staging: dgnc: dgnc_neo.c: Style and spelling fixes

index 900e3ae..174a69f 100644
@@ -79,7 +79,8 @@ struct board_ops dgnc_neo_ops = {
 	.send_immediate_char =		neo_send_immediate_char
 };
 
-static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08,
+				     0x10, 0x20, 0x40, 0x80 };
 
 
 /*

@@ -113,14 +114,15 @@ static inline void neo_set_cts_flow_control(struct channel_t *ch)
 	/* Turn off auto Xon flow control */
 	efr &= ~UART_17158_EFR_IXON;
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	/* Feed the UART our trigger levels */
 	writeb(8, &ch->ch_neo_uart->tfifo);

@@ -149,13 +151,14 @@ static inline void neo_set_rts_flow_control(struct channel_t *ch)
 	ier &= ~UART_17158_IER_XOFF;
 	efr &= ~UART_17158_EFR_IXOFF;
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+		&ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);

@@ -187,13 +190,14 @@ static inline void neo_set_ixon_flow_control(struct channel_t *ch)
 	/* Turn on auto Xon flow control */
 	efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);

@@ -225,14 +229,15 @@ static inline void neo_set_ixoff_flow_control(struct channel_t *ch)
 	ier |= UART_17158_IER_XOFF;
 	efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	writeb(8, &ch->ch_neo_uart->tfifo);
 	ch->ch_t_tlevel = 8;

@@ -267,14 +272,15 @@ static inline void neo_set_no_input_flow_control(struct channel_t *ch)
 		efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
 
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 

@@ -305,14 +311,15 @@ static inline void neo_set_no_output_flow_control(struct channel_t *ch)
 	else
 		efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Since Exar's spec says we have to zero it out before setting it */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+		&ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 

@@ -333,7 +340,8 @@ static inline void neo_set_new_start_stop_chars(struct channel_t *ch)
 {
 
 	/* if hardware flow control is set, then skip this whole thing */
-	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) || ch->ch_c_cflag & CRTSCTS)
+	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) ||
+			ch->ch_c_cflag & CRTSCTS)
 		return;
 
 	/* Tell UART what start/stop chars it should be looking for */

@@ -408,7 +416,8 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			break;
 
 		/*
-		 * Yank off the upper 2 bits, which just show that the FIFO's are enabled.
+		 * Yank off the upper 2 bits,
+		 * which just show that the FIFO's are enabled.
 		 */
 		isr &= ~(UART_17158_IIR_FIFO_ENABLED);
 

@@ -418,7 +427,10 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			ch->ch_intr_rx++;
 			neo_copy_data_from_uart_to_queue(ch);
 
-			/* Call our tty layer to enforce queue flow control if needed. */
+			/*
+			 * Call our tty layer to
+			 * enforce queue flow control if needed.
+			 */
 			spin_lock_irqsave(&ch->ch_lock, flags);
 			dgnc_check_queue_flow_control(ch);
 			spin_unlock_irqrestore(&ch->ch_lock, flags);

@@ -443,7 +455,10 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			 * one it was, so we can suspend or resume data flow.
 			 */
 			if (cause == UART_17158_XON_DETECT) {
-				/* Is output stopped right now, if so, resume it */
+				/*
+				 * Is output stopped right now,
+				 * if so, resume it
+				 */
 				if (brd->channels[port]->ch_flags & CH_STOP) {
 					spin_lock_irqsave(&ch->ch_lock,
 							  flags);

@@ -452,7 +467,8 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 							       flags);
 				}
 			} else if (cause == UART_17158_XOFF_DETECT) {
-				if (!(brd->channels[port]->ch_flags & CH_STOP)) {
+				if (!(brd->channels[port]->ch_flags &
+							CH_STOP)) {
 					spin_lock_irqsave(&ch->ch_lock,
 							  flags);
 					ch->ch_flags |= CH_STOP;

