Skip to contentSkip to conversation

rtlwifi: Trivial: fix typo in comments

PATCH Applied Nik Nyby 3 participants 3 messages Jun 30, 2015 – Jul 21, 2015 Networking drivers (wireless)

lore
Share & tools
lore

Nik Nyby

author
#0 lore raw

PATCH 1/1 rtlwifi: Trivial: fix typo in comments

This fixes a typo in two comments: "paht" -> "path".

Signed-off-by Nik Nyby <[email protected]>
---
 drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/rtlwifi/rtl8192de/phy.c +2 -2
index 1961b8e..bb06fe8 100644
@@ -3515,14 +3515,14 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
 	for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
 	     rfpath++) {
 		if (rtlhal->current_bandtype == BAND_ON_2_4G) {
-			/* MOD_AG for RF paht_A 0x18 BIT8,BIT16 */
+			/* MOD_AG for RF path_A 0x18 BIT8,BIT16 */
 			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(8) | BIT(16) |
 				      BIT(18), 0);
 			/* RF0x0b[16:14] =3b'111 */
 			rtl_set_rfreg(hw, (enum radio_path)rfpath, 0x0B,
 				      0x1c000, 0x07);
 		} else {
-			/* MOD_AG for RF paht_A 0x18 BIT8,BIT16 */
+			/* MOD_AG for RF path_A 0x18 BIT8,BIT16 */
 			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(8) |
 				      BIT(16) | BIT(18),
 				      (BIT(16) | BIT(8)) >> 8);
Signature · 1 line
2.1.4
Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Nik Nyby

This fixes a typo in two comments: "paht" -> "path".

Signed-off-by Nik Nyby <[email protected]>
---
  drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
Acked-by Larry Finger <[email protected]>

Larry

Quoted 22 lines
drivers/net/wireless/rtlwifi/rtl8192de/phy.c +2 -2
index 1961b8e..bb06fe8 100644
@@ -3515,14 +3515,14 @@ void rtl92d_update_bbrf_configuration(struct ieee80211_hw *hw)
  	for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
  	     rfpath++) {
  		if (rtlhal->current_bandtype == BAND_ON_2_4G) {
-			/* MOD_AG for RF paht_A 0x18 BIT8,BIT16 */
+			/* MOD_AG for RF path_A 0x18 BIT8,BIT16 */
  			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(8) | BIT(16) |
  				      BIT(18), 0);
  			/* RF0x0b[16:14] =3b'111 */
  			rtl_set_rfreg(hw, (enum radio_path)rfpath, 0x0B,
  				      0x1c000, 0x07);
  		} else {
-			/* MOD_AG for RF paht_A 0x18 BIT8,BIT16 */
+			/* MOD_AG for RF path_A 0x18 BIT8,BIT16 */
  			rtl_set_rfreg(hw, rfpath, RF_CHNLBW, BIT(8) |
  				      BIT(16) | BIT(18),
  				      (BIT(16) | BIT(8)) >> 8);