ARM: dts: imx7d: add cortex-a7 coresight component
Subsystems (2)
PATCH v3 1/1 ARM: dts: imx7d: add cortex-a7 coresight component
From: Frank Li <[email protected]>
Added etm, etb, funnel and replicator
usage example:
echo 1 >/sys/bus/coresight/devices/30086000.etr/enable_sink
echo 1 >/sys/bus/coresight/devices/3007c000.etm/enable_source
coresight-tmc 30086000.etr: TMC enabled
coresight-replicator replicator.1: REPLICATOR enabled
coresight-tmc 30084000.tmc: TMC enabled
coresight-funnel 30083000.funnel: FUNNEL inport 0 enabled
coresight-funnel 30041000.funnel: FUNNEL inport 0 enabled
coresight-etm3x 3007c000.etm: ETM tracing enabled
etm enable here.
trace data save at /dev/30086000.etr
cat /dev/30086000.etr > trace.data
coresight-tmc 30086000.etr: TMC read start
coresight-tmc 30086000.etr: TMC read end
use ptm2human(https://github.com/hwangcc23/ptm2human) to show trace data
ptm2human -i trace.dataSigned-off-by Frank Li <[email protected]>
---
Change from v2 to v3
- fix multiline comments
- remove some reduntant space line
- remove extra space after =
- Remove @0
Change from V1 to V2
- remove "0" after @
- add comments about unused funnel input port
- add comments about add arm,primecell-periphid
arch/arm/boot/dts/imx7d.dtsi | 203 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+)
arch/arm/boot/dts/imx7d.dtsi +203 -0
@@ -121,6 +121,209 @@ clock-output-names = "osc"; }; + etr at 30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu at 30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port at 0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port at 1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port at 2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf at 30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + + port at 1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel at 30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port at 0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port at 1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + + port at 2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + funnel at 30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port at 0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + port at 1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; + + /* funnel output port */ + port at 2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + etm at 3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + + etm at 3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>;
Signature · 1 line
1.9.1
PATCH v3 1/1 ARM: dts: imx7d: add cortex-a7 coresight component
Quoted 28 lines · On Tue, Jun 30, 2015 at 9:58 AM, <[email protected]> wrote:
From: Frank Li <[email protected]>
Added etm, etb, funnel and replicator
usage example:
echo 1 >/sys/bus/coresight/devices/30086000.etr/enable_sink echo 1 >/sys/bus/coresight/devices/3007c000.etm/enable_source coresight-tmc 30086000.etr: TMC enabled coresight-replicator replicator.1: REPLICATOR enabled coresight-tmc 30084000.tmc: TMC enabled coresight-funnel 30083000.funnel: FUNNEL inport 0 enabled coresight-funnel 30041000.funnel: FUNNEL inport 0 enabled coresight-etm3x 3007c000.etm: ETM tracing enabled etm enable here. trace data save at /dev/30086000.etr cat /dev/30086000.etr > trace.data coresight-tmc 30086000.etr: TMC read start coresight-tmc 30086000.etr: TMC read end use ptm2human(https://github.com/hwangcc23/ptm2human) to show trace data ptm2human -i trace.data
Quoted 1 line
Signed-off-by Frank Li <[email protected]>
Ping.
Quoted 232 lines
---
Change from v2 to v3
- fix multiline comments
- remove some reduntant space line
- remove extra space after =
- Remove @0Change from V1 to V2
- remove "0" after @
- add comments about unused funnel input port
- add comments about add arm,primecell-periphidarch/arm/boot/dts/imx7d.dtsi | 203 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+)arch/arm/boot/dts/imx7d.dtsi +203
-1@@ -121,6 +121,209 @@ clock-output-names = "osc"; }; + etr at 30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu at 30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port at 0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port at 1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port at 2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf at 30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + + port at 1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel at 30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port at 0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port at 1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + + port at 2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + funnel at 30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port at 0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + port at 1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; + + /* funnel output port */ + port at 2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + etm at 3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + + etm at 3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; --1.9.1
PATCH v3 1/1 ARM: dts: imx7d: add cortex-a7 coresight component
In reply to Frank.Li at freescale.comQuoted 28 lines · Frank.Li at freescale.com
From: Frank Li <[email protected]>
Added etm, etb, funnel and replicator
usage example:
echo 1 >/sys/bus/coresight/devices/30086000.etr/enable_sink echo 1 >/sys/bus/coresight/devices/3007c000.etm/enable_source coresight-tmc 30086000.etr: TMC enabled coresight-replicator replicator.1: REPLICATOR enabled coresight-tmc 30084000.tmc: TMC enabled coresight-funnel 30083000.funnel: FUNNEL inport 0 enabled coresight-funnel 30041000.funnel: FUNNEL inport 0 enabled coresight-etm3x 3007c000.etm: ETM tracing enabled etm enable here. trace data save at /dev/30086000.etr cat /dev/30086000.etr > trace.data coresight-tmc 30086000.etr: TMC read start coresight-tmc 30086000.etr: TMC read end use ptm2human(https://github.com/hwangcc23/ptm2human) to show trace data ptm2human -i trace.data
Quoted 1 line
Signed-off-by Frank Li <[email protected]>
Mathieu gave his ACK on your v2 of the patch. You should add his ACK on v3. Applied with Mathieu's ACK added.
Shawn