@@ -464,8 +480,10 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 
 		if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) {
 			/*
-			 * If we get here, this means the hardware is doing auto flow control.
-			 * Check to see whether RTS/DTR or CTS/DSR caused this interrupt.
+			 * If we get here,
+			 * this means the hardware is doing auto flow control.
+			 * Check to see whether RTS/DTR or CTS/DSR
+			 * caused this interrupt.
 			 */
 			brd->intr_modem++;
 			ch->ch_intr_modem++;

@@ -561,7 +579,8 @@ static inline void neo_parse_lsr(struct dgnc_board *brd, uint port)
 		 * Rx Oruns. Exar says that an orun will NOT corrupt
 		 * the FIFO. It will just replace the holding register
 		 * with this new data byte. So basically just ignore this.
-		 * Probably we should eventually have an orun stat in our driver...
+		 * Probably we should eventually
+		 * have an orun stat in our driver...
 		 */
 		ch->ch_err_overrun++;
 	}

@@ -633,7 +652,7 @@ static void neo_param(struct tty_struct *tty)
 		neo_flush_uart_write(ch);
 		neo_flush_uart_read(ch);
 
-		/* The baudrate is B0 so all modem lines are to be dropped. */
+		/* The baud rate is B0 so all modem lines are to be dropped. */
 		ch->ch_flags |= (CH_BAUD0);
 		ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
 		neo_assert_modem_signals(ch);

@@ -683,8 +702,12 @@ static void neo_param(struct tty_struct *tty)
 				4800,   9600,   19200,  38400 }
 		};
 
-		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
-		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGNC_PRINT))
+		/*
+		 * Only use the TXPrint baud rate
+		 * if the terminal unit is NOT open
+		 */
+		if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
+				(un->un_type == DGNC_PRINT))
 			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
 		else
 			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;

@@ -697,7 +720,8 @@ static void neo_param(struct tty_struct *tty)
 
 		jindex = baud;
 
-		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+		if ((iindex >= 0) && (iindex < 4) &&
+				(jindex >= 0) && (jindex < 16))
 			baud = bauds[iindex][jindex];
 		else
 			baud = 0;

@@ -804,8 +828,12 @@ static void neo_param(struct tty_struct *tty)
 	if (ch->ch_digi.digi_flags & CTSPACE || ch->ch_c_cflag & CRTSCTS) {
 		neo_set_cts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXON) {
-		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		/*
+		 * If start/stop is set to disable,
+		 * then we should disable flow control
+		 */
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+				(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_output_flow_control(ch);
 		else
 			neo_set_ixon_flow_control(ch);

@@ -816,8 +844,12 @@ static void neo_param(struct tty_struct *tty)
 	if (ch->ch_digi.digi_flags & RTSPACE || ch->ch_c_cflag & CRTSCTS) {
 		neo_set_rts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXOFF) {
-		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		/*
+		 * If start/stop is set to disable,
+		 * then we should disable flow control
+		 */
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+				(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_input_flow_control(ch);
 		else
 			neo_set_ixoff_flow_control(ch);

@@ -959,14 +991,18 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 
 	/*
 	 * If 0, no interrupts pending.
-	 * This can happen if the IRQ is shared among a couple Neo/Classic boards.
+	 * This can happen if the IRQ is shared
+	 * among a couple Neo/Classic boards.
 	 */
 	if (!uart_poll) {
 		spin_unlock_irqrestore(&brd->bd_intr_lock, flags);
 		return IRQ_NONE;
 	}
 
-	/* At this point, we have at least SOMETHING to service, dig further... */
+	/*
+	 * At this point, we have at least SOMETHING
+	 * to service, dig further...
+	 */
 
 	current_port = 0;
 

@@ -989,7 +1025,10 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 		uart_poll &= ~(dgnc_offset_table[port]);
 
 		if (!type) {
-			/* If no type, just ignore it, and move onto next port */
+			/*
+			 * If no type, just ignore it,
+			 * and move onto next port
+			 */
 			continue;
 		}
 

@@ -1009,7 +1048,10 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			ch = brd->channels[port];
 			neo_copy_data_from_uart_to_queue(ch);
 
