_min =DA9062AA_DVC_1 , + .range_max =DA9062AA_DVC_1 , + }, { + .range_min =DA9062AA_COUNT_S , + .range_max =DA9062AA_ALARM_Y , + }, { + .range_min =DA9062AA_SEQ , + .range_max =DA9062AA_ID_4_3 , + }, { + .range_min =DA9062AA_ID_12_11 , + .range_max =DA9062AA_ID_16_15 , + }, { + .range_min =DA9062AA_ID_22_21 , + .range_max =DA9062AA_ID_32_31 , + }, { + .range_min =DA9062AA_SEQ_A , + .range_max =DA9062AA_BUCK3_CFG , + }, { + .range_min =DA9062AA_VBUCK2_A , + .range_max =DA9062AA_VBUCK4_A , + }, { + .range_min =DA9062AA_VBUCK3_A , + .range_max =DA9062AA_VBUCK3_A , + }, { + .range_min =DA9062AA_VLDO1_A , + .range_max =DA9062AA_VLDO4_A , + }, { + .range_min =DA9062AA_VBUCK2_B , + .range_max =DA9062AA_VBUCK4_B , + }, { + .range_min =DA9062AA_VBUCK3_B , + .range_max =DA9062AA_VBUCK3_B , + }, { + .range_min =DA9062AA_VLDO1_B , + .range_max =DA9062AA_VLDO4_B , + }, { + .range_min =DA9062AA_BBAT_CONT , + .range_max =DA9062AA_BBAT_CONT , + }, { + .range_min =DA9062AA_GP_ID_0 , + .range_max =DA9062AA_GP_ID_19 , + }, +}; + +static const struct regmap_range da9062_aa_volatile_ranges[] = { + { + .range_min =DA9062AA_PAGE_CON , + .range_max =DA9062AA_STATUS_B , + }, { + .range_min =DA9062AA_STATUS_D , + .range_max =DA9062AA_EVENT_C , + }, { + .range_min =DA9062AA_CONTROL_F , + .range_max =DA9062AA_CONTROL_F , + }, { + .range_min =DA9062AA_COUNT_S , + .range_max =DA9062AA_SECOND_D , + }, +}; + +static const struct regmap_access_table da9062_aa_readable_table = { + .yes_ranges = da9062_aa_readable_ranges, + .n_yes_ranges =ARRAY_SIZE (da9062_aa_readable_ranges), +}; + +static const struct regmap_access_table da9062_aa_writeable_table = { + .yes_ranges = da9062_aa_writeable_ranges, + .n_yes_ranges =ARRAY_SIZE (da9062_aa_writeable_ranges), +}; + +static const struct regmap_access_table da9062_aa_volatile_table = { + .yes_ranges = da9062_aa_volatile_ranges, + .n_yes_ranges =ARRAY_SIZE (da9062_aa_volatile_ranges), +}; + +static const struct regmap_range_cfg da9062_range_cfg[] = { + { + .range_min =DA9062AA_PAGE_CON , + .range_max =DA9062AA_CONFIG_ID , + .selector_reg =DA9062AA_PAGE_CON , + .selector_mask =1 <<DA9062_I2C_PAGE_SEL_SHIFT , + .selector_shift =DA9062_I2C_PAGE_SEL_SHIFT , + .window_start =0 , + .window_len =256 , + } +}; + +static struct regmap_config da9062_regmap_config = { + .reg_bits =8 , + .val_bits =8 , + .ranges = da9062_range_cfg, + .num_ranges =ARRAY_SIZE (da9062_range_cfg), + .max_register =DA9062AA_CONFIG_ID , + .cache_type =REGCACHE_RBTREE , + .rd_table = &da9062_aa_readable_table, + .wr_table = &da9062_aa_writeable_table, + .volatile_table = &da9062_aa_volatile_table, +}; + +static int da9062_i2c_probe (struct i2c_client *i2c, +const struct i2c_device_id *id) +{ +struct da9062 *chip; +unsigned int irq_base; +int ret; + + chip =devm_kzalloc (&i2c->dev,sizeof (*chip),GFP_KERNEL ); +if (!chip) +return -ENOMEM ; + +i2c_set_clientdata (i2c, chip); + chip->dev = &i2c->dev; + +if (!i2c->irq) { +dev_err (chip->dev,"No IRQ configured\n" ); +return -EINVAL ; + } + + chip->regmap =devm_regmap_init_i2c (i2c, &da9062_regmap_config); +if (IS_ERR (chip->regmap)) { + ret =PTR_ERR (chip->regmap); +dev_err (chip->dev,"Failed to allocate register map: %d\n" , + ret); +return ret; + } + + ret =da9062_clear_fault_log (chip); +if (ret <0 ) +dev_warn (chip->dev,"Cannot clear fault log\n" ); + + ret =get_device_type (chip); +if (ret) +return ret; + + ret =regmap_add_irq_chip (chip->regmap, i2c->irq, +IRQF_TRIGGER_LOW |IRQF_ONESHOT |IRQF_SHARED , +-1 , &da9062_irq_chip, + &chip->regmap_irq); +if (ret) { +dev_err (chip->dev,"Failed to request IRQ %d: %d\n" , + i2c->irq, ret); +return ret; + } + + irq_base =regmap_irq_chip_get_base (chip->regmap_irq); + + ret =mfd_add_devices (chip->dev,PLATFORM_DEVID_NONE , da9062_devs, +ARRAY_SIZE (da9062_devs),NULL , irq_base, +NULL ); +if (ret) { +dev_err (chip->dev,"Cannot register child devices\n" ); +regmap_del_irq_chip (i2c->irq, chip->regmap_irq); +return ret; + } + +return ret; +} + +static int da9062_i2c_remove (struct i2c_client *i2c) +{ +struct da9062 *chip =i2c_get_clientdata (i2c); + +mfd_remove_devices (chip->dev); +regmap_del_irq_chip (i2c->irq, chip->regmap_irq); + +return 0 ; +} + +static const struct i2c_device_id da9062_i2c_id[] = { + {"da9062" ,0 }, + { }, +}; +MODULE_DEVICE_TABLE (i2c, da9062_i2c_id); + +static const struct of_device_id da9062_dt_ids[] = { + { .compatible ="dlg,da9062" , }, + { } +}; +MODULE_DEVICE_TABLE (of, da9062_dt_ids); + +static struct i2c_driver da9062_i2c_driver = { + .driver = { + .name ="da9062" , + .of_match_table =of_match_ptr (da9062_dt_ids), + }, + .probe = da9062_i2c_probe, + .remove = da9062_i2c_remove, + .id_table = da9062_i2c_id, +}; + +module_i2c_driver (da9062_i2c_driver); + +MODULE_DESCRIPTION ("Core device driver for Dialog DA9062" ); +MODULE_AUTHOR ("Steve Twiss <[email protected]>" ); +MODULE_LICENSE ("GPL" );include/linux/mfd/da9062/core.h new file +50
-0@@ -0,0 +1,50 @@ +/* +* Copyright (C) 2015 Dialog Semiconductor Ltd. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __MFD_DA9062_CORE_H__ +#define __MFD_DA9062_CORE_H__ + +#include <linux/interrupt.h> +#include <linux/mfd/da9062/registers.h> + +/* Interrupts */ +enum da9062_irqs { +/* IRQ A */ +DA9062_IRQ_ONKEY , +DA9062_IRQ_ALARM , +DA9062_IRQ_TICK , +DA9062_IRQ_WDG_WARN , +DA9062_IRQ_SEQ_RDY , +/* IRQ B*/ +DA9062_IRQ_TEMP , +DA9062_IRQ_LDO_LIM , +DA9062_IRQ_DVC_RDY , +DA9062_IRQ_VDD_WARN , +/* IRQ C */ +DA9062_IRQ_GPI0 , +DA9062_IRQ_GPI1 , +DA9062_IRQ_GPI2 , +DA9062_IRQ_GPI3 , +DA9062_IRQ_GPI4 , + +DA9062_NUM_IRQ , +}; + +struct da9062 { +struct device *dev; +struct regmap *regmap; +struct regmap_irq_chip_data *regmap_irq; +}; + +#endif /* __MFD_DA9062_CORE_H__ */ include/linux/mfd/da9062/registers.h new file +1108
-0@@ -0,0 +1,1108 @@ +/* +* registers.h - REGISTERS H for DA9062 +* Copyright (C) 2015 Dialog Semiconductor Ltd. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version 2 +* of the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __DA9062_H__ +#define __DA9062_H__ + +#define DA9062_PMIC_DEVICE_ID 0x62 +#define DA9062_PMIC_VARIANT_MRC_AA 0x01 + +#define DA9062_I2C_PAGE_SEL_SHIFT 1 + +/* +* Registers +*/ + +#define DA9062AA_PAGE_CON 0x000 +#define DA9062AA_STATUS_A 0x001 +#define DA9062AA_STATUS_B 0x002 +#define DA9062AA_STATUS_D 0x004 +#define DA9062AA_FAULT_LOG 0x005 +#define DA9062AA_EVENT_A 0x006 +#define DA9062AA_EVENT_B 0x007 +#define DA9062AA_EVENT_C 0x008 +#define DA9062AA_IRQ_MASK_A 0x00A +#define DA9062AA_IRQ_MASK_B 0x00B +#define DA9062AA_IRQ_MASK_C 0x00C +#define DA9062AA_CONTROL_A 0x00E +#define DA9062AA_CONTROL_B 0x00F +#define DA9062AA_CONTROL_C 0x010 +#define DA9062AA_CONTROL_D 0x011 +#define DA9062AA_CONTROL_E 0x012 +#define DA9062AA_CONTROL_F 0x013 +#define DA9062AA_PD_DIS 0x014 +#define DA9062AA_GPIO_0_1 0x015 +#define DA9062AA_GPIO_2_3 0x016 +#define DA9062AA_GPIO_4 0x017 +#define DA9062AA_GPIO_WKUP_MODE 0x01C +#define DA9062AA_GPIO_MODE0_4 0x01D +#define DA9062AA_GPIO_OUT0_2 0x01E +#define DA9062AA_GPIO_OUT3_4 0x01F +#define DA9062AA_BUCK2_CONT 0x020 +#define DA9062AA_BUCK1_CONT 0x021 +#define DA9062AA_BUCK4_CONT 0x022 +#define DA9062AA_BUCK3_CONT 0x024 +#define DA9062AA_LDO1_CONT 0x026 +#define DA9062AA_LDO2_CONT 0x027 +#define DA9062AA_LDO3_CONT 0x028 +#define DA9062AA_LDO4_CONT 0x029 +#define DA9062AA_DVC_1 0x032 +#define DA9062AA_COUNT_S 0x040 +#define DA9062AA_COUNT_MI 0x041 +#define DA9062AA_COUNT_H 0x042 +#define DA9062AA_COUNT_D 0x043 +#define DA9062AA_COUNT_MO 0x044 +#define DA9062AA_COUNT_Y 0x045 +#define DA9062AA_ALARM_S 0x046 +#define DA9062AA_ALARM_MI 0x047 +#define DA9062AA_ALARM_H 0x048 +#define DA9062AA_ALARM_D 0x049 +#define DA9062AA_ALARM_MO 0x04A +#define DA9062AA_ALARM_Y 0x04B +#define DA9062AA_SECOND_A 0x04C +#define DA9062AA_SECOND_B 0x04D +#define DA9062AA_SECOND_C 0x04E +#define DA9062AA_SECOND_D 0x04F +#define DA9062AA_SEQ 0x081 +#define DA9062AA_SEQ_TIMER 0x082 +#define DA9062AA_ID_2_1 0x083 +#define DA9062AA_ID_4_3 0x084 +#define DA9062AA_ID_12_11 0x088 +#define DA9062AA_ID_14_13 0x089 +#define DA9062AA_ID_16_15 0x08A +#define DA9062AA_ID_22_21 0x08D +#define DA9062AA_ID_24_23 0x08E +#define DA9062AA_ID_26_25 0x08F +#define DA9062AA_ID_28_27 0x090 +#define DA9062AA_ID_30_29 0x091 +#define DA9062AA_ID_32_31 0x092 +#define DA9062AA_SEQ_A 0x095 +#define DA9062AA_SEQ_B 0x096 +#define DA9062AA_WAIT 0x097 +#define DA9062AA_EN_32K 0x098 +#define DA9062AA_RESET 0x099 +#define DA9062AA_BUCK_ILIM_A 0x09A +#define DA9062AA_BUCK_ILIM_B 0x09B +#define DA9062AA_BUCK_ILIM_C 0x09C +#define DA9062AA_BUCK2_CFG 0x09D +#define DA9062AA_BUCK1_CFG 0x09E +#define DA9062AA_BUCK4_CFG 0x09F +#define DA9062AA_BUCK3_CFG 0x0A0 +#define DA9062AA_VBUCK2_A 0x0A3 +#define DA9062AA_VBUCK1_A 0x0A4 +#define DA9062AA_VBUCK4_A 0x0A5 +#define DA9062AA_VBUCK3_A 0x0A7 +#define DA9062AA_VLDO1_A 0x0A9 +#define DA9062AA_VLDO2_A 0x0AA +#define DA9062AA_VLDO3_A 0x0AB +#define DA9062AA_VLDO4_A 0x0AC +#define DA9062AA_VBUCK2_B 0x0B4 +#define DA9062AA_VBUCK1_B 0x0B5 +#define DA9062AA_VBUCK4_B 0x0B6 +#define DA9062AA_VBUCK3_B 0x0B8 +#define DA9062AA_VLDO1_B 0x0BA +#define DA9062AA_VLDO2_B 0x0BB +#define DA9062AA_VLDO3_B 0x0BC +#define DA9062AA_VLDO4_B 0x0BD +#define DA9062AA_BBAT_CONT 0x0C5 +#define DA9062AA_INTERFACE 0x105 +#define DA9062AA_CONFIG_A 0x106 +#define DA9062AA_CONFIG_B 0x107 +#define DA9062AA_CONFIG_C 0x108 +#define DA9062AA_CONFIG_D 0x109 +#define DA9062AA_CONFIG_E 0x10A +#define DA9062AA_CONFIG_G 0x10C +#define DA9062AA_CONFIG_H 0x10D +#define DA9062AA_CONFIG_I 0x10E +#define DA9062AA_CONFIG_J 0x10F +#define DA9062AA_CONFIG_K 0x110 +#define DA9062AA_CONFIG_M 0x112 +#define DA9062AA_TRIM_CLDR 0x120 +#define DA9062AA_GP_ID_0 0x121 +#define DA9062AA_GP_ID_1 0x122 +#define DA9062AA_GP_ID_2 0x123 +#define DA9062AA_GP_ID_3 0x124 +#define DA9062AA_GP_ID_4 0x125 +#define DA9062AA_GP_ID_5 0x126 +#define DA9062AA_GP_ID_6 0x127 +#define DA9062AA_GP_ID_7 0x128 +#define DA9062AA_GP_ID_8 0x129 +#define DA9062AA_GP_ID_9 0x12A +#define DA9062AA_GP_ID_10 0x12B +#define DA9062AA_GP_ID_11 0x12C +#define DA9062AA_GP_ID_12 0x12D +#define DA9062AA_GP_ID_13 0x12E +#define DA9062AA_GP_ID_14 0x12F +#define DA9062AA_GP_ID_15 0x130 +#define DA9062AA_GP_ID_16 0x131 +#define DA9062AA_GP_ID_17 0x132 +#define DA9062AA_GP_ID_18 0x133 +#define DA9062AA_GP_ID_19 0x134 +#define DA9062AA_DEVICE_ID 0x181 +#define DA9062AA_VARIANT_ID 0x182 +#define DA9062AA_CUSTOMER_ID 0x183 +#define DA9062AA_CONFIG_ID 0x184 + +/* +* Bit fields +*/ + +/* DA9062AA_PAGE_CON = 0x000 */ +#define DA9062AA_PAGE_SHIFT 0 +#define DA9062AA_PAGE_MASK 0x3f +#define DA9062AA_WRITE_MODE_SHIFT 6 +#define DA9062AA_WRITE_MODE_MASK BIT(6) +#define DA9062AA_REVERT_SHIFT 7 +#define DA9062AA_REVERT_MASK BIT(7) + +/* DA9062AA_STATUS_A = 0x001 */ +#define DA9062AA_NONKEY_SHIFT 0 +#define DA9062AA_NONKEY_MASK 0x01 +#define DA9062AA_DVC_BUSY_SHIFT 2 +#define DA9062AA_DVC_BUSY_MASK BIT(2) + +/* DA9062AA_STATUS_B = 0x002 */ +#define DA9062AA_GPI0_SHIFT 0 +#define DA9062AA_GPI0_MASK 0x01 +#define DA9062AA_GPI1_SHIFT 1 +#define DA9062AA_GPI1_MASK BIT(1) +#define DA9062AA_GPI2_SHIFT 2 +#define DA9062AA_GPI2_MASK BIT(2) +#define DA9062AA_GPI3_SHIFT 3 +#define DA9062AA_GPI3_MASK BIT(3) +#define DA9062AA_GPI4_SHIFT 4 +#define DA9062AA_GPI4_MASK BIT(4) + +/* DA9062AA_STATUS_D = 0x004 */ +#define DA9062AA_LDO1_ILIM_SHIFT 0 +#define DA9062AA_LDO1_ILIM_MASK 0x01 +#define DA9062AA_LDO2_ILIM_SHIFT 1 +#define DA9062AA_LDO2_ILIM_MASK BIT(1) +#define DA9062AA_LDO3_ILIM_SHIFT 2 +#define DA9062AA_LDO3_ILIM_MASK BIT(2) +#define DA9062AA_LDO4_ILIM_SHIFT 3 +#define DA9062AA_LDO4_ILIM_MASK BIT(3) + +/* DA9062AA_FAULT_LOG = 0x005 */ +#define DA9062AA_TWD_ERROR_SHIFT 0 +#define DA9062AA_TWD_ERROR_MASK 0x01 +#define DA9062AA_POR_SHIFT 1 +#define DA9062AA_POR_MASK BIT(1) +#define DA9062AA_VDD_FAULT_SHIFT 2 +#define DA9062AA_VDD_FAULT_MASK BIT(2) +#define DA9062AA_VDD_START_SHIFT 3 +#define DA9062AA_VDD_START_MASK BIT(3) +#define DA9062AA_TEMP_CRIT_SHIFT 4 +#define DA9062AA_TEMP_CRIT_MASK BIT(4) +#define DA9062AA_KEY_RESET_SHIFT 5 +#define DA9062AA_KEY_RESET_MASK BIT(5) +#define DA9062AA_NSHUTDOWN_SHIFT 6 +#define DA9062AA_NSHUTDOWN_MASK BIT(6) +#define DA9062AA_WAIT_SHUT_SHIFT 7 +#define DA9062AA_WAIT_SHUT_MASK BIT(7) + +/* DA9062AA_EVENT_A = 0x006 */ +#define DA9062AA_E_NONKEY_SHIFT 0 +#define DA9062AA_E_NONKEY_MASK 0x01 +#define DA9062AA_E_ALARM_SHIFT 1 +#define DA9062AA_E_ALARM_MASK BIT(1) +#define DA9062AA_E_TICK_SHIFT 2 +#define DA9062AA_E_TICK_MASK BIT(2) +#define DA9062AA_E_WDG_WARN_SHIFT 3 +#define DA9062AA_E_WDG_WARN_MASK BIT(3) +#define DA9062AA_E_SEQ_RDY_SHIFT 4 +#define DA9062AA_E_SEQ_RDY_MASK BIT(4) +#define DA9062AA_EVENTS_B_SHIFT 5 +#define DA9062AA_EVENTS_B_MASK BIT(5) +#define DA9062AA_EVENTS_C_SHIFT 6 +#define DA9062AA_EVENTS_C_MASK BIT(6) + +/* DA9062AA_EVENT_B = 0x007 */ +#define DA9062AA_E_TEMP_SHIFT 1 +#define DA9062AA_E_TEMP_MASK BIT(1) +#define DA9062AA_E_LDO_LIM_SHIFT 3 +#define DA9062AA_E_LDO_LIM_MASK BIT(3) +#define DA9062AA_E_DVC_RDY_SHIFT 5 +#define DA9062AA_E_DVC_RDY_MASK BIT(5) +#define DA9062AA_E_VDD_WARN_SHIFT 7 +#define DA9062AA_E_VDD_WARN_MASK BIT(7) + +/* DA9062AA_EVENT_C = 0x008 */ +#define DA9062AA_E_GPI0_SHIFT 0 +#define DA9062AA_E_GPI0_MASK 0x01 +#define DA9062AA_E_GPI1_SHIFT 1 +#define DA9062AA_E_GPI1_MASK BIT(1) +#define DA9062AA_E_GPI2_SHIFT 2 +#define DA9062AA_E_GPI2_MASK BIT(2) +#define DA9062AA_E_GPI3_SHIFT 3 +#define DA9062AA_E_GPI3_MASK BIT(3) +#define DA9062AA_E_GPI4_SHIFT 4 +#define DA9062AA_E_GPI4_MASK BIT(4) + +/* DA9062AA_IRQ_MASK_A = 0x00A */ +#define DA9062AA_M_NONKEY_SHIFT 0 +#define DA9062AA_M_NONKEY_MASK 0x01 +#define DA9062AA_M_ALARM_SHIFT 1 +#define DA9062AA_M_ALARM_MASK BIT(1) +#define DA9062AA_M_TICK_SHIFT 2 +#define DA9062AA_M_TICK_MASK BIT(2) +#define DA9062AA_M_WDG_WARN_SHIFT 3 +#define DA9062AA_M_WDG_WARN_MASK BIT(3) +#define DA9062AA_M_SEQ_RDY_SHIFT 4 +#define DA9062AA_M_SEQ_RDY_MASK BIT(4) + +/* DA9062AA_IRQ_MASK_B = 0x00B */ +#define DA9062AA_M_TEMP_SHIFT 1 +#define DA9062AA_M_TEMP_MASK BIT(1) +#define DA9062AA_M_LDO_LIM_SHIFT 3 +#define DA9062AA_M_LDO_LIM_MASK BIT(3) +#define DA9062AA_M_DVC_RDY_SHIFT 5 +#define DA9062AA_M_DVC_RDY_MASK BIT(5) +#define DA9062AA_M_VDD_WARN_SHIFT 7 +#define DA9062AA_M_VDD_WARN_MASK BIT(7) + +/* DA9062AA_IRQ_MASK_C = 0x00C */ +#define DA9062AA_M_GPI0_SHIFT 0 +#define DA9062AA_M_GPI0_MASK 0x01 +#define DA9062AA_M_GPI1_SHIFT 1 +#define DA9062AA_M_GPI1_MASK BIT(1) +#define DA9062AA_M_GPI2_SHIFT 2 +#define DA9062AA_M_GPI2_MASK BIT(2) +#define DA9062AA_M_GPI3_SHIFT 3 +#define DA9062AA_M_GPI3_MASK BIT(3) +#define DA9062AA_M_GPI4_SHIFT 4 +#define DA9062AA_M_GPI4_MASK BIT(4) + +/* DA9062AA_CONTROL_A = 0x00E */ +#define DA9062AA_SYSTEM_EN_SHIFT 0 +#define DA9062AA_SYSTEM_EN_MASK 0x01 +#define DA9062AA_POWER_EN_SHIFT 1 +#define DA9062AA_POWER_EN_MASK BIT(1) +#define DA9062AA_POWER1_EN_SHIFT 2 +#define DA9062AA_POWER1_EN_MASK BIT(2) +#define DA9062AA_STANDBY_SHIFT 3 +#define DA9062AA_STANDBY_MASK BIT(3) +#define DA9062AA_M_SYSTEM_EN_SHIFT 4 +#define DA9062AA_M_SYSTEM_EN_MASK BIT(4) +#define DA9062AA_M_POWER_EN_SHIFT 5 +#define DA9062AA_M_POWER_EN_MASK BIT(5) +#define DA9062AA_M_POWER1_EN_SHIFT 6 +#define DA9062AA_M_POWER1_EN_MASK BIT(6) + +/* DA9062AA_CONTROL_B = 0x00F */ +#define DA9062AA_WATCHDOG_PD_SHIFT 1 +#define DA9062AA_WATCHDOG_PD_MASK BIT(1) +#define DA9062AA_FREEZE_EN_SHIFT 2 +#define DA9062AA_FREEZE_EN_MASK BIT(2) +#define DA9062AA_NRES_MODE_SHIFT 3 +#define DA9062AA_NRES_MODE_MASK BIT(3) +#define DA9062AA_NONKEY_LOCK_SHIFT 4 +#define DA9062AA_NONKEY_LOCK_MASK BIT(4) +#define DA9062AA_NFREEZE_SHIFT 5 +#define DA9062AA_NFREEZE_MASK (0x03 << 5) +#define DA9062AA_BUCK_SLOWSTART_SHIFT 7 +#define DA9062AA_BUCK_SLOWSTART_MASK BIT(7) + +/* DA9062AA_CONTROL_C = 0x010 */ +#define DA9062AA_DEBOUNCING_SHIFT 0 +#define DA9062AA_DEBOUNCING_MASK 0x07 +#define DA9062AA_AUTO_BOOT_SHIFT 3 +#define DA9062AA_AUTO_BOOT_MASK BIT(3) +#define DA9062AA_OTPREAD_EN_SHIFT 4 +#define DA9062AA_OTPREAD_EN_MASK BIT(4) +#define DA9062AA_SLEW_RATE_SHIFT 5 +#define DA9062AA_SLEW_RATE_MASK (0x03 << 5) +#define DA9062AA_DEF_SUPPLY_SHIFT 7 +#define DA9062AA_DEF_SUPPLY_MASK BIT(7) + +/* DA9062AA_CONTROL_D = 0x011 */ +#define DA9062AA_TWDSCALE_SHIFT 0 +#define DA9062AA_TWDSCALE_MASK 0x07 + +/* DA9062AA_CONTROL_E = 0x012 */ +#define DA9062AA_RTC_MODE_PD_SHIFT 0 +#define DA9062AA_RTC_MODE_PD_MASK 0x01 +#define DA9062AA_RTC_MODE_SD_SHIFT 1 +#define DA9062AA_RTC_MODE_SD_MASK BIT(1) +#define DA9062AA_RTC_EN_SHIFT 2 +#define DA9062AA_RTC_EN_MASK BIT(2) +#define DA9062AA_V_LOCK_SHIFT 7 +#define DA9062AA_V_LOCK_MASK BIT(7) + +/* DA9062AA_CONTROL_F = 0x013 */ +#define DA9062AA_WATCHDOG_SHIFT 0 +#define DA9062AA_WATCHDOG_MASK 0x01 +#define DA9062AA_SHUTDOWN_SHIFT 1 +#define DA9062AA_SHUTDOWN_MASK BIT(1) +#define DA9062AA_WAKE_UP_SHIFT 2 +#define DA9062AA_WAKE_UP_MASK BIT(2) + +/* DA9062AA_PD_DIS = 0x014 */ +#define DA9062AA_GPI_DIS_SHIFT 0 +#define DA9062AA_GPI_DIS_MASK 0x01 +#define DA9062AA_PMIF_DIS_SHIFT 2 +#define DA9062AA_PMIF_DIS_MASK BIT(2) +#define DA9062AA_CLDR_PAUSE_SHIFT 4 +#define DA9062AA_CLDR_PAUSE_MASK BIT(4) +#define DA9062AA_BBAT_DIS_SHIFT 5 +#define DA9062AA_BBAT_DIS_MASK BIT(5) +#define DA9062AA_OUT32K_PAUSE_SHIFT 6 +#define DA9062AA_OUT32K_PAUSE_MASK BIT(6) +#define DA9062AA_PMCONT_DIS_SHIFT 7 +#define DA9062AA_PMCONT_DIS_MASK BIT(7) + +/* DA9062AA_GPIO_0_1 = 0x015 */ +#define DA9062AA_GPIO0_PIN_SHIFT 0 +#define DA9062AA_GPIO0_PIN_MASK 0x03 +#define