mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

PATCH Applied Michael Brunner 3 participants 3 messages Jul 14, 2015 – Jul 20, 2015 Multifunction devices (MFD)

Share & tools

Michael Brunner

author

2015-07-14 11:21 UTC #0 lore raw

PATCH 1/1 mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.

Signed-off-by Michael Brunner <[email protected]>

Acked-by Christian Rauch <[email protected]>

---
 drivers/mfd/Kconfig       |  2 ++
 drivers/mfd/kempld-core.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

drivers/mfd/Kconfig +2 -0

index 6538159..51809e2 100644
@@ -375,12 +375,14 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bBL6
 		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
 		* COMe-cBL6
 		* COMe-cBT6
+		* COMe-cBW6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
 		* COMe-cHL6

drivers/mfd/kempld-core.c +16 -0

index 8057849..463f4ea 100644
@@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {
 
 static struct dmi_system_id kempld_dmi_table[] __initdata = {
 	{
+		.ident = "BBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "BHL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

@@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CBW6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

Signature · 1 line

1.8.5.1

Guenter Roeck

Reviewed-by on v1 1/1

2015-07-14 14:34 UTC #1 lore raw

Quoted 6 lines · Michael Brunner

This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>
Acked-by Christian Rauch <[email protected]>

Reviewed-by Guenter Roeck <[email protected]>

Lee Jones

Applied

2015-07-20 08:06 UTC #2 lore raw

In reply to Michael Brunner

Quoted 10 lines · Michael Brunner

This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by Michael Brunner <[email protected]>
Acked-by Christian Rauch <[email protected]>
---
 drivers/mfd/Kconfig       |  2 ++
 drivers/mfd/kempld-core.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

Applied, thanks.

Quoted 53 lines

drivers/mfd/Kconfig +2 -0

index 6538159..51809e2 100644
@@ -375,12 +375,14 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bBL6
 		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
 		* COMe-cBL6
 		* COMe-cBT6
+		* COMe-cBW6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
 		* COMe-cHL6

drivers/mfd/kempld-core.c +16 -0

index 8057849..463f4ea 100644
@@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {
 
 static struct dmi_system_id kempld_dmi_table[] __initdata = {
 	{
+		.ident = "BBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "BHL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

@@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CBW6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog