Skip to contentSkip to conversation

ASoC: wm8731: initialize the hardware when loading the codec driver

PATCH In review Sergey Kiselev 3 participants 6 messages Jun 5, 2015 – Jul 7, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ASoC: wm8731: initialize the hardware when loading the codec driver

From: Sergey Kiselev <[email protected]>

This patch moves the requesting supplies, hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe. So that the codec hardware is initialized when loading the codec driver, and not when loading the machine driver. This avoids unnecesary hardware resets and re-initializations when re-loading the machine driver.

---
 sound/soc/codecs/wm8731.c | 74 +++++++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 32 deletions(-)
sound/soc/codecs/wm8731.c +42 -32
index 915ea11..f22935a 100644
@@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev, unsigned int reg)
 	return reg <= WM8731_RESET;
 }
 
-#define wm8731_reset(c)	snd_soc_write(c, WM8731_RESET, 0)
+#define wm8731_reset(m)	regmap_write(m, WM8731_RESET, 0)
 
 static const char *wm8731_input_select[] = {"Line In", "Mic"};
 
@@ -571,69 +571,63 @@ static struct snd_soc_dai_driver wm8731_dai = {
 	.symmetric_rates = 1,
 };
 
-static int wm8731_probe(struct snd_soc_codec *codec)
+static int wm8731_request_supplies(struct device *dev,
+		struct wm8731_priv *wm8731)
 {
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
 	int ret = 0, i;
 
 	for (i = 0; i < ARRAY_SIZE(wm8731->supplies); i++)
 		wm8731->supplies[i].supply = wm8731_supply_names[i];
 
-	ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8731->supplies),
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8731->supplies),
 				 wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		dev_err(dev, "Failed to request supplies: %d\n", ret);
 		return ret;
 	}
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
 				    wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		dev_err(dev, "Failed to enable supplies: %d\n", ret);
 		return ret;
 	}
 
-	ret = wm8731_reset(codec);
+	return 0;
+}
+
+static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+{
+	int ret = 0;
+
+	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
-		dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+		dev_err(dev, "Failed to issue reset: %d\n", ret);
 		goto err_regulator_enable;
 	}
 
-	snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	/* Clear POWEROFF, keep everything else disabled */
+	regmap_write(wm8731->regmap, WM8731_PWR, 0x7f);
 
 	/* Latch the update bits */
-	snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LOUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_ROUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_RINVOL, 0x100, 0);
 
 	/* Disable bypass path by default */
-	snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_APANA, 0x8, 0);
 
-	/* Regulators will have been enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
+	regcache_mark_dirty(wm8731->regmap);
 
 err_regulator_enable:
+	/* Regulators will be enabled by bias management */
 	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
 
 	return ret;
 }
 
-/* power down chip */
-static int wm8731_remove(struct snd_soc_codec *codec)
-{
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
-}
-
 static struct snd_soc_codec_driver soc_codec_dev_wm8731 = {
-	.probe =	wm8731_probe,
-	.remove =	wm8731_remove,
 	.set_bias_level = wm8731_set_bias_level,
 	.suspend_bias_off = true,
 
@@ -690,6 +684,12 @@ static int wm8731_spi_probe(struct spi_device *spi)
 
 	mutex_init(&wm8731->lock);
 
+	spi_set_drvdata(spi, wm8731);
+
+	ret = wm8731_request_supplies(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -698,7 +698,9 @@ static int wm8731_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	spi_set_drvdata(spi, wm8731);
+	ret = wm8731_hw_init(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&spi->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
@@ -754,6 +756,12 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 
 	mutex_init(&wm8731->lock);
 
+	i2c_set_clientdata(i2c, wm8731);
+
+	ret = wm8731_request_supplies(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -762,7 +770,9 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	i2c_set_clientdata(i2c, wm8731);
+	ret = wm8731_hw_init(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
Signature · 1 line
1.9.1
Acked-by on v2 1/1
#1 lore raw
Quoted 10 lines · Sergey Kiselev

From: Sergey Kiselev <[email protected]>

This patch moves the requesting supplies, hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe. So that the codec hardware is initialized when loading the codec driver, and not when loading the machine driver. This avoids unnecesary hardware resets and re-initializations when re-loading the machine driver.

---

Thanks,
Charles

maintainer
#2 lore raw
In reply to Sergey Kiselev
Quoted 4 lines · Sergey Kiselev

From: Sergey Kiselev <[email protected]>

This patch moves the requesting supplies, hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe.

This doesn't apply against current code, please check and resend.

#3 lore raw
Quoted 7 lines · On Mon, 8 Jun 2015 19:01:55 +0100 Mark Brown <[email protected]> wrote:
Quoted 4 lines · Sergey Kiselev

From: Sergey Kiselev <[email protected]>

This patch moves the requesting supplies, hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe.

This doesn't apply against current code, please check and resend.

Weird. Works for me. I am using
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
for-next branch.

Signature · 1 line
Sergey
maintainer
#4 lore raw
Quoted 7 lines · Sergey Kiselev
Quoted 1 line · Mark Brown

This doesn't apply against current code, please check and resend.