-			/* Call our tty layer to enforce queue flow control if needed. */
+			/*
+			 * Call our tty layer to
+			 * enforce queue flow control if needed.
+			 */
 			spin_lock_irqsave(&ch->ch_lock, flags2);
 			dgnc_check_queue_flow_control(ch);
 			spin_unlock_irqrestore(&ch->ch_lock, flags2);

@@ -1025,16 +1067,19 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 
 		case UART_17158_TXRDY:
 			/*
-			 * TXRDY interrupt clears after reading ISR register for the UART channel.
+			 * TXRDY interrupt clears after
+			 * reading ISR register for the UART channel.
 			 */
 
 			/*
 			 * Yes, this is odd...
 			 * Why would I check EVERY possibility of type of
 			 * interrupt, when we know its TXRDY???
-			 * Becuz for some reason, even tho we got triggered for TXRDY,
-			 * it seems to be occasionally wrong. Instead of TX, which
-			 * it should be, I was getting things like RXDY too. Weird.
+			 * Because for some reason, even though
+			 * we got triggered for TXRDY,
+			 * it seems to be occasionally wrong.
+			 * Instead of TX, which it should be,
+			 * I was getting things like RXDY too. Weird.
 			 */
 			neo_parse_isr(brd, port);
 			continue;

@@ -1049,7 +1094,8 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 		default:
 			/*
 			 * The UART triggered us with a bogus interrupt type.
-			 * It appears the Exar chip, when REALLY bogged down, will throw
+			 * It appears the Exar chip,
+			 * when REALLY bogged down, will throw
 			 * these once and awhile.
 			 * Its harmless, just ignore it and move on.
 			 */

@@ -1200,7 +1246,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		linestatus = 0;
 
 		/* Copy data from uart to the queue */
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+		memcpy_fromio(ch->ch_rqueue + head,
+			      &ch->ch_neo_uart->txrxburst, n);
 
 		/*
 		 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed

@@ -1254,7 +1301,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		 * we don't miss our TX FIFO emptys.
 		 */
 		if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) {
-			linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR);
+			linestatus &= ~(UART_LSR_THRE |
+					UART_17158_TX_AND_FIFO_CLR);
 			ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
 		}
 

@@ -1270,7 +1318,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		}
 
 		/*
-		 * If our queue is full, we have no choice but to drop some data.
+		 * If our queue is full,
+		 * we have no choice but to drop some data.
 		 * The assumption is that HWFLOW or SWFLOW should have stopped
 		 * things way way before we got to this point.
 		 *

@@ -1284,7 +1333,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 			qleft++;
 		}
 
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
+		memcpy_fromio(ch->ch_rqueue + head,
+			      &ch->ch_neo_uart->txrxburst, 1);
 		ch->ch_equeue[head] = (unsigned char) linestatus;
 
 		/* Ditch any remaining linestatus value. */

@@ -1339,7 +1389,8 @@ static int neo_drain(struct tty_struct *tty, uint seconds)
 	 *
 	 * NOTE: TODO: Do something with time passed in.
 	 */
-	rc = wait_event_interruptible(un->un_flags_wait, ((un->un_flags & UN_EMPTY) == 0));
+	rc = wait_event_interruptible(un->un_flags_wait,
+				      ((un->un_flags & UN_EMPTY) == 0));
 
 	/* If ret is non-zero, user ctrl-c'ed us */
 	return rc;

@@ -1359,12 +1410,16 @@ static void neo_flush_uart_write(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
+		&ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
 
-		/* Check to see if the UART feels it completely flushed the FIFO. */
+		/*
+		 * Check to see if the UART feels
+		 * it completely flushed the FIFO.
+		 */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 4)
 			udelay(10);

@@ -1389,12 +1444,16 @@ static void neo_flush_uart_read(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR),
+		&ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
 
-		/* Check to see if the UART feels it completely flushed the FIFO. */
+		/*
+		 * Check to see if the UART feels
+		 * it completely flushed the FIFO.
+		 */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 2)
 			udelay(10);

@@ -1440,8 +1499,10 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 			ch->ch_cached_lsr &= ~(UART_LSR_THRE);
 
