Skip to contentSkip to conversation

ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys

PATCH New Chen-Yu Tsai 2 participants 5 messages Jul 31, 2015

Subsystems (2)
Device tree bindings Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

Chen-Yu Tsai

author
#0 lore raw

v2 cover ARM: dts: sun5i: hsg-h702: Enable USB OTG and LRADC keys

Hi Maxime,

This series enables USB OTG and the volume buttons on the side of the HSG-H702 tablet.

v2 uses a reference for usb0_vbus_pin_a, instead of full path. The third patch is also dropped to avoid confusion.

Regards
ChenYu

Chen-Yu Tsai (2):
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller

 arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 58 ++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
Signature · 1 line
2.5.0
author
#1 lore raw

PATCH v2 1/2 ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC

The tablet has volume up/down buttons on the side, connected to the LRADC.

Signed-off-by Chen-Yu Tsai <[email protected]>
---
 arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +20 -0
index 990f9d61ae4d..4b8808ab9711 100644
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {

@@ -96,6 +97,25 @@
 	status = "okay";
 };
 
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button at 200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button at 400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
Signature · 1 line
2.5.0
Applied
#2 lore raw

PATCH v2 1/2 ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC

1;3803;0c

Quoted 3 lines · Chen-Yu Tsai

The tablet has volume up/down buttons on the side, connected to the LRADC.

Signed-off-by Chen-Yu Tsai <[email protected]>

Applied, thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150731/754edc0a/attachment.sig>
author
#3 lore raw

PATCH v2 2/2 ARM: dts: sun5i: hsg-h702: Enable USB OTG controller

In reply to Chen-Yu Tsai

This tablet has proper USB OTG support, using 3 GPIO pins for ID and VBUS detection, and also VBUS control.

Signed-off-by Chen-Yu Tsai <[email protected]>
---
 arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 38 ++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +38 -0
index 4b8808ab9711..3724b988064e 100644
@@ -130,6 +130,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_h702: mmc0_cd_pin at 0 {
 		allwinner,pins = "PG0";

@@ -137,6 +141,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin at 0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 #include "axp209.dtsi"

@@ -172,13 +190,33 @@
 	regulator-name = "vcc-wifi";
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins_b>;
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
 };
Signature · 1 line
2.5.0
Applied
#4 lore raw

PATCH v2 2/2 ARM: dts: sun5i: hsg-h702: Enable USB OTG controller

Quoted 4 lines · Chen-Yu Tsai

This tablet has proper USB OTG support, using 3 GPIO pins for ID and VBUS detection, and also VBUS control.

Signed-off-by Chen-Yu Tsai <[email protected]>

Applied, thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150731/27bc03ff/attachment.sig>