Weird. Works for me. I am using
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
for-next branch.

Please note the "and resend" above...

maintainer
#5 lore raw

Applied "ASoC: wm8731: initialize the hardware when loading the codec driver" to the asoc tree

In reply to Sergey Kiselev

The patch

ASoC: wm8731: initialize the hardware when loading the codec driver

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 6702dfcc571d962df499f7466f54e07d044e6cd1 Mon Sep 17 00:00:00 2001

From: Sergey Kiselev <[email protected]>
Date: Fri, 5 Jun 2015 11:55:27 -0700
Subject: [PATCH] ASoC: wm8731: initialize the hardware when loading the codec
driver

This patch moves the requesting supplies, hardware reset and initialization from wm8731_probe to wm8731_i2c_probe and wm8731_spi_probe. So that the codec hardware is initialized when loading the codec driver, and not when loading the machine driver. This avoids unnecesary hardware resets and re-initializations when re-loading the machine driver.

---
 sound/soc/codecs/wm8731.c | 74 +++++++++++++++++++++++++++--------------------
 1 file changed, 42 insertions(+), 32 deletions(-)
sound/soc/codecs/wm8731.c +42 -32
index 915ea11..f22935a 100644
@@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev, unsigned int reg)
 	return reg <= WM8731_RESET;
 }
 
-#define wm8731_reset(c)	snd_soc_write(c, WM8731_RESET, 0)
+#define wm8731_reset(m)	regmap_write(m, WM8731_RESET, 0)
 
 static const char *wm8731_input_select[] = {"Line In", "Mic"};
 
@@ -571,69 +571,63 @@ static struct snd_soc_dai_driver wm8731_dai = {
 	.symmetric_rates = 1,
 };
 
-static int wm8731_probe(struct snd_soc_codec *codec)
+static int wm8731_request_supplies(struct device *dev,
+		struct wm8731_priv *wm8731)
 {
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
 	int ret = 0, i;
 
 	for (i = 0; i < ARRAY_SIZE(wm8731->supplies); i++)
 		wm8731->supplies[i].supply = wm8731_supply_names[i];
 
-	ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8731->supplies),
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8731->supplies),
 				 wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		dev_err(dev, "Failed to request supplies: %d\n", ret);
 		return ret;
 	}
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
 				    wm8731->supplies);
 	if (ret != 0) {
-		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		dev_err(dev, "Failed to enable supplies: %d\n", ret);
 		return ret;
 	}
 
-	ret = wm8731_reset(codec);
+	return 0;
+}
+
+static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
+{
+	int ret = 0;
+
+	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
-		dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+		dev_err(dev, "Failed to issue reset: %d\n", ret);
 		goto err_regulator_enable;
 	}
 
-	snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	/* Clear POWEROFF, keep everything else disabled */
+	regmap_write(wm8731->regmap, WM8731_PWR, 0x7f);
 
 	/* Latch the update bits */
-	snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
-	snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LOUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_ROUT1V, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_LINVOL, 0x100, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_RINVOL, 0x100, 0);
 
 	/* Disable bypass path by default */
-	snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
+	regmap_update_bits(wm8731->regmap, WM8731_APANA, 0x8, 0);
 
-	/* Regulators will have been enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
+	regcache_mark_dirty(wm8731->regmap);
 
 err_regulator_enable:
+	/* Regulators will be enabled by bias management */
 	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
 
 	return ret;
 }
 
-/* power down chip */
-static int wm8731_remove(struct snd_soc_codec *codec)
-{
-	struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
-
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
-	return 0;
-}
-
 static struct snd_soc_codec_driver soc_codec_dev_wm8731 = {
-	.probe =	wm8731_probe,
-	.remove =	wm8731_remove,
 	.set_bias_level = wm8731_set_bias_level,
 	.suspend_bias_off = true,
 
@@ -690,6 +684,12 @@ static int wm8731_spi_probe(struct spi_device *spi)
 
 	mutex_init(&wm8731->lock);
 
+	spi_set_drvdata(spi, wm8731);
+
+	ret = wm8731_request_supplies(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_spi(spi, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -698,7 +698,9 @@ static int wm8731_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	spi_set_drvdata(spi, wm8731);
+	ret = wm8731_hw_init(&spi->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&spi->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
@@ -754,6 +756,12 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 
 	mutex_init(&wm8731->lock);
 
+	i2c_set_clientdata(i2c, wm8731);
+
+	ret = wm8731_request_supplies(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
+
 	wm8731->regmap = devm_regmap_init_i2c(i2c, &wm8731_regmap);
 	if (IS_ERR(wm8731->regmap)) {
 		ret = PTR_ERR(wm8731->regmap);
@@ -762,7 +770,9 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	i2c_set_clientdata(i2c, wm8731);
+	ret = wm8731_hw_init(&i2c->dev, wm8731);
+	if (ret != 0)
+		return ret;
 
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm8731, &wm8731_dai, 1);
Signature · 1 line
2.1.4