DA9062AA_GPIO0_TYPE_SHIFT 2 +#define DA9062AA_GPIO0_TYPE_MASK BIT(2) +#define DA9062AA_GPIO0_WEN_SHIFT 3 +#define DA9062AA_GPIO0_WEN_MASK BIT(3) +#define DA9062AA_GPIO1_PIN_SHIFT 4 +#define DA9062AA_GPIO1_PIN_MASK (0x03 << 4) +#define DA9062AA_GPIO1_TYPE_SHIFT 6 +#define DA9062AA_GPIO1_TYPE_MASK BIT(6) +#define DA9062AA_GPIO1_WEN_SHIFT 7 +#define DA9062AA_GPIO1_WEN_MASK BIT(7) + +/* DA9062AA_GPIO_2_3 = 0x016 */ +#define DA9062AA_GPIO2_PIN_SHIFT 0 +#define DA9062AA_GPIO2_PIN_MASK 0x03 +#define DA9062AA_GPIO2_TYPE_SHIFT 2 +#define DA9062AA_GPIO2_TYPE_MASK BIT(2) +#define DA9062AA_GPIO2_WEN_SHIFT 3 +#define DA9062AA_GPIO2_WEN_MASK BIT(3) +#define DA9062AA_GPIO3_PIN_SHIFT 4 +#define DA9062AA_GPIO3_PIN_MASK (0x03 << 4) +#define DA9062AA_GPIO3_TYPE_SHIFT 6 +#define DA9062AA_GPIO3_TYPE_MASK BIT(6) +#define DA9062AA_GPIO3_WEN_SHIFT 7 +#define DA9062AA_GPIO3_WEN_MASK BIT(7) + +/* DA9062AA_GPIO_4 = 0x017 */ +#define DA9062AA_GPIO4_PIN_SHIFT 0 +#define DA9062AA_GPIO4_PIN_MASK 0x03 +#define DA9062AA_GPIO4_TYPE_SHIFT 2 +#define DA9062AA_GPIO4_TYPE_MASK BIT(2) +#define DA9062AA_GPIO4_WEN_SHIFT 3 +#define DA9062AA_GPIO4_WEN_MASK BIT(3) + +/* DA9062AA_GPIO_WKUP_MODE = 0x01C */ +#define DA9062AA_GPIO0_WKUP_MODE_SHIFT 0 +#define DA9062AA_GPIO0_WKUP_MODE_MASK 0x01 +#define DA9062AA_GPIO1_WKUP_MODE_SHIFT 1 +#define DA9062AA_GPIO1_WKUP_MODE_MASK BIT(1) +#define DA9062AA_GPIO2_WKUP_MODE_SHIFT 2 +#define DA9062AA_GPIO2_WKUP_MODE_MASK BIT(2) +#define DA9062AA_GPIO3_WKUP_MODE_SHIFT 3 +#define DA9062AA_GPIO3_WKUP_MODE_MASK BIT(3) +#define DA9062AA_GPIO4_WKUP_MODE_SHIFT 4 +#define DA9062AA_GPIO4_WKUP_MODE_MASK BIT(4) + +/* DA9062AA_GPIO_MODE0_4 = 0x01D */ +#define DA9062AA_GPIO0_MODE_SHIFT 0 +#define DA9062AA_GPIO0_MODE_MASK 0x01 +#define DA9062AA_GPIO1_MODE_SHIFT 1 +#define DA9062AA_GPIO1_MODE_MASK BIT(1) +#define DA9062AA_GPIO2_MODE_SHIFT 2 +#define DA9062AA_GPIO2_MODE_MASK BIT(2) +#define DA9062AA_GPIO3_MODE_SHIFT 3 +#define DA9062AA_GPIO3_MODE_MASK BIT(3) +#define DA9062AA_GPIO4_MODE_SHIFT 4 +#define DA9062AA_GPIO4_MODE_MASK BIT(4) + +/* DA9062AA_GPIO_OUT0_2 = 0x01E */ +#define DA9062AA_GPIO0_OUT_SHIFT 0 +#define DA9062AA_GPIO0_OUT_MASK 0x07 +#define DA9062AA_GPIO1_OUT_SHIFT 3 +#define DA9062AA_GPIO1_OUT_MASK (0x07 << 3) +#define DA9062AA_GPIO2_OUT_SHIFT 6 +#define DA9062AA_GPIO2_OUT_MASK (0x03 << 6) + +/* DA9062AA_GPIO_OUT3_4 = 0x01F */ +#define DA9062AA_GPIO3_OUT_SHIFT 0 +#define DA9062AA_GPIO3_OUT_MASK 0x07 +#define DA9062AA_GPIO4_OUT_SHIFT 3 +#define DA9062AA_GPIO4_OUT_MASK (0x03 << 3) + +/* DA9062AA_BUCK2_CONT = 0x020 */ +#define DA9062AA_BUCK2_EN_SHIFT 0 +#define DA9062AA_BUCK2_EN_MASK 0x01 +#define DA9062AA_BUCK2_GPI_SHIFT 1 +#define DA9062AA_BUCK2_GPI_MASK (0x03 << 1) +#define DA9062AA_BUCK2_CONF_SHIFT 3 +#define DA9062AA_BUCK2_CONF_MASK BIT(3) +#define DA9062AA_VBUCK2_GPI_SHIFT 5 +#define DA9062AA_VBUCK2_GPI_MASK (0x03 << 5) + +/* DA9062AA_BUCK1_CONT = 0x021 */ +#define DA9062AA_BUCK1_EN_SHIFT 0 +#define DA9062AA_BUCK1_EN_MASK 0x01 +#define DA9062AA_BUCK1_GPI_SHIFT 1 +#define DA9062AA_BUCK1_GPI_MASK (0x03 << 1) +#define DA9062AA_BUCK1_CONF_SHIFT 3 +#define DA9062AA_BUCK1_CONF_MASK BIT(3) +#define DA9062AA_VBUCK1_GPI_SHIFT 5 +#define DA9062AA_VBUCK1_GPI_MASK (0x03 << 5) + +/* DA9062AA_BUCK4_CONT = 0x022 */ +#define DA9062AA_BUCK4_EN_SHIFT 0 +#define DA9062AA_BUCK4_EN_MASK 0x01 +#define DA9062AA_BUCK4_GPI_SHIFT 1 +#define DA9062AA_BUCK4_GPI_MASK (0x03 << 1) +#define DA9062AA_BUCK4_CONF_SHIFT 3 +#define DA9062AA_BUCK4_CONF_MASK BIT(3) +#define DA9062AA_VBUCK4_GPI_SHIFT 5 +#define DA9062AA_VBUCK4_GPI_MASK (0x03 << 5) + +/* DA9062AA_BUCK3_CONT = 0x024 */ +#define DA9062AA_BUCK3_EN_SHIFT 0 +#define DA9062AA_BUCK3_EN_MASK 0x01 +#define DA9062AA_BUCK3_GPI_SHIFT 1 +#define DA9062AA_BUCK3_GPI_MASK (0x03 << 1) +#define DA9062AA_BUCK3_CONF_SHIFT 3 +#define DA9062AA_BUCK3_CONF_MASK BIT(3) +#define DA9062AA_VBUCK3_GPI_SHIFT 5 +#define DA9062AA_VBUCK3_GPI_MASK (0x03 << 5) + +/* DA9062AA_LDO1_CONT = 0x026 */ +#define DA9062AA_LDO1_EN_SHIFT 0 +#define DA9062AA_LDO1_EN_MASK 0x01 +#define DA9062AA_LDO1_GPI_SHIFT 1 +#define DA9062AA_LDO1_GPI_MASK (0x03 << 1) +#define DA9062AA_LDO1_PD_DIS_SHIFT 3 +#define DA9062AA_LDO1_PD_DIS_MASK BIT(3) +#define DA9062AA_VLDO1_GPI_SHIFT 5 +#define DA9062AA_VLDO1_GPI_MASK (0x03 << 5) +#define DA9062AA_LDO1_CONF_SHIFT 7 +#define DA9062AA_LDO1_CONF_MASK BIT(7) + +/* DA9062AA_LDO2_CONT = 0x027 */ +#define DA9062AA_LDO2_EN_SHIFT 0 +#define DA9062AA_LDO2_EN_MASK 0x01 +#define DA9062AA_LDO2_GPI_SHIFT 1 +#define DA9062AA_LDO2_GPI_MASK (0x03 << 1) +#define DA9062AA_LDO2_PD_DIS_SHIFT 3 +#define DA9062AA_LDO2_PD_DIS_MASK BIT(3) +#define DA9062AA_VLDO2_GPI_SHIFT 5 +#define DA9062AA_VLDO2_GPI_MASK (0x03 << 5) +#define DA9062AA_LDO2_CONF_SHIFT 7 +#define DA9062AA_LDO2_CONF_MASK BIT(7) + +/* DA9062AA_LDO3_CONT = 0x028 */ +#define DA9062AA_LDO3_EN_SHIFT 0 +#define DA9062AA_LDO3_EN_MASK 0x01 +#define DA9062AA_LDO3_GPI_SHIFT 1 +#define DA9062AA_LDO3_GPI_MASK (0x03 << 1) +#define DA9062AA_LDO3_PD_DIS_SHIFT 3 +#define DA9062AA_LDO3_PD_DIS_MASK BIT(3) +#define DA9062AA_VLDO3_GPI_SHIFT 5 +#define DA9062AA_VLDO3_GPI_MASK (0x03 << 5) +#define DA9062AA_LDO3_CONF_SHIFT 7 +#define DA9062AA_LDO3_CONF_MASK BIT(7) + +/* DA9062AA_LDO4_CONT = 0x029 */ +#define DA9062AA_LDO4_EN_SHIFT 0 +#define DA9062AA_LDO4_EN_MASK 0x01 +#define DA9062AA_LDO4_GPI_SHIFT 1 +#define DA9062AA_LDO4_GPI_MASK (0x03 << 1) +#define DA9062AA_LDO4_PD_DIS_SHIFT 3 +#define DA9062AA_LDO4_PD_DIS_MASK BIT(3) +#define DA9062AA_VLDO4_GPI_SHIFT 5 +#define DA9062AA_VLDO4_GPI_MASK (0x03 << 5) +#define DA9062AA_LDO4_CONF_SHIFT 7 +#define DA9062AA_LDO4_CONF_MASK BIT(7) + +/* DA9062AA_DVC_1 = 0x032 */ +#define DA9062AA_VBUCK1_SEL_SHIFT 0 +#define DA9062AA_VBUCK1_SEL_MASK 0x01 +#define DA9062AA_VBUCK2_SEL_SHIFT 1 +#define DA9062AA_VBUCK2_SEL_MASK BIT(1) +#define