 			/*
-			 * If RTS Toggle mode is on, turn on RTS now if not already set,
-			 * and make sure we get an event when the data transfer has completed.
+			 * If RTS Toggle mode is on,
+			 * turn on RTS now if not already set,
+			 * and make sure we get an event when
+			 * the data transfer has completed.
 			 */
 			if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
 				if (!(ch->ch_mostat & UART_MCR_RTS)) {

@@ -1451,8 +1512,10 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 				ch->ch_tun.un_flags |= (UN_EMPTY);
 			}
 			/*
-			 * If DTR Toggle mode is on, turn on DTR now if not already set,
-			 * and make sure we get an event when the data transfer has completed.
+			 * If DTR Toggle mode is on,
+			 * turn on DTR now if not already set,
+			 * and make sure we get an event when
+			 * the data transfer has completed.
 			 */
 			if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
 				if (!(ch->ch_mostat & UART_MCR_DTR)) {

@@ -1462,7 +1525,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 				ch->ch_tun.un_flags |= (UN_EMPTY);
 			}
 
-			writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+			writeb(ch->ch_wqueue[ch->ch_w_tail],
+				&ch->ch_neo_uart->txrx);
 			ch->ch_w_tail++;
 			ch->ch_w_tail &= WQUEUEMASK;
 			ch->ch_txcount++;

@@ -1508,7 +1572,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 
 		/*
 		 * If RTS Toggle mode is on, turn on RTS now if not already set,
-		 * and make sure we get an event when the data transfer has completed.
+		 * and make sure we get an event when
+		 * the data transfer has completed.
 		 */
 		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
 			if (!(ch->ch_mostat & UART_MCR_RTS)) {

@@ -1520,7 +1585,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 
 		/*
 		 * If DTR Toggle mode is on, turn on DTR now if not already set,
-		 * and make sure we get an event when the data transfer has completed.
+		 * and make sure we get an event when
+		 * the data transfer has completed.
 		 */
 		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
 			if (!(ch->ch_mostat & UART_MCR_DTR)) {

@@ -1530,7 +1596,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 			ch->ch_tun.un_flags |= (UN_EMPTY);
 		}
 
-		memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+		memcpy_toio(&ch->ch_neo_uart->txrxburst,
+			    ch->ch_wqueue + tail, s);
 
 		/* Add and flip queue if needed */
 		tail = (tail + s) & WQUEUEMASK;

@@ -1584,7 +1651,7 @@ static void neo_parse_modem(struct channel_t *ch, unsigned char signals)
 		}
 	}
 
-	/* Scrub off lower bits. They signify delta's, which I don't care about */
+	/* Scrub off lower bits. They signify delta's.*/
 	msignals &= 0xf0;
 
 	if (msignals & UART_MSR_DCD)

@@ -1671,7 +1738,8 @@ static void neo_uart_init(struct channel_t *ch)
 
 	/* Clear out UART and FIFO */
 	readb(&ch->ch_neo_uart->txrx);
-	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
+		&ch->ch_neo_uart->isr_fcr);
 	readb(&ch->ch_neo_uart->lsr);
 	readb(&ch->ch_neo_uart->msr);
 

@@ -1773,7 +1841,8 @@ static void neo_send_immediate_char(struct channel_t *ch, unsigned char c)
 }
 
 
-static unsigned int neo_read_eeprom(unsigned char __iomem *base, unsigned int address)
+static unsigned int neo_read_eeprom(unsigned char __iomem *base,
+				    unsigned int address)
 {
 	unsigned int enable;
 	unsigned int bits;

@@ -1833,7 +1902,9 @@ static void neo_vpd(struct dgnc_board *brd)
 	}
 
 	if  (((brd->vpd[0x08] != 0x82)	   /* long resource name tag */
-		&&  (brd->vpd[0x10] != 0x82))   /* long resource name tag (PCI-66 files)*/
+		&&  (brd->vpd[0x10] != 0x82))   /* long resource
+						 * name tag (PCI-66 files)
+						 */
 		||  (brd->vpd[0x7F] != 0x78)) { /* small resource end tag */
 
 		memset(brd->vpd, '\0', NEO_VPD_IMAGESIZE);