DA9062AA_VBUCK4_SEL_SHIFT 2 +#define DA9062AA_VBUCK4_SEL_MASK BIT(2) +#define DA9062AA_VBUCK3_SEL_SHIFT 3 +#define DA9062AA_VBUCK3_SEL_MASK BIT(3) +#define DA9062AA_VLDO1_SEL_SHIFT 4 +#define DA9062AA_VLDO1_SEL_MASK BIT(4) +#define DA9062AA_VLDO2_SEL_SHIFT 5 +#define DA9062AA_VLDO2_SEL_MASK BIT(5) +#define DA9062AA_VLDO3_SEL_SHIFT 6 +#define DA9062AA_VLDO3_SEL_MASK BIT(6) +#define DA9062AA_VLDO4_SEL_SHIFT 7 +#define DA9062AA_VLDO4_SEL_MASK BIT(7) + +/* DA9062AA_COUNT_S = 0x040 */ +#define DA9062AA_COUNT_SEC_SHIFT 0 +#define DA9062AA_COUNT_SEC_MASK 0x3f +#define DA9062AA_RTC_READ_SHIFT 7 +#define DA9062AA_RTC_READ_MASK BIT(7) + +/* DA9062AA_COUNT_MI = 0x041 */ +#define DA9062AA_COUNT_MIN_SHIFT 0 +#define DA9062AA_COUNT_MIN_MASK 0x3f + +/* DA9062AA_COUNT_H = 0x042 */ +#define DA9062AA_COUNT_HOUR_SHIFT 0 +#define DA9062AA_COUNT_HOUR_MASK 0x1f + +/* DA9062AA_COUNT_D = 0x043 */ +#define DA9062AA_COUNT_DAY_SHIFT 0 +#define DA9062AA_COUNT_DAY_MASK 0x1f + +/* DA9062AA_COUNT_MO = 0x044 */ +#define DA9062AA_COUNT_MONTH_SHIFT 0 +#define DA9062AA_COUNT_MONTH_MASK 0x0f + +/* DA9062AA_COUNT_Y = 0x045 */ +#define DA9062AA_COUNT_YEAR_SHIFT 0 +#define DA9062AA_COUNT_YEAR_MASK 0x3f +#define DA9062AA_MONITOR_SHIFT 6 +#define DA9062AA_MONITOR_MASK BIT(6) + +/* DA9062AA_ALARM_S = 0x046 */ +#define DA9062AA_ALARM_SEC_SHIFT 0 +#define DA9062AA_ALARM_SEC_MASK 0x3f +#define DA9062AA_ALARM_STATUS_SHIFT 6 +#define DA9062AA_ALARM_STATUS_MASK (0x03 << 6) + +/* DA9062AA_ALARM_MI = 0x047 */ +#define DA9062AA_ALARM_MIN_SHIFT 0 +#define DA9062AA_ALARM_MIN_MASK 0x3f + +/* DA9062AA_ALARM_H = 0x048 */ +#define DA9062AA_ALARM_HOUR_SHIFT 0 +#define DA9062AA_ALARM_HOUR_MASK 0x1f + +/* DA9062AA_ALARM_D = 0x049 */ +#define DA9062AA_ALARM_DAY_SHIFT 0 +#define DA9062AA_ALARM_DAY_MASK 0x1f + +/* DA9062AA_ALARM_MO = 0x04A */ +#define DA9062AA_ALARM_MONTH_SHIFT 0 +#define DA9062AA_ALARM_MONTH_MASK 0x0f +#define DA9062AA_TICK_TYPE_SHIFT 4 +#define DA9062AA_TICK_TYPE_MASK BIT(4) +#define DA9062AA_TICK_WAKE_SHIFT 5 +#define DA9062AA_TICK_WAKE_MASK BIT(5) + +/* DA9062AA_ALARM_Y = 0x04B */ +#define DA9062AA_ALARM_YEAR_SHIFT 0 +#define DA9062AA_ALARM_YEAR_MASK 0x3f +#define DA9062AA_ALARM_ON_SHIFT 6 +#define DA9062AA_ALARM_ON_MASK BIT(6) +#define DA9062AA_TICK_ON_SHIFT 7 +#define DA9062AA_TICK_ON_MASK BIT(7) + +/* DA9062AA_SECOND_A = 0x04C */ +#define DA9062AA_SECONDS_A_SHIFT 0 +#define DA9062AA_SECONDS_A_MASK 0xff + +/* DA9062AA_SECOND_B = 0x04D */ +#define DA9062AA_SECONDS_B_SHIFT 0 +#define DA9062AA_SECONDS_B_MASK 0xff + +/* DA9062AA_SECOND_C = 0x04E */ +#define DA9062AA_SECONDS_C_SHIFT 0 +#define DA9062AA_SECONDS_C_MASK 0xff + +/* DA9062AA_SECOND_D = 0x04F */ +#define DA9062AA_SECONDS_D_SHIFT 0 +#define DA9062AA_SECONDS_D_MASK 0xff + +/* DA9062AA_SEQ = 0x081 */ +#define DA9062AA_SEQ_POINTER_SHIFT 0 +#define DA9062AA_SEQ_POINTER_MASK 0x0f +#define DA9062AA_NXT_SEQ_START_SHIFT 4 +#define DA9062AA_NXT_SEQ_START_MASK (0x0f << 4) + +/* DA9062AA_SEQ_TIMER = 0x082 */ +#define DA9062AA_SEQ_TIME_SHIFT 0 +#define DA9062AA_SEQ_TIME_MASK 0x0f +#define DA9062AA_SEQ_DUMMY_SHIFT 4 +#define DA9062AA_SEQ_DUMMY_MASK (0x0f << 4) + +/* DA9062AA_ID_2_1 = 0x083 */ +#define DA9062AA_LDO1_STEP_SHIFT 0 +#define DA9062AA_LDO1_STEP_MASK 0x0f +#define DA9062AA_LDO2_STEP_SHIFT 4 +#define DA9062AA_LDO2_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_4_3 = 0x084 */ +#define DA9062AA_LDO3_STEP_SHIFT 0 +#define DA9062AA_LDO3_STEP_MASK 0x0f +#define DA9062AA_LDO4_STEP_SHIFT 4 +#define DA9062AA_LDO4_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_12_11 = 0x088 */ +#define DA9062AA_PD_DIS_STEP_SHIFT 4 +#define DA9062AA_PD_DIS_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_14_13 = 0x089 */ +#define DA9062AA_BUCK1_STEP_SHIFT 0 +#define DA9062AA_BUCK1_STEP_MASK 0x0f +#define DA9062AA_BUCK2_STEP_SHIFT 4 +#define DA9062AA_BUCK2_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_16_15 = 0x08A */ +#define DA9062AA_BUCK4_STEP_SHIFT 0 +#define DA9062AA_BUCK4_STEP_MASK 0x0f +#define DA9062AA_BUCK3_STEP_SHIFT 4 +#define DA9062AA_BUCK3_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_22_21 = 0x08D */ +#define DA9062AA_GP_RISE1_STEP_SHIFT 0 +#define DA9062AA_GP_RISE1_STEP_MASK 0x0f +#define DA9062AA_GP_FALL1_STEP_SHIFT 4 +#define DA9062AA_GP_FALL1_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_24_23 = 0x08E */ +#define DA9062AA_GP_RISE2_STEP_SHIFT 0 +#define DA9062AA_GP_RISE2_STEP_MASK 0x0f +#define DA9062AA_GP_FALL2_STEP_SHIFT 4 +#define DA9062AA_GP_FALL2_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_26_25 = 0x08F */ +#define DA9062AA_GP_RISE3_STEP_SHIFT 0 +#define DA9062AA_GP_RISE3_STEP_MASK 0x0f +#define DA9062AA_GP_FALL3_STEP_SHIFT 4 +#define DA9062AA_GP_FALL3_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_28_27 = 0x090 */ +#define DA9062AA_GP_RISE4_STEP_SHIFT 0 +#define DA9062AA_GP_RISE4_STEP_MASK 0x0f +#define DA9062AA_GP_FALL4_STEP_SHIFT 4 +#define DA9062AA_GP_FALL4_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_30_29 = 0x091 */ +#define DA9062AA_GP_RISE5_STEP_SHIFT 0 +#define DA9062AA_GP_RISE5_STEP_MASK 0x0f +#define DA9062AA_GP_FALL5_STEP_SHIFT 4 +#define DA9062AA_GP_FALL5_STEP_MASK (0x0f << 4) + +/* DA9062AA_ID_32_31 = 0x092 */ +#define DA9062AA_WAIT_STEP_SHIFT 0 +#define DA9062AA_WAIT_STEP_MASK 0x0f +#define DA9062AA_EN32K_STEP_SHIFT 4 +#define DA9062AA_EN32K_STEP_MASK (0x0f << 4) + +/* DA9062AA_SEQ_A = 0x095 */ +#define DA9062AA_SYSTEM_END_SHIFT 0 +#define DA9062AA_SYSTEM_END_MASK 0x0f +#define DA9062AA_POWER_END_SHIFT 4 +#define DA9062AA_POWER_END_MASK (0x0f << 4) + +/* DA9062AA_SEQ_B = 0x096 */ +#define DA9062AA_MAX_COUNT_SHIFT 0 +#define DA9062AA_MAX_COUNT_MASK 0x0f +#define DA9062AA_PART_DOWN_SHIFT 4 +#define DA9062AA_PART_DOWN_MASK (0x0f << 4) + +/* DA9062AA_WAIT = 0x097 */ +#define DA9062AA_WAIT_TIME_SHIFT 0 +#define DA9062AA_WAIT_TIME_MASK 0x0f +#define DA9062AA_WAIT_MODE_SHIFT 4 +#define DA9062AA_WAIT_MODE_MASK BIT(4) +#define DA9062AA_TIME_OUT_SHIFT 5 +#define DA9062AA_TIME_OUT_MASK BIT(5) +#define DA9062AA_WAIT_DIR_SHIFT 6 +#define DA9062AA_WAIT_DIR_MASK (0x03 << 6) + +/* DA9062AA_EN_32K = 0x098 */ +#define DA9062AA_STABILISATION_TIME_SHIFT 0 +#define DA9062AA_STABILISATION_TIME_MASK 0x07 +#define DA9062AA_CRYSTAL_SHIFT 3 +#define DA9062AA_CRYSTAL_MASK BIT(3) +#define DA9062AA_DELAY_MODE_SHIFT 4 +#define DA9062AA_DELAY_MODE_MASK BIT(4) +#define DA9062AA_OUT_CLOCK_SHIFT 5 +#define DA9062AA_OUT_CLOCK_MASK BIT(5) +#define DA9062AA_RTC_CLOCK_SHIFT 6 +#define DA9062AA_RTC_CLOCK_MASK BIT(6) +#define DA9062AA_EN_32KOUT_SHIFT 7 +#define DA9062AA_EN_32KOUT_MASK BIT(7) + +/* DA9062AA_RESET = 0x099 */ +#define DA9062AA_RESET_TIMER_SHIFT 0 +#define DA9062AA_RESET_TIMER_MASK 0x3f +#define DA9062AA_RESET_EVENT_SHIFT 6 +#define DA9062AA_RESET_EVENT_MASK (0x03 << 6) + +/* DA9062AA_BUCK_ILIM_A = 0x09A */ +#define DA9062AA_BUCK3_ILIM_SHIFT 0 +#define DA9062AA_BUCK3_ILIM_MASK 0x0f + +/* DA9062AA_BUCK_ILIM_B = 0x09B */ +#define DA9062AA_BUCK4_ILIM_SHIFT 0 +#define DA9062AA_BUCK4_ILIM_MASK 0x0f + +/* DA9062AA_BUCK_ILIM_C = 0x09C */ +#define DA9062AA_BUCK1_ILIM_SHIFT 0 +#define DA9062AA_BUCK1_ILIM_MASK 0x0f +#define DA9062AA_BUCK2_ILIM_SHIFT 4 +#define DA9062AA_BUCK2_ILIM_MASK (0x0f << 4) + +/* DA9062AA_BUCK2_CFG = 0x09D */ +#define DA9062AA_BUCK2_PD_DIS_SHIFT 5 +#define DA9062AA_BUCK2_PD_DIS_MASK BIT(5) +#define DA9062AA_BUCK2_MODE_SHIFT 6 +#define DA9062AA_BUCK2_MODE_MASK (0x03 << 6) + +/* DA9062AA_BUCK1_CFG = 0x09E */ +#define DA9062AA_BUCK1_PD_DIS_SHIFT 5 +#define DA9062AA_BUCK1_PD_DIS_MASK BIT(5) +#define DA9062AA_BUCK1_MODE_SHIFT 6 +#define DA9062AA_BUCK1_MODE_MASK (0x03 << 6) + +/* DA9062AA_BUCK4_CFG = 0x09F */ +#define DA9062AA_BUCK4_VTTR_EN_SHIFT 3 +#define DA9062AA_BUCK4_VTTR_EN_MASK BIT(3) +#define DA9062AA_BUCK4_VTT_EN_SHIFT 4 +#define DA9062AA_BUCK4_VTT_EN_MASK BIT(4) +#define DA9062AA_BUCK4_PD_DIS_SHIFT 5 +#define DA9062AA_BUCK4_PD_DIS_MASK BIT(5) +#define DA9062AA_BUCK4_MODE_SHIFT 6 +#define DA9062AA_BUCK4_MODE_MASK (0x03 << 6) + +/* DA9062AA_BUCK3_CFG = 0x0A0 */ +#define DA9062AA_BUCK3_PD_DIS_SHIFT 5 +#define DA9062AA_BUCK3_PD_DIS_MASK BIT(5) +#define DA9062AA_BUCK3_MODE_SHIFT 6 +#define DA9062AA_BUCK3_MODE_MASK (0x03 << 6) + +/* DA9062AA_VBUCK2_A = 0x0A3 */ +#define DA9062AA_VBUCK2_A_SHIFT 0 +#define DA9062AA_VBUCK2_A_MASK 0x7f +#define DA9062AA_BUCK2_SL_A_SHIFT 7 +#define DA9062AA_BUCK2_SL_A_MASK BIT(7) + +/* DA9062AA_VBUCK1_A = 0x0A4 */ +#define DA9062AA_VBUCK1_A_SHIFT 0 +#define DA9062AA_VBUCK1_A_MASK 0x7f +#define DA9062AA_BUCK1_SL_A_SHIFT 7 +#define DA9062AA_BUCK1_SL_A_MASK BIT(7) + +/* DA9062AA_VBUCK4_A = 0x0A5 */ +#define DA9062AA_VBUCK4_A_SHIFT 0 +#define DA9062AA_VBUCK4_A_MASK 0x7f +#define DA9062AA_BUCK4_SL_A_SHIFT 7 +#define DA9062AA_BUCK4_SL_A_MASK BIT(7) + +/* DA9062AA_VBUCK3_A = 0x0A7 */ +#define DA9062AA_VBUCK3_A_SHIFT 0 +#define DA9062AA_VBUCK3_A_MASK 0x7f +#define DA9062AA_BUCK3_SL_A_SHIFT 7 +#define DA9062AA_BUCK3_SL_A_MASK BIT(7) + +/* DA9062AA_VLDO1_A = 0x0A9 */ +#define DA9062AA_VLDO1_A_SHIFT 0 +#define DA9062AA_VLDO1_A_MASK 0x3f +#define DA9062AA_LDO1_SL_A_SHIFT 7 +#define DA9062AA_LDO1_SL_A_MASK BIT(7) + +/* DA9062AA_VLDO2_A = 0x0AA */ +#define DA9062AA_VLDO2_A_SHIFT 0 +#define DA9062AA_VLDO2_A_MASK 0x3f +#define DA9062AA_LDO2_SL_A_SHIFT 7 +#define DA9062AA_LDO2_SL_A_MASK BIT(7) + +/* DA9062AA_VLDO3_A = 0x0AB */ +#define DA9062AA_VLDO3_A_SHIFT 0 +#define DA9062AA_VLDO3_A_MASK 0x3f +#define DA9062AA_LDO3_SL_A_SHIFT 7 +#define DA9062AA_LDO3_SL_A_MASK BIT(7) + +/* DA9062AA_VLDO4_A = 0x0AC */ +#define DA9062AA_VLDO4_A_SHIFT 0 +#define DA9062AA_VLDO4_A_MASK 0x3f +#define DA9062AA_LDO4_SL_A_SHIFT 7 +#define DA9062AA_LDO4_SL_A_MASK BIT(7) + +/* DA9062AA_VBUCK2_B = 0x0B4 */ +#define DA9062AA_VBUCK2_B_SHIFT 0 +#define DA9062AA_VBUCK2_B_MASK 0x7f +#define DA9062AA_BUCK2_SL_B_SHIFT 7 +#define DA9062AA_BUCK2_SL_B_MASK BIT(7) + +/* DA9062AA_VBUCK1_B = 0x0B5 */ +#define DA9062AA_VBUCK1_B_SHIFT 0 +#define DA9062AA_VBUCK1_B_MASK 0x7f +#define DA9062AA_BUCK1_SL_B_SHIFT 7 +#define DA9062AA_BUCK1_SL_B_MASK BIT(7) + +/* DA9062AA_VBUCK4_B = 0x0B6 */ +#define DA9062AA_VBUCK4_B_SHIFT 0 +#define DA9062AA_VBUCK4_B_MASK 0x7f +#define DA9062AA_BUCK4_SL_B_SHIFT 7 +#define DA9062AA_BUCK4_SL_B_MASK BIT(7) + +/* DA9062AA_VBUCK3_B = 0x0B8 */ +#define DA9062AA_VBUCK3_B_SHIFT 0 +#define DA9062AA_VBUCK3_B_MASK 0x7f +#define DA9062AA_BUCK3_SL_B_SHIFT 7 +#define DA9062AA_BUCK3_SL_B_MASK BIT(7) + +/* DA9062AA_VLDO1_B = 0x0BA */ +#define DA9062AA_VLDO1_B_SHIFT 0 +#define DA9062AA_VLDO1_B_MASK 0x3f +#define DA9062AA_LDO1_SL_B_SHIFT 7 +#define DA9062AA_LDO1_SL_B_MASK BIT(7) + +/* DA9062AA_VLDO2_B = 0x0BB */ +#define DA9062AA_VLDO2_B_SHIFT 0 +#define DA9062AA_VLDO2_B_MASK 0x3f +#define DA9062AA_LDO2_SL_B_SHIFT 7 +#define DA9062AA_LDO2_SL_B_MASK BIT(7) + +/* DA9062AA_VLDO3_B = 0x0BC */ +#define DA9062AA_VLDO3_B_SHIFT 0 +#define DA9062AA_VLDO3_B_MASK 0x3f +#define DA9062AA_LDO3_SL_B_SHIFT 7 +#define DA9062AA_LDO3_SL_B_MASK BIT(7) + +/* DA9062AA_VLDO4_B = 0x0BD */ +#define DA9062AA_VLDO4_B_SHIFT 0 +#define DA9062AA_VLDO4_B_MASK 0x3f +#define DA9062AA_LDO4_SL_B_SHIFT 7 +#define DA9062AA_LDO4_SL_B_MASK BIT(7) + +/* DA9062AA_BBAT_CONT = 0x0C5 */ +#define DA9062AA_BCHG_VSET_SHIFT 0 +#define DA9062AA_BCHG_VSET_MASK 0x0f +#define DA9062AA_BCHG_ISET_SHIFT 4 +#define DA9062AA_BCHG_ISET_MASK (0x0f << 4) + +/* DA9062AA_INTERFACE = 0x105 */ +#define DA9062AA_IF_BASE_ADDR_SHIFT 4 +#define DA9062AA_IF_BASE_ADDR_MASK (0x0f << 4) + +/* DA9062AA_CONFIG_A = 0x106 */ +#define DA9062AA_PM_I_V_SHIFT 0 +#define DA9062AA_PM_I_V_MASK 0x01 +#define DA9062AA_PM_O_TYPE_SHIFT 2 +#define DA9062AA_PM_O_TYPE_MASK BIT(2) +#define DA9062AA_IRQ_TYPE_SHIFT 3 +#define DA9062AA_IRQ_TYPE_MASK BIT(3) +#define DA9062AA_PM_IF_V_SHIFT 4 +#define DA9062AA_PM_IF_V_MASK BIT(4) +#define DA9062AA_PM_IF_FMP_SHIFT 5 +#define DA9062AA_PM_IF_FMP_MASK BIT(5) +#define DA9062AA_PM_IF_HSM_SHIFT 6 +#define DA9062AA_PM_IF_HSM_MASK BIT(6) + +/* DA9062AA_CONFIG_B = 0x107 */ +#define DA9062AA_VDD_FAULT_ADJ_SHIFT 0 +#define DA9062AA_VDD_FAULT_ADJ_MASK 0x0f +#define DA9062AA_VDD_HYST_ADJ_SHIFT 4 +#define DA9062AA_VDD_HYST_ADJ_MASK (0x07 << 4) + +/* DA9062AA_CONFIG_C = 0x108 */ +#define DA9062AA_BUCK_ACTV_DISCHRG_SHIFT 2 +#define DA9062AA_BUCK_ACTV_DISCHRG_MASK BIT(2) +#define DA9062AA_BUCK1_CLK_INV_SHIFT 3 +#define DA9062AA_BUCK1_CLK_INV_MASK BIT(3) +#define DA9062AA_BUCK4_CLK_INV_SHIFT 4 +#define DA9062AA_BUCK4_CLK_INV_MASK BIT(4) +#define DA9062AA_BUCK3_CLK_INV_SHIFT 6 +#define DA9062AA_BUCK3_CLK_INV_MASK BIT(6) + +/* DA9062AA_CONFIG_D = 0x109 */ +#define DA9062AA_GPI_V_SHIFT 0 +#define DA9062AA_GPI_V_MASK 0x01 +#define DA9062AA_NIRQ_MODE_SHIFT 1 +#define DA9062AA_NIRQ_MODE_MASK BIT(1) +#define DA9062AA_SYSTEM_EN_RD_SHIFT 2 +#define DA9062AA_SYSTEM_EN_RD_MASK BIT(2) +#define DA9062AA_FORCE_RESET_SHIFT 5 +#define DA9062AA_FORCE_RESET_MASK BIT(5) + +/* DA9062AA_CONFIG_E = 0x10A */ +#define DA9062AA_BUCK1_AUTO_SHIFT 0 +#define DA9062AA_BUCK1_AUTO_MASK 0x01 +#define DA9062AA_BUCK2_AUTO_SHIFT 1 +#define DA9062AA_BUCK2_AUTO_MASK BIT(1) +#define DA9062AA_BUCK4_AUTO_SHIFT 2 +#define DA9062AA_BUCK4_AUTO_MASK BIT(2) +#define DA9062AA_BUCK3_AUTO_SHIFT 4 +#define DA9062AA_BUCK3_AUTO_MASK BIT(4) + +/* DA9062AA_CONFIG_G = 0x10C */ +#define DA9062AA_LDO1_AUTO_SHIFT 0 +#define DA9062AA_LDO1_AUTO_MASK 0x01 +#define DA9062AA_LDO2_AUTO_SHIFT 1 +#define DA9062AA_LDO2_AUTO_MASK BIT(1) +#define DA9062AA_LDO3_AUTO_SHIFT 2 +#define DA9062AA_LDO3_AUTO_MASK BIT(2) +#define DA9062AA_LDO4_AUTO_SHIFT 3 +#define DA9062AA_LDO4_AUTO_MASK BIT(3) + +/* DA9062AA_CONFIG_H = 0x10D */ +#define DA9062AA_BUCK1_2_MERGE_SHIFT 3 +#define DA9062AA_BUCK1_2_MERGE_MASK BIT(3) +#define DA9062AA_BUCK2_OD_SHIFT 5 +#define DA9062AA_BUCK2_OD_MASK BIT(5) +#define DA9062AA_BUCK1_OD_SHIFT 6 +#define DA9062AA_BUCK1_OD_MASK BIT(6) + +/* DA9062AA_CONFIG_I = 0x10E */ +#define DA9062AA_NONKEY_PIN_SHIFT 0 +#define DA9062AA_NONKEY_PIN_MASK 0x03 +#define DA9062AA_nONKEY_SD_SHIFT 2 +#define DA9062AA_nONKEY_SD_MASK BIT(2) +#define DA9062AA_WATCHDOG_SD_SHIFT 3 +#define DA9062AA_WATCHDOG_SD_MASK BIT(3) +#define DA9062AA_KEY_SD_MODE_SHIFT 4 +#define DA9062AA_KEY_SD_MODE_MASK BIT(4) +#define DA9062AA_HOST_SD_MODE_SHIFT 5 +#define DA9062AA_HOST_SD_MODE_MASK BIT(5) +#define DA9062AA_INT_SD_MODE_SHIFT 6 +#define DA9062AA_INT_SD_MODE_MASK BIT(6) +#define DA9062AA_LDO_SD_SHIFT 7 +#define DA9062AA_LDO_SD_MASK BIT(7) + +/* DA9062AA_CONFIG_J = 0x10F */ +#define DA9062AA_KEY_DELAY_SHIFT 0 +#define DA9062AA_KEY_DELAY_MASK 0x03 +#define DA9062AA_SHUT_DELAY_SHIFT 2 +#define DA9062AA_SHUT_DELAY_MASK (0x03 << 2) +#define DA9062AA_RESET_DURATION_SHIFT 4 +#define DA9062AA_RESET_DURATION_MASK (0x03 << 4) +#define DA9062AA_TWOWIRE_TO_SHIFT 6 +#define DA9062AA_TWOWIRE_TO_MASK BIT(6) +#define DA9062AA_IF_RESET_SHIFT 7 +#define DA9062AA_IF_RESET_MASK BIT(7) + +/* DA9062AA_CONFIG_K = 0x110 */ +#define DA9062AA_GPIO0_PUPD_SHIFT 0 +#define DA9062AA_GPIO0_PUPD_MASK 0x01 +#define DA9062AA_GPIO1_PUPD_SHIFT 1 +#define DA9062AA_GPIO1_PUPD_MASK BIT(1) +#define DA9062AA_GPIO2_PUPD_SHIFT 2 +#define DA9062AA_GPIO2_PUPD_MASK BIT(2) +#define DA9062AA_GPIO3_PUPD_SHIFT 3 +#define DA9062AA_GPIO3_PUPD_MASK BIT(3) +#define DA9062AA_GPIO4_PUPD_SHIFT 4 +#define DA9062AA_GPIO4_PUPD_MASK BIT(4) + +/* DA9062AA_CONFIG_M = 0x112 */ +#define DA9062AA_NSHUTDOWN_PU_SHIFT 1 +#define DA9062AA_NSHUTDOWN_PU_MASK BIT(1) +#define DA9062AA_WDG_MODE_SHIFT 3 +#define DA9062AA_WDG_MODE_MASK BIT(3) +#define DA9062AA_OSC_FRQ_SHIFT 4 +#define DA9062AA_OSC_FRQ_MASK (0x0f << 4) + +/* DA9062AA_TRIM_CLDR = 0x120 */ +#define DA9062AA_TRIM_CLDR_SHIFT 0 +#define DA9062AA_TRIM_CLDR_MASK 0xff + +/* DA9062AA_GP_ID_0 = 0x121 */ +#define DA9062AA_GP_0_SHIFT 0 +#define DA9062AA_GP_0_MASK 0xff + +/* DA9062AA_GP_ID_1 = 0x122 */ +#define DA9062AA_GP_1_SHIFT 0 +#define DA9062AA_GP_1_MASK 0xff + +/* DA9062AA_GP_ID_2 = 0x123 */ +#define DA9062AA_GP_2_SHIFT 0 +#define DA9062AA_GP_2_MASK 0xff + +/* DA9062AA_GP_ID_3 = 0x124 */ +#define DA9062AA_GP_3_SHIFT 0 +#define DA9062AA_GP_3_MASK 0xff + +/* DA9062AA_GP_ID_4 = 0x125 */ +#define DA9062AA_GP_4_SHIFT 0 +#define DA9062AA_GP_4_MASK 0xff + +/* DA9062AA_GP_ID_5 = 0x126 */ +#define DA9062AA_GP_5_SHIFT 0 +#define DA9062AA_GP_5_MASK 0xff + +/* DA9062AA_GP_ID_6 = 0x127 */ +#define DA9062AA_GP_6_SHIFT 0 +#define DA9062AA_GP_6_MASK 0xff + +/* DA9062AA_GP_ID_7 = 0x128 */ +#define DA9062AA_GP_7_SHIFT 0 +#define DA9062AA_GP_7_MASK 0xff + +/* DA9062AA_GP_ID_8 = 0x129 */ +#define DA9062AA_GP_8_SHIFT 0 +#define DA9062AA_GP_8_MASK 0xff + +/* DA9062AA_GP_ID_9 = 0x12A */ +#define DA9062AA_GP_9_SHIFT 0 +#define DA9062AA_GP_9_MASK 0xff + +/* DA9062AA_GP_ID_10 = 0x12B */ +#define DA9062AA_GP_10_SHIFT 0 +#define DA9062AA_GP_10_MASK 0xff + +/* DA9062AA_GP_ID_11 = 0x12C */ +#define DA9062AA_GP_11_SHIFT 0 +#define DA9062AA_GP_11_MASK 0xff + +/* DA9062AA_GP_ID_12 = 0x12D */ +#define DA9062AA_GP_12_SHIFT 0 +#define DA9062AA_GP_12_MASK 0xff + +/* DA9062AA_GP_ID_13 = 0x12E */ +#define DA9062AA_GP_13_SHIFT 0 +#define DA9062AA_GP_13_MASK 0xff + +/* DA9062AA_GP_ID_14 = 0x12F */ +#define DA9062AA_GP_14_SHIFT 0 +#define DA9062AA_GP_14_MASK 0xff + +/* DA9062AA_GP_ID_15 = 0x130 */ +#define DA9062AA_GP_15_SHIFT 0 +#define DA9062AA_GP_15_MASK 0xff + +/* DA9062AA_GP_ID_16 = 0x131 */ +#define DA9062AA_GP_16_SHIFT 0 +#define DA9062AA_GP_16_MASK 0xff + +/* DA9062AA_GP_ID_17 = 0x132 */ +#define DA9062AA_GP_17_SHIFT 0 +#define DA9062AA_GP_17_MASK 0xff + +/* DA9062AA_GP_ID_18 = 0x133 */ +#define DA9062AA_GP_18_SHIFT 0 +#define DA9062AA_GP_18_MASK 0xff + +/* DA9062AA_GP_ID_19 = 0x134 */ +#define DA9062AA_GP_19_SHIFT 0 +#define DA9062AA_GP_19_MASK 0xff + +/* DA9062AA_DEVICE_ID = 0x181 */ +#define DA9062AA_DEV_ID_SHIFT 0 +#define DA9062AA_DEV_ID_MASK 0xff + +/* DA9062AA_VARIANT_ID = 0x182 */ +#define DA9062AA_VRC_SHIFT 0 +#define DA9062AA_VRC_MASK 0x0f +#define DA9062AA_MRC_SHIFT 4 +#define DA9062AA_MRC_MASK (0x0f << 4) + +/* DA9062AA_CUSTOMER_ID = 0x183 */ +#define DA9062AA_CUST_ID_SHIFT 0 +#define DA9062AA_CUST_ID_MASK 0xff + +/* DA9062AA_CONFIG_ID = 0x184 */ +#define DA9062AA_CONFIG_REV_SHIFT 0 +#define DA9062AA_CONFIG_REV_MASK 0xff + +#endif /* __DA9062_H__ */
Signature · 8 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH V5 1/2] mfd: da9062: DA9062 MFD core driver
T24gMDcgSnVseSAyMDE1IDEyOjQyLCBMZWUgSm9uZXMgd3JvdGU6DQoNCj4gVG86IE9wZW5zb3Vy Y2UgW1N0ZXZlIFR3aXNzXQ0KPiBTdWJqZWN0OiBSZTogW1BBVENIIFY1IDEvMl0gbWZkOiBkYTkw NjI6IERBOTA2MiBNRkQgY29yZSBkcml2ZXINCj4gDQo+ID4gRnJvbTogUyBUd2lzcyA8c3R3aXNz Lm9wZW5zb3VyY2VAZGlhc2VtaS5jb20+DQo+ID4NCj4gPiBBZGQgTUZEIGNvcmUgZHJpdmVyIHN1 cHBvcnQgZm9yIERBOTA2Mg0KPiA+DQo+ID4gU2lnbmVkLW9mZi1ieTogU3RldmUgVHdpc3MgPHN0 d2lzcy5vcGVuc291cmNlQGRpYXNlbWkuY29tPg0KPiA+DQpbLi4uXQ0KPiANCj4gDQo+IEFwcGxp ZWQsIHRoYW5rcy4NCg0KDQpIaSBMZWUsDQpUaGFuayB5b3UgZm9yIHlvdXIgZWZmb3J0cyBvbiB0 aGlzLg0KUmVnYXJkcywNClN0ZXZlDQoNClsuLi5dDQo=
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v5 2/2 devicetree: da9062: Add bindings for DA9062 driver
In reply to S TwissFrom: S Twiss <[email protected]>
Add device tree bindings for the DA9062 driver
---
Changes in V5:
- No change
Changes in V4:
- No change
Changes in V3:
- No change
Changes in V2:
- Dropped the RTC and Onkey binding information in this patch-set Those drivers have been dropped from this patch set and the binding information has been removed accordingly.
This patch applies against linux-next and next-20150701
Documentation/devicetree/bindings/mfd/da9062.txt | 79 ++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt
Documentation/devicetree/bindings/mfd/da9062.txt new file +79 -0
@@ -0,0 +1,79 @@ +* Dialog DA9062 Power Management Integrated Circuit (PMIC) + +DA9062 consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +da9062-regulator : : LDOs & BUCKs +da9062-watchdog : : Watchdog Timer + +====== + +Required properties: + +- compatible : Should be "dlg,da9062". +- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be + modified to match the chip's OTP settings). +- interrupt-parent : Specifies the reference to the interrupt controller for + the DA9062. +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + +Sub-nodes: + +- regulators : This node defines the settings for the LDOs and BUCKs. The + DA9062 regulators are bound using their names listed below: + + buck1 : BUCK_1 + buck2 : BUCK_2 + buck3 : BUCK_3 + buck4 : BUCK_4 + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + + The component follows the standard regulator framework and the bindings + details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + +- watchdog: This node defines the settings for the watchdog driver associated + with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added + if a node is created. + + +Example: + + pmic0: da9062@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + + regulators { + DA9062_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + DA9062_LDO1: ldo1 { + regulator-name = "LDO_1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; +
Signature · 6 lines
end-of-patch for PATCH V5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Lee Jones
AppliedRe: [PATCH V5 2/2] devicetree: da9062: Add bindings for DA9062 driver
Quoted 21 lines · S Twiss
From: S Twiss <[email protected]>
Add device tree bindings for the DA9062 driver
Signed-off-by Steve Twiss <[email protected]>---
Changes in V5:
- No changeChanges in V4:
- No changeChanges in V3:
- No changeChanges in V2:
- Dropped the RTC and Onkey binding information in this patch-set Those drivers have been dropped from this patch set and the binding information has been removed accordingly.
Quoted 7 lines
This patch applies against linux-next and next-20150701
Documentation/devicetree/bindings/mfd/da9062.txt | 79 ++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt
Applied, thanks.
Quoted 85 lines
Documentation/devicetree/bindings/mfd/da9062.txt new file +79
-0@@ -0,0 +1,79 @@ +* Dialog DA9062 Power Management Integrated Circuit (PMIC) + +DA9062 consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +da9062-regulator : : LDOs & BUCKs +da9062-watchdog : : Watchdog Timer + +====== + +Required properties: + +- compatible : Should be "dlg,da9062". +- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be + modified to match the chip's OTP settings). +- interrupt-parent : Specifies the reference to the interrupt controller for + the DA9062. +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + +Sub-nodes: + +- regulators : This node defines the settings for the LDOs and BUCKs. The + DA9062 regulators are bound using their names listed below: + + buck1 : BUCK_1 + buck2 : BUCK_2 + buck3 : BUCK_3 + buck4 : BUCK_4 + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + + The component follows the standard regulator framework and the bindings + details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + +- watchdog: This node defines the settings for the watchdog driver associated + with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added + if a node is created. + + +Example: + + pmic0: da9062@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + + regulators { + DA9062_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + DA9062_LDO1: ldo1 { + regulator-name = "LDO_1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; +
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog