4.1.4-stable review

cover

	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.4-rc1.gz
    Linux 4.1.4-rc1
    fuse: initialize fc->release before calling it
    Btrfs: fix list transaction->pending_ordered corruption
    md: clear mddev->private when it has been freed.
    drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
    bus: arm-ccn: Fix node->XP config conversion
    USB: option: add 2020:4000 ID
    USB: cp210x: add ID for Aruba Networks controllers
    usb: gadget: f_fs: do not set cancel function on synchronous {read,write}
    ASoC: wm8903: Fix define for WM8903_VMID_RES_250K
 Documentation/ABI/testing/ima_policy               |  26 +-
 Documentation/ABI/testing/sysfs-ata                |  11 +
 Documentation/ABI/testing/sysfs-bus-iio            |   6 +-
 .../pinctrl/marvell,armada-370-pinctrl.txt         |   4 +-
 .../pinctrl/marvell,armada-375-pinctrl.txt         |   4 +-
 .../pinctrl/marvell,armada-38x-pinctrl.txt         |  38 +-
 .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt |  32 +-
 .../devicetree/bindings/usb/atmel-usb.txt          |   6 +-
 Documentation/kernel-parameters.txt                |  10 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/at91-sama5d4ek.dts               |   4 +-
 arch/arm/boot/dts/at91sam9g45.dtsi                 |   2 +-
 arch/arm/boot/dts/at91sam9x5.dtsi                  |   2 +-
 arch/arm/boot/dts/imx23.dtsi                       |   1 +
 arch/arm/boot/dts/sama5d3.dtsi                     |   2 +-
 arch/arm/boot/dts/sama5d4.dtsi                     |  22 +-
 arch/arm/kernel/smp.c                              |   4 +-
 arch/arm/mach-dove/include/mach/irqs.h             | 118 +++----
 arch/arm/mach-dove/irq.c                           |   8 +-
 arch/arm/vdso/vdsomunge.c                          |  56 +--
 arch/arm64/kernel/smp.c                            |   4 +-
 arch/arm64/mm/hugetlbpage.c                        |   4 +-
 arch/arm64/net/bpf_jit.h                           |   4 +
 arch/arm64/net/bpf_jit_comp.c                      |  29 +-
 arch/m68k/Kconfig.cpu                              |  41 +--
 arch/m68k/include/asm/coldfire.h                   |   2 +-
 arch/openrisc/Kconfig                              |   4 +-
 block/bio.c                                        |  15 +-
 crypto/asymmetric_keys/asymmetric_keys.h           |   3 +
 crypto/asymmetric_keys/asymmetric_type.c           |  20 +-
 crypto/asymmetric_keys/x509_public_key.c           |  23 +-
 drivers/acpi/acpi_lpss.c                           |   7 +-
 drivers/acpi/acpica/aclocal.h                      |   1 +
 drivers/acpi/acpica/tbfadt.c                       |  21 +-
 drivers/acpi/acpica/tbutils.c                      |  34 +-
 drivers/acpi/acpica/tbxfload.c                     |   3 +-
 drivers/acpi/acpica/utxfinit.c                     |  10 +-
 drivers/acpi/osl.c                                 |  12 +-
 drivers/acpi/resource.c                            | 184 +---------
 drivers/ata/libata-core.c                          |  23 +-
 drivers/ata/libata-eh.c                            |  13 +-
 drivers/ata/libata-scsi.c                          |   3 +-
 drivers/ata/libata-transport.c                     |  24 ++
 drivers/base/firmware_class.c                      |  16 +-
 drivers/base/power/clock_ops.c                     |   2 +-
 drivers/block/loop.c                               |  30 +-
 drivers/block/loop.h                               |   1 +
 drivers/block/rbd.c                                |   4 +-
 drivers/bluetooth/btbcm.c                          |  11 +-
 drivers/bluetooth/btusb.c                          |  38 +-
 drivers/bus/arm-ccn.c                              |   2 +-
 drivers/char/agp/intel-gtt.c                       |   2 +-
 drivers/char/tpm/tpm-chip.c                        |   3 +-
 drivers/char/tpm/tpm_crb.c                         |  12 +-
 drivers/char/tpm/tpm_ibmvtpm.c                     |   5 +-
 drivers/clk/clk.c                                  |   5 +-
 drivers/clk/qcom/clk-rcg2.c                        |   9 +-
 drivers/clk/ti/clk-dra7-atl.c                      |   5 +
 drivers/clocksource/exynos_mct.c                   |  43 ++-
 drivers/dma/mv_xor.c                               |  72 ++--
 drivers/dma/mv_xor.h                               |   1 +
 drivers/edac/octeon_edac-l2c.c                     |   2 +-
 drivers/edac/octeon_edac-lmc.c                     |   2 +-
 drivers/edac/octeon_edac-pc.c                      |   2 +-
 drivers/firmware/dmi_scan.c                        |  13 +-
 drivers/gpu/drm/bridge/ptn3460.c                   |   1 +
 drivers/gpu/drm/drm_crtc.c                         |  12 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              |  67 +++-
 drivers/gpu/drm/drm_ioc32.c                        |  60 ++++
 drivers/gpu/drm/i915/i915_gem.c                    |   1 +
 drivers/gpu/drm/i915/i915_gem_gtt.c                |   6 +-
 drivers/gpu/drm/i915/i915_ioc32.c                  |   2 +-
 drivers/gpu/drm/i915/i915_irq.c                    |  13 +-
 drivers/gpu/drm/i915/i915_reg.h                    |   1 +
 drivers/gpu/drm/i915/intel_display.c               |  13 +
 drivers/gpu/drm/i915/intel_drv.h                   |   1 +
 drivers/gpu/drm/i915/intel_panel.c                 |   8 +
 drivers/gpu/drm/i915/intel_ringbuffer.h            |   7 +
 drivers/gpu/drm/i915/intel_uncore.c                |  26 +-
 drivers/gpu/drm/qxl/qxl_cmd.c                      |   1 +
 drivers/gpu/drm/qxl/qxl_ioctl.c                    |   4 +-
 drivers/gpu/drm/radeon/ci_dpm.c                    |   2 +-
 drivers/gpu/drm/radeon/cik.c                       | 370 +++++++++++--------
 drivers/gpu/drm/radeon/cik_sdma.c                  |  11 +
 drivers/gpu/drm/radeon/evergreen.c                 | 392 ++++++++++++---------
 drivers/gpu/drm/radeon/r600.c                      | 155 ++++----
 drivers/gpu/drm/radeon/radeon_audio.c              |  36 +-
 drivers/gpu/drm/radeon/radeon_audio.h              |   2 -
 drivers/gpu/drm/radeon/radeon_cursor.c             |  84 ++---
 drivers/gpu/drm/radeon/radeon_device.c             |  34 +-
 drivers/gpu/drm/radeon/radeon_fb.c                 |   1 -
 drivers/gpu/drm/radeon/radeon_gart.c               |  12 +-
 drivers/gpu/drm/radeon/radeon_gem.c                |   2 +
 drivers/gpu/drm/radeon/radeon_irq_kms.c            |   2 +
 drivers/gpu/drm/radeon/radeon_mode.h               |   1 -
 drivers/gpu/drm/radeon/radeon_object.c             |   1 -
 drivers/gpu/drm/radeon/si.c                        | 336 ++++++++++--------
 drivers/gpu/drm/radeon/si_dpm.c                    |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_gem.c        |  67 ++--
 drivers/gpu/drm/tegra/dpaux.c                      |  18 +-
 drivers/gpu/drm/vgem/vgem_drv.c                    |   2 +
 drivers/hwmon/mcp3021.c                            |  14 +-
 drivers/hwmon/nct7802.c                            |   2 +-
 drivers/i2c/busses/i2c-at91.c                      |  70 +++-
 drivers/i2c/i2c-mux.c                              |   3 +-
 drivers/i2c/muxes/i2c-mux-pca9541.c                |   4 +-
 drivers/i2c/muxes/i2c-mux-pca954x.c                |   2 +-
 drivers/iio/accel/bmc150-accel.c                   |   2 +-
 drivers/iio/adc/Kconfig                            |   3 +-
 drivers/iio/adc/at91_adc.c                         |   8 +-
 drivers/iio/adc/rockchip_saradc.c                  |   4 +
 drivers/iio/adc/twl4030-madc.c                     |   3 +-
 .../iio/common/hid-sensors/hid-sensor-trigger.c    |  11 +-
 drivers/iio/dac/ad5624r_spi.c                      |   4 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |  18 +
 drivers/iio/light/cm3323.c                         |   2 +-
 drivers/iio/light/tcs3414.c                        |   2 +-
 drivers/iio/proximity/sx9500.c                     |   2 +-
 drivers/iio/temperature/tmp006.c                   |   3 +
 drivers/infiniband/hw/ocrdma/ocrdma_verbs.c        |   1 -
 drivers/md/bitmap.c                                |  15 +-
 drivers/md/dm-cache-policy-cleaner.c               |   3 +-
 drivers/md/dm-cache-policy-internal.h              |   5 +-
 drivers/md/dm-cache-policy-mq.c                    |  41 ++-
 drivers/md/dm-cache-policy.h                       |  15 +-
 drivers/md/dm-cache-target.c                       |  58 +--
 drivers/md/dm-stats.c                              |   2 +
 drivers/md/dm-thin.c                               |  13 +-
 drivers/md/md.c                                    |   9 +-
 drivers/md/persistent-data/dm-btree-remove.c       |   6 +-
 drivers/md/persistent-data/dm-btree.c              |   2 +-
 drivers/md/persistent-data/dm-space-map-metadata.c |  50 ++-
 drivers/media/dvb-frontends/af9013.c               |   4 +
 drivers/media/dvb-frontends/cx24116.c              |   8 +-
 drivers/media/dvb-frontends/cx24117.c              |   2 +-
 drivers/media/dvb-frontends/s5h1420.c              |   2 +-
 drivers/media/pci/cx18/cx18-streams.c              |   1 +
 drivers/media/pci/saa7164/saa7164-encoder.c        |  11 +-
 drivers/media/pci/saa7164/saa7164-vbi.c            |  11 +-
 drivers/media/usb/dvb-usb/dib0700_core.c           |  70 ++--
 drivers/media/usb/dvb-usb/dib0700_devices.c        |   6 +
 drivers/media/v4l2-core/videobuf2-core.c           |  33 +-
 drivers/mmc/card/block.c                           |  10 +-
 drivers/mmc/host/sdhci.c                           |   9 +-
 drivers/net/ethernet/intel/e1000e/82571.c          |   2 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  10 +-
 drivers/net/ethernet/intel/e1000e/netdev.c         |  18 +-
 drivers/net/wireless/ath/ath9k/htc.h               |   6 +-
 drivers/net/wireless/ath/ath9k/main.c              |  12 +-
 drivers/net/wireless/iwlwifi/mvm/debugfs.c         |   5 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c        |   2 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h             |   1 +
 drivers/net/wireless/iwlwifi/mvm/time-event.c      |  15 +-
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c        |  16 -
 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c        |  17 -
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c        |  13 -
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c        |  17 -
 drivers/net/wireless/rtlwifi/rtl8821ae/hw.c        |  20 --
 drivers/nfc/st21nfcb/i2c.c                         |  10 -
 drivers/nfc/st21nfcb/st21nfcb.c                    |   3 -
 drivers/of/address.c                               |   2 +-
 drivers/of/base.c                                  |   2 +-
 drivers/phy/phy-berlin-usb.c                       |   4 +-
 drivers/phy/phy-twl4030-usb.c                      |   1 -
 drivers/pinctrl/mvebu/pinctrl-armada-370.c         |   4 +-
 drivers/pinctrl/mvebu/pinctrl-armada-375.c         |   4 +-
 drivers/pinctrl/mvebu/pinctrl-armada-38x.c         |  51 ++-
 drivers/pinctrl/mvebu/pinctrl-armada-39x.c         |   2 +-
 drivers/pinctrl/mvebu/pinctrl-armada-xp.c          |  37 +-
 drivers/pinctrl/pinctrl-zynq.c                     |  11 +-
 drivers/platform/x86/dell-laptop.c                 |   8 +-
 drivers/platform/x86/ideapad-laptop.c              |  10 +-
 drivers/pnp/system.c                               |  35 +-
 drivers/rtc/rtc-snvs.c                             |  30 +-
 drivers/staging/comedi/drivers/cb_pcimdas.c        |   8 +-
 drivers/staging/rtl8712/rtl8712_recv.c             |   3 +-
 drivers/staging/vt6655/device_main.c               |   6 +-
 drivers/staging/vt6656/main_usb.c                  |   2 +-
 drivers/tty/serial/Kconfig                         |   2 +-
 drivers/tty/serial/atmel_serial.c                  |   9 +-
 drivers/tty/sysrq.c                                |  19 +-
 drivers/usb/core/devio.c                           |   2 +-
 drivers/usb/core/hcd.c                             |   7 +-
 drivers/usb/core/hub.c                             |  84 ++---
 drivers/usb/core/usb.h                             |   1 +
 drivers/usb/dwc3/ep0.c                             |   4 +
 drivers/usb/dwc3/gadget.c                          |  10 +-
 drivers/usb/gadget/composite.c                     |  11 +-
 drivers/usb/gadget/function/f_fs.c                 |   6 +-
 drivers/usb/gadget/function/f_mass_storage.c       |  16 +-
 drivers/usb/gadget/udc/mv_udc_core.c               |   2 +-
 drivers/usb/host/ohci-q.c                          |   7 +-
 drivers/usb/host/xhci-mem.c                        |   2 +-
 drivers/usb/musb/musb_virthub.c                    |   4 +-
 drivers/usb/phy/phy-mxs-usb.c                      |   3 +
 drivers/usb/serial/cp210x.c                        |   1 +
 drivers/usb/serial/option.c                        |   1 +
 drivers/usb/serial/usb-serial.c                    |   1 +
 drivers/w1/slaves/w1_therm.c                       |  62 +++-
 drivers/watchdog/omap_wdt.c                        |   7 +
 fs/9p/vfs_inode.c                                  |   3 +-
 fs/9p/vfs_inode_dotl.c                             |   3 +-
 fs/btrfs/inode-map.c                               |  17 +-
 fs/btrfs/ioctl.c                                   |  22 +-
 fs/btrfs/transaction.c                             |   4 +-
 fs/btrfs/tree-log.c                                |  14 +-
 fs/ext4/extents.c                                  |   6 +-
 fs/ext4/indirect.c                                 |   2 +-
 fs/ext4/inode.c                                    |  45 ++-
 fs/ext4/mballoc.c                                  |  16 +-
 fs/ext4/migrate.c                                  |  17 +-
 fs/ext4/super.c                                    |   4 +
 fs/fuse/inode.c                                    |   2 +-
 fs/hpfs/super.c                                    |  18 +-
 fs/jbd2/checkpoint.c                               |   7 +-
 fs/jbd2/journal.c                                  |  38 +-
 fs/nfs/flexfilelayout/flexfilelayout.c             |   2 +-
 fs/nfs/flexfilelayout/flexfilelayoutdev.c          |   7 +-
 fs/nfs/nfs3xdr.c                                   |   2 +-
 fs/nfs/nfs4state.c                                 |   2 +
 fs/nfs/pnfs.c                                      |   3 +
 fs/nfs/write.c                                     |   1 +
 fs/overlayfs/readdir.c                             |  77 ++--
 fs/xfs/xfs_attr_inactive.c                         |  10 +-
 fs/xfs/xfs_symlink.c                               |   2 +-
 include/acpi/acpixf.h                              |  13 +-
 include/acpi/actypes.h                             |   1 +
 include/drm/drm_atomic.h                           |  24 +-
 include/drm/drm_crtc.h                             |   2 +
 include/drm/drm_dp_mst_helper.h                    |   4 +
 include/linux/acpi.h                               |  10 -
 include/linux/ata.h                                |   1 +
 include/linux/buffer_head.h                        |   7 +
 include/linux/compiler-intel.h                     |   2 +
 include/linux/gpio/consumer.h                      |  15 +
 include/linux/hid-sensor-hub.h                     |   1 +
 include/linux/jbd2.h                               |   4 +-
 include/linux/libata.h                             |   3 +
 include/linux/nfs_xdr.h                            |   2 +-
 include/linux/of.h                                 |   5 +-
 include/uapi/drm/i915_drm.h                        |   8 +
 kernel/power/Kconfig                               |   2 +-
 kernel/printk/printk.c                             |  11 +-
 kernel/trace/trace.h                               |   3 +-
 kernel/trace/trace_branch.c                        |  17 +-
 kernel/trace/trace_events_filter.c                 |  10 +-
 lib/bitmap.c                                       |  17 +-
 mm/hugetlb.c                                       |  19 +-
 net/9p/client.c                                    |   4 +-
 net/bluetooth/hci_sock.c                           |  26 +-
 net/ceph/osdmap.c                                  |   2 +-
 net/ieee802154/socket.c                            |   6 +
 net/mac80211/cfg.c                                 |   1 +
 net/mac80211/ibss.c                                |   1 +
 net/mac80211/main.c                                |   3 +
 net/mac80211/mesh.c                                |   1 +
 net/sunrpc/backchannel_rqst.c                      |   2 +-
 net/wireless/util.c                                |   2 +-
 samples/trace_events/trace-events-sample.h         |   7 +-
 security/integrity/evm/evm_main.c                  |  11 +
 security/integrity/ima/ima.h                       |   2 +-
 security/integrity/ima/ima_fs.c                    |   4 +-
 security/integrity/ima/ima_policy.c                | 124 +++++--
 security/integrity/ima/ima_template_lib.c          |   3 +-
 security/keys/keyring.c                            |   8 +-
 security/selinux/hooks.c                           |   3 +-
 security/selinux/ss/ebitmap.c                      |   6 +
 sound/soc/codecs/max98925.c                        |   2 +-
 sound/soc/codecs/rt5645.c                          |   4 +-
 sound/soc/codecs/tas2552.c                         |   4 +-
 sound/soc/codecs/wm5102.c                          |   2 +-
 sound/soc/codecs/wm5110.c                          |   2 +-
 sound/soc/codecs/wm8737.c                          |   6 +-
 sound/soc/codecs/wm8903.h                          |   2 +-
 sound/soc/codecs/wm8955.c                          |   2 +-
 sound/soc/codecs/wm8960.c                          |   2 +-
 sound/soc/codecs/wm8997.c                          |   2 +-
 sound/soc/fsl/imx-wm8962.c                         |   2 +-
 sound/soc/omap/Kconfig                             |   5 +-
 sound/soc/qcom/Kconfig                             |   2 -
 tools/perf/util/cloexec.c                          |   4 +
 281 files changed, 2866 insertions(+), 1964 deletions(-)
---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt |    4 ++--
 drivers/pinctrl/mvebu/pinctrl-armada-370.c                               |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
@@ -92,5 +92,5 @@ mpp61         61       gpo, dev(wen1), u
 mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
                        audio(mclk), uart0(cts)
 mpp63         63       gpo, spi0(sck), tclk
-mpp64         64       gpio, spi0(miso), spi0-1(cs1)
-mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
+mpp64         64       gpio, spi0(miso), spi0(cs1)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)

@@ -370,11 +370,11 @@ static struct mvebu_mpp_mode mv88f6710_m
 	MPP_MODE(64,
 	   MPP_FUNCTION(0x0, "gpio", NULL),
 	   MPP_FUNCTION(0x1, "spi0", "miso"),
-	   MPP_FUNCTION(0x2, "spi0-1", "cs1")),
+	   MPP_FUNCTION(0x2, "spi0", "cs1")),
 	MPP_MODE(65,
 	   MPP_FUNCTION(0x0, "gpio", NULL),
 	   MPP_FUNCTION(0x1, "spi0", "mosi"),
-	   MPP_FUNCTION(0x2, "spi0-1", "cs2")),
+	   MPP_FUNCTION(0x2, "spi0", "cs2")),
 };
 
 static struct mvebu_pinctrl_soc_info armada_370_pinctrl_info;

---
 drivers/pinctrl/mvebu/pinctrl-armada-375.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -92,7 +92,7 @@ static struct mvebu_mpp_mode mv88f6720_m
 		 MPP_FUNCTION(0x5, "nand", "io1")),
 	MPP_MODE(8,
 		 MPP_FUNCTION(0x0, "gpio", NULL),
-		 MPP_FUNCTION(0x1, "dev ", "bootcs"),
+		 MPP_FUNCTION(0x1, "dev", "bootcs"),
 		 MPP_FUNCTION(0x2, "spi0", "cs0"),
 		 MPP_FUNCTION(0x3, "spi1", "cs0"),
 		 MPP_FUNCTION(0x5, "nand", "ce")),

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt |    4 ++--
 drivers/pinctrl/mvebu/pinctrl-armada-375.c                               |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)
@@ -22,8 +22,8 @@ mpp5          5        gpio, dev(ad7), s
 mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
 mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
 mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
-mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
-mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
 mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
 mpp12        12        gpio, dev(a1), audio(bclk)
 mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)

@@ -98,13 +98,11 @@ static struct mvebu_mpp_mode mv88f6720_m
 		 MPP_FUNCTION(0x5, "nand", "ce")),
 	MPP_MODE(9,
 		 MPP_FUNCTION(0x0, "gpio", NULL),
-		 MPP_FUNCTION(0x1, "nf", "wen"),
 		 MPP_FUNCTION(0x2, "spi0", "sck"),
 		 MPP_FUNCTION(0x3, "spi1", "sck"),
 		 MPP_FUNCTION(0x5, "nand", "we")),
 	MPP_MODE(10,
 		 MPP_FUNCTION(0x0, "gpio", NULL),
-		 MPP_FUNCTION(0x1, "nf", "ren"),
 		 MPP_FUNCTION(0x2, "dram", "vttctrl"),
 		 MPP_FUNCTION(0x3, "led", "c1"),
 		 MPP_FUNCTION(0x5, "nand", "re"),

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt |   38 +++----
 drivers/pinctrl/mvebu/pinctrl-armada-38x.c                               |   49 ++++------
 2 files changed, 39 insertions(+), 48 deletions(-)
@@ -27,15 +27,15 @@ mpp8          8        gpio, ge0(txd1),
 mpp9          9        gpio, ge0(txd2), dev(ad11)
 mpp10         10       gpio, ge0(txd3), dev(ad12)
 mpp11         11       gpio, ge0(txctl), dev(ad13)
-mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
-mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
-mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
-mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
-mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
 mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
-mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
-mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
-mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
+mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0)
+mpp19         19       gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
 mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
 mpp22         22       gpio, spi0(mosi), dev(ad0)
 mpp23         23       gpio, spi0(sck), dev(ad2)

@@ -58,23 +58,23 @@ mpp39         39       gpio, i2c1(sck),
 mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
 mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
 mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
-mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
-mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
-mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
-mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
-mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
+mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50         50       gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd)
 mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
-mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
+mpp52         52       gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6)
 mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
-mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
 mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
 mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
 mpp57         57       gpio, spi1(sck), sd0(clk)
 mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
-mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
 [1]: only available on 88F6820 and 88F6828
 [2]: only available on 88F6828

---
 drivers/pinctrl/mvebu/pinctrl-armada-38x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -402,7 +402,7 @@ static struct mvebu_mpp_ctrl armada_38x_
 
 static struct pinctrl_gpio_range armada_38x_mpp_gpio_ranges[] = {
 	MPP_GPIO_RANGE(0,   0,  0, 32),
-	MPP_GPIO_RANGE(1,  32, 32, 27),
+	MPP_GPIO_RANGE(1,  32, 32, 28),
 };
 
 static int armada_38x_pinctrl_probe(struct platform_device *pdev)

---
 drivers/pinctrl/mvebu/pinctrl-armada-39x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -380,7 +380,7 @@ static struct mvebu_mpp_ctrl armada_39x_
 
 static struct pinctrl_gpio_range armada_39x_mpp_gpio_ranges[] = {
 	MPP_GPIO_RANGE(0,   0,  0, 32),
-	MPP_GPIO_RANGE(1,  32, 32, 27),
+	MPP_GPIO_RANGE(1,  32, 32, 28),
 };
 
 static int armada_39x_pinctrl_probe(struct platform_device *pdev)

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt |    4 ++--
 drivers/pinctrl/mvebu/pinctrl-armada-xp.c                               |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)
@@ -42,8 +42,8 @@ mpp20         20       gpio, ge0(rxd4),
 mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
 mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
-mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
-mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
 mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)

@@ -172,13 +172,11 @@ static struct mvebu_mpp_mode armada_xp_m
 	MPP_MODE(24,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sata1", "prsnt",    V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-re",   V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "tdm", "rst",        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x4, "lcd", "hsync",      V_MV78230_PLUS)),
 	MPP_MODE(25,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sata0", "prsnt",    V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x2, "nf", "bootcs-we",   V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "tdm", "pclk",       V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x4, "lcd", "vsync",      V_MV78230_PLUS)),
 	MPP_MODE(26,

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt |   26 +++----
 drivers/pinctrl/mvebu/pinctrl-armada-xp.c                               |   33 +++-------
 2 files changed, 20 insertions(+), 39 deletions(-)
@@ -44,13 +44,13 @@ mpp22         22       gpio, ge0(rxd6),
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
 mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
 mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
-mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
 mpp30         30       gpio, tdm(int1), sd0(clk)
-mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
-mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
 mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
 mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
 mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)

@@ -58,14 +58,11 @@ mpp36         36       gpio, spi(mosi)
 mpp37         37       gpio, spi(miso)
 mpp38         38       gpio, spi(sck)
 mpp39         39       gpio, spi(cs0)
-mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
-                       pcie(clkreq0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0)
 mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
                        pcie(clkreq1)
-mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
-                       vdd(cpu0-pd)
-mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
-                       vdd(cpu2-3-pd){1}
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout)
 mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
                        mem(bat)
 mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)

@@ -84,9 +81,9 @@ mpp51         51       gpio, dev(ad16)
 mpp52         52       gpio, dev(ad17)
 mpp53         53       gpio, dev(ad18)
 mpp54         54       gpio, dev(ad19)
-mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
-mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
-mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp55         55       gpio, dev(ad20)
+mpp56         56       gpio, dev(ad21)
+mpp57         57       gpio, dev(ad22)
 mpp58         58       gpio, dev(ad23)
 mpp59         59       gpio, dev(ad24)
 mpp60         60       gpio, dev(ad25)

@@ -96,6 +93,3 @@ mpp63         63       gpio, dev(ad28)
 mpp64         64       gpio, dev(ad29)
 mpp65         65       gpio, dev(ad30)
 mpp66         66       gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.

@@ -14,10 +14,7 @@
  * available: mv78230, mv78260 and mv78460. From a pin muxing
  * perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460
  * both have 67 MPP pins (more GPIOs and address lines for the memory
- * bus mainly). The only difference between the mv78260 and the
- * mv78460 in terms of pin muxing is the addition of two functions on
- * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two
- * cores, mv78460 has four cores).
+ * bus mainly).
  */
 
 #include <linux/err.h>

@@ -182,8 +179,7 @@ static struct mvebu_mpp_mode armada_xp_m
 	MPP_MODE(26,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "tdm", "fsync",      V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "lcd", "clk",        V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "clk",        V_MV78230_PLUS)),
 	MPP_MODE(27,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "ptp", "trig",       V_MV78230_PLUS),

@@ -198,8 +194,7 @@ static struct mvebu_mpp_mode armada_xp_m
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "ptp", "clk",        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "tdm", "int0",       V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk",    V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+		 MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk",    V_MV78230_PLUS)),
 	MPP_MODE(30,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sd0", "clk",        V_MV78230_PLUS),

@@ -207,13 +202,11 @@ static struct mvebu_mpp_mode armada_xp_m
 	MPP_MODE(31,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sd0", "cmd",        V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x3, "tdm", "int2",       V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int2",       V_MV78230_PLUS)),
 	MPP_MODE(32,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sd0", "d0",         V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x3, "tdm", "int3",       V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd",    V_MV78230_PLUS)),
+		 MPP_VAR_FUNCTION(0x3, "tdm", "int3",       V_MV78230_PLUS)),
 	MPP_MODE(33,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "sd0", "d1",         V_MV78230_PLUS),

@@ -245,7 +238,6 @@ static struct mvebu_mpp_mode armada_xp_m
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "spi", "cs1",        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x2, "uart2", "cts",      V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd",    V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync",  V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0",   V_MV78230_PLUS)),
 	MPP_MODE(41,

@@ -260,15 +252,13 @@ static struct mvebu_mpp_mode armada_xp_m
 		 MPP_VAR_FUNCTION(0x1, "uart2", "rxd",      V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x2, "uart0", "cts",      V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "tdm", "int7",       V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "tdm-1", "timer",    V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd",    V_MV78230_PLUS)),
+		 MPP_VAR_FUNCTION(0x4, "tdm-1", "timer",    V_MV78230_PLUS)),
 	MPP_MODE(43,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "uart2", "txd",      V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x2, "uart0", "rts",      V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x3, "spi", "cs3",        V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "pcie", "rstout",    V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd",  V_MV78460)),
+		 MPP_VAR_FUNCTION(0x4, "pcie", "rstout",    V_MV78230_PLUS)),
 	MPP_MODE(44,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "uart2", "cts",      V_MV78230_PLUS),

@@ -319,16 +309,13 @@ static struct mvebu_mpp_mode armada_xp_m
 		 MPP_VAR_FUNCTION(0x1, "dev", "ad19",       V_MV78260_PLUS)),
 	MPP_MODE(55,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x1, "dev", "ad20",       V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd",    V_MV78260_PLUS)),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad20",       V_MV78260_PLUS)),
 	MPP_MODE(56,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x1, "dev", "ad21",       V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd",    V_MV78260_PLUS)),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad21",       V_MV78260_PLUS)),
 	MPP_MODE(57,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x1, "dev", "ad22",       V_MV78260_PLUS),
-		 MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd",  V_MV78460)),
+		 MPP_VAR_FUNCTION(0x1, "dev", "ad22",       V_MV78260_PLUS)),
 	MPP_MODE(58,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),
 		 MPP_VAR_FUNCTION(0x1, "dev", "ad23",       V_MV78260_PLUS)),

---
 Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt |    2 +-
 drivers/pinctrl/mvebu/pinctrl-armada-xp.c                               |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
@@ -69,7 +69,7 @@ mpp45         45       gpio, uart2(rts),
 mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
 mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
                        ref(clkout)
-mpp48         48       gpio, tclk, dev(burst/last)
+mpp48         48       gpio, dev(clkout), dev(burst/last)
 
 * Marvell Armada XP (mv78260 and mv78460 only)
 

@@ -287,7 +287,7 @@ static struct mvebu_mpp_mode armada_xp_m
 		 MPP_VAR_FUNCTION(0x5, "pcie", "clkreq3",   V_MV78230_PLUS)),
 	MPP_MODE(48,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78230_PLUS),
-		 MPP_VAR_FUNCTION(0x1, "tclk", NULL,        V_MV78230_PLUS),
+		 MPP_VAR_FUNCTION(0x1, "dev", "clkout",     V_MV78230_PLUS),
 		 MPP_VAR_FUNCTION(0x2, "dev", "burst/last", V_MV78230_PLUS)),
 	MPP_MODE(49,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,        V_MV78260_PLUS),

---
 arch/openrisc/Kconfig |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
@@ -17,6 +17,7 @@ config OPENRISC
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IOMAP
 	select GENERIC_CPU_DEVICES
+	select HAVE_UID16
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_STRNCPY_FROM_USER

@@ -31,9 +32,6 @@ config MMU
 config HAVE_DMA_ATTRS
 	def_bool y
 
-config UID16
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 

---
 arch/m68k/Kconfig.cpu |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
@@ -125,6 +125,13 @@ endif # M68KCLASSIC
 
 if COLDFIRE
 
+choice
+	prompt "ColdFire SoC type"
+	default M520x
+	help
+	  Select the type of ColdFire System-on-Chip (SoC) that you want
+	  to build for.
+
 config M5206
 	bool "MCF5206"
 	depends on !MMU

@@ -174,9 +181,6 @@ config M525x
 	help
 	  Freescale (Motorola) Coldfire 5251/5253 processor support.
 
-config M527x
-	bool
-
 config M5271
 	bool "MCF5271"
 	depends on !MMU

@@ -223,9 +227,6 @@ config M5307
 	help
 	  Motorola ColdFire 5307 processor support.
 
-config M53xx
-	bool
-
 config M532x
 	bool "MCF532x"
 	depends on !MMU

@@ -251,9 +252,6 @@ config M5407
 	help
 	  Motorola ColdFire 5407 processor support.
 
-config M54xx
-	bool
-
 config M547x
 	bool "MCF547x"
 	select M54xx

@@ -280,6 +278,17 @@ config M5441x
 	help
 	  Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
 
+endchoice
+
+config M527x
+	bool
+
+config M53xx
+	bool
+
+config M54xx
+	bool
+
 endif # COLDFIRE
 
 

                 from include/linux/timex.h:65,
                 from include/linux/sched.h:19,
                 from arch/m68k/kernel/asm-offsets.c:14:
---
 arch/m68k/Kconfig.cpu            |   14 +-------------
 arch/m68k/include/asm/coldfire.h |    2 +-
 2 files changed, 2 insertions(+), 14 deletions(-)
@@ -425,22 +425,10 @@ config HAVE_MBAR
 config HAVE_IPSBAR
 	bool
 
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	depends on COLDFIRE
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
 config CLOCK_FREQ
 	int "Set the core clock frequency"
 	default "66666666"
-	depends on CLOCK_SET
+	depends on COLDFIRE
 	help
 	  Define the CPU clock frequency in use. This is the core clock
 	  frequency, it may or may not be the same as the external clock

@@ -19,7 +19,7 @@
  *	in any case new boards come along from time to time that have yet
  *	another different clocking frequency.
  */
-#ifdef CONFIG_CLOCK_SET
+#ifdef CONFIG_CLOCK_FREQ
 #define	MCF_CLK		CONFIG_CLOCK_FREQ
 #else
 #error "Don't know what your ColdFire CPU clock frequency is??"

---
 net/bluetooth/hci_sock.c |   26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
@@ -741,10 +741,11 @@ static int hci_sock_bind(struct socket *
 			goto done;
 		}
 
-		if (test_bit(HCI_UP, &hdev->flags) ||
-		    test_bit(HCI_INIT, &hdev->flags) ||
+		if (test_bit(HCI_INIT, &hdev->flags) ||
 		    hci_dev_test_flag(hdev, HCI_SETUP) ||
-		    hci_dev_test_flag(hdev, HCI_CONFIG)) {
+		    hci_dev_test_flag(hdev, HCI_CONFIG) ||
+		    (!hci_dev_test_flag(hdev, HCI_AUTO_OFF) &&
+		     test_bit(HCI_UP, &hdev->flags))) {
 			err = -EBUSY;
 			hci_dev_put(hdev);
 			goto done;

@@ -760,10 +761,21 @@ static int hci_sock_bind(struct socket *
 
 		err = hci_dev_open(hdev->id);
 		if (err) {
-			hci_dev_clear_flag(hdev, HCI_USER_CHANNEL);
-			mgmt_index_added(hdev);
-			hci_dev_put(hdev);
-			goto done;
+			if (err == -EALREADY) {
+				/* In case the transport is already up and
+				 * running, clear the error here.
+				 *
+				 * This can happen when opening an user
+				 * channel and HCI_AUTO_OFF grace period
+				 * is still active.
+				 */
+				err = 0;
+			} else {
+				hci_dev_clear_flag(hdev, HCI_USER_CHANNEL);
+				mgmt_index_added(hdev);
+				hci_dev_put(hdev);
+				goto done;
+			}
 		}
 
 		atomic_inc(&hdev->promisc);

---
 drivers/bluetooth/btusb.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -1993,6 +1993,8 @@ static int btusb_setup_intel(struct hci_
 	}
 	fw_ptr = fw->data;
 
+	kfree_skb(skb);
+
 	/* This Intel specific command enables the manufacturer mode of the
 	 * controller.
 	 *

---
 drivers/bluetooth/btusb.c |   34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)
@@ -2336,6 +2336,7 @@ static int btusb_setup_intel_new(struct
 	struct intel_boot_params *params;
 	const struct firmware *fw;
 	const u8 *fw_ptr;
+	u32 frag_len;
 	char fwname[64];
 	ktime_t calltime, delta, rettime;
 	unsigned long long duration;

@@ -2542,24 +2543,33 @@ static int btusb_setup_intel_new(struct
 	}
 
 	fw_ptr = fw->data + 644;
+	frag_len = 0;
 
 	while (fw_ptr - fw->data < fw->size) {
-		struct hci_command_hdr *cmd = (void *)fw_ptr;
-		u8 cmd_len;
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		cmd_len = sizeof(*cmd) + cmd->plen;
+		frag_len += sizeof(*cmd) + cmd->plen;
 
-		/* Send each command from the firmware data buffer as
-		 * a single Data fragment.
+		/* The paramter length of the secure send command requires
+		 * a 4 byte alignment. It happens so that the firmware file
+		 * contains proper Intel_NOP commands to align the fragments
+		 * as needed.
+		 *
+		 * Send set of commands with 4 byte alignment from the
+		 * firmware data buffer as a single Data fragement.
 		 */
-		err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
-		if (err < 0) {
-			BT_ERR("%s: Failed to send firmware data (%d)",
-			       hdev->name, err);
-			goto done;
-		}
+		if (!(frag_len % 4)) {
+			err = btusb_intel_secure_send(hdev, 0x01, frag_len,
+						      fw_ptr);
+			if (err < 0) {
+				BT_ERR("%s: Failed to send firmware data (%d)",
+				       hdev->name, err);
+				goto done;
+			}
 
-		fw_ptr += cmd_len;
+			fw_ptr += frag_len;
+			frag_len = 0;
+		}
 	}
 
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1310 ProdID=0001 Rev=15.00
S:  Manufacturer=SiW
S:  Product=SiW
S:  SerialNumber=E7BB050D0B00
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
---
 drivers/bluetooth/btusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -268,7 +268,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
 
 	/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
-	{ USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
+	{ USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
 
 	/* Digianswer devices */
 	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },

---
 drivers/bluetooth/btbcm.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
@@ -378,12 +378,11 @@ int btbcm_setup_apple(struct hci_dev *hd
 
 	/* Read Verbose Config Version Info */
 	skb = btbcm_read_verbose_config(hdev);
-	if (IS_ERR(skb))
-		return PTR_ERR(skb);
-
-	BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
-		get_unaligned_le16(skb->data + 5));
-	kfree_skb(skb);
+	if (!IS_ERR(skb)) {
+		BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
+			get_unaligned_le16(skb->data + 5));
+		kfree_skb(skb);
+	}
 
 	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 

---
 drivers/net/wireless/ath/ath9k/main.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
@@ -216,11 +216,13 @@ static bool ath_prepare_reset(struct ath
 	ath_stop_ani(sc);
 	ath9k_hw_disable_interrupts(ah);
 
-	if (!ath_drain_all_txq(sc))
-		ret = false;
-
-	if (!ath_stoprecv(sc))
-		ret = false;
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		ret &= ath_stoprecv(sc);
+		ret &= ath_drain_all_txq(sc);
+	} else {
+		ret &= ath_drain_all_txq(sc);
+		ret &= ath_stoprecv(sc);
+	}
 
 	return ret;
 }

	set_bit(OP_TSF_RESET, &priv->op_flags);
---
 drivers/net/wireless/ath/ath9k/htc.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
@@ -440,9 +440,9 @@ static inline void ath9k_htc_stop_btcoex
 }
 #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
 
-#define OP_BT_PRIORITY_DETECTED    BIT(3)
-#define OP_BT_SCAN                 BIT(4)
-#define OP_TSF_RESET               BIT(6)
+#define OP_BT_PRIORITY_DETECTED    3
+#define OP_BT_SCAN                 4
+#define OP_TSF_RESET               6
 
 enum htc_op_flags {
 	HTC_FWFLAG_NO_RMW,

---
 drivers/net/wireless/rtlwifi/rtl8188ee/hw.c |   16 ----------------
 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c |   17 -----------------
 drivers/net/wireless/rtlwifi/rtl8723ae/hw.c |   13 -------------
 drivers/net/wireless/rtlwifi/rtl8723be/hw.c |   17 -----------------
 drivers/net/wireless/rtlwifi/rtl8821ae/hw.c |   20 --------------------
 5 files changed, 83 deletions(-)
@@ -1354,27 +1354,11 @@ void rtl88ee_set_qos(struct ieee80211_hw
 	}
 }
 
-static void rtl88ee_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl88ee_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl88ee_clear_interrupt(hw);/*clear it here first*/
 	rtl_write_dword(rtlpriv, REG_HIMR,
 			rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE,

@@ -1584,28 +1584,11 @@ void rtl92ee_set_qos(struct ieee80211_hw
 	}
 }
 
-static void rtl92ee_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl92ee_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl92ee_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;

@@ -1258,18 +1258,6 @@ void rtl8723e_set_qos(struct ieee80211_h
 	}
 }
 
-static void rtl8723e_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-}
-
 void rtl8723e_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);

@@ -1284,7 +1272,6 @@ void rtl8723e_disable_interrupt(struct i
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	rtl8723e_clear_interrupt(hw);/*clear it here first*/
 	rtl_write_dword(rtlpriv, 0x3a8, IMR8190_DISABLED);
 	rtl_write_dword(rtlpriv, 0x3ac, IMR8190_DISABLED);
 	rtlpci->irq_enabled = false;

@@ -1634,28 +1634,11 @@ void rtl8723be_set_qos(struct ieee80211_
 	}
 }
 
-static void rtl8723be_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl8723be_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl8723be_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;

@@ -2253,31 +2253,11 @@ void rtl8821ae_set_qos(struct ieee80211_
 	}
 }
 
-static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	u32 tmp;
-	tmp = rtl_read_dword(rtlpriv, REG_HISR);
-	/*printk("clear interrupt first:\n");
-	printk("0x%x = 0x%08x\n",REG_HISR, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HISR, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HISRE);
-	/*printk("0x%x = 0x%08x\n",REG_HISRE, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HISRE, tmp);
-
-	tmp = rtl_read_dword(rtlpriv, REG_HSISR);
-	/*printk("0x%x = 0x%08x\n",REG_HSISR, tmp);*/
-	rtl_write_dword(rtlpriv, REG_HSISR, tmp);
-}
-
 void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 
-	rtl8821ae_clear_interrupt(hw);/*clear it here first*/
-
 	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
 	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
 	rtlpci->irq_enabled = true;

	struct sockaddr_ieee802154 {
		sa_family_t family; /* AF_IEEE802154 */
		struct ieee802154_addr_sa addr;
	};

	struct ieee802154_addr_sa {
		int addr_type;
		u16 pan_id;
		union {
			u8 hwaddr[IEEE802154_ADDR_LEN];
			u16 short_addr;
		};
	};
---
 net/ieee802154/socket.c |    6 ++++++
 1 file changed, 6 insertions(+)
@@ -739,6 +739,12 @@ static int dgram_recvmsg(struct sock *sk
 	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (saddr) {
+		/* Clear the implicit padding in struct sockaddr_ieee802154
+		 * (16 bits between 'family' and 'addr') and in struct
+		 * ieee802154_addr_sa (16 bits at the end of the structure).
+		 */
+		memset(saddr, 0, sizeof(*saddr));
+
 		saddr->family = AF_IEEE802154;
 		ieee802154_addr_to_sa(&saddr->addr, &mac_cb(skb)->source);
 		*addr_len = sizeof(*saddr);

---
 drivers/staging/vt6656/main_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -701,7 +701,7 @@ static void vnt_bss_info_changed(struct
 
 	priv->current_aid = conf->aid;
 
-	if (changed & BSS_CHANGED_BSSID)
+	if (changed & BSS_CHANGED_BSSID && conf->bssid)
 		vnt_mac_set_bssid_addr(priv, (u8 *)conf->bssid);
 
 

---
 drivers/staging/vt6655/device_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -1417,7 +1417,7 @@ static void vnt_bss_info_changed(struct
 
 	priv->current_aid = conf->aid;
 
-	if (changed & BSS_CHANGED_BSSID) {
+	if (changed & BSS_CHANGED_BSSID && conf->bssid) {
 		unsigned long flags;
 
 		spin_lock_irqsave(&priv->lock, flags);

---
 drivers/staging/vt6655/device_main.c |    4 ++++
 1 file changed, 4 insertions(+)
@@ -807,6 +807,10 @@ static int device_rx_srv(struct vnt_priv
 	     pRD = pRD->next) {
 		if (works++ > 15)
 			break;
+
+		if (!pRD->pRDInfo->skb)
+			break;
+
 		if (vnt_receive_frame(pDevice, pRD)) {
 			if (!device_alloc_rx_buf(pDevice, pRD)) {
 				dev_err(&pDevice->pcid->dev,

---
 drivers/staging/rtl8712/rtl8712_recv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
@@ -1056,7 +1056,8 @@ static int recvbuf2recvframe(struct _ada
 		/* for first fragment packet, driver need allocate 1536 +
 		 * drvinfo_sz + RXDESC_SIZE to defrag packet. */
 		if ((mf == 1) && (frag == 0))
-			alloc_sz = 1658;/*1658+6=1664, 1664 is 128 alignment.*/
+			/*1658+6=1664, 1664 is 128 alignment.*/
+			alloc_sz = max_t(u16, tmp_len, 1658);
 		else
 			alloc_sz = tmp_len;
 		/* 2 is for IP header 4 bytes alignment in QoS packet case.

---
 drivers/staging/comedi/drivers/cb_pcimdas.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
@@ -243,7 +243,7 @@ static int cb_pcimdas_ao_insn_write(stru
 	return insn->n;
 }
 
-static int cb_pcimdas_di_insn_read(struct comedi_device *dev,
+static int cb_pcimdas_di_insn_bits(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
 				   struct comedi_insn *insn,
 				   unsigned int *data)

@@ -258,7 +258,7 @@ static int cb_pcimdas_di_insn_read(struc
 	return insn->n;
 }
 
-static int cb_pcimdas_do_insn_write(struct comedi_device *dev,
+static int cb_pcimdas_do_insn_bits(struct comedi_device *dev,
 				    struct comedi_subdevice *s,
 				    struct comedi_insn *insn,
 				    unsigned int *data)

@@ -424,7 +424,7 @@ static int cb_pcimdas_auto_attach(struct
 	s->n_chan	= 4;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
-	s->insn_read	= cb_pcimdas_di_insn_read;
+	s->insn_bits	= cb_pcimdas_di_insn_bits;
 
 	/* Digital Output subdevice (main connector) */
 	s = &dev->subdevices[4];

@@ -433,7 +433,7 @@ static int cb_pcimdas_auto_attach(struct
 	s->n_chan	= 4;
 	s->maxdata	= 1;
 	s->range_table	= &range_digital;
-	s->insn_write	= cb_pcimdas_do_insn_write;
+	s->insn_bits	= cb_pcimdas_do_insn_bits;
 
 	/* Counter subdevice (8254) */
 	s = &dev->subdevices[5];

---
 drivers/iio/common/hid-sensors/hid-sensor-trigger.c |   11 ++++++++++-
 include/linux/hid-sensor-hub.h                      |    1 +
 2 files changed, 11 insertions(+), 1 deletion(-)
@@ -36,6 +36,8 @@ static int _hid_sensor_power_state(struc
 	s32 poll_value = 0;
 
 	if (state) {
+		if (!atomic_read(&st->user_requested_state))
+			return 0;
 		if (sensor_hub_device_open(st->hsdev))
 			return -EIO;
 

@@ -52,8 +54,12 @@ static int _hid_sensor_power_state(struc
 
 		poll_value = hid_sensor_read_poll_value(st);
 	} else {
-		if (!atomic_dec_and_test(&st->data_ready))
+		int val;
+
+		val = atomic_dec_if_positive(&st->data_ready);
+		if (val < 0)
 			return 0;
+
 		sensor_hub_device_close(st->hsdev);
 		state_val = hid_sensor_get_usage_index(st->hsdev,
 			st->power_state.report_id,

@@ -92,9 +98,11 @@ EXPORT_SYMBOL(hid_sensor_power_state);
 
 int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 {
+
 #ifdef CONFIG_PM
 	int ret;
 
+	atomic_set(&st->user_requested_state, state);
 	if (state)
 		ret = pm_runtime_get_sync(&st->pdev->dev);
 	else {

@@ -109,6 +117,7 @@ int hid_sensor_power_state(struct hid_se
 
  	return 0;
 #else
+	atomic_set(&st->user_requested_state, state);
 	return _hid_sensor_power_state(st, state);
 #endif
 }

@@ -230,6 +230,7 @@ struct hid_sensor_common {
 	struct platform_device *pdev;
 	unsigned usage_id;
 	atomic_t data_ready;
+	atomic_t user_requested_state;
 	struct iio_trigger *trigger;
 	struct hid_sensor_hub_attribute_info poll;
 	struct hid_sensor_hub_attribute_info report_state;

    ...
Call Trace:
 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
 [<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117
 [<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
 [<c027d883>] ? lock_buffer+0x36/0x36
 [<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22
 [<c0229139>] do_invalidatepage+0x22/0x26
 [<c0229198>] truncate_inode_page+0x5b/0x85
 [<c022934b>] truncate_inode_pages_range+0x156/0x38c
 [<c0229592>] truncate_inode_pages+0x11/0x15
 [<c022962d>] truncate_pagecache+0x55/0x71
 [<c02b913b>] ext4_setattr+0x4a9/0x560
 [<c01ca542>] ? current_kernel_time+0x10/0x44
 [<c026c4d8>] notify_change+0x1c7/0x2be
 [<c0256a00>] do_truncate+0x65/0x85
 [<c0226f31>] ? file_ra_state_init+0x12/0x29
WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396
irty_metadata+0x14a/0x1ae()
    ...
Call Trace:
 [<c01b879f>] ? console_unlock+0x3a1/0x3ce
 [<c082cbb4>] dump_stack+0x48/0x60
 [<c0178b65>] warn_slowpath_common+0x89/0xa0
 [<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae
 [<c0178bef>] warn_slowpath_null+0x14/0x18
 [<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae
 [<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d
 [<c02b2f44>] write_end_fn+0x40/0x53
 [<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a
 [<c02b59e7>] ext4_writepage+0x354/0x3b8
 [<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4
 [<c02b1b21>] ? wait_on_buffer+0x2c/0x2c
 [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
 [<c02b5a5b>] __writepage+0x10/0x2e
 [<c0225956>] write_cache_pages+0x22d/0x32c
 [<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
 [<c02b6ee8>] ext4_writepages+0x102/0x607
 [<c019adfe>] ? sched_clock_local+0x10/0x10e
 [<c01a8a7c>] ? __lock_is_held+0x2e/0x44
 [<c01a8ad5>] ? lock_is_held+0x43/0x51
 [<c0226dff>] do_writepages+0x1c/0x29
 [<c0276bed>] __writeback_single_inode+0xc3/0x545
 [<c0277c07>] writeback_sb_inodes+0x21f/0x36d
    ...
---
 fs/ext4/inode.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
@@ -1701,19 +1701,32 @@ static int __ext4_journalled_writepage(s
 		ext4_walk_page_buffers(handle, page_bufs, 0, len,
 				       NULL, bget_one);
 	}
-	/* As soon as we unlock the page, it can go away, but we have
-	 * references to buffers so we are safe */
+	/*
+	 * We need to release the page lock before we start the
+	 * journal, so grab a reference so the page won't disappear
+	 * out from under us.
+	 */
+	get_page(page);
 	unlock_page(page);
 
 	handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE,
 				    ext4_writepage_trans_blocks(inode));
 	if (IS_ERR(handle)) {
 		ret = PTR_ERR(handle);
-		goto out;
+		put_page(page);
+		goto out_no_pagelock;
 	}
-
 	BUG_ON(!ext4_handle_valid(handle));
 
+	lock_page(page);
+	put_page(page);
+	if (page->mapping != mapping) {
+		/* The page got truncated from under us */
+		ext4_journal_stop(handle);
+		ret = 0;
+		goto out;
+	}
+
 	if (inline_data) {
 		BUFFER_TRACE(inode_bh, "get write access");
 		ret = ext4_journal_get_write_access(handle, inode_bh);

@@ -1739,6 +1752,8 @@ static int __ext4_journalled_writepage(s
 				       NULL, bput_one);
 	ext4_set_inode_state(inode, EXT4_STATE_JDATA);
 out:
+	unlock_page(page);
+out_no_pagelock:
 	brelse(inode_bh);
 	return ret;
 }

WARNING: CPU: 1 PID: 3473 at /usr/projects/linux/ext4/fs/block_dev.c:56 __blkdev_put+0xb5/0x16f()
---
 fs/ext4/super.c |    1 +
 1 file changed, 1 insertion(+)
@@ -807,6 +807,7 @@ static void ext4_put_super(struct super_
 		dump_orphan_list(sb, sbi);
 	J_ASSERT(list_empty(&sbi->s_orphan));
 
+	sync_blockdev(sb->s_bdev);
 	invalidate_bdev(sb->s_bdev);
 	if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
 		/*

---
 fs/ext4/indirect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -565,7 +565,7 @@ int ext4_ind_map_blocks(handle_t *handle
 				       EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
 		EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
 				 "non-extent mapped inodes with bigalloc");
-		return -ENOSPC;
+		return -EUCLEAN;
 	}
 
 	/* Set up for the direct block allocation */

---
 fs/ext4/super.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -4944,6 +4944,9 @@ static int ext4_remount(struct super_blo
 		set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
 	}
 
+	if (*flags & MS_LAZYTIME)
+		sb->s_flags |= MS_LAZYTIME;
+
 	if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) {
 		if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) {
 			err = -EROFS;

---
 fs/ext4/inode.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
@@ -4360,7 +4360,12 @@ static void ext4_update_other_inodes_tim
 	int inode_size = EXT4_INODE_SIZE(sb);
 
 	oi.orig_ino = orig_ino;
-	ino = (orig_ino & ~(inodes_per_block - 1)) + 1;
+	/*
+	 * Calculate the first inode in the inode table block.  Inode
+	 * numbers are one-based.  That is, the first inode in a block
+	 * (assuming 4k blocks and 256 byte inodes) is (n*16 + 1).
+	 */
+	ino = ((orig_ino - 1) & ~(inodes_per_block - 1)) + 1;
 	for (i = 0; i < inodes_per_block; i++, ino++, buf += inode_size) {
 		if (ino == orig_ino)
 			continue;

---
 include/linux/buffer_head.h |    7 +++++++
 1 file changed, 7 insertions(+)
@@ -317,6 +317,13 @@ sb_getblk(struct super_block *sb, sector
 	return __getblk_gfp(sb->s_bdev, block, sb->s_blocksize, __GFP_MOVABLE);
 }
 
+
+static inline struct buffer_head *
+sb_getblk_gfp(struct super_block *sb, sector_t block, gfp_t gfp)
+{
+	return __getblk_gfp(sb->s_bdev, block, sb->s_blocksize, gfp);
+}
+
 static inline struct buffer_head *
 sb_find_get_block(struct super_block *sb, sector_t block)
 {

---
 fs/ext4/extents.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
@@ -503,7 +503,7 @@ __read_extent_tree_block(const char *fun
 	struct buffer_head		*bh;
 	int				err;
 
-	bh = sb_getblk(inode->i_sb, pblk);
+	bh = sb_getblk_gfp(inode->i_sb, pblk, __GFP_MOVABLE | GFP_NOFS);
 	if (unlikely(!bh))
 		return ERR_PTR(-ENOMEM);
 

@@ -1088,7 +1088,7 @@ static int ext4_ext_split(handle_t *hand
 		err = -EIO;
 		goto cleanup;
 	}
-	bh = sb_getblk(inode->i_sb, newblock);
+	bh = sb_getblk_gfp(inode->i_sb, newblock, __GFP_MOVABLE | GFP_NOFS);
 	if (unlikely(!bh)) {
 		err = -ENOMEM;
 		goto cleanup;

@@ -1282,7 +1282,7 @@ static int ext4_ext_grow_indepth(handle_
 	if (newblock == 0)
 		return err;
 
-	bh = sb_getblk(inode->i_sb, newblock);
+	bh = sb_getblk_gfp(inode->i_sb, newblock, __GFP_MOVABLE | GFP_NOFS);
 	if (unlikely(!bh))
 		return -ENOMEM;
 	lock_buffer(bh);

---
 fs/ext4/inode.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
@@ -1342,7 +1342,7 @@ static void ext4_da_page_release_reserva
 					     unsigned int offset,
 					     unsigned int length)
 {
-	int to_release = 0;
+	int to_release = 0, contiguous_blks = 0;
 	struct buffer_head *head, *bh;
 	unsigned int curr_off = 0;
 	struct inode *inode = page->mapping->host;

@@ -1363,14 +1363,23 @@ static void ext4_da_page_release_reserva
 
 		if ((offset <= curr_off) && (buffer_delay(bh))) {
 			to_release++;
+			contiguous_blks++;
 			clear_buffer_delay(bh);
+		} else if (contiguous_blks) {
+			lblk = page->index <<
+			       (PAGE_CACHE_SHIFT - inode->i_blkbits);
+			lblk += (curr_off >> inode->i_blkbits) -
+				contiguous_blks;
+			ext4_es_remove_extent(inode, lblk, contiguous_blks);
+			contiguous_blks = 0;
 		}
 		curr_off = next_off;
 	} while ((bh = bh->b_this_page) != head);
 
-	if (to_release) {
+	if (contiguous_blks) {
 		lblk = page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
-		ext4_es_remove_extent(inode, lblk, to_release);
+		lblk += (curr_off >> inode->i_blkbits) - contiguous_blks;
+		ext4_es_remove_extent(inode, lblk, contiguous_blks);
 	}
 
 	/* If we have released all the blocks belonging to a cluster, then we

---
 fs/ext4/migrate.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
@@ -620,6 +620,7 @@ int ext4_ind_migrate(struct inode *inode
 	struct ext4_inode_info		*ei = EXT4_I(inode);
 	struct ext4_extent		*ex;
 	unsigned int			i, len;
+	ext4_lblk_t			end;
 	ext4_fsblk_t			blk;
 	handle_t			*handle;
 	int				ret;

@@ -633,6 +634,14 @@ int ext4_ind_migrate(struct inode *inode
 				       EXT4_FEATURE_RO_COMPAT_BIGALLOC))
 		return -EOPNOTSUPP;
 
+	/*
+	 * In order to get correct extent info, force all delayed allocation
+	 * blocks to be allocated, otherwise delayed allocation blocks may not
+	 * be reflected and bypass the checks on extent header.
+	 */
+	if (test_opt(inode->i_sb, DELALLOC))
+		ext4_alloc_da_blocks(inode);
+
 	handle = ext4_journal_start(inode, EXT4_HT_MIGRATE, 1);
 	if (IS_ERR(handle))
 		return PTR_ERR(handle);

@@ -654,7 +663,8 @@ int ext4_ind_migrate(struct inode *inode
 	else {
 		len = le16_to_cpu(ex->ee_len);
 		blk = ext4_ext_pblock(ex);
-		if (len > EXT4_NDIR_BLOCKS) {
+		end = le32_to_cpu(ex->ee_block) + len - 1;
+		if (end >= EXT4_NDIR_BLOCKS) {
 			ret = -EOPNOTSUPP;
 			goto errout;
 		}

  # assmuing 4k block size ext4, with delalloc enabled
  # skip the first block and write to the second block
  xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/ext4/testfile
  # converting to indirect-mapped file, which would move the data blocks
  # to the beginning of the file, but extent status cache still marks
  # that region as a hole
  chattr -e /mnt/ext4/testfile
  # delayed allocation writes to the "hole", reclaim the same data block
  # again, results in i_blocks corruption
  xfs_io -c "pwrite 0 4k" /mnt/ext4/testfile
  umount /mnt/ext4
  e2fsck -nf /dev/sda6
  ...
  Inode 53, i_blocks is 16, should be 8.  Fix? no
  ...
---
 fs/ext4/migrate.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
@@ -620,7 +620,7 @@ int ext4_ind_migrate(struct inode *inode
 	struct ext4_inode_info		*ei = EXT4_I(inode);
 	struct ext4_extent		*ex;
 	unsigned int			i, len;
-	ext4_lblk_t			end;
+	ext4_lblk_t			start, end;
 	ext4_fsblk_t			blk;
 	handle_t			*handle;
 	int				ret;

@@ -659,11 +659,12 @@ int ext4_ind_migrate(struct inode *inode
 		goto errout;
 	}
 	if (eh->eh_entries == 0)
-		blk = len = 0;
+		blk = len = start = end = 0;
 	else {
 		len = le16_to_cpu(ex->ee_len);
 		blk = ext4_ext_pblock(ex);
-		end = le32_to_cpu(ex->ee_block) + len - 1;
+		start = le32_to_cpu(ex->ee_block);
+		end = start + len - 1;
 		if (end >= EXT4_NDIR_BLOCKS) {
 			ret = -EOPNOTSUPP;
 			goto errout;

@@ -672,7 +673,7 @@ int ext4_ind_migrate(struct inode *inode
 
 	ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
 	memset(ei->i_data, 0, sizeof(ei->i_data));
-	for (i=0; i < len; i++)
+	for (i = start; i <= end; i++)
 		ei->i_data[i] = cpu_to_le32(blk++);
 	ext4_mark_inode_dirty(handle, inode);
 errout:

---
 fs/ext4/mballoc.c |   16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)
@@ -4800,18 +4800,12 @@ do_more:
 		/*
 		 * blocks being freed are metadata. these blocks shouldn't
 		 * be used until this transaction is committed
+		 *
+		 * We use __GFP_NOFAIL because ext4_free_blocks() is not allowed
+		 * to fail.
 		 */
-	retry:
-		new_entry = kmem_cache_alloc(ext4_free_data_cachep, GFP_NOFS);
-		if (!new_entry) {
-			/*
-			 * We use a retry loop because
-			 * ext4_free_blocks() is not allowed to fail.
-			 */
-			cond_resched();
-			congestion_wait(BLK_RW_ASYNC, HZ/50);
-			goto retry;
-		}
+		new_entry = kmem_cache_alloc(ext4_free_data_cachep,
+				GFP_NOFS|__GFP_NOFAIL);
 		new_entry->efd_start_cluster = bit;
 		new_entry->efd_group = block_group;
 		new_entry->efd_count = count_clusters;

[<ffffffff815c4bd4>] dump_stack+0x19/0x1b
[<ffffffff8105dba1>] warn_slowpath_common+0x61/0x80
[<ffffffff8105dcca>] warn_slowpath_null+0x1a/0x20
[<ffffffff815c2142>] slab_pre_alloc_hook.isra.31.part.32+0x15/0x17
[<ffffffff8119c045>] kmem_cache_alloc+0x55/0x210
[<ffffffff811477f5>] ? mempool_alloc_slab+0x15/0x20
[<ffffffff811477f5>] mempool_alloc_slab+0x15/0x20
[<ffffffff81147939>] mempool_alloc+0x69/0x170
[<ffffffff815cb69e>] ? _raw_spin_unlock_irq+0xe/0x20
[<ffffffff8109160d>] ? finish_task_switch+0x5d/0x150
[<ffffffff811f1a8e>] bio_alloc_bioset+0x1be/0x2e0
[<ffffffff8127ee49>] blkdev_issue_flush+0x99/0x120
[<ffffffffa019a733>] jbd2_cleanup_journal_tail+0x93/0xa0 [jbd2] -->GFP_KERNEL
[<ffffffffa019aca1>] jbd2_log_do_checkpoint+0x221/0x4a0 [jbd2]
[<ffffffffa019afc7>] __jbd2_log_wait_for_space+0xa7/0x1e0 [jbd2]
[<ffffffffa01952d8>] start_this_handle+0x2d8/0x550 [jbd2]
[<ffffffff811b02a9>] ? __memcg_kmem_put_cache+0x29/0x30
[<ffffffff8119c120>] ? kmem_cache_alloc+0x130/0x210
[<ffffffffa019573a>] jbd2__journal_start+0xba/0x190 [jbd2]
[<ffffffff811532ce>] ? lru_cache_add+0xe/0x10
[<ffffffffa01c9549>] ? ext4_da_write_begin+0xf9/0x330 [ext4]
[<ffffffffa01f2c77>] __ext4_journal_start_sb+0x77/0x160 [ext4]
[<ffffffffa01c9549>] ext4_da_write_begin+0xf9/0x330 [ext4]
[<ffffffff811446ec>] generic_file_buffered_write_iter+0x10c/0x270
[<ffffffff81146918>] __generic_file_write_iter+0x178/0x390
[<ffffffff81146c6b>] __generic_file_aio_write+0x8b/0xb0
[<ffffffff81146ced>] generic_file_aio_write+0x5d/0xc0
[<ffffffffa01bf289>] ext4_file_write+0xa9/0x450 [ext4]
[<ffffffff811c31d9>] ? pipe_read+0x379/0x4f0
[<ffffffff811b93f0>] do_sync_write+0x90/0xe0
[<ffffffff811b9b6d>] vfs_write+0xbd/0x1e0
[<ffffffff811ba5b8>] SyS_write+0x58/0xb0
[<ffffffff815d4799>] system_call_fastpath+0x16/0x1b
---
 fs/jbd2/checkpoint.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -405,7 +405,7 @@ int jbd2_cleanup_journal_tail(journal_t
 	 * jbd2_cleanup_journal_tail() doesn't get called all that often.
 	 */
 	if (journal->j_flags & JBD2_BARRIER)
-		blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
+		blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL);
 
 	__jbd2_update_log_tail(journal, first_tid, blocknr);
 	return 0;

---
 fs/jbd2/checkpoint.c |    5 ++---
 fs/jbd2/journal.c    |   38 +++++++++++++++++++++++++++++++-------
 include/linux/jbd2.h |    4 ++--
 3 files changed, 35 insertions(+), 12 deletions(-)
@@ -390,7 +390,7 @@ int jbd2_cleanup_journal_tail(journal_t
 	unsigned long	blocknr;
 
 	if (is_journal_aborted(journal))
-		return 1;
+		return -EIO;
 
 	if (!jbd2_journal_get_log_tail(journal, &first_tid, &blocknr))
 		return 1;

@@ -407,8 +407,7 @@ int jbd2_cleanup_journal_tail(journal_t
 	if (journal->j_flags & JBD2_BARRIER)
 		blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL);
 
-	__jbd2_update_log_tail(journal, first_tid, blocknr);
-	return 0;
+	return __jbd2_update_log_tail(journal, first_tid, blocknr);
 }
 
 

@@ -885,9 +885,10 @@ int jbd2_journal_get_log_tail(journal_t
  *
  * Requires j_checkpoint_mutex
  */
-void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block)
+int __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block)
 {
 	unsigned long freed;
+	int ret;
 
 	BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
 

@@ -897,7 +898,10 @@ void __jbd2_update_log_tail(journal_t *j
 	 * space and if we lose sb update during power failure we'd replay
 	 * old transaction with possibly newly overwritten data.
 	 */
-	jbd2_journal_update_sb_log_tail(journal, tid, block, WRITE_FUA);
+	ret = jbd2_journal_update_sb_log_tail(journal, tid, block, WRITE_FUA);
+	if (ret)
+		goto out;
+
 	write_lock(&journal->j_state_lock);
 	freed = block - journal->j_tail;
 	if (block < journal->j_tail)

@@ -913,6 +917,9 @@ void __jbd2_update_log_tail(journal_t *j
 	journal->j_tail_sequence = tid;
 	journal->j_tail = block;
 	write_unlock(&journal->j_state_lock);
+
+out:
+	return ret;
 }
 
 /*

@@ -1331,7 +1338,7 @@ static int journal_reset(journal_t *jour
 	return jbd2_journal_start_thread(journal);
 }
 
-static void jbd2_write_superblock(journal_t *journal, int write_op)
+static int jbd2_write_superblock(journal_t *journal, int write_op)
 {
 	struct buffer_head *bh = journal->j_sb_buffer;
 	journal_superblock_t *sb = journal->j_superblock;

@@ -1370,7 +1377,10 @@ static void jbd2_write_superblock(journa
 		printk(KERN_ERR "JBD2: Error %d detected when updating "
 		       "journal superblock for %s.\n", ret,
 		       journal->j_devname);
+		jbd2_journal_abort(journal, ret);
 	}
+
+	return ret;
 }
 
 /**

@@ -1383,10 +1393,11 @@ static void jbd2_write_superblock(journa
  * Update a journal's superblock information about log tail and write it to
  * disk, waiting for the IO to complete.
  */
-void jbd2_journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid,
+int jbd2_journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid,
 				     unsigned long tail_block, int write_op)
 {
 	journal_superblock_t *sb = journal->j_superblock;
+	int ret;
 
 	BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
 	jbd_debug(1, "JBD2: updating superblock (start %lu, seq %u)\n",

@@ -1395,13 +1406,18 @@ void jbd2_journal_update_sb_log_tail(jou
 	sb->s_sequence = cpu_to_be32(tail_tid);
 	sb->s_start    = cpu_to_be32(tail_block);
 
-	jbd2_write_superblock(journal, write_op);
+	ret = jbd2_write_superblock(journal, write_op);
+	if (ret)
+		goto out;
 
 	/* Log is no longer empty */
 	write_lock(&journal->j_state_lock);
 	WARN_ON(!sb->s_sequence);
 	journal->j_flags &= ~JBD2_FLUSHED;
 	write_unlock(&journal->j_state_lock);
+
+out:
+	return ret;
 }
 
 /**

@@ -1950,7 +1966,14 @@ int jbd2_journal_flush(journal_t *journa
 		return -EIO;
 
 	mutex_lock(&journal->j_checkpoint_mutex);
-	jbd2_cleanup_journal_tail(journal);
+	if (!err) {
+		err = jbd2_cleanup_journal_tail(journal);
+		if (err < 0) {
+			mutex_unlock(&journal->j_checkpoint_mutex);
+			goto out;
+		}
+		err = 0;
+	}
 
 	/* Finally, mark the journal as really needing no recovery.
 	 * This sets s_start==0 in the underlying superblock, which is

@@ -1966,7 +1989,8 @@ int jbd2_journal_flush(journal_t *journa
 	J_ASSERT(journal->j_head == journal->j_tail);
 	J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence);
 	write_unlock(&journal->j_state_lock);
-	return 0;
+out:
+	return err;
 }
 
 /**

@@ -1035,7 +1035,7 @@ struct buffer_head *jbd2_journal_get_des
 int jbd2_journal_next_log_block(journal_t *, unsigned long long *);
 int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid,
 			      unsigned long *block);
-void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
+int __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
 void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
 
 /* Commit management */

@@ -1157,7 +1157,7 @@ extern int	   jbd2_journal_recover    (j
 extern int	   jbd2_journal_wipe       (journal_t *, int);
 extern int	   jbd2_journal_skip_recovery	(journal_t *);
 extern void	   jbd2_journal_update_sb_errno(journal_t *);
-extern void	   jbd2_journal_update_sb_log_tail	(journal_t *, tid_t,
+extern int	   jbd2_journal_update_sb_log_tail	(journal_t *, tid_t,
 				unsigned long, int);
 extern void	   __jbd2_journal_abort_hard	(journal_t *);
 extern void	   jbd2_journal_abort      (journal_t *, int);

---
 drivers/nfc/st21nfcb/st21nfcb.c |    3 ---
 1 file changed, 3 deletions(-)
@@ -131,11 +131,8 @@ EXPORT_SYMBOL_GPL(st21nfcb_nci_probe);
 
 void st21nfcb_nci_remove(struct nci_dev *ndev)
 {
-	struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
-
 	nci_unregister_device(ndev);
 	nci_free_device(ndev);
-	kfree(info);
 }
 EXPORT_SYMBOL_GPL(st21nfcb_nci_remove);
 

---
 drivers/nfc/st21nfcb/i2c.c |    7 -------
 1 file changed, 7 deletions(-)
@@ -87,11 +87,6 @@ static void st21nfcb_nci_i2c_disable(voi
 	gpio_set_value(phy->gpio_reset, 1);
 }
 
-static void st21nfcb_nci_remove_header(struct sk_buff *skb)
-{
-	skb_pull(skb, ST21NFCB_FRAME_HEADROOM);
-}
-
 /*
  * Writing a frame must not return the number of written bytes.
  * It must return either zero for success, or <0 for error.

@@ -121,8 +116,6 @@ static int st21nfcb_nci_i2c_write(void *
 			r = 0;
 	}
 
-	st21nfcb_nci_remove_header(skb);
-
 	return r;
 }
 

---
 drivers/nfc/st21nfcb/i2c.c |    3 ---
 1 file changed, 3 deletions(-)
@@ -359,9 +359,6 @@ static int st21nfcb_nci_i2c_remove(struc
 
 	ndlc_remove(phy->ndlc);
 
-	if (phy->powered)
-		st21nfcb_nci_i2c_disable(phy);
-
 	return 0;
 }
 

---
 drivers/rtc/rtc-snvs.c |   30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)
@@ -322,6 +322,13 @@ static int snvs_rtc_suspend(struct devic
 	if (device_may_wakeup(dev))
 		enable_irq_wake(data->irq);
 
+	return 0;
+}
+
+static int snvs_rtc_suspend_noirq(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
 	if (data->clk)
 		clk_disable_unprepare(data->clk);
 

@@ -331,23 +338,28 @@ static int snvs_rtc_suspend(struct devic
 static int snvs_rtc_resume(struct device *dev)
 {
 	struct snvs_rtc_data *data = dev_get_drvdata(dev);
-	int ret;
 
 	if (device_may_wakeup(dev))
-		disable_irq_wake(data->irq);
+		return disable_irq_wake(data->irq);
 
-	if (data->clk) {
-		ret = clk_prepare_enable(data->clk);
-		if (ret)
-			return ret;
-	}
+	return 0;
+}
+
+static int snvs_rtc_resume_noirq(struct device *dev)
+{
+	struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+	if (data->clk)
+		return clk_prepare_enable(data->clk);
 
 	return 0;
 }
 
 static const struct dev_pm_ops snvs_rtc_pm_ops = {
-	.suspend_noirq = snvs_rtc_suspend,
-	.resume_noirq = snvs_rtc_resume,
+	.suspend = snvs_rtc_suspend,
+	.suspend_noirq = snvs_rtc_suspend_noirq,
+	.resume = snvs_rtc_resume,
+	.resume_noirq = snvs_rtc_resume_noirq,
 };
 
 #define SNVS_RTC_PM_OPS	(&snvs_rtc_pm_ops)

---
 drivers/i2c/busses/i2c-at91.c |   70 +++++++++++++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 17 deletions(-)
@@ -65,6 +65,9 @@
 #define	AT91_TWI_UNRE		0x0080	/* Underrun Error */
 #define	AT91_TWI_NACK		0x0100	/* Not Acknowledged */
 
+#define	AT91_TWI_INT_MASK \
+	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
+
 #define	AT91_TWI_IER		0x0024	/* Interrupt Enable Register */
 #define	AT91_TWI_IDR		0x0028	/* Interrupt Disable Register */
 #define	AT91_TWI_IMR		0x002c	/* Interrupt Mask Register */

@@ -119,13 +122,12 @@ static void at91_twi_write(struct at91_t
 
 static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
 {
-	at91_twi_write(dev, AT91_TWI_IDR,
-		       AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY);
+	at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
 }
 
 static void at91_twi_irq_save(struct at91_twi_dev *dev)
 {
-	dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & 0x7;
+	dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
 	at91_disable_twi_interrupts(dev);
 }
 

@@ -215,6 +217,14 @@ static void at91_twi_write_data_dma_call
 	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
 			 dev->buf_len, DMA_TO_DEVICE);
 
+	/*
+	 * When this callback is called, THR/TX FIFO is likely not to be empty
+	 * yet. So we have to wait for TXCOMP or NACK bits to be set into the
+	 * Status Register to be sure that the STOP bit has been sent and the
+	 * transfer is completed. The NACK interrupt has already been enabled,
+	 * we just have to enable TXCOMP one.
+	 */
+	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
 	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 }
 

@@ -309,7 +319,7 @@ static void at91_twi_read_data_dma_callb
 	/* The last two bytes have to be read without using dma */
 	dev->buf += dev->buf_len - 2;
 	dev->buf_len = 2;
-	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_RXRDY);
+	at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_RXRDY | AT91_TWI_TXCOMP);
 }
 
 static void at91_twi_read_data_dma(struct at91_twi_dev *dev)

@@ -370,7 +380,7 @@ static irqreturn_t atmel_twi_interrupt(i
 	/* catch error flags */
 	dev->transfer_status |= status;
 
-	if (irqstatus & AT91_TWI_TXCOMP) {
+	if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
 		at91_disable_twi_interrupts(dev);
 		complete(&dev->cmd_complete);
 	}

@@ -384,6 +394,34 @@ static int at91_do_twi_transfer(struct a
 	unsigned long time_left;
 	bool has_unre_flag = dev->pdata->has_unre_flag;
 
+	/*
+	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
+	 * read flag but shows the state of the transmission at the time the
+	 * Status Register is read. According to the programmer datasheet,
+	 * TXCOMP is set when both holding register and internal shifter are
+	 * empty and STOP condition has been sent.
+	 * Consequently, we should enable NACK interrupt rather than TXCOMP to
+	 * detect transmission failure.
+	 *
+	 * Besides, the TXCOMP bit is already set before the i2c transaction
+	 * has been started. For read transactions, this bit is cleared when
+	 * writing the START bit into the Control Register. So the
+	 * corresponding interrupt can safely be enabled just after.
+	 * However for write transactions managed by the CPU, we first write
+	 * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
+	 * interrupt. If TXCOMP interrupt were enabled before writing into THR,
+	 * the interrupt handler would be called immediately and the i2c command
+	 * would be reported as completed.
+	 * Also when a write transaction is managed by the DMA controller,
+	 * enabling the TXCOMP interrupt in this function may lead to a race
+	 * condition since we don't know whether the TXCOMP interrupt is enabled
+	 * before or after the DMA has started to write into THR. So the TXCOMP
+	 * interrupt is enabled later by at91_twi_write_data_dma_callback().
+	 * Immediately after in that DMA callback, we still need to send the
+	 * STOP condition manually writing the corresponding bit into the
+	 * Control Register.
+	 */
+
 	dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
 		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
 

@@ -414,26 +452,24 @@ static int at91_do_twi_transfer(struct a
 		 * seems to be the best solution.
 		 */
 		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
 			at91_twi_read_data_dma(dev);
-			/*
-			 * It is important to enable TXCOMP irq here because
-			 * doing it only when transferring the last two bytes
-			 * will mask NACK errors since TXCOMP is set when a
-			 * NACK occurs.
-			 */
-			at91_twi_write(dev, AT91_TWI_IER,
-			       AT91_TWI_TXCOMP);
-		} else
+		} else {
 			at91_twi_write(dev, AT91_TWI_IER,
-			       AT91_TWI_TXCOMP | AT91_TWI_RXRDY);
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_RXRDY);
+		}
 	} else {
 		if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
+			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
 			at91_twi_write_data_dma(dev);
-			at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
 		} else {
 			at91_twi_write_next_byte(dev);
 			at91_twi_write(dev, AT91_TWI_IER,
-				AT91_TWI_TXCOMP | AT91_TWI_TXRDY);
+				       AT91_TWI_TXCOMP |
+				       AT91_TWI_NACK |
+				       AT91_TWI_TXRDY);
 		}
 	}
 

---
 drivers/iio/light/cm3323.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -123,7 +123,7 @@ static int cm3323_set_it_bits(struct cm3
 	for (i = 0; i < ARRAY_SIZE(cm3323_int_time); i++) {
 		if (val == cm3323_int_time[i].val &&
 		    val2 == cm3323_int_time[i].val2) {
-			reg_conf = data->reg_conf;
+			reg_conf = data->reg_conf & ~CM3323_CONF_IT_MASK;
 			reg_conf |= i << CM3323_CONF_IT_SHIFT;
 
 			ret = i2c_smbus_write_word_data(data->client,

---
 drivers/iio/adc/Kconfig |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
@@ -146,8 +146,7 @@ config DA9150_GPADC
 
 config CC10001_ADC
 	tristate "Cosmic Circuits 10001 ADC driver"
-	depends on HAVE_CLK || REGULATOR
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && HAVE_CLK && REGULATOR
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

---
 drivers/iio/accel/bmc150-accel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -1465,7 +1465,7 @@ static void bmc150_accel_unregister_trig
 {
 	int i;
 
-	for (i = from; i >= 0; i++) {
+	for (i = from; i >= 0; i--) {
 		if (data->triggers[i].indio_trig) {
 			iio_trigger_unregister(data->triggers[i].indio_trig);
 			data->triggers[i].indio_trig = NULL;

---
 drivers/iio/light/tcs3414.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -185,7 +185,7 @@ static int tcs3414_write_raw(struct iio_
 		if (val != 0)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(tcs3414_times); i++) {
-			if (val == tcs3414_times[i] * 1000) {
+			if (val2 == tcs3414_times[i] * 1000) {
 				data->timing &= ~TCS3414_INTEG_MASK;
 				data->timing |= i;
 				return i2c_smbus_write_byte_data(

---
 drivers/iio/dac/ad5624r_spi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -22,7 +22,7 @@
 #include "ad5624r.h"
 
 static int ad5624r_spi_write(struct spi_device *spi,
-			     u8 cmd, u8 addr, u16 val, u8 len)
+			     u8 cmd, u8 addr, u16 val, u8 shift)
 {
 	u32 data;
 	u8 msg[3];

@@ -35,7 +35,7 @@ static int ad5624r_spi_write(struct spi_
 	 * 14-, 12-bit input code followed by 0, 2, or 4 don't care bits,
 	 * for the AD5664R, AD5644R, and AD5624R, respectively.
 	 */
-	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << (16 - len));
+	data = (0 << 22) | (cmd << 19) | (addr << 16) | (val << shift);
 	msg[0] = data >> 16;
 	msg[1] = data >> 8;
 	msg[2] = data;

---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
@@ -431,6 +431,23 @@ static int inv_mpu6050_write_gyro_scale(
 	return -EINVAL;
 }
 
+static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
 static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
 {
 	int result, i;

@@ -696,6 +713,7 @@ static const struct iio_info mpu_info =
 	.driver_module = THIS_MODULE,
 	.read_raw = &inv_mpu6050_read_raw,
 	.write_raw = &inv_mpu6050_write_raw,
+	.write_raw_get_fmt = &inv_write_raw_get_fmt,
 	.attrs = &inv_attribute_group,
 	.validate_trigger = inv_mpu6050_validate_trigger,
 };

---
 drivers/iio/temperature/tmp006.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -132,6 +132,9 @@ static int tmp006_write_raw(struct iio_d
 	struct tmp006_data *data = iio_priv(indio_dev);
 	int i;
 
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
 	for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
 		if ((val == tmp006_freqs[i][0]) &&
 		    (val2 == tmp006_freqs[i][1])) {

---
 drivers/iio/adc/twl4030-madc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
@@ -835,7 +835,8 @@ static int twl4030_madc_probe(struct pla
 	irq = platform_get_irq(pdev, 0);
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				   twl4030_madc_threaded_irq_handler,
-				   IRQF_TRIGGER_RISING, "twl4030_madc", madc);
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "twl4030_madc", madc);
 	if (ret) {
 		dev_err(&pdev->dev, "could not request irq\n");
 		goto err_i2c;

---
 Documentation/ABI/testing/sysfs-bus-iio |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
@@ -1165,10 +1165,8 @@ Description:
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw

---
 drivers/iio/proximity/sx9500.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -206,7 +206,7 @@ static int sx9500_read_proximity(struct
 	if (ret < 0)
 		return ret;
 
-	*val = 32767 - (s16)be16_to_cpu(regval);
+	*val = be16_to_cpu(regval);
 
 	return IIO_VAL_INT;
 }

---
 drivers/iio/adc/rockchip_saradc.c |    4 ++++
 1 file changed, 4 insertions(+)
@@ -349,3 +349,7 @@ static struct platform_driver rockchip_s
 };
 
 module_platform_driver(rockchip_saradc_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <[email protected]>");
+MODULE_DESCRIPTION("Rockchip SARADC driver");
+MODULE_LICENSE("GPL v2");

---
 drivers/iio/adc/at91_adc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
@@ -182,7 +182,7 @@ struct at91_adc_caps {
 	u8	ts_pen_detect_sensitivity;
 
 	/* startup time calculate function */
-	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
+	u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz);
 
 	u8	num_channels;
 	struct at91_adc_reg_desc registers;

@@ -201,7 +201,7 @@ struct at91_adc_state {
 	u8			num_channels;
 	void __iomem		*reg_base;
 	struct at91_adc_reg_desc *registers;
-	u8			startup_time;
+	u32			startup_time;
 	u8			sample_hold_time;
 	bool			sleep_mode;
 	struct iio_trigger	**trig;

@@ -779,7 +779,7 @@ ret:
 	return ret;
 }
 
-static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * Number of ticks needed to cover the startup time of the ADC

@@ -790,7 +790,7 @@ static u32 calc_startup_ticks_9260(u8 st
 	return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8;
 }
 
-static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz)
+static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz)
 {
 	/*
 	 * For sama5d3x and at91sam9x5, the formula changes to:

---
 drivers/media/v4l2-core/videobuf2-core.c |   33 +++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
@@ -1237,6 +1237,23 @@ void vb2_discard_done(struct vb2_queue *
 }
 EXPORT_SYMBOL_GPL(vb2_discard_done);
 
+static void vb2_warn_zero_bytesused(struct vb2_buffer *vb)
+{
+	static bool __check_once __read_mostly;
+
+	if (__check_once)
+		return;
+
+	__check_once = true;
+	__WARN();
+
+	pr_warn_once("use of bytesused == 0 is deprecated and will be removed in the future,\n");
+	if (vb->vb2_queue->allow_zero_bytesused)
+		pr_warn_once("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n");
+	else
+		pr_warn_once("use the actual size instead.\n");
+}
+
 /**
  * __fill_vb2_buffer() - fill a vb2_buffer with information provided in a
  * v4l2_buffer by the userspace. The caller has already verified that struct

@@ -1247,16 +1264,6 @@ static void __fill_vb2_buffer(struct vb2
 {
 	unsigned int plane;
 
-	if (V4L2_TYPE_IS_OUTPUT(b->type)) {
-		if (WARN_ON_ONCE(b->bytesused == 0)) {
-			pr_warn_once("use of bytesused == 0 is deprecated and will be removed in the future,\n");
-			if (vb->vb2_queue->allow_zero_bytesused)
-				pr_warn_once("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n");
-			else
-				pr_warn_once("use the actual size instead.\n");
-		}
-	}
-
 	if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
 		if (b->memory == V4L2_MEMORY_USERPTR) {
 			for (plane = 0; plane < vb->num_planes; ++plane) {

@@ -1297,6 +1304,9 @@ static void __fill_vb2_buffer(struct vb2
 				struct v4l2_plane *pdst = &v4l2_planes[plane];
 				struct v4l2_plane *psrc = &b->m.planes[plane];
 
+				if (psrc->bytesused == 0)
+					vb2_warn_zero_bytesused(vb);
+
 				if (vb->vb2_queue->allow_zero_bytesused)
 					pdst->bytesused = psrc->bytesused;
 				else

@@ -1331,6 +1341,9 @@ static void __fill_vb2_buffer(struct vb2
 		}
 
 		if (V4L2_TYPE_IS_OUTPUT(b->type)) {
+			if (b->bytesused == 0)
+				vb2_warn_zero_bytesused(vb);
+
 			if (vb->vb2_queue->allow_zero_bytesused)
 				v4l2_planes[0].bytesused = b->bytesused;
 			else

---
 drivers/media/usb/dvb-usb/dib0700_devices.c |    6 ++++++
 1 file changed, 6 insertions(+)
@@ -3944,6 +3944,8 @@ struct dvb_usb_device_properties dib0700
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
 			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
 			}, {
 			.num_frontends = 1,
 			.fe = {{

@@ -3956,6 +3958,8 @@ struct dvb_usb_device_properties dib0700
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
 			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
 			}
 		},
 

@@ -4009,6 +4013,8 @@ struct dvb_usb_device_properties dib0700
 
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
 			}},
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
 			},
 		},
 

[    6.229393] ------------[ cut here ]------------
[    6.229414] WARNING: CPU: 1 PID: 593 at
drivers/media/v4l2-core/v4l2-ioctl.c:1025 v4l_querycap+0x41/0x70
[videodev]()
[    6.229415] Modules linked in: cx18_alsa mxl5005s s5h1409
[    6.229444]  drm ptp pps_core video
[    6.229446] CPU: 1 PID: 593 Comm: v4l_id Not tainted
3.19.3-200.fc21.x86_64 #1
[    6.229447] Hardware name: Gigabyte Technology Co., Ltd.
Z87-D3HP/Z87-D3HP-CF, BIOS F6 01/20/2014
[    6.229448]  0000000000000000 00000000d12b1131 ffff88042dacfc28
ffffffff8176e215
[    6.229449]  0000000000000000 0000000000000000 ffff88042dacfc68
ffffffff8109bc1a
[    6.229451]  ffffffffa0594000 ffff88042dacfd90 0000000000000000
ffffffffa04e2140
[    6.229452] Call Trace:
[    6.229466]  [<ffffffff8176e215>] dump_stack+0x45/0x57
[    6.229469]  [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[    6.229472]  [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[    6.229474]  [<ffffffffa04ca401>] v4l_querycap+0x41/0x70 [videodev]
[    6.229477]  [<ffffffffa04ca6cc>] __video_do_ioctl+0x29c/0x320 [videodev]
[    6.229479]  [<ffffffff81227131>] ? do_last+0x2f1/0x1210
[    6.229491]  [<ffffffffa04cc776>] video_usercopy+0x366/0x5d0 [videodev]
[    6.229494]  [<ffffffffa04ca430>] ? v4l_querycap+0x70/0x70 [videodev]
[    6.229497]  [<ffffffffa04cc9f5>] video_ioctl2+0x15/0x20 [videodev]
[    6.229499]  [<ffffffffa04c6794>] v4l2_ioctl+0x164/0x180 [videodev]
[    6.229501]  [<ffffffff8122e298>] do_vfs_ioctl+0x2f8/0x500
[    6.229502]  [<ffffffff8122e521>] SyS_ioctl+0x81/0xa0
[    6.229505]  [<ffffffff81774a09>] system_call_fastpath+0x12/0x17
[    6.229506] ---[ end trace dacd80d4b19277ea ]---
---
 drivers/media/pci/cx18/cx18-streams.c |    1 +
 1 file changed, 1 insertion(+)
@@ -90,6 +90,7 @@ static struct {
 		"encoder PCM audio",
 		VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET,
 		PCI_DMA_FROMDEVICE,
+		V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE,
 	},
 	{	/* CX18_ENC_STREAM_TYPE_IDX */
 		"encoder IDX",

	drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
---
 drivers/media/dvb-frontends/cx24117.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -1043,7 +1043,7 @@ static int cx24117_send_diseqc_msg(struc
 	dev_dbg(&state->priv->i2c->dev, ")\n");
 
 	/* Validate length */
-	if (d->msg_len > 15)
+	if (d->msg_len > sizeof(d->msg))
 		return -EINVAL;
 
 	/* DiSEqC message */

---
 drivers/media/dvb-frontends/af9013.c |    4 ++++
 1 file changed, 4 insertions(+)
@@ -605,6 +605,10 @@ static int af9013_set_frontend(struct dv
 			}
 		}
 
+		/* Return an error if can't find bandwidth or the right clock */
+		if (i == ARRAY_SIZE(coeff_lut))
+			return -EINVAL;
+
 		ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val,
 			sizeof(coeff_lut[i].val));
 	}

---
 drivers/media/pci/saa7164/saa7164-encoder.c |   11 ++++++-----
 drivers/media/pci/saa7164/saa7164-vbi.c     |   11 ++++++-----
 2 files changed, 12 insertions(+), 10 deletions(-)
@@ -721,13 +721,14 @@ static int vidioc_querycap(struct file *
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
 
-	cap->capabilities =
+	cap->device_caps =
 		V4L2_CAP_VIDEO_CAPTURE |
-		V4L2_CAP_READWRITE     |
-		0;
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_TUNER;
 
-	cap->capabilities |= V4L2_CAP_TUNER;
-	cap->version = 0;
+	cap->capabilities = cap->device_caps |
+		V4L2_CAP_VBI_CAPTURE |
+		V4L2_CAP_DEVICE_CAPS;
 
 	return 0;
 }

@@ -660,13 +660,14 @@ static int vidioc_querycap(struct file *
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
 
-	cap->capabilities =
+	cap->device_caps =
 		V4L2_CAP_VBI_CAPTURE |
-		V4L2_CAP_READWRITE     |
-		0;
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_TUNER;
 
-	cap->capabilities |= V4L2_CAP_TUNER;
-	cap->version = 0;
+	cap->capabilities = cap->device_caps |
+		V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_DEVICE_CAPS;
 
 	return 0;
 }

	drivers/media/dvb-frontends/s5h1420.c:193 s5h1420_send_master_cmd() error: buffer overflow 'cmd->msg' 6 <= 7
---
 drivers/media/dvb-frontends/s5h1420.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -180,7 +180,7 @@ static int s5h1420_send_master_cmd (stru
 	int result = 0;
 
 	dprintk("enter %s\n", __func__);
-	if (cmd->msg_len > 8)
+	if (cmd->msg_len > sizeof(cmd->msg))
 		return -EINVAL;
 
 	/* setup for DISEQC */

	drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
---
 drivers/media/dvb-frontends/cx24116.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
@@ -963,6 +963,10 @@ static int cx24116_send_diseqc_msg(struc
 	struct cx24116_state *state = fe->demodulator_priv;
 	int i, ret;
 
+	/* Validate length */
+	if (d->msg_len > sizeof(d->msg))
+                return -EINVAL;
+
 	/* Dump DiSEqC message */
 	if (debug) {
 		printk(KERN_INFO "cx24116: %s(", __func__);

@@ -974,10 +978,6 @@ static int cx24116_send_diseqc_msg(struc
 		printk(") toneburst=%d\n", toneburst);
 	}
 
-	/* Validate length */
-	if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
-		return -EINVAL;
-
 	/* DiSEqC message */
 	for (i = 0; i < d->msg_len; i++)
 		state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i];

---
 sound/soc/codecs/wm5102.c |    2 +-
 sound/soc/codecs/wm5110.c |    2 +-
 sound/soc/codecs/wm8997.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
@@ -42,7 +42,7 @@ struct wm5102_priv {
 static DECLARE_TLV_DB_SCALE(ana_tlv, 0, 100, 0);
 static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
-static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
+static DECLARE_TLV_DB_SCALE(noise_tlv, -13200, 600, 0);
 static DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
 
 static const struct wm_adsp_region wm5102_dsp1_regions[] = {

@@ -167,7 +167,7 @@ static int wm5110_sysclk_ev(struct snd_s
 static DECLARE_TLV_DB_SCALE(ana_tlv, 0, 100, 0);
 static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
-static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
+static DECLARE_TLV_DB_SCALE(noise_tlv, -13200, 600, 0);
 static DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
 
 #define WM5110_NG_SRC(name, base) \

@@ -40,7 +40,7 @@ struct wm8997_priv {
 static DECLARE_TLV_DB_SCALE(ana_tlv, 0, 100, 0);
 static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
-static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
+static DECLARE_TLV_DB_SCALE(noise_tlv, -13200, 600, 0);
 static DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
 
 static const struct reg_default wm8997_sysclk_reva_patch[] = {

---
 sound/soc/codecs/rt5645.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -2837,6 +2837,8 @@ static int rt5645_i2c_probe(struct i2c_c
 		}
 	}
 
+	INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
+
 	if (rt5645->i2c->irq) {
 		ret = request_threaded_irq(rt5645->i2c->irq, NULL, rt5645_irq,
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING

@@ -2855,8 +2857,6 @@ static int rt5645_i2c_probe(struct i2c_c
 			dev_err(&i2c->dev, "Fail gpio_direction hp_det_gpio\n");
 	}
 
-	INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
-
 	return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5645,
 				      rt5645_dai, ARRAY_SIZE(rt5645_dai));
 }

---
 sound/soc/codecs/max98925.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -346,7 +346,7 @@ static int max98925_dai_set_fmt(struct s
 	}
 
 	regmap_update_bits(max98925->regmap, MAX98925_FORMAT,
-			M98925_DAI_BCI_MASK, invert);
+			M98925_DAI_BCI_MASK | M98925_DAI_WCI_MASK, invert);
 	return 0;
 }
 

---
 sound/soc/qcom/Kconfig |    2 --
 1 file changed, 2 deletions(-)
@@ -6,12 +6,10 @@ config SND_SOC_QCOM
 
 config SND_SOC_LPASS_CPU
 	tristate
-	depends on SND_SOC_QCOM
 	select REGMAP_MMIO
 
 config SND_SOC_LPASS_PLATFORM
 	tristate
-	depends on SND_SOC_QCOM
 	select REGMAP_MMIO
 
 config SND_SOC_STORM

	sound/soc/fsl/imx-wm8962.c:196 imx_wm8962_probe() warn:
	we tested 'ret' before and it was 'false'
---
 sound/soc/fsl/imx-wm8962.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -190,7 +190,7 @@ static int imx_wm8962_probe(struct platf
 		dev_err(&pdev->dev, "audmux internal port setup failed\n");
 		return ret;
 	}
-	imx_audmux_v2_configure_port(ext_port,
+	ret = imx_audmux_v2_configure_port(ext_port,
 			IMX_AUDMUX_V2_PTCR_SYN,
 			IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
 	if (ret) {

---
 sound/soc/omap/Kconfig |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
@@ -100,12 +100,13 @@ config SND_OMAP_SOC_OMAP_TWL4030
 
 config SND_OMAP_SOC_OMAP_ABE_TWL6040
 	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
-	depends on TWL6040_CORE && SND_OMAP_SOC && (ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST)
+	depends on TWL6040_CORE && SND_OMAP_SOC
+	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
 	select SND_OMAP_SOC_DMIC
 	select SND_OMAP_SOC_MCPDM
 	select SND_SOC_TWL6040
 	select SND_SOC_DMIC
-	select COMMON_CLK_PALMAS if MFD_PALMAS
+	select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
 	help
 	  Say Y if you want to add support for SoC audio on OMAP boards using
 	  ABE and twl6040 codec. This driver currently supports:

---
 sound/soc/codecs/wm8955.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -298,7 +298,7 @@ static int wm8955_configure_clocking(str
 		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
 				    WM8955_K_17_9_MASK,
 				    (pll.k >> 9) & WM8955_K_17_9_MASK);
-		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3,
 				    WM8955_K_8_0_MASK,
 				    pll.k & WM8955_K_8_0_MASK);
 		if (pll.k)

---
 sound/soc/codecs/wm8960.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -245,7 +245,7 @@ SOC_SINGLE("PCM Playback -6dB Switch", W
 SOC_ENUM("ADC Polarity", wm8960_enum[0]),
 SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
 
-SOC_ENUM("DAC Polarity", wm8960_enum[2]),
+SOC_ENUM("DAC Polarity", wm8960_enum[1]),
 SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
 		    wm8960_get_deemph, wm8960_put_deemph),
 

---
 sound/soc/codecs/tas2552.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -120,6 +120,9 @@ static void tas2552_sw_shutdown(struct t
 {
 	u8 cfg1_reg;
 
+	if (!tas_data->codec)
+		return;
+
 	if (sw_shutdown)
 		cfg1_reg = 0;
 	else

---
 sound/soc/codecs/tas2552.c |    1 -
 1 file changed, 1 deletion(-)
@@ -338,7 +338,6 @@ static DECLARE_TLV_DB_SCALE(dac_tlv, -7,
 static const struct snd_kcontrol_new tas2552_snd_controls[] = {
 	SOC_SINGLE_TLV("Speaker Driver Playback Volume",
 			 TAS2552_PGA_GAIN, 0, 0x1f, 1, dac_tlv),
-	SOC_DAPM_SINGLE("Playback AMP", SND_SOC_NOPM, 0, 1, 0),
 };
 
 static const struct reg_default tas2552_init_regs[] = {

---
 drivers/ata/libata-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -4225,7 +4225,7 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[    3.788362] ata3.00: failed to enable AA (error_mask=0x1)
[    3.789243] ata3.00: failed to enable AA (error_mask=0x1)
---
 drivers/ata/libata-core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
@@ -4174,9 +4174,10 @@ static const struct ata_blacklist_entry
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+	/* drives which fail FPDMA_AA activation (some may freeze afterwards) */
 	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
 	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	{ "VB0250EAVER",	"HPG7",		ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */

---
 drivers/ata/libata-core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
@@ -4502,7 +4502,8 @@ static unsigned int ata_dev_set_xfermode
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;

---
 drivers/ata/libata-eh.c |   12 +++++++++++-
 include/linux/libata.h  |    1 +
 2 files changed, 12 insertions(+), 1 deletion(-)
@@ -1507,13 +1507,17 @@ unsigned int ata_read_log_page(struct at
 {
 	struct ata_taskfile tf;
 	unsigned int err_mask;
+	bool dma = false;
 
 	DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
 
+retry:
 	ata_tf_init(dev, &tf);
-	if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id)) {
+	if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+	    !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
 		tf.command = ATA_CMD_READ_LOG_DMA_EXT;
 		tf.protocol = ATA_PROT_DMA;
+		dma = true;
 	} else {
 		tf.command = ATA_CMD_READ_LOG_EXT;
 		tf.protocol = ATA_PROT_PIO;

@@ -1527,6 +1531,12 @@ unsigned int ata_read_log_page(struct at
 	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
 				     buf, sectors * ATA_SECT_SIZE, 0);
 
+	if (err_mask && dma) {
+		dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
+		ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
+		goto retry;
+	}
+
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
 }

@@ -431,6 +431,7 @@ enum {
 	ATA_HORKAGE_NOLPM	= (1 << 20),	/* don't use LPM */
 	ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21),	/* some WDs have broken LPM */
 	ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
+	ATA_HORKAGE_NO_NCQ_LOG	= (1 << 23),	/* don't use NCQ for log read */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

---
 Documentation/ABI/testing/sysfs-ata |   11 +++++++++++
 drivers/ata/libata-transport.c      |   22 ++++++++++++++++++++++
 2 files changed, 33 insertions(+)
@@ -90,6 +90,17 @@ gscr
 	130:	SATA_PMP_GSCR_SII_GPIO
 	Only valid if the device is a PM.
 
+trim
+
+	Shows the DSM TRIM mode currently used by the device. Valid
+	values are:
+	unsupported:		Drive does not support DSM TRIM
+	unqueued:		Drive supports unqueued DSM TRIM only
+	queued:			Drive supports queued DSM TRIM
+	forced_unqueued:	Drive's unqueued DSM support is known to be
+				buggy and only unqueued TRIM commands
+				are sent
+
 spdn_cnt
 
 	Number of time libata decided to lower the speed of link due to errors.

@@ -560,6 +560,27 @@ show_ata_dev_gscr(struct device *dev,
 
 static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL);
 
+static ssize_t
+show_ata_dev_trim(struct device *dev,
+		  struct device_attribute *attr, char *buf)
+{
+	struct ata_device *ata_dev = transport_class_to_dev(dev);
+	unsigned char *mode;
+
+	if (!ata_id_has_trim(ata_dev->id))
+		mode = "unsupported";
+	else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
+			mode = "forced_unqueued";
+	else if (ata_fpdma_dsm_supported(ata_dev))
+		mode = "queued";
+	else
+		mode = "unqueued";
+
+	return snprintf(buf, 20, "%s\n", mode);
+}
+
+static DEVICE_ATTR(trim, S_IRUGO, show_ata_dev_trim, NULL);
+
 static DECLARE_TRANSPORT_CLASS(ata_dev_class,
 			       "ata_device", NULL, NULL, NULL);
 

@@ -733,6 +754,7 @@ struct scsi_transport_template *ata_atta
 	SETUP_DEV_ATTRIBUTE(ering);
 	SETUP_DEV_ATTRIBUTE(id);
 	SETUP_DEV_ATTRIBUTE(gscr);
+	SETUP_DEV_ATTRIBUTE(trim);
 	BUG_ON(count > ATA_DEV_ATTRS);
 	i->dev_attrs[count] = NULL;
 

---
 drivers/ata/libata-scsi.c      |    3 ++-
 drivers/ata/libata-transport.c |    2 ++
 include/linux/libata.h         |    2 ++
 3 files changed, 6 insertions(+), 1 deletion(-)
@@ -2568,7 +2568,8 @@ static unsigned int ata_scsiop_read_cap(
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
 
-		if (ata_id_has_trim(args->id)) {
+		if (ata_id_has_trim(args->id) &&
+		    !(dev->horkage & ATA_HORKAGE_NOTRIM)) {
 			rbuf[14] |= 0x80; /* LBPME */
 
 			if (ata_id_has_zero_after_trim(args->id) &&

@@ -569,6 +569,8 @@ show_ata_dev_trim(struct device *dev,
 
 	if (!ata_id_has_trim(ata_dev->id))
 		mode = "unsupported";
+	else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM)
+		mode = "forced_unsupported";
 	else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
 			mode = "forced_unqueued";
 	else if (ata_fpdma_dsm_supported(ata_dev))

@@ -432,6 +432,8 @@ enum {
 	ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21),	/* some WDs have broken LPM */
 	ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
 	ATA_HORKAGE_NO_NCQ_LOG	= (1 << 23),	/* don't use NCQ for log read */
+	ATA_HORKAGE_NOTRIM	= (1 << 24),	/* don't use TRIM */
+
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

 # cat /sys/block/sdb/queue/max_sectors_kb
 512
---
 drivers/ata/libata-core.c |   10 ++++++++++
 include/linux/ata.h       |    1 +
 include/linux/libata.h    |    2 +-
 3 files changed, 12 insertions(+), 1 deletion(-)
@@ -2478,6 +2478,10 @@ int ata_dev_configure(struct ata_device
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
+					 dev->max_sectors);
+
 	if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
 

@@ -4146,6 +4150,12 @@ static const struct ata_blacklist_entry
 	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 	{ "Slimtype DVD A  DS8A9SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
+	/*
+	 * Causes silent data corruption with higher max sects.
+	 * http://lkml.kernel.org/g/[email protected]
+	 */
+	{ "ST380013AS",		"3.20",		ATA_HORKAGE_MAX_SEC_1024 },
+
 	/* Devices we expect to fail diagnostics */
 
 	/* Devices where NCQ should be avoided */

@@ -45,6 +45,7 @@ enum {
 	ATA_SECT_SIZE		= 512,
 	ATA_MAX_SECTORS_128	= 128,
 	ATA_MAX_SECTORS		= 256,
+	ATA_MAX_SECTORS_1024    = 1024,
 	ATA_MAX_SECTORS_LBA48	= 65535,/* TODO: 65536? */
 	ATA_MAX_SECTORS_TAPE	= 65535,
 

@@ -433,7 +433,7 @@ enum {
 	ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
 	ATA_HORKAGE_NO_NCQ_LOG	= (1 << 23),	/* don't use NCQ for log read */
 	ATA_HORKAGE_NOTRIM	= (1 << 24),	/* don't use TRIM */
-
+	ATA_HORKAGE_MAX_SEC_1024 = (1 << 25),	/* Limit max sects to 1024 */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

---
 drivers/ata/libata-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -4240,7 +4240,7 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Micron_M5[15]0*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M5[15]0_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M550*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

---
 drivers/ata/libata-core.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -4249,6 +4249,9 @@ static const struct ata_blacklist_entry
 	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
+	/* devices that don't properly handle TRIM commands */
+	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
+
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
 	 * (Return Zero After Trim) flags in the ATA Command Set are

---
 drivers/usb/dwc3/gadget.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -291,6 +291,8 @@ int dwc3_send_gadget_generic_command(str
 			dwc3_trace(trace_dwc3_gadget,
 					"Command Complete --> %d",
 					DWC3_DGCMD_STATUS(reg));
+			if (DWC3_DGCMD_STATUS(reg))
+				return -EINVAL;
 			return 0;
 		}
 

---
 drivers/usb/dwc3/gadget.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -330,6 +330,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3
 			dwc3_trace(trace_dwc3_gadget,
 					"Command Complete --> %d",
 					DWC3_DEPCMD_STATUS(reg));
+			if (DWC3_DEPCMD_STATUS(reg))
+				return -EINVAL;
 			return 0;
 		}
 

---
 drivers/usb/dwc3/gadget.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
@@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_compl
 {
 	unsigned		status = 0;
 	int			clean_busy;
+	u32			is_xfer_complete;
+
+	is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
 
 	if (event->status & DEPEVT_STATUS_BUSERR)
 		status = -ECONNRESET;
 
 	clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
-	if (clean_busy)
+	if (clean_busy && (is_xfer_complete ||
+				usb_endpoint_xfer_isoc(dep->endpoint.desc)))
 		dep->flags &= ~DWC3_EP_BUSY;
 
 	/*

---
 drivers/usb/dwc3/ep0.c |    4 ++++
 1 file changed, 4 insertions(+)
@@ -727,6 +727,10 @@ static int dwc3_ep0_std_request(struct d
 		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
 		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
 		break;
+	case USB_REQ_SET_INTERFACE:
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
+		dwc->start_config_issued = false;
+		/* Fall through */
 	default:
 		dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);

---
 drivers/usb/core/hub.c |   82 +++++++++++++++++++------------------------------
 1 file changed, 33 insertions(+), 49 deletions(-)
@@ -2616,9 +2616,6 @@ static bool use_new_scheme(struct usb_de
 	return USE_NEW_SCHEME(retry);
 }
 
-static int hub_port_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, unsigned int delay, bool warm);
-
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
  * Port worm reset is required to recover
  */

@@ -2706,44 +2703,6 @@ static int hub_port_wait_reset(struct us
 	return 0;
 }
 
-static void hub_port_finish_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, int *status)
-{
-	switch (*status) {
-	case 0:
-		/* TRSTRCY = 10 ms; plus some extra */
-		msleep(10 + 40);
-		if (udev) {
-			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
-			update_devnum(udev, 0);
-			/* The xHC may think the device is already reset,
-			 * so ignore the status.
-			 */
-			if (hcd->driver->reset_device)
-				hcd->driver->reset_device(hcd, udev);
-		}
-		/* FALL THROUGH */
-	case -ENOTCONN:
-	case -ENODEV:
-		usb_clear_port_feature(hub->hdev,
-				port1, USB_PORT_FEAT_C_RESET);
-		if (hub_is_superspeed(hub->hdev)) {
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_BH_PORT_RESET);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_CONNECTION);
-		}
-		if (udev)
-			usb_set_device_state(udev, *status
-					? USB_STATE_NOTATTACHED
-					: USB_STATE_DEFAULT);
-		break;
-	}
-}
-
 /* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm)

@@ -2767,13 +2726,10 @@ static int hub_port_reset(struct usb_hub
 		 * If the caller hasn't explicitly requested a warm reset,
 		 * double check and see if one is needed.
 		 */
-		status = hub_port_status(hub, port1,
-					&portstatus, &portchange);
-		if (status < 0)
-			goto done;
-
-		if (hub_port_warm_reset_required(hub, port1, portstatus))
-			warm = true;
+		if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
+			if (hub_port_warm_reset_required(hub, port1,
+							portstatus))
+				warm = true;
 	}
 	clear_bit(port1, hub->warm_reset_bits);
 

@@ -2799,11 +2755,19 @@ static int hub_port_reset(struct usb_hub
 
 		/* Check for disconnect or reset */
 		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
-			hub_port_finish_reset(hub, port1, udev, &status);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
 
 			if (!hub_is_superspeed(hub->hdev))
 				goto done;
 
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+
 			/*
 			 * If a USB 3.0 device migrates from reset to an error
 			 * state, re-issue the warm reset.

@@ -2836,6 +2800,26 @@ static int hub_port_reset(struct usb_hub
 	dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
 
 done:
+	if (status == 0) {
+		/* TRSTRCY = 10 ms; plus some extra */
+		msleep(10 + 40);
+		if (udev) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+			update_devnum(udev, 0);
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
+
+			usb_set_device_state(udev, USB_STATE_DEFAULT);
+		}
+	} else {
+		if (udev)
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	}
+
 	if (!hub_is_superspeed(hub->hdev))
 		up_read(&ehci_cf_port_reset_rwsem);
 

---
 drivers/usb/core/devio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -513,7 +513,7 @@ static void async_completed(struct urb *
 	snoop(&urb->dev->dev, "urb complete\n");
 	snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
 			as->status, COMPLETE, NULL, 0);
-	if ((urb->transfer_flags & URB_DIR_MASK) == USB_DIR_IN)
+	if ((urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN)
 		snoop_urb_data(urb, urb->actual_length);
 
 	if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&

---
 drivers/phy/phy-twl4030-usb.c |    1 -
 1 file changed, 1 deletion(-)
@@ -711,7 +711,6 @@ static int twl4030_usb_probe(struct plat
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.

---
  drivers/phy/phy-twl4030-usb.c |    1 -
  1 file changed, 1 deletion(-)
@@ -711,7 +711,6 @@ static int twl4030_usb_probe(struct plat
  	pm_runtime_use_autosuspend(&pdev->dev);
  	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
  	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
  	/* Our job is to use irqs and status from the power module
  	 * to keep the transceiver disabled when nothing's connected.
 
 
--

---
  drivers/phy/phy-twl4030-usb.c |    1 -
  1 file changed, 1 deletion(-)
@@ -711,7 +711,6 @@ static int twl4030_usb_probe(struct plat
      pm_runtime_use_autosuspend(&pdev->dev);
      pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
      pm_runtime_enable(&pdev->dev);
-    pm_runtime_get_sync(&pdev->dev);
 
      /* Our job is to use irqs and status from the power module
       * to keep the transceiver disabled when nothing's connected.

-- 
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
---
  drivers/phy/phy-twl4030-usb.c |    1 -
  1 file changed, 1 deletion(-)
@@ -711,7 +711,6 @@ static int twl4030_usb_probe(struct plat
      pm_runtime_use_autosuspend(&pdev->dev);
      pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
      pm_runtime_enable(&pdev->dev);
-    pm_runtime_get_sync(&pdev->dev);
 
      /* Our job is to use irqs and status from the power module
       * to keep the transceiver disabled when nothing's connected.

-- 
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
balbi
---
 drivers/usb/phy/phy-mxs-usb.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -217,6 +217,9 @@ static bool mxs_phy_get_vbus_status(stru
 {
 	unsigned int vbus_value;
 
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
 	if (mxs_phy->port_id == 0)
 		regmap_read(mxs_phy->regmap_anatop,
 			ANADIG_USB1_VBUS_DET_STAT,

---
 drivers/phy/phy-berlin-usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -106,8 +106,8 @@
 static const u32 phy_berlin_pll_dividers[] = {
 	/* Berlin 2 */
 	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
-	/* Berlin 2CD */
-	CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
+	/* Berlin 2CD/Q */
+	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
 };
 
 struct phy_berlin_usb_priv {

---
 drivers/usb/gadget/composite.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
@@ -1758,10 +1758,13 @@ unknown:
 		 * take such requests too, if that's ever needed:  to work
 		 * in config 0, etc.
 		 */
-		list_for_each_entry(f, &cdev->config->functions, list)
-			if (f->req_match && f->req_match(f, ctrl))
-				goto try_fun_setup;
-		f = NULL;
+		if (cdev->config) {
+			list_for_each_entry(f, &cdev->config->functions, list)
+				if (f->req_match && f->req_match(f, ctrl))
+					goto try_fun_setup;
+			f = NULL;
+		}
+
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
 			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)

---
 drivers/usb/gadget/function/f_fs.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
@@ -924,7 +924,8 @@ static ssize_t ffs_epfile_write_iter(str
 
 	kiocb->private = p;
 
-	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
 
 	res = ffs_epfile_io(kiocb->ki_filp, p);
 	if (res == -EIOCBQUEUED)

@@ -968,7 +969,8 @@ static ssize_t ffs_epfile_read_iter(stru
 
 	kiocb->private = p;
 
-	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+	if (p->aio)
+		kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
 
 	res = ffs_epfile_io(kiocb->ki_filp, p);
 	if (res == -EIOCBQUEUED)

---
 drivers/usb/gadget/udc/mv_udc_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -2167,7 +2167,7 @@ static int mv_udc_probe(struct platform_
 		return -ENODEV;
 	}
 
-	udc->phy_regs = ioremap(r->start, resource_size(r));
+	udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
 	if (udc->phy_regs == NULL) {
 		dev_err(&pdev->dev, "failed to map phy I/O memory\n");
 		return -EBUSY;

---
 drivers/usb/gadget/function/f_mass_storage.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
@@ -2786,7 +2786,7 @@ int fsg_common_set_nluns(struct fsg_comm
 		return -EINVAL;
 	}
 
-	curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL);
+	curlun = kcalloc(FSG_MAX_LUNS, sizeof(*curlun), GFP_KERNEL);
 	if (unlikely(!curlun))
 		return -ENOMEM;
 

@@ -2796,8 +2796,6 @@ int fsg_common_set_nluns(struct fsg_comm
 	common->luns = curlun;
 	common->nluns = nluns;
 
-	pr_info("Number of LUNs=%d\n", common->nluns);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_nluns);

@@ -3563,14 +3561,26 @@ static struct usb_function *fsg_alloc(st
 	struct fsg_opts *opts = fsg_opts_from_func_inst(fi);
 	struct fsg_common *common = opts->common;
 	struct fsg_dev *fsg;
+	unsigned nluns, i;
 
 	fsg = kzalloc(sizeof(*fsg), GFP_KERNEL);
 	if (unlikely(!fsg))
 		return ERR_PTR(-ENOMEM);
 
 	mutex_lock(&opts->lock);
+	if (!opts->refcnt) {
+		for (nluns = i = 0; i < FSG_MAX_LUNS; ++i)
+			if (common->luns[i])
+				nluns = i + 1;
+		if (!nluns)
+			pr_warn("No LUNS defined, continuing anyway\n");
+		else
+			common->nluns = nluns;
+		pr_info("Number of LUNs=%u\n", common->nluns);
+	}
 	opts->refcnt++;
 	mutex_unlock(&opts->lock);
+
 	fsg->function.name	= FSG_DRIVER_DESC;
 	fsg->function.bind	= fsg_bind;
 	fsg->function.unbind	= fsg_unbind;

---
 drivers/usb/musb/musb_virthub.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
@@ -273,9 +273,7 @@ static int musb_has_gadget(struct musb *
 #ifdef CONFIG_USB_MUSB_HOST
 	return 1;
 #else
-	if (musb->port_mode == MUSB_PORT_MODE_HOST)
-		return 1;
-	return musb->g.dev.driver != NULL;
+	return musb->port_mode == MUSB_PORT_MODE_HOST;
 #endif
 }
 

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)
@@ -187,6 +187,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
 	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
 	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
+	{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */

T:  Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=4000 Rev=03.00
S:  Manufacturer=Network Connect
S:  Product=MT6225
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)
@@ -1765,6 +1765,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },                /* OLICARD300 - MT6225 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
 	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
 	{ } /* Terminating entry */

---
 drivers/usb/serial/usb-serial.c |    1 +
 1 file changed, 1 insertion(+)
@@ -1306,6 +1306,7 @@ static void __exit usb_serial_exit(void)
 	tty_unregister_driver(usb_serial_tty_driver);
 	put_tty_driver(usb_serial_tty_driver);
 	bus_unregister(&usb_serial_bus_type);
+	idr_destroy(&serial_minors);
 }
 
 

---
 drivers/usb/host/ohci-q.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
@@ -980,10 +980,6 @@ rescan_all:
 		int			completed, modified;
 		__hc32			*prev;
 
-		/* Is this ED already invisible to the hardware? */
-		if (ed->state == ED_IDLE)
-			goto ed_idle;
-
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */

@@ -1011,12 +1007,10 @@ skip_ed:
 		}
 
 		/* ED's now officially unlinked, hc doesn't see */
-		ed->state = ED_IDLE;
 		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
 		ed->hwNextED = 0;
 		wmb();
 		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
-ed_idle:
 
 		/* reentrancy:  if we drop the schedule lock, someone might
 		 * have modified this list.  normally it's just prepending

@@ -1087,6 +1081,7 @@ rescan_this:
 		if (list_empty(&ed->td_list)) {
 			*last = ed->ed_next;
 			ed->ed_next = NULL;
+			ed->state = ED_IDLE;
 			list_del(&ed->in_use_list);
 		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
 			*last = ed->ed_next;

---
 drivers/usb/core/hcd.c |    7 +++++--
 drivers/usb/core/hub.c |    2 +-
 drivers/usb/core/usb.h |    1 +
 3 files changed, 7 insertions(+), 3 deletions(-)
@@ -1022,9 +1022,12 @@ static int register_root_hub(struct usb_
 				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
-	if (usb_dev->speed == USB_SPEED_SUPER) {
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(usb_dev);
-		if (retval < 0) {
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed == USB_SPEED_SUPER) {
 			mutex_unlock(&usb_bus_list_lock);
 			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
 					dev_name(&usb_dev->dev), retval);

@@ -122,7 +122,7 @@ struct usb_hub *usb_hub_to_struct_hub(st
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
 {
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.

@@ -65,6 +65,7 @@ extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
 
 #ifdef	CONFIG_PM
 

		virt_dev->ring_cache[rings_cached] =
			virt_dev->eps[ep_index].ring;
		virt_dev->num_rings_cached++;
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
		virt_dev->num_rings_cached--;
This is bug in manipulating the index of ring cache.
And it should be as below:
		virt_dev->num_rings_cached--;
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
---
 drivers/usb/host/xhci-mem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
 			return -ENOMEM;
+		virt_dev->num_rings_cached--;
 		virt_dev->eps[ep_index].new_ring =
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
-		virt_dev->num_rings_cached--;
 		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
 					1, type);
 	}

---
 drivers/md/dm-cache-policy-cleaner.c  |    3 +
 drivers/md/dm-cache-policy-internal.h |    5 +-
 drivers/md/dm-cache-policy-mq.c       |   41 ++++++++++++++++--------
 drivers/md/dm-cache-policy.h          |   15 ++++++++
 drivers/md/dm-cache-target.c          |   58 ++++++++++++++++++++++------------
 5 files changed, 85 insertions(+), 37 deletions(-)
@@ -171,7 +171,8 @@ static void remove_cache_hash_entry(stru
 /* Public interface (see dm-cache-policy.h */
 static int wb_map(struct dm_cache_policy *pe, dm_oblock_t oblock,
 		  bool can_block, bool can_migrate, bool discarded_oblock,
-		  struct bio *bio, struct policy_result *result)
+		  struct bio *bio, struct policy_locker *locker,
+		  struct policy_result *result)
 {
 	struct policy *p = to_policy(pe);
 	struct wb_cache_entry *e;

@@ -16,9 +16,10 @@
  */
 static inline int policy_map(struct dm_cache_policy *p, dm_oblock_t oblock,
 			     bool can_block, bool can_migrate, bool discarded_oblock,
-			     struct bio *bio, struct policy_result *result)
+			     struct bio *bio, struct policy_locker *locker,
+			     struct policy_result *result)
 {
-	return p->map(p, oblock, can_block, can_migrate, discarded_oblock, bio, result);
+	return p->map(p, oblock, can_block, can_migrate, discarded_oblock, bio, locker, result);
 }
 
 static inline int policy_lookup(struct dm_cache_policy *p, dm_oblock_t oblock, dm_cblock_t *cblock)

@@ -70,6 +70,18 @@ enum policy_operation {
 };
 
 /*
+ * When issuing a POLICY_REPLACE the policy needs to make a callback to
+ * lock the block being demoted.  This doesn't need to occur during a
+ * writeback operation since the block remains in the cache.
+ */
+struct policy_locker;
+typedef int (*policy_lock_fn)(struct policy_locker *l, dm_oblock_t oblock);
+
+struct policy_locker {
+	policy_lock_fn fn;
+};
+
+/*
  * This is the instruction passed back to the core target.
  */
 struct policy_result {

@@ -122,7 +134,8 @@ struct dm_cache_policy {
 	 */
 	int (*map)(struct dm_cache_policy *p, dm_oblock_t oblock,
 		   bool can_block, bool can_migrate, bool discarded_oblock,
-		   struct bio *bio, struct policy_result *result);
+		   struct bio *bio, struct policy_locker *locker,
+		   struct policy_result *result);
 
 	/*
 	 * Sometimes we want to see if a block is in the cache, without

---
 drivers/md/dm-stats.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -795,6 +795,8 @@ static int message_stats_create(struct m
 		return -EINVAL;
 
 	if (sscanf(argv[2], "/%u%c", &divisor, &dummy) == 1) {
+		if (!divisor)
+			return -EINVAL;
 		step = end - start;
 		if (do_div(step, divisor))
 			step++;

---
 drivers/md/persistent-data/dm-space-map-metadata.c |   50 ++++++++++++++-------
 1 file changed, 35 insertions(+), 15 deletions(-)
@@ -204,6 +204,27 @@ static void in(struct sm_metadata *smm)
 	smm->recursion_count++;
 }
 
+static int apply_bops(struct sm_metadata *smm)
+{
+	int r = 0;
+
+	while (!brb_empty(&smm->uncommitted)) {
+		struct block_op bop;
+
+		r = brb_pop(&smm->uncommitted, &bop);
+		if (r) {
+			DMERR("bug in bop ring buffer");
+			break;
+		}
+
+		r = commit_bop(smm, &bop);
+		if (r)
+			break;
+	}
+
+	return r;
+}
+
 static int out(struct sm_metadata *smm)
 {
 	int r = 0;

@@ -216,21 +237,8 @@ static int out(struct sm_metadata *smm)
 		return -ENOMEM;
 	}
 
-	if (smm->recursion_count == 1) {
-		while (!brb_empty(&smm->uncommitted)) {
-			struct block_op bop;
-
-			r = brb_pop(&smm->uncommitted, &bop);
-			if (r) {
-				DMERR("bug in bop ring buffer");
-				break;
-			}
-
-			r = commit_bop(smm, &bop);
-			if (r)
-				break;
-		}
-	}
+	if (smm->recursion_count == 1)
+		apply_bops(smm);
 
 	smm->recursion_count--;
 

@@ -704,6 +712,12 @@ static int sm_metadata_extend(struct dm_
 		}
 		old_len = smm->begin;
 
+		r = apply_bops(smm);
+		if (r) {
+			DMERR("%s: apply_bops failed", __func__);
+			goto out;
+		}
+
 		r = sm_ll_commit(&smm->ll);
 		if (r)
 			goto out;

@@ -773,6 +787,12 @@ int dm_sm_metadata_create(struct dm_spac
 	if (r)
 		return r;
 
+	r = apply_bops(smm);
+	if (r) {
+		DMERR("%s: apply_bops failed", __func__);
+		return r;
+	}
+
 	return sm_metadata_commit(sm);
 }
 

---
 drivers/md/persistent-data/dm-btree-remove.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
@@ -309,8 +309,8 @@ static void redistribute3(struct dm_btre
 
 		if (s < 0 && nr_center < -s) {
 			/* not enough in central node */
-			shift(left, center, nr_center);
-			s = nr_center - target;
+			shift(left, center, -nr_center);
+			s += nr_center;
 			shift(left, right, s);
 			nr_right += s;
 		} else

@@ -323,7 +323,7 @@ static void redistribute3(struct dm_btre
 		if (s > 0 && nr_center < s) {
 			/* not enough in central node */
 			shift(center, right, nr_center);
-			s = target - nr_center;
+			s -= nr_center;
 			shift(left, right, s);
 			nr_left -= s;
 		} else

---
 drivers/md/dm-thin.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/sort.h>
 #include <linux/rbtree.h>
 

@@ -260,7 +261,7 @@ struct pool {
 	process_mapping_fn process_prepared_mapping;
 	process_mapping_fn process_prepared_discard;
 
-	struct dm_bio_prison_cell *cell_sort_array[CELL_SORT_ARRAY_SIZE];
+	struct dm_bio_prison_cell **cell_sort_array;
 };
 
 static enum pool_mode get_pool_mode(struct pool *pool);

@@ -2499,6 +2500,7 @@ static void __pool_destroy(struct pool *
 {
 	__pool_table_remove(pool);
 
+	vfree(pool->cell_sort_array);
 	if (dm_pool_metadata_close(pool->pmd) < 0)
 		DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
 

@@ -2611,6 +2613,13 @@ static struct pool *pool_create(struct m
 		goto bad_mapping_pool;
 	}
 
+	pool->cell_sort_array = vmalloc(sizeof(*pool->cell_sort_array) * CELL_SORT_ARRAY_SIZE);
+	if (!pool->cell_sort_array) {
+		*error = "Error allocating cell sort array";
+		err_p = ERR_PTR(-ENOMEM);
+		goto bad_sort_array;
+	}
+
 	pool->ref_count = 1;
 	pool->last_commit_jiffies = jiffies;
 	pool->pool_md = pool_md;

@@ -2619,6 +2628,8 @@ static struct pool *pool_create(struct m
 
 	return pool;
 
+bad_sort_array:
+	mempool_destroy(pool->mapping_pool);
 bad_mapping_pool:
 	dm_deferred_set_destroy(pool->all_io_ds);
 bad_all_io_ds:

---
 drivers/md/persistent-data/dm-btree.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -255,7 +255,7 @@ int dm_btree_del(struct dm_btree_info *i
 	int r;
 	struct del_stack *s;
 
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	s = kmalloc(sizeof(*s), GFP_NOIO);
 	if (!s)
 		return -ENOMEM;
 	s->info = info;

---
 drivers/mmc/card/block.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -208,6 +208,8 @@ static ssize_t power_ro_lock_show(struct
 
 	ret = snprintf(buf, PAGE_SIZE, "%d\n", locked);
 
+	mmc_blk_put(md);
+
 	return ret;
 }
 

---
 drivers/block/loop.c |   30 ++++++++++++++----------------
 drivers/block/loop.h |    1 +
 2 files changed, 15 insertions(+), 16 deletions(-)
@@ -86,8 +86,6 @@ static DEFINE_MUTEX(loop_index_mutex);
 static int max_part;
 static int part_shift;
 
-static struct workqueue_struct *loop_wq;
-
 static int transfer_xor(struct loop_device *lo, int cmd,
 			struct page *raw_page, unsigned raw_off,
 			struct page *loop_page, unsigned loop_off,

@@ -725,6 +723,12 @@ static int loop_set_fd(struct loop_devic
 	size = get_loop_size(lo, file);
 	if ((loff_t)(sector_t)size != size)
 		goto out_putf;
+	error = -ENOMEM;
+	lo->wq = alloc_workqueue("kloopd%d",
+			WQ_MEM_RECLAIM | WQ_HIGHPRI | WQ_UNBOUND, 0,
+			lo->lo_number);
+	if (!lo->wq)
+		goto out_putf;
 
 	error = 0;
 

@@ -872,6 +876,8 @@ static int loop_clr_fd(struct loop_devic
 	lo->lo_flags = 0;
 	if (!part_shift)
 		lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
+	destroy_workqueue(lo->wq);
+	lo->wq = NULL;
 	mutex_unlock(&lo->lo_ctl_mutex);
 	/*
 	 * Need not hold lo_ctl_mutex to fput backing file.

@@ -1425,9 +1431,13 @@ static int loop_queue_rq(struct blk_mq_h
 		const struct blk_mq_queue_data *bd)
 {
 	struct loop_cmd *cmd = blk_mq_rq_to_pdu(bd->rq);
+	struct loop_device *lo = cmd->rq->q->queuedata;
 
 	blk_mq_start_request(bd->rq);
 
+	if (lo->lo_state != Lo_bound)
+		return -EIO;
+
 	if (cmd->rq->cmd_flags & REQ_WRITE) {
 		struct loop_device *lo = cmd->rq->q->queuedata;
 		bool need_sched = true;

@@ -1441,9 +1451,9 @@ static int loop_queue_rq(struct blk_mq_h
 		spin_unlock_irq(&lo->lo_lock);
 
 		if (need_sched)
-			queue_work(loop_wq, &lo->write_work);
+			queue_work(lo->wq, &lo->write_work);
 	} else {
-		queue_work(loop_wq, &cmd->read_work);
+		queue_work(lo->wq, &cmd->read_work);
 	}
 
 	return BLK_MQ_RQ_QUEUE_OK;

@@ -1455,9 +1465,6 @@ static void loop_handle_cmd(struct loop_
 	struct loop_device *lo = cmd->rq->q->queuedata;
 	int ret = -EIO;
 
-	if (lo->lo_state != Lo_bound)
-		goto failed;
-
 	if (write && (lo->lo_flags & LO_FLAGS_READ_ONLY))
 		goto failed;
 

@@ -1806,13 +1813,6 @@ static int __init loop_init(void)
 		goto misc_out;
 	}
 
-	loop_wq = alloc_workqueue("kloopd",
-			WQ_MEM_RECLAIM | WQ_HIGHPRI | WQ_UNBOUND, 0);
-	if (!loop_wq) {
-		err = -ENOMEM;
-		goto misc_out;
-	}
-
 	blk_register_region(MKDEV(LOOP_MAJOR, 0), range,
 				  THIS_MODULE, loop_probe, NULL, NULL);
 

@@ -1850,8 +1850,6 @@ static void __exit loop_exit(void)
 	blk_unregister_region(MKDEV(LOOP_MAJOR, 0), range);
 	unregister_blkdev(LOOP_MAJOR, "loop");
 
-	destroy_workqueue(loop_wq);
-
 	misc_deregister(&loop_misc);
 }
 

@@ -54,6 +54,7 @@ struct loop_device {
 	gfp_t		old_gfp_mask;
 
 	spinlock_t		lo_lock;
+	struct workqueue_struct *wq;
 	struct list_head	write_cmd_head;
 	struct work_struct	write_work;
 	bool			write_started;

---
 drivers/block/loop.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -725,7 +725,7 @@ static int loop_set_fd(struct loop_devic
 		goto out_putf;
 	error = -ENOMEM;
 	lo->wq = alloc_workqueue("kloopd%d",
-			WQ_MEM_RECLAIM | WQ_HIGHPRI | WQ_UNBOUND, 0,
+			WQ_MEM_RECLAIM | WQ_HIGHPRI | WQ_UNBOUND, 16,
 			lo->lo_number);
 	if (!lo->wq)
 		goto out_putf;

---
 block/bio.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
@@ -1814,8 +1814,9 @@ EXPORT_SYMBOL(bio_endio_nodec);
  * Allocates and returns a new bio which represents @sectors from the start of
  * @bio, and updates @bio to represent the remaining sectors.
  *
- * The newly allocated bio will point to @bio's bi_io_vec; it is the caller's
- * responsibility to ensure that @bio is not freed before the split.
+ * Unless this is a discard request the newly allocated bio will point
+ * to @bio's bi_io_vec; it is the caller's responsibility to ensure that
+ * @bio is not freed before the split.
  */
 struct bio *bio_split(struct bio *bio, int sectors,
 		      gfp_t gfp, struct bio_set *bs)

@@ -1825,7 +1826,15 @@ struct bio *bio_split(struct bio *bio, i
 	BUG_ON(sectors <= 0);
 	BUG_ON(sectors >= bio_sectors(bio));
 
-	split = bio_clone_fast(bio, gfp, bs);
+	/*
+	 * Discards need a mutable bio_vec to accommodate the payload
+	 * required by the DSM TRIM and UNMAP commands.
+	 */
+	if (bio->bi_rw & REQ_DISCARD)
+		split = bio_clone_bioset(bio, gfp, bs);
+	else
+		split = bio_clone_fast(bio, gfp, bs);
+
 	if (!split)
 		return NULL;
 

---
 arch/arm/boot/dts/at91-sama5d4ek.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -108,8 +108,8 @@
 			mmc0: mmc@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@1 {
-					reg = <1>;
+				slot@0 {
+					reg = <0>;
 					bus-width = <4>;
 					cd-gpios = <&pioE 5 0>;
 				};

---
 arch/arm/boot/dts/sama5d4.dtsi |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
@@ -1125,10 +1125,10 @@
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(41)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(40)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";

@@ -1139,10 +1139,10 @@
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(42)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(43)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
 				dma-names = "tx", "rx";
 				clocks = <&tdes_clk>;
 				clock-names = "tdes_clk";

@@ -1153,8 +1153,8 @@
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(44)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";

---
 Documentation/devicetree/bindings/usb/atmel-usb.txt |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
@@ -60,9 +60,9 @@ Atmel High-Speed USB device controller
 
 Required properties:
  - compatible: Should be one of the following
-	       "at91sam9rl-udc"
-	       "at91sam9g45-udc"
-	       "sama5d3-udc"
+	       "atmel,at91sam9rl-udc"
+	       "atmel,at91sam9g45-udc"
+	       "atmel,sama5d3-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - ep childnode: To specify the number of endpoints and their properties.

---
 arch/arm/boot/dts/at91sam9g45.dtsi |    2 +-
 arch/arm/boot/dts/at91sam9x5.dtsi  |    2 +-
 arch/arm/boot/dts/sama5d3.dtsi     |    2 +-
 arch/arm/boot/dts/sama5d4.dtsi     |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
@@ -1148,7 +1148,7 @@
 			usb2: gadget@fff78000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;

@@ -1062,7 +1062,7 @@
 			usb2: gadget@f803c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;

@@ -1321,7 +1321,7 @@
 		usb0: gadget@00500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;

@@ -123,7 +123,7 @@
 		usb0: gadget@00400000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
 			       0xfc02c000 0x4000>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;

---
 drivers/bus/arm-ccn.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -212,7 +212,7 @@ static int arm_ccn_node_to_xp_port(int n
 
 static void arm_ccn_pmu_config_set(u64 *config, u32 node_xp, u32 type, u32 port)
 {
-	*config &= ~((0xff << 0) | (0xff << 8) | (0xff << 24));
+	*config &= ~((0xff << 0) | (0xff << 8) | (0x3 << 24));
 	*config |= (node_xp << 0) | (type << 8) | (port << 24);
 }
 

---
 drivers/gpu/drm/vgem/vgem_drv.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -328,6 +328,8 @@ static int __init vgem_init(void)
 		goto out;
 	}
 
+	drm_dev_set_unique(vgem_device, "vgem");
+
 	ret  = drm_dev_register(vgem_device, 0);
 
 	if (ret)

---
 drivers/gpu/drm/drm_dp_mst_topology.c |   40 ++++++++++++++++++++++++++++++++--
 include/drm/drm_crtc.h                |    2 +
 include/drm/drm_dp_mst_helper.h       |    4 +++
 3 files changed, 44 insertions(+), 2 deletions(-)
@@ -867,8 +867,16 @@ static void drm_dp_destroy_port(struct k
 		port->vcpi.num_slots = 0;
 
 		kfree(port->cached_edid);
-		if (port->connector)
-			(*port->mgr->cbs->destroy_connector)(mgr, port->connector);
+
+		/* we can't destroy the connector here, as
+		   we might be holding the mode_config.mutex
+		   from an EDID retrieval */
+		if (port->connector) {
+			mutex_lock(&mgr->destroy_connector_lock);
+			list_add(&port->connector->destroy_list, &mgr->destroy_connector_list);
+			mutex_unlock(&mgr->destroy_connector_lock);
+			schedule_work(&mgr->destroy_connector_work);
+		}
 		drm_dp_port_teardown_pdt(port, port->pdt);
 
 		if (!port->input && port->vcpi.vcpi > 0)

@@ -2632,6 +2640,30 @@ static void drm_dp_tx_work(struct work_s
 	mutex_unlock(&mgr->qlock);
 }
 
+static void drm_dp_destroy_connector_work(struct work_struct *work)
+{
+	struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, destroy_connector_work);
+	struct drm_connector *connector;
+
+	/*
+	 * Not a regular list traverse as we have to drop the destroy
+	 * connector lock before destroying the connector, to avoid AB->BA
+	 * ordering between this lock and the config mutex.
+	 */
+	for (;;) {
+		mutex_lock(&mgr->destroy_connector_lock);
+		connector = list_first_entry_or_null(&mgr->destroy_connector_list, struct drm_connector, destroy_list);
+		if (!connector) {
+			mutex_unlock(&mgr->destroy_connector_lock);
+			break;
+		}
+		list_del(&connector->destroy_list);
+		mutex_unlock(&mgr->destroy_connector_lock);
+
+		mgr->cbs->destroy_connector(mgr, connector);
+	}
+}
+
 /**
  * drm_dp_mst_topology_mgr_init - initialise a topology manager
  * @mgr: manager struct to initialise

@@ -2651,10 +2683,13 @@ int drm_dp_mst_topology_mgr_init(struct
 	mutex_init(&mgr->lock);
 	mutex_init(&mgr->qlock);
 	mutex_init(&mgr->payload_lock);
+	mutex_init(&mgr->destroy_connector_lock);
 	INIT_LIST_HEAD(&mgr->tx_msg_upq);
 	INIT_LIST_HEAD(&mgr->tx_msg_downq);
+	INIT_LIST_HEAD(&mgr->destroy_connector_list);
 	INIT_WORK(&mgr->work, drm_dp_mst_link_probe_work);
 	INIT_WORK(&mgr->tx_work, drm_dp_tx_work);
+	INIT_WORK(&mgr->destroy_connector_work, drm_dp_destroy_connector_work);
 	init_waitqueue_head(&mgr->tx_waitq);
 	mgr->dev = dev;
 	mgr->aux = aux;

@@ -2679,6 +2714,7 @@ EXPORT_SYMBOL(drm_dp_mst_topology_mgr_in
  */
 void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr)
 {
+	flush_work(&mgr->destroy_connector_work);
 	mutex_lock(&mgr->payload_lock);
 	kfree(mgr->payloads);
 	mgr->payloads = NULL;

@@ -731,6 +731,8 @@ struct drm_connector {
 	uint8_t num_h_tile, num_v_tile;
 	uint8_t tile_h_loc, tile_v_loc;
 	uint16_t tile_h_size, tile_v_size;
+
+	struct list_head destroy_list;
 };
 
 /**

@@ -463,6 +463,10 @@ struct drm_dp_mst_topology_mgr {
 	struct work_struct work;
 
 	struct work_struct tx_work;
+
+	struct list_head destroy_connector_list;
+	struct mutex destroy_connector_lock;
+	struct work_struct destroy_connector_work;
 };
 
 int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, struct device *dev, struct drm_dp_aux *aux, int max_dpcd_transaction_bytes, int max_payloads, int conn_base_id);

---
 drivers/gpu/drm/drm_dp_mst_topology.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -1171,6 +1171,8 @@ static struct drm_dp_mst_branch *drm_dp_
 	struct drm_dp_mst_port *port;
 	int i;
 	/* find the port by iterating down */
+
+	mutex_lock(&mgr->lock);
 	mstb = mgr->mst_primary;
 
 	for (i = 0; i < lct - 1; i++) {

@@ -1190,6 +1192,7 @@ static struct drm_dp_mst_branch *drm_dp_
 		}
 	}
 	kref_get(&mstb->kref);
+	mutex_unlock(&mgr->lock);
 	return mstb;
 }
 

---
 drivers/gpu/drm/drm_dp_mst_topology.c |   24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)
@@ -1200,7 +1200,7 @@ static void drm_dp_check_and_send_link_a
 					       struct drm_dp_mst_branch *mstb)
 {
 	struct drm_dp_mst_port *port;
-
+	struct drm_dp_mst_branch *mstb_child;
 	if (!mstb->link_address_sent) {
 		drm_dp_send_link_address(mgr, mstb);
 		mstb->link_address_sent = true;

@@ -1215,17 +1215,31 @@ static void drm_dp_check_and_send_link_a
 		if (!port->available_pbn)
 			drm_dp_send_enum_path_resources(mgr, mstb, port);
 
-		if (port->mstb)
-			drm_dp_check_and_send_link_address(mgr, port->mstb);
+		if (port->mstb) {
+			mstb_child = drm_dp_get_validated_mstb_ref(mgr, port->mstb);
+			if (mstb_child) {
+				drm_dp_check_and_send_link_address(mgr, mstb_child);
+				drm_dp_put_mst_branch_device(mstb_child);
+			}
+		}
 	}
 }
 
 static void drm_dp_mst_link_probe_work(struct work_struct *work)
 {
 	struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, work);
+	struct drm_dp_mst_branch *mstb;
 
-	drm_dp_check_and_send_link_address(mgr, mgr->mst_primary);
-
+	mutex_lock(&mgr->lock);
+	mstb = mgr->mst_primary;
+	if (mstb) {
+		kref_get(&mstb->kref);
+	}
+	mutex_unlock(&mgr->lock);
+	if (mstb) {
+		drm_dp_check_and_send_link_address(mgr, mstb);
+		drm_dp_put_mst_branch_device(mstb);
+	}
 }
 
 static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,

---
 drivers/gpu/drm/tegra/dpaux.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)
@@ -72,34 +72,32 @@ static inline void tegra_dpaux_writel(st
 static void tegra_dpaux_write_fifo(struct tegra_dpaux *dpaux, const u8 *buffer,
 				   size_t size)
 {
-	unsigned long offset = DPAUX_DP_AUXDATA_WRITE(0);
 	size_t i, j;
 
-	for (i = 0; i < size; i += 4) {
-		size_t num = min_t(size_t, size - i, 4);
+	for (i = 0; i < DIV_ROUND_UP(size, 4); i++) {
+		size_t num = min_t(size_t, size - i * 4, 4);
 		unsigned long value = 0;
 
 		for (j = 0; j < num; j++)
-			value |= buffer[i + j] << (j * 8);
+			value |= buffer[i * 4 + j] << (j * 8);
 
-		tegra_dpaux_writel(dpaux, value, offset++);
+		tegra_dpaux_writel(dpaux, value, DPAUX_DP_AUXDATA_WRITE(i));
 	}
 }
 
 static void tegra_dpaux_read_fifo(struct tegra_dpaux *dpaux, u8 *buffer,
 				  size_t size)
 {
-	unsigned long offset = DPAUX_DP_AUXDATA_READ(0);
 	size_t i, j;
 
-	for (i = 0; i < size; i += 4) {
-		size_t num = min_t(size_t, size - i, 4);
+	for (i = 0; i < DIV_ROUND_UP(size, 4); i++) {
+		size_t num = min_t(size_t, size - i * 4, 4);
 		unsigned long value;
 
-		value = tegra_dpaux_readl(dpaux, offset++);
+		value = tegra_dpaux_readl(dpaux, DPAUX_DP_AUXDATA_READ(i));
 
 		for (j = 0; j < num; j++)
-			buffer[i + j] = value >> (j * 8);
+			buffer[i * 4 + j] = value >> (j * 8);
 	}
 }
 

---
 drivers/gpu/drm/qxl/qxl_cmd.c |    1 +
 1 file changed, 1 insertion(+)
@@ -505,6 +505,7 @@ int qxl_hw_surface_alloc(struct qxl_devi
 
 	cmd = (struct qxl_surface_cmd *)qxl_release_map(qdev, release);
 	cmd->type = QXL_SURFACE_CMD_CREATE;
+	cmd->flags = QXL_SURF_FLAG_KEEP_DATA;
 	cmd->u.surface_create.format = surf->surf.format;
 	cmd->u.surface_create.width = surf->surf.width;
 	cmd->u.surface_create.height = surf->surf.height;

---
 drivers/gpu/drm/qxl/qxl_ioctl.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
@@ -122,8 +122,10 @@ static struct qxl_bo *qxlhw_handle_to_bo
 	qobj = gem_to_qxl_bo(gobj);
 
 	ret = qxl_release_list_add(release, qobj);
-	if (ret)
+	if (ret) {
+		drm_gem_object_unreference_unlocked(gobj);
 		return NULL;
+	}
 
 	return qobj;
 }

---
 drivers/gpu/drm/bridge/ptn3460.c |    1 +
 1 file changed, 1 insertion(+)
@@ -15,6 +15,7 @@
 
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>

---
 include/drm/drm_atomic.h |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
@@ -77,26 +77,26 @@ int __must_check drm_atomic_async_commit
 
 #define for_each_connector_in_state(state, connector, connector_state, __i) \
 	for ((__i) = 0;							\
-	     (connector) = (state)->connectors[__i],			\
-	     (connector_state) = (state)->connector_states[__i],	\
-	     (__i) < (state)->num_connector;				\
+	     (__i) < (state)->num_connector &&				\
+	     ((connector) = (state)->connectors[__i],			\
+	     (connector_state) = (state)->connector_states[__i], 1); 	\
 	     (__i)++)							\
 		if (connector)
 
 #define for_each_crtc_in_state(state, crtc, crtc_state, __i)	\
 	for ((__i) = 0;						\
-	     (crtc) = (state)->crtcs[__i],			\
-	     (crtc_state) = (state)->crtc_states[__i],		\
-	     (__i) < (state)->dev->mode_config.num_crtc;	\
+	     (__i) < (state)->dev->mode_config.num_crtc &&	\
+	     ((crtc) = (state)->crtcs[__i],			\
+	     (crtc_state) = (state)->crtc_states[__i], 1);	\
 	     (__i)++)						\
 		if (crtc_state)
 
-#define for_each_plane_in_state(state, plane, plane_state, __i)	\
-	for ((__i) = 0;						\
-	     (plane) = (state)->planes[__i],			\
-	     (plane_state) = (state)->plane_states[__i],	\
-	     (__i) < (state)->dev->mode_config.num_total_plane;	\
-	     (__i)++)						\
+#define for_each_plane_in_state(state, plane, plane_state, __i)		\
+	for ((__i) = 0;							\
+	     (__i) < (state)->dev->mode_config.num_total_plane &&	\
+	     ((plane) = (state)->planes[__i],				\
+	     (plane_state) = (state)->plane_states[__i], 1);		\
+	     (__i)++)							\
 		if (plane_state)
 
 #endif /* DRM_ATOMIC_H_ */

---
 drivers/gpu/drm/radeon/radeon_irq_kms.c |    2 ++
 1 file changed, 2 insertions(+)
@@ -79,10 +79,12 @@ static void radeon_hotplug_work_func(str
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 
+	mutex_lock(&mode_config->mutex);
 	if (mode_config->num_connector) {
 		list_for_each_entry(connector, &mode_config->connector_list, head)
 			radeon_connector_hotplug(connector);
 	}
+	mutex_unlock(&mode_config->mutex);
 	/* Just fire off a uevent and let userspace tell us what to do */
 	drm_helper_hpd_irq_event(dev);
 }

---
 drivers/gpu/drm/radeon/radeon_audio.c |   18 +++++++++---------
 drivers/gpu/drm/radeon/radeon_audio.h |    2 --
 2 files changed, 9 insertions(+), 11 deletions(-)
@@ -242,6 +242,13 @@ static struct radeon_audio_funcs dce6_dp
 	.dpms = evergreen_dp_enable,
 };
 
+static void radeon_audio_enable(struct radeon_device *rdev,
+				struct r600_audio_pin *pin, u8 enable_mask)
+{
+	if (rdev->audio.funcs->enable)
+		rdev->audio.funcs->enable(rdev, pin, enable_mask);
+}
+
 static void radeon_audio_interface_init(struct radeon_device *rdev)
 {
 	if (ASIC_IS_DCE6(rdev)) {

@@ -307,7 +314,7 @@ int radeon_audio_init(struct radeon_devi
 
 	/* disable audio.  it will be set up later */
 	for (i = 0; i < rdev->audio.num_pins; i++)
-		radeon_audio_enable(rdev, &rdev->audio.pin[i], false);
+		radeon_audio_enable(rdev, &rdev->audio.pin[i], 0);
 
 	return 0;
 }

@@ -443,13 +450,6 @@ static void radeon_audio_select_pin(stru
 		radeon_encoder->audio->select_pin(encoder);
 }
 
-void radeon_audio_enable(struct radeon_device *rdev,
-	struct r600_audio_pin *pin, u8 enable_mask)
-{
-	if (rdev->audio.funcs->enable)
-		rdev->audio.funcs->enable(rdev, pin, enable_mask);
-}
-
 void radeon_audio_detect(struct drm_connector *connector,
 			 enum drm_connector_status status)
 {

@@ -502,7 +502,7 @@ void radeon_audio_fini(struct radeon_dev
 		return;
 
 	for (i = 0; i < rdev->audio.num_pins; i++)
-		radeon_audio_enable(rdev, &rdev->audio.pin[i], false);
+		radeon_audio_enable(rdev, &rdev->audio.pin[i], 0);
 
 	rdev->audio.enabled = false;
 }

@@ -74,8 +74,6 @@ u32 radeon_audio_endpoint_rreg(struct ra
 void radeon_audio_endpoint_wreg(struct radeon_device *rdev,
 	u32 offset,	u32 reg, u32 v);
 struct r600_audio_pin *radeon_audio_get_pin(struct drm_encoder *encoder);
-void radeon_audio_enable(struct radeon_device *rdev,
-	struct r600_audio_pin *pin, u8 enable_mask);
 void radeon_audio_fini(struct radeon_device *rdev);
 void radeon_audio_mode_set(struct drm_encoder *encoder,
 	struct drm_display_mode *mode);

---
 drivers/gpu/drm/i915/i915_gem_gtt.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
@@ -502,17 +502,17 @@ static void gen8_ppgtt_clear_range(struc
 		struct page *page_table;
 
 		if (WARN_ON(!ppgtt->pdp.page_directory[pdpe]))
-			continue;
+			break;
 
 		pd = ppgtt->pdp.page_directory[pdpe];
 
 		if (WARN_ON(!pd->page_table[pde]))
-			continue;
+			break;
 
 		pt = pd->page_table[pde];
 
 		if (WARN_ON(!pt->page))
-			continue;
+			break;
 
 		page_table = pt->page;
 

---
 drivers/gpu/drm/i915/i915_gem_tiling.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
@@ -183,8 +183,18 @@ i915_gem_detect_bit_6_swizzle(struct drm
 		if (IS_GEN4(dev)) {
 			uint32_t ddc2 = I915_READ(DCC2);
 
-			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE))
+			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE)) {
+				/* Since the swizzling may vary within an
+				 * object, we have no idea what the swizzling
+				 * is for any page in particular. Thus we
+				 * cannot migrate tiled pages using the GPU,
+				 * nor can we tell userspace what the exact
+				 * swizzling is for any object.
+				 */
 				dev_priv->quirks |= QUIRK_PIN_SWIZZLED_PAGES;
+				swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+				swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+			}
 		}
 
 		if (dcc == 0xffffffff) {

Author: John Harrison <[email protected]>
Date:   Mon Nov 24 18:49:40 2014 +0000
---
 drivers/gpu/drm/i915/i915_gem.c         |    1 +
 drivers/gpu/drm/i915/i915_irq.c         |   13 +++----------
 drivers/gpu/drm/i915/intel_ringbuffer.h |    7 +++++++
 3 files changed, 11 insertions(+), 10 deletions(-)
@@ -2401,6 +2401,7 @@ int __i915_add_request(struct intel_engi
 	}
 
 	request->emitted_jiffies = jiffies;
+	ring->last_submitted_seqno = request->seqno;
 	list_add_tail(&request->list, &ring->request_list);
 	request->file_priv = NULL;
 

@@ -2650,18 +2650,11 @@ static void gen8_disable_vblank(struct d
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 }
 
-static struct drm_i915_gem_request *
-ring_last_request(struct intel_engine_cs *ring)
-{
-	return list_entry(ring->request_list.prev,
-			  struct drm_i915_gem_request, list);
-}
-
 static bool
-ring_idle(struct intel_engine_cs *ring)
+ring_idle(struct intel_engine_cs *ring, u32 seqno)
 {
 	return (list_empty(&ring->request_list) ||
-		i915_gem_request_completed(ring_last_request(ring), false));
+		i915_seqno_passed(seqno, ring->last_submitted_seqno));
 }
 
 static bool

@@ -2883,7 +2876,7 @@ static void i915_hangcheck_elapsed(struc
 		acthd = intel_ring_get_active_head(ring);
 
 		if (ring->hangcheck.seqno == seqno) {
-			if (ring_idle(ring)) {
+			if (ring_idle(ring, seqno)) {
 				ring->hangcheck.action = HANGCHECK_IDLE;
 
 				if (waitqueue_active(&ring->irq_queue)) {

@@ -266,6 +266,13 @@ struct  intel_engine_cs {
 	 * Do we have some not yet emitted requests outstanding?
 	 */
 	struct drm_i915_gem_request *outstanding_lazy_request;
+	/**
+	 * Seqno of request most recently submitted to request_list.
+	 * Used exclusively by hang checker to avoid grabbing lock while
+	 * inspecting request list.
+	 */
+	u32 last_submitted_seqno;
+
 	bool gpu_caches_dirty;
 
 	wait_queue_head_t irq_queue;

---
 drivers/gpu/drm/i915/i915_ioc32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -204,7 +204,7 @@ long i915_compat_ioctl(struct file *filp
 	drm_ioctl_compat_t *fn = NULL;
 	int ret;
 
-	if (nr < DRM_COMMAND_BASE)
+	if (nr < DRM_COMMAND_BASE || nr >= DRM_COMMAND_END)
 		return drm_compat_ioctl(filp, cmd, arg);
 
 	if (nr < DRM_COMMAND_BASE + ARRAY_SIZE(i915_compat_ioctls))

---
 drivers/gpu/drm/i915/i915_gem_tiling.c |   12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
@@ -183,18 +183,8 @@ i915_gem_detect_bit_6_swizzle(struct drm
 		if (IS_GEN4(dev)) {
 			uint32_t ddc2 = I915_READ(DCC2);
 
-			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE)) {
-				/* Since the swizzling may vary within an
-				 * object, we have no idea what the swizzling
-				 * is for any page in particular. Thus we
-				 * cannot migrate tiled pages using the GPU,
-				 * nor can we tell userspace what the exact
-				 * swizzling is for any object.
-				 */
+			if (!(ddc2 & DCC2_MODIFIED_ENHANCED_DISABLE))
 				dev_priv->quirks |= QUIRK_PIN_SWIZZLED_PAGES;
-				swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
-				swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
-			}
 		}
 
 		if (dcc == 0xffffffff) {

---
 drivers/gpu/drm/radeon/radeon_fb.c |    1 -
 1 file changed, 1 deletion(-)
@@ -257,7 +257,6 @@ static int radeonfb_create(struct drm_fb
 	}
 
 	info->par = rfbdev;
-	info->skip_vt_switch = true;
 
 	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
 	if (ret) {

---
 drivers/gpu/drm/radeon/radeon_audio.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
@@ -469,22 +469,22 @@ void radeon_audio_detect(struct drm_conn
 	dig = radeon_encoder->enc_priv;
 
 	if (status == connector_status_connected) {
-		struct radeon_connector *radeon_connector;
-		int sink_type;
-
 		if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) {
 			radeon_encoder->audio = NULL;
 			return;
 		}
 
-		radeon_connector = to_radeon_connector(connector);
-		sink_type = radeon_dp_getsinktype(radeon_connector);
+		if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+			struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 
-		if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
-			sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
-			radeon_encoder->audio = rdev->audio.dp_funcs;
-		else
+			if (radeon_dp_getsinktype(radeon_connector) ==
+			    CONNECTOR_OBJECT_ID_DISPLAYPORT)
+				radeon_encoder->audio = rdev->audio.dp_funcs;
+			else
+				radeon_encoder->audio = rdev->audio.hdmi_funcs;
+		} else {
 			radeon_encoder->audio = rdev->audio.hdmi_funcs;
+		}
 
 		dig->afmt->pin = radeon_audio_get_pin(connector->encoder);
 		radeon_audio_enable(rdev, dig->afmt->pin, 0xf);

---
 drivers/gpu/drm/radeon/si_dpm.c |    1 +
 1 file changed, 1 insertion(+)
@@ -2925,6 +2925,7 @@ static struct si_dpm_quirk si_dpm_quirk_
 	/* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
 	{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
 	{ PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 },
+	{ PCI_VENDOR_ID_ATI, 0x6810, 0x174b, 0xe271, 85000, 90000 },
 	{ 0, 0, 0, 0 },
 };
 

---
 drivers/gpu/drm/radeon/ci_dpm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -5818,7 +5818,7 @@ int ci_dpm_init(struct radeon_device *rd
 			tmp |= DPM_ENABLED;
 			break;
 		default:
-			DRM_ERROR("Invalid PCC GPIO: %u!\n", gpio.shift);
+			DRM_DEBUG("Invalid PCC GPIO: %u!\n", gpio.shift);
 			break;
 		}
 		WREG32_SMC(CNB_PWRMGT_CNTL, tmp);

---
 drivers/gpu/drm/rockchip/rockchip_drm_gem.c |   67 ++++++++++++++--------------
 1 file changed, 34 insertions(+), 33 deletions(-)
@@ -54,55 +54,56 @@ static void rockchip_gem_free_buf(struct
 		       &rk_obj->dma_attrs);
 }
 
-int rockchip_gem_mmap_buf(struct drm_gem_object *obj,
-			  struct vm_area_struct *vma)
+static int rockchip_drm_gem_object_mmap(struct drm_gem_object *obj,
+					struct vm_area_struct *vma)
+
 {
+	int ret;
 	struct rockchip_gem_object *rk_obj = to_rockchip_obj(obj);
 	struct drm_device *drm = obj->dev;
-	unsigned long vm_size;
-
-	vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
-	vm_size = vma->vm_end - vma->vm_start;
 
-	if (vm_size > obj->size)
-		return -EINVAL;
+	/*
+	 * dma_alloc_attrs() allocated a struct page table for rk_obj, so clear
+	 * VM_PFNMAP flag that was set by drm_gem_mmap_obj()/drm_gem_mmap().
+	 */
+	vma->vm_flags &= ~VM_PFNMAP;
 
-	return dma_mmap_attrs(drm->dev, vma, rk_obj->kvaddr, rk_obj->dma_addr,
+	ret = dma_mmap_attrs(drm->dev, vma, rk_obj->kvaddr, rk_obj->dma_addr,
 			     obj->size, &rk_obj->dma_attrs);
+	if (ret)
+		drm_gem_vm_close(vma);
+
+	return ret;
 }
 
-/* drm driver mmap file operations */
-int rockchip_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+int rockchip_gem_mmap_buf(struct drm_gem_object *obj,
+			  struct vm_area_struct *vma)
 {
-	struct drm_file *priv = filp->private_data;
-	struct drm_device *dev = priv->minor->dev;
-	struct drm_gem_object *obj;
-	struct drm_vma_offset_node *node;
+	struct drm_device *drm = obj->dev;
 	int ret;
 
-	if (drm_device_is_unplugged(dev))
-		return -ENODEV;
+	mutex_lock(&drm->struct_mutex);
+	ret = drm_gem_mmap_obj(obj, obj->size, vma);
+	mutex_unlock(&drm->struct_mutex);
+	if (ret)
+		return ret;
 
-	mutex_lock(&dev->struct_mutex);
+	return rockchip_drm_gem_object_mmap(obj, vma);
+}
 
-	node = drm_vma_offset_exact_lookup(dev->vma_offset_manager,
-					   vma->vm_pgoff,
-					   vma_pages(vma));
-	if (!node) {
-		mutex_unlock(&dev->struct_mutex);
-		DRM_ERROR("failed to find vma node.\n");
-		return -EINVAL;
-	} else if (!drm_vma_node_is_allowed(node, filp)) {
-		mutex_unlock(&dev->struct_mutex);
-		return -EACCES;
-	}
+/* drm driver mmap file operations */
+int rockchip_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct drm_gem_object *obj;
+	int ret;
 
-	obj = container_of(node, struct drm_gem_object, vma_node);
-	ret = rockchip_gem_mmap_buf(obj, vma);
+	ret = drm_gem_mmap(filp, vma);
+	if (ret)
+		return ret;
 
-	mutex_unlock(&dev->struct_mutex);
+	obj = vma->vm_private_data;
 
-	return ret;
+	return rockchip_drm_gem_object_mmap(obj, vma);
 }
 
 struct rockchip_gem_object *

---
 drivers/gpu/drm/drm_crtc.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
@@ -2749,8 +2749,11 @@ int drm_mode_setcrtc(struct drm_device *
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	/* For some reason crtc x/y offsets are signed internally. */
-	if (crtc_req->x > INT_MAX || crtc_req->y > INT_MAX)
+	/*
+	 * Universal plane src offsets are only 16.16, prevent havoc for
+	 * drivers using universal plane code internally.
+	 */
+	if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
 		return -ERANGE;
 
 	drm_modeset_lock_all(dev);

---
 drivers/gpu/drm/drm_ioc32.c |   60 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)
@@ -70,6 +70,8 @@
 
 #define DRM_IOCTL_WAIT_VBLANK32		DRM_IOWR(0x3a, drm_wait_vblank32_t)
 
+#define DRM_IOCTL_MODE_ADDFB232		DRM_IOWR(0xb8, drm_mode_fb_cmd232_t)
+
 typedef struct drm_version_32 {
 	int version_major;	  /**< Major version */
 	int version_minor;	  /**< Minor version */

@@ -1016,6 +1018,63 @@ static int compat_drm_wait_vblank(struct
 	return 0;
 }
 
+typedef struct drm_mode_fb_cmd232 {
+	u32 fb_id;
+	u32 width;
+	u32 height;
+	u32 pixel_format;
+	u32 flags;
+	u32 handles[4];
+	u32 pitches[4];
+	u32 offsets[4];
+	u64 modifier[4];
+} __attribute__((packed)) drm_mode_fb_cmd232_t;
+
+static int compat_drm_mode_addfb2(struct file *file, unsigned int cmd,
+				  unsigned long arg)
+{
+	struct drm_mode_fb_cmd232 __user *argp = (void __user *)arg;
+	struct drm_mode_fb_cmd232 req32;
+	struct drm_mode_fb_cmd2 __user *req64;
+	int i;
+	int err;
+
+	if (copy_from_user(&req32, argp, sizeof(req32)))
+		return -EFAULT;
+
+	req64 = compat_alloc_user_space(sizeof(*req64));
+
+	if (!access_ok(VERIFY_WRITE, req64, sizeof(*req64))
+	    || __put_user(req32.width, &req64->width)
+	    || __put_user(req32.height, &req64->height)
+	    || __put_user(req32.pixel_format, &req64->pixel_format)
+	    || __put_user(req32.flags, &req64->flags))
+		return -EFAULT;
+
+	for (i = 0; i < 4; i++) {
+		if (__put_user(req32.handles[i], &req64->handles[i]))
+			return -EFAULT;
+		if (__put_user(req32.pitches[i], &req64->pitches[i]))
+			return -EFAULT;
+		if (__put_user(req32.offsets[i], &req64->offsets[i]))
+			return -EFAULT;
+		if (__put_user(req32.modifier[i], &req64->modifier[i]))
+			return -EFAULT;
+	}
+
+	err = drm_ioctl(file, DRM_IOCTL_MODE_ADDFB2, (unsigned long)req64);
+	if (err)
+		return err;
+
+	if (__get_user(req32.fb_id, &req64->fb_id))
+		return -EFAULT;
+
+	if (copy_to_user(argp, &req32, sizeof(req32)))
+		return -EFAULT;
+
+	return 0;
+}
+
 static drm_ioctl_compat_t *drm_compat_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_VERSION32)] = compat_drm_version,
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_UNIQUE32)] = compat_drm_getunique,

@@ -1048,6 +1107,7 @@ static drm_ioctl_compat_t *drm_compat_io
 	[DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw,
 #endif
 	[DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank,
+	[DRM_IOCTL_NR(DRM_IOCTL_MODE_ADDFB232)] = compat_drm_mode_addfb2,
 };
 
 /**

---
 drivers/ata/libata-eh.c |    1 +
 1 file changed, 1 insertion(+)
@@ -1521,6 +1521,7 @@ retry:
 	} else {
 		tf.command = ATA_CMD_READ_LOG_EXT;
 		tf.protocol = ATA_PROT_PIO;
+		dma = false;
 	}
 	tf.lbal = log;
 	tf.lbam = page;

# ls -l mnt
total 4
lrwxrwxrwx. 1 root root 929 Jun 15 16:58 link -> XSLM
---
 fs/xfs/xfs_symlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -104,7 +104,7 @@ xfs_readlink_bmap(
 			cur_chunk += sizeof(struct xfs_dsymlink_hdr);
 		}
 
-		memcpy(link + offset, bp->b_addr, byte_cnt);
+		memcpy(link + offset, cur_chunk, byte_cnt);
 
 		pathlen -= byte_cnt;
 		offset += byte_cnt;

---
 fs/xfs/xfs_attr_inactive.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
@@ -435,8 +435,14 @@ xfs_attr_inactive(
 	 */
 	xfs_trans_ijoin(trans, dp, 0);
 
-	/* invalidate and truncate the attribute fork extents */
-	if (dp->i_d.di_aformat != XFS_DINODE_FMT_LOCAL) {
+	/*
+	 * Invalidate and truncate the attribute fork extents. Make sure the
+	 * fork actually has attributes as otherwise the invalidation has no
+	 * blocks to read and returns an error. In this case, just do the fork
+	 * removal below.
+	 */
+	if (xfs_inode_hasattr(dp) &&
+	    dp->i_d.di_aformat != XFS_DINODE_FMT_LOCAL) {
 		error = xfs_attr3_root_inactive(&trans, dp);
 		if (error)
 			goto out_cancel;

---
 drivers/w1/slaves/w1_therm.c |   62 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 47 insertions(+), 15 deletions(-)
@@ -59,16 +59,32 @@ MODULE_ALIAS("w1-family-" __stringify(W1
 static int w1_strong_pullup = 1;
 module_param_named(strong_pullup, w1_strong_pullup, int, 0);
 
+struct w1_therm_family_data {
+	uint8_t rom[9];
+	atomic_t refcnt;
+};
+
+/* return the address of the refcnt in the family data */
+#define THERM_REFCNT(family_data) \
+	(&((struct w1_therm_family_data*)family_data)->refcnt)
+
 static int w1_therm_add_slave(struct w1_slave *sl)
 {
-	sl->family_data = kzalloc(9, GFP_KERNEL);
+	sl->family_data = kzalloc(sizeof(struct w1_therm_family_data),
+		GFP_KERNEL);
 	if (!sl->family_data)
 		return -ENOMEM;
+	atomic_set(THERM_REFCNT(sl->family_data), 1);
 	return 0;
 }
 
 static void w1_therm_remove_slave(struct w1_slave *sl)
 {
+	int refcnt = atomic_sub_return(1, THERM_REFCNT(sl->family_data));
+	while(refcnt) {
+		msleep(1000);
+		refcnt = atomic_read(THERM_REFCNT(sl->family_data));
+	}
 	kfree(sl->family_data);
 	sl->family_data = NULL;
 }

@@ -194,13 +210,22 @@ static ssize_t w1_slave_show(struct devi
 	struct w1_slave *sl = dev_to_w1_slave(device);
 	struct w1_master *dev = sl->master;
 	u8 rom[9], crc, verdict, external_power;
-	int i, max_trying = 10;
+	int i, ret, max_trying = 10;
 	ssize_t c = PAGE_SIZE;
+	u8 *family_data = sl->family_data;
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto post_unlock;
 
-	i = mutex_lock_interruptible(&dev->bus_mutex);
-	if (i != 0)
-		return i;
+	if(!sl->family_data)
+	{
+		ret = -ENODEV;
+		goto pre_unlock;
+	}
 
+	/* prevent the slave from going away in sleep */
+	atomic_inc(THERM_REFCNT(family_data));
 	memset(rom, 0, sizeof(rom));
 
 	while (max_trying--) {

@@ -230,17 +255,19 @@ static ssize_t w1_slave_show(struct devi
 				mutex_unlock(&dev->bus_mutex);
 
 				sleep_rem = msleep_interruptible(tm);
-				if (sleep_rem != 0)
-					return -EINTR;
+				if (sleep_rem != 0) {
+					ret = -EINTR;
+					goto post_unlock;
+				}
 
-				i = mutex_lock_interruptible(&dev->bus_mutex);
-				if (i != 0)
-					return i;
+				ret = mutex_lock_interruptible(&dev->bus_mutex);
+				if (ret != 0)
+					goto post_unlock;
 			} else if (!w1_strong_pullup) {
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
-					mutex_unlock(&dev->bus_mutex);
-					return -EINTR;
+					ret = -EINTR;
+					goto pre_unlock;
 				}
 			}
 

@@ -269,19 +296,24 @@ static ssize_t w1_slave_show(struct devi
 	c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n",
 			   crc, (verdict) ? "YES" : "NO");
 	if (verdict)
-		memcpy(sl->family_data, rom, sizeof(rom));
+		memcpy(family_data, rom, sizeof(rom));
 	else
 		dev_warn(device, "Read failed CRC check\n");
 
 	for (i = 0; i < 9; ++i)
 		c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ",
-			      ((u8 *)sl->family_data)[i]);
+			      ((u8 *)family_data)[i]);
 
 	c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
 		w1_convert_temp(rom, sl->family->fid));
+	ret = PAGE_SIZE - c;
+
+pre_unlock:
 	mutex_unlock(&dev->bus_mutex);
 
-	return PAGE_SIZE - c;
+post_unlock:
+	atomic_dec(THERM_REFCNT(family_data));
+	return ret;
 }
 
 static int __init w1_therm_init(void)

---
 drivers/char/tpm/tpm_crb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
@@ -267,7 +267,7 @@ static int crb_acpi_add(struct acpi_devi
 
 	memcpy_fromio(&pa, &priv->cca->cmd_pa, 8);
 	pa = le64_to_cpu(pa);
-	priv->cmd = devm_ioremap_nocache(dev, le64_to_cpu(pa),
+	priv->cmd = devm_ioremap_nocache(dev, pa,
 					 ioread32(&priv->cca->cmd_size));
 	if (!priv->cmd) {
 		dev_err(dev, "ioremap of the command buffer failed\n");

@@ -276,7 +276,7 @@ static int crb_acpi_add(struct acpi_devi
 
 	memcpy_fromio(&pa, &priv->cca->rsp_pa, 8);
 	pa = le64_to_cpu(pa);
-	priv->rsp = devm_ioremap_nocache(dev, le64_to_cpu(pa),
+	priv->rsp = devm_ioremap_nocache(dev, pa,
 					 ioread32(&priv->cca->rsp_size));
 	if (!priv->rsp) {
 		dev_err(dev, "ioremap of the response buffer failed\n");

---
 drivers/char/tpm/tpm_ibmvtpm.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
@@ -578,6 +578,9 @@ static int tpm_ibmvtpm_probe(struct vio_
 		goto cleanup;
 	}
 
+	ibmvtpm->dev = dev;
+	ibmvtpm->vdev = vio_dev;
+
 	crq_q = &ibmvtpm->crq_queue;
 	crq_q->crq_addr = (struct ibmvtpm_crq *)get_zeroed_page(GFP_KERNEL);
 	if (!crq_q->crq_addr) {

@@ -622,8 +625,6 @@ static int tpm_ibmvtpm_probe(struct vio_
 
 	crq_q->index = 0;
 
-	ibmvtpm->dev = dev;
-	ibmvtpm->vdev = vio_dev;
 	TPM_VPRIV(chip) = (void *)ibmvtpm;
 
 	spin_lock_init(&ibmvtpm->rtce_lock);

---
 drivers/char/tpm/tpm-chip.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
@@ -129,8 +129,9 @@ struct tpm_chip *tpmm_chip_alloc(struct
 
 	device_initialize(&chip->dev);
 
-	chip->cdev.owner = chip->pdev->driver->owner;
 	cdev_init(&chip->cdev, &tpm_fops);
+	chip->cdev.owner = chip->pdev->driver->owner;
+	chip->cdev.kobj.parent = &chip->dev.kobj;
 
 	return chip;
 }

---
 drivers/char/tpm/tpm_crb.c |    8 ++++++++
 1 file changed, 8 insertions(+)
@@ -233,6 +233,14 @@ static int crb_acpi_add(struct acpi_devi
 		return -ENODEV;
 	}
 
+	/* At least some versions of AMI BIOS have a bug that TPM2 table has
+	 * zero address for the control area and therefore we must fail.
+	*/
+	if (!buf->control_area_pa) {
+		dev_err(dev, "TPM2 ACPI table has a zero address for the control area\n");
+		return -EINVAL;
+	}
+
 	if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
 		dev_err(dev, "TPM2 ACPI table has wrong size");
 		return -EINVAL;

---
 crypto/asymmetric_keys/asymmetric_keys.h |    3 +++
 crypto/asymmetric_keys/asymmetric_type.c |   20 ++++++++++++++------
 crypto/asymmetric_keys/x509_public_key.c |   23 ++++++++++++++++++-----
 3 files changed, 35 insertions(+), 11 deletions(-)
@@ -11,6 +11,9 @@
 
 extern struct asymmetric_key_id *asymmetric_key_hex_to_key_id(const char *id);
 
+extern int __asymmetric_key_hex_to_key_id(const char *id,
+					  struct asymmetric_key_id *match_id,
+					  size_t hexlen);
 static inline
 const struct asymmetric_key_ids *asymmetric_key_ids(const struct key *key)
 {

@@ -104,6 +104,15 @@ static bool asymmetric_match_key_ids(
 	return false;
 }
 
+/* helper function can be called directly with pre-allocated memory */
+inline int __asymmetric_key_hex_to_key_id(const char *id,
+				   struct asymmetric_key_id *match_id,
+				   size_t hexlen)
+{
+	match_id->len = hexlen;
+	return hex2bin(match_id->data, id, hexlen);
+}
+
 /**
  * asymmetric_key_hex_to_key_id - Convert a hex string into a key ID.
  * @id: The ID as a hex string.

@@ -111,21 +120,20 @@ static bool asymmetric_match_key_ids(
 struct asymmetric_key_id *asymmetric_key_hex_to_key_id(const char *id)
 {
 	struct asymmetric_key_id *match_id;
-	size_t hexlen;
+	size_t asciihexlen;
 	int ret;
 
 	if (!*id)
 		return ERR_PTR(-EINVAL);
-	hexlen = strlen(id);
-	if (hexlen & 1)
+	asciihexlen = strlen(id);
+	if (asciihexlen & 1)
 		return ERR_PTR(-EINVAL);
 
-	match_id = kmalloc(sizeof(struct asymmetric_key_id) + hexlen / 2,
+	match_id = kmalloc(sizeof(struct asymmetric_key_id) + asciihexlen / 2,
 			   GFP_KERNEL);
 	if (!match_id)
 		return ERR_PTR(-ENOMEM);
-	match_id->len = hexlen / 2;
-	ret = hex2bin(match_id->data, id, hexlen / 2);
+	ret = __asymmetric_key_hex_to_key_id(id, match_id, asciihexlen / 2);
 	if (ret < 0) {
 		kfree(match_id);
 		return ERR_PTR(-EINVAL);

@@ -28,17 +28,30 @@ static bool use_builtin_keys;
 static struct asymmetric_key_id *ca_keyid;
 
 #ifndef MODULE
+static struct {
+	struct asymmetric_key_id id;
+	unsigned char data[10];
+} cakey;
+
 static int __init ca_keys_setup(char *str)
 {
 	if (!str)		/* default system keyring */
 		return 1;
 
 	if (strncmp(str, "id:", 3) == 0) {
-		struct asymmetric_key_id *p;
-		p = asymmetric_key_hex_to_key_id(str + 3);
-		if (p == ERR_PTR(-EINVAL))
-			pr_err("Unparsable hex string in ca_keys\n");
-		else if (!IS_ERR(p))
+		struct asymmetric_key_id *p = &cakey.id;
+		size_t hexlen = (strlen(str) - 3) / 2;
+		int ret;
+
+		if (hexlen == 0 || hexlen > sizeof(cakey.data)) {
+			pr_err("Missing or invalid ca_keys id\n");
+			return 1;
+		}
+
+		ret = __asymmetric_key_hex_to_key_id(str + 3, p, hexlen);
+		if (ret < 0)
+			pr_err("Unparsable ca_keys id hex string\n");
+		else
 			ca_keyid = p;	/* owner key 'id:xxxxxx' */
 	} else if (strcmp(str, "builtin") == 0) {
 		use_builtin_keys = true;

---
 security/keys/keyring.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
@@ -1181,9 +1181,11 @@ void __key_link_end(struct key *keyring,
 	if (index_key->type == &key_type_keyring)
 		up_write(&keyring_serialise_link_sem);
 
-	if (edit && !edit->dead_leaf) {
-		key_payload_reserve(keyring,
-				    keyring->datalen - KEYQUOTA_LINK_BYTES);
+	if (edit) {
+		if (!edit->dead_leaf) {
+			key_payload_reserve(keyring,
+				keyring->datalen - KEYQUOTA_LINK_BYTES);
+		}
 		assoc_array_cancel_edit(edit);
 	}
 	up_write(&keyring->sem);

---
 Documentation/ABI/testing/ima_policy |   17 ++++++++++++-----
 security/integrity/ima/ima_policy.c  |    2 ++
 2 files changed, 14 insertions(+), 5 deletions(-)
@@ -49,11 +49,22 @@ Description:
 			dont_measure fsmagic=0x01021994
 			dont_appraise fsmagic=0x01021994
 			# RAMFS_MAGIC
-			dont_measure fsmagic=0x858458f6
 			dont_appraise fsmagic=0x858458f6
+			# DEVPTS_SUPER_MAGIC
+			dont_measure fsmagic=0x1cd1
+			dont_appraise fsmagic=0x1cd1
+			# BINFMTFS_MAGIC
+			dont_measure fsmagic=0x42494e4d
+			dont_appraise fsmagic=0x42494e4d
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
 			dont_appraise fsmagic=0x73636673
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+			# CGROUP_SUPER_MAGIC
+			dont_measure fsmagic=0x27e0eb
+			dont_appraise fsmagic=0x27e0eb
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC

@@ -70,10 +81,6 @@ Description:
 		Examples of LSM specific definitions:
 
 		SELinux:
-			# SELINUX_MAGIC
-			dont_measure fsmagic=0xf97cff8c
-			dont_appraise fsmagic=0xf97cff8c
-
 			dont_measure obj_type=var_log_t
 			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t

@@ -79,6 +79,8 @@ static struct ima_rule_entry default_rul
 	{.action = DONT_MEASURE, .fsmagic = BINFMTFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE, .fsmagic = SECURITYFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE, .fsmagic = SELINUX_MAGIC, .flags = IMA_FSMAGIC},
+	{.action = DONT_MEASURE, .fsmagic = CGROUP_SUPER_MAGIC,
+	 .flags = IMA_FSMAGIC},
 	{.action = MEASURE, .func = MMAP_CHECK, .mask = MAY_EXEC,
 	 .flags = IMA_FUNC | IMA_MASK},
 	{.action = MEASURE, .func = BPRM_CHECK, .mask = MAY_EXEC,

---
 security/integrity/ima/ima_policy.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
@@ -340,16 +340,12 @@ void __init ima_init_policy(void)
 	appraise_entries = ima_use_appraise_tcb ?
 			 ARRAY_SIZE(default_appraise_rules) : 0;
 
-	for (i = 0; i < measure_entries + appraise_entries; i++) {
-		if (i < measure_entries)
-			list_add_tail(&default_rules[i].list,
-				      &ima_default_rules);
-		else {
-			int j = i - measure_entries;
+	for (i = 0; i < measure_entries; i++)
+		list_add_tail(&default_rules[i].list, &ima_default_rules);
 
-			list_add_tail(&default_appraise_rules[j].list,
-				      &ima_default_rules);
-		}
+	for (i = 0; i < appraise_entries; i++) {
+		list_add_tail(&default_appraise_rules[i].list,
+			      &ima_default_rules);
 	}
 
 	ima_rules = &ima_default_rules;

---
 Documentation/ABI/testing/ima_policy |    3 +++
 security/integrity/ima/ima_policy.c  |    2 ++
 2 files changed, 5 insertions(+)
@@ -65,6 +65,9 @@ Description:
 			# CGROUP_SUPER_MAGIC
 			dont_measure fsmagic=0x27e0eb
 			dont_appraise fsmagic=0x27e0eb
+			# NSFS_MAGIC
+			dont_measure fsmagic=0x6e736673
+			dont_appraise fsmagic=0x6e736673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC

@@ -81,6 +81,7 @@ static struct ima_rule_entry default_rul
 	{.action = DONT_MEASURE, .fsmagic = SELINUX_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_MEASURE, .fsmagic = CGROUP_SUPER_MAGIC,
 	 .flags = IMA_FSMAGIC},
+	{.action = DONT_MEASURE, .fsmagic = NSFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = MEASURE, .func = MMAP_CHECK, .mask = MAY_EXEC,
 	 .flags = IMA_FUNC | IMA_MASK},
 	{.action = MEASURE, .func = BPRM_CHECK, .mask = MAY_EXEC,

@@ -101,6 +102,7 @@ static struct ima_rule_entry default_app
 	{.action = DONT_APPRAISE, .fsmagic = BINFMTFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_APPRAISE, .fsmagic = SECURITYFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_APPRAISE, .fsmagic = SELINUX_MAGIC, .flags = IMA_FSMAGIC},
+	{.action = DONT_APPRAISE, .fsmagic = NSFS_MAGIC, .flags = IMA_FSMAGIC},
 	{.action = DONT_APPRAISE, .fsmagic = CGROUP_SUPER_MAGIC, .flags = IMA_FSMAGIC},
 #ifndef CONFIG_IMA_APPRAISE_SIGNED_INIT
 	{.action = APPRAISE, .fowner = GLOBAL_ROOT_UID, .flags = IMA_FOWNER},

---
 security/integrity/evm/evm_main.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
@@ -296,6 +296,17 @@ static int evm_protect_xattr(struct dent
 		iint = integrity_iint_find(d_backing_inode(dentry));
 		if (iint && (iint->flags & IMA_NEW_FILE))
 			return 0;
+
+		/* exception for pseudo filesystems */
+		if (dentry->d_inode->i_sb->s_magic == TMPFS_MAGIC
+		    || dentry->d_inode->i_sb->s_magic == SYSFS_MAGIC)
+			return 0;
+
+		integrity_audit_msg(AUDIT_INTEGRITY_METADATA,
+				    dentry->d_inode, dentry->d_name.name,
+				    "update_metadata",
+				    integrity_status_msg[evm_status],
+				    -EPERM, 0);
 	}
 out:
 	if (evm_status != INTEGRITY_PASS)

---
 security/integrity/ima/ima.h              |    2 +-
 security/integrity/ima/ima_fs.c           |    4 ++--
 security/integrity/ima/ima_template_lib.c |    3 ++-
 3 files changed, 5 insertions(+), 4 deletions(-)
@@ -106,7 +106,7 @@ void ima_add_violation(struct file *file
 		       const char *op, const char *cause);
 int ima_init_crypto(void);
 void ima_putc(struct seq_file *m, void *data, int datalen);
-void ima_print_digest(struct seq_file *m, u8 *digest, int size);
+void ima_print_digest(struct seq_file *m, u8 *digest, u32 size);
 struct ima_template_desc *ima_template_desc_current(void);
 int ima_init_template(void);
 

@@ -190,9 +190,9 @@ static const struct file_operations ima_
 	.release = seq_release,
 };
 
-void ima_print_digest(struct seq_file *m, u8 *digest, int size)
+void ima_print_digest(struct seq_file *m, u8 *digest, u32 size)
 {
-	int i;
+	u32 i;
 
 	for (i = 0; i < size; i++)
 		seq_printf(m, "%02x", *(digest + i));

@@ -70,7 +70,8 @@ static void ima_show_template_data_ascii
 					 enum data_formats datafmt,
 					 struct ima_field_data *field_data)
 {
-	u8 *buf_ptr = field_data->data, buflen = field_data->len;
+	u8 *buf_ptr = field_data->data;
+	u32 buflen = field_data->len;
 
 	switch (datafmt) {
 	case DATA_FMT_DIGEST_WITH_ALGO:

---
 Documentation/ABI/testing/ima_policy |    3 ++-
 security/integrity/ima/ima_policy.c  |   27 +++++++++++++++++++++++----
 2 files changed, 25 insertions(+), 5 deletions(-)
@@ -20,7 +20,7 @@ Description:
 		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
-				 [fowner]]
+				[euid=] [fowner=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [permit_directio]

@@ -31,6 +31,7 @@ Description:
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
+			euid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
 		option:	appraise_type:= [imasig]

@@ -27,6 +27,7 @@
 #define IMA_UID		0x0008
 #define IMA_FOWNER	0x0010
 #define IMA_FSUUID	0x0020
+#define IMA_EUID	0x0080
 
 #define UNKNOWN		0
 #define MEASURE		0x0001	/* same as IMA_MEASURE */

@@ -194,6 +195,16 @@ static bool ima_match_rules(struct ima_r
 		return false;
 	if ((rule->flags & IMA_UID) && !uid_eq(rule->uid, cred->uid))
 		return false;
+	if (rule->flags & IMA_EUID) {
+		if (has_capability_noaudit(current, CAP_SETUID)) {
+			if (!uid_eq(rule->uid, cred->euid)
+			    && !uid_eq(rule->uid, cred->suid)
+			    && !uid_eq(rule->uid, cred->uid))
+				return false;
+		} else if (!uid_eq(rule->uid, cred->euid))
+			return false;
+	}
+
 	if ((rule->flags & IMA_FOWNER) && !uid_eq(rule->fowner, inode->i_uid))
 		return false;
 	for (i = 0; i < MAX_LSM_RULES; i++) {

@@ -373,7 +384,8 @@ enum {
 	Opt_audit,
 	Opt_obj_user, Opt_obj_role, Opt_obj_type,
 	Opt_subj_user, Opt_subj_role, Opt_subj_type,
-	Opt_func, Opt_mask, Opt_fsmagic, Opt_uid, Opt_fowner,
+	Opt_func, Opt_mask, Opt_fsmagic,
+	Opt_uid, Opt_euid, Opt_fowner,
 	Opt_appraise_type, Opt_fsuuid, Opt_permit_directio
 };
 

@@ -394,6 +406,7 @@ static match_table_t policy_tokens = {
 	{Opt_fsmagic, "fsmagic=%s"},
 	{Opt_fsuuid, "fsuuid=%s"},
 	{Opt_uid, "uid=%s"},
+	{Opt_euid, "euid=%s"},
 	{Opt_fowner, "fowner=%s"},
 	{Opt_appraise_type, "appraise_type=%s"},
 	{Opt_permit_directio, "permit_directio"},

@@ -566,6 +579,9 @@ static int ima_parse_rule(char *rule, st
 			break;
 		case Opt_uid:
 			ima_log_string(ab, "uid", args[0].from);
+		case Opt_euid:
+			if (token == Opt_euid)
+				ima_log_string(ab, "euid", args[0].from);
 
 			if (uid_valid(entry->uid)) {
 				result = -EINVAL;

@@ -574,11 +590,14 @@ static int ima_parse_rule(char *rule, st
 
 			result = kstrtoul(args[0].from, 10, &lnum);
 			if (!result) {
-				entry->uid = make_kuid(current_user_ns(), (uid_t)lnum);
-				if (!uid_valid(entry->uid) || (((uid_t)lnum) != lnum))
+				entry->uid = make_kuid(current_user_ns(),
+						       (uid_t) lnum);
+				if (!uid_valid(entry->uid) ||
+				    (uid_t)lnum != lnum)
 					result = -EINVAL;
 				else
-					entry->flags |= IMA_UID;
+					entry->flags |= (token == Opt_uid)
+					    ? IMA_UID : IMA_EUID;
 			}
 			break;
 		case Opt_fowner:

---
 Documentation/ABI/testing/ima_policy |    3 ++-
 security/integrity/ima/ima_policy.c  |   20 +++++++++++++++-----
 2 files changed, 17 insertions(+), 6 deletions(-)
@@ -27,7 +27,8 @@ Description:
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
-			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value

@@ -27,6 +27,7 @@
 #define IMA_UID		0x0008
 #define IMA_FOWNER	0x0010
 #define IMA_FSUUID	0x0020
+#define IMA_INMASK	0x0040
 #define IMA_EUID	0x0080
 
 #define UNKNOWN		0

@@ -187,6 +188,9 @@ static bool ima_match_rules(struct ima_r
 	if ((rule->flags & IMA_MASK) &&
 	    (rule->mask != mask && func != POST_SETATTR))
 		return false;
+	if ((rule->flags & IMA_INMASK) &&
+	    (!(rule->mask & mask) && func != POST_SETATTR))
+		return false;
 	if ((rule->flags & IMA_FSMAGIC)
 	    && rule->fsmagic != inode->i_sb->s_magic)
 		return false;

@@ -448,6 +452,7 @@ static void ima_log_string(struct audit_
 static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 {
 	struct audit_buffer *ab;
+	char *from;
 	char *p;
 	int result = 0;
 

@@ -538,18 +543,23 @@ static int ima_parse_rule(char *rule, st
 			if (entry->mask)
 				result = -EINVAL;
 
-			if ((strcmp(args[0].from, "MAY_EXEC")) == 0)
+			from = args[0].from;
+			if (*from == '^')
+				from++;
+
+			if ((strcmp(from, "MAY_EXEC")) == 0)
 				entry->mask = MAY_EXEC;
-			else if (strcmp(args[0].from, "MAY_WRITE") == 0)
+			else if (strcmp(from, "MAY_WRITE") == 0)
 				entry->mask = MAY_WRITE;
-			else if (strcmp(args[0].from, "MAY_READ") == 0)
+			else if (strcmp(from, "MAY_READ") == 0)
 				entry->mask = MAY_READ;
-			else if (strcmp(args[0].from, "MAY_APPEND") == 0)
+			else if (strcmp(from, "MAY_APPEND") == 0)
 				entry->mask = MAY_APPEND;
 			else
 				result = -EINVAL;
 			if (!result)
-				entry->flags |= IMA_MASK;
+				entry->flags |= (*args[0].from == '^')
+				     ? IMA_INMASK : IMA_MASK;
 			break;
 		case Opt_fsmagic:
 			ima_log_string(ab, "fsmagic", args[0].from);

---
 Documentation/kernel-parameters.txt |   10 ++++-
 security/integrity/ima/ima_policy.c |   65 +++++++++++++++++++++++++++++++-----
 2 files changed, 65 insertions(+), 10 deletions(-)
@@ -1398,7 +1398,15 @@ bytes respectively. Such letter suffixes
 			The list of supported hash algorithms is defined
 			in crypto/hash_info.h.
 
-	ima_tcb		[IMA]
+	ima_policy=	[IMA]
+			The builtin measurement policy to load during IMA
+			setup.  Specyfing "tcb" as the value, measures all
+			programs exec'd, files mmap'd for exec, and all files
+			opened with the read mode bit set by either the
+			effective uid (euid=0) or uid=0.
+			Format: "tcb"
+
+	ima_tcb		[IMA] Deprecated.  Use ima_policy= instead.
 			Load a policy which meets the needs of the Trusted
 			Computing Base.  This means IMA will measure all
 			programs exec'd, files mmap'd for exec, and all files

 # echo '>' > /sys/kernel/debug/events/ext4/ext4_truncate_exit/filter
---
 kernel/trace/trace_events_filter.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
@@ -1385,7 +1385,9 @@ static int check_preds(struct filter_par
 		if (elt->op != OP_NOT)
 			cnt--;
 		n_normal_preds++;
-		WARN_ON_ONCE(cnt < 0);
+		/* all ops should have operands */
+		if (cnt < 0)
+			break;
 	}
 
 	if (cnt != 1 || !n_normal_preds || n_logical_preds >= n_normal_preds) {

 # echo '>' > /sys/kernel/debug/events/ext4/ext4_truncate_exit/filter
	ps->infix.cnt--;
	return ps->infix.string[ps->infix.tail++];
---
 kernel/trace/trace_events_filter.c |    6 ++++++
 1 file changed, 6 insertions(+)
@@ -1056,6 +1056,9 @@ static void parse_init(struct filter_par
 
 static char infix_next(struct filter_parse_state *ps)
 {
+	if (!ps->infix.cnt)
+		return 0;
+
 	ps->infix.cnt--;
 
 	return ps->infix.string[ps->infix.tail++];

@@ -1071,6 +1074,9 @@ static char infix_peek(struct filter_par
 
 static void infix_advance(struct filter_parse_state *ps)
 {
+	if (!ps->infix.cnt)
+		return;
+
 	ps->infix.cnt--;
 	ps->infix.tail++;
 }

---
 kernel/trace/trace.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
@@ -1312,7 +1312,7 @@ void trace_event_init(void);
 void trace_event_enum_update(struct trace_enum_map **map, int len);
 #else
 static inline void __init trace_event_init(void) { }
-static inlin void trace_event_enum_update(struct trace_enum_map **map, int len) { }
+static inline void trace_event_enum_update(struct trace_enum_map **map, int len) { }
 #endif
 
 extern struct trace_iterator *tracepoint_print_iter;

---
 kernel/trace/trace.h        |    1 +
 kernel/trace/trace_branch.c |   17 ++++++++++-------
 2 files changed, 11 insertions(+), 7 deletions(-)
@@ -444,6 +444,7 @@ enum {
 
 	TRACE_CONTROL_BIT,
 
+	TRACE_BRANCH_BIT,
 /*
  * Abuse of the trace_recursion.
  * As we need a way to maintain state if we are tracing the function

@@ -36,9 +36,12 @@ probe_likely_condition(struct ftrace_bra
 	struct trace_branch *entry;
 	struct ring_buffer *buffer;
 	unsigned long flags;
-	int cpu, pc;
+	int pc;
 	const char *p;
 
+	if (current->trace_recursion & TRACE_BRANCH_BIT)
+		return;
+
 	/*
 	 * I would love to save just the ftrace_likely_data pointer, but
 	 * this code can also be used by modules. Ugly things can happen

@@ -49,10 +52,10 @@ probe_likely_condition(struct ftrace_bra
 	if (unlikely(!tr))
 		return;
 
-	local_irq_save(flags);
-	cpu = raw_smp_processor_id();
-	data = per_cpu_ptr(tr->trace_buffer.data, cpu);
-	if (atomic_inc_return(&data->disabled) != 1)
+	raw_local_irq_save(flags);
+	current->trace_recursion |= TRACE_BRANCH_BIT;
+	data = this_cpu_ptr(tr->trace_buffer.data);
+	if (atomic_read(&data->disabled))
 		goto out;
 
 	pc = preempt_count();

@@ -81,8 +84,8 @@ probe_likely_condition(struct ftrace_bra
 		__buffer_unlock_commit(buffer, event);
 
  out:
-	atomic_dec(&data->disabled);
-	local_irq_restore(flags);
+	current->trace_recursion &= ~TRACE_BRANCH_BIT;
+	raw_local_irq_restore(flags);
 }
 
 static inline

  $ insmod trace-events-sample.ko
  $ echo 1 > /sys/kernel/debug/tracing/events/sample-trace/foo_bar/enable
  $ cat /sys/kernel/debug/tracing/trace
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 The array length is not right, should be {0x1}.
                 The array length is not right, should be {0x1,0x2}.
---
 samples/trace_events/trace-events-sample.h |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
@@ -168,7 +168,10 @@
  *
  *      For __dynamic_array(int, foo, bar) use __get_dynamic_array(foo)
  *            Use __get_dynamic_array_len(foo) to get the length of the array
- *            saved.
+ *            saved. Note, __get_dynamic_array_len() returns the total allocated
+ *            length of the dynamic array; __print_array() expects the second
+ *            parameter to be the number of elements. To get that, the array length
+ *            needs to be divided by the element size.
  *
  *      For __string(foo, bar) use __get_str(foo)
  *

@@ -288,7 +291,7 @@ TRACE_EVENT(foo_bar,
  *    This prints out the array that is defined by __array in a nice format.
  */
 		  __print_array(__get_dynamic_array(list),
-				__get_dynamic_array_len(list),
+				__get_dynamic_array_len(list) / sizeof(int),
 				sizeof(int)),
 		  __get_str(str), __get_bitmask(cpus))
 );

---
 drivers/dma/mv_xor.c |   74 ++++++++++++++++++++++++++++++++-------------------
 drivers/dma/mv_xor.h |    1 
 2 files changed, 48 insertions(+), 27 deletions(-)
@@ -273,7 +273,8 @@ static void mv_xor_slot_cleanup(struct m
 	dma_cookie_t cookie = 0;
 	int busy = mv_chan_is_busy(mv_chan);
 	u32 current_desc = mv_chan_get_current_desc(mv_chan);
-	int seen_current = 0;
+	int current_cleaned = 0;
+	struct mv_xor_desc *hw_desc;
 
 	dev_dbg(mv_chan_to_devp(mv_chan), "%s %d\n", __func__, __LINE__);
 	dev_dbg(mv_chan_to_devp(mv_chan), "current_desc %x\n", current_desc);

@@ -285,38 +286,57 @@ static void mv_xor_slot_cleanup(struct m
 
 	list_for_each_entry_safe(iter, _iter, &mv_chan->chain,
 					chain_node) {
-		prefetch(_iter);
-		prefetch(&_iter->async_tx);
 
-		/* do not advance past the current descriptor loaded into the
-		 * hardware channel, subsequent descriptors are either in
-		 * process or have not been submitted
-		 */
-		if (seen_current)
-			break;
-
-		/* stop the search if we reach the current descriptor and the
-		 * channel is busy
-		 */
-		if (iter->async_tx.phys == current_desc) {
-			seen_current = 1;
-			if (busy)
+		/* clean finished descriptors */
+		hw_desc = iter->hw_desc;
+		if (hw_desc->status & XOR_DESC_SUCCESS) {
+			cookie = mv_xor_run_tx_complete_actions(iter, mv_chan,
+								cookie);
+
+			/* done processing desc, clean slot */
+			mv_xor_clean_slot(iter, mv_chan);
+
+			/* break if we did cleaned the current */
+			if (iter->async_tx.phys == current_desc) {
+				current_cleaned = 1;
 				break;
+			}
+		} else {
+			if (iter->async_tx.phys == current_desc) {
+				current_cleaned = 0;
+				break;
+			}
 		}
-
-		cookie = mv_xor_run_tx_complete_actions(iter, mv_chan, cookie);
-
-		if (mv_xor_clean_slot(iter, mv_chan))
-			break;
 	}
 
 	if ((busy == 0) && !list_empty(&mv_chan->chain)) {
-		struct mv_xor_desc_slot *chain_head;
-		chain_head = list_entry(mv_chan->chain.next,
-					struct mv_xor_desc_slot,
-					chain_node);
-
-		mv_xor_start_new_chain(mv_chan, chain_head);
+		if (current_cleaned) {
+			/*
+			 * current descriptor cleaned and removed, run
+			 * from list head
+			 */
+			iter = list_entry(mv_chan->chain.next,
+					  struct mv_xor_desc_slot,
+					  chain_node);
+			mv_xor_start_new_chain(mv_chan, iter);
+		} else {
+			if (!list_is_last(&iter->chain_node, &mv_chan->chain)) {
+				/*
+				 * descriptors are still waiting after
+				 * current, trigger them
+				 */
+				iter = list_entry(iter->chain_node.next,
+						  struct mv_xor_desc_slot,
+						  chain_node);
+				mv_xor_start_new_chain(mv_chan, iter);
+			} else {
+				/*
+				 * some descriptors are still waiting
+				 * to be cleaned
+				 */
+				tasklet_schedule(&mv_chan->irq_tasklet);
+			}
+		}
 	}
 
 	if (cookie > 0)

@@ -31,6 +31,7 @@
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
 #define XOR_DESCRIPTOR_SWAP		BIT(14)
+#define XOR_DESC_SUCCESS		0x40000000
 
 #define XOR_DESC_DMA_OWNED		BIT(31)
 #define XOR_DESC_EOD_INT_EN		BIT(31)

---
 drivers/md/md.c |    3 +++
 1 file changed, 3 insertions(+)
@@ -5159,6 +5159,7 @@ int md_run(struct mddev *mddev)
 		mddev_detach(mddev);
 		if (mddev->private)
 			pers->free(mddev, mddev->private);
+		mddev->private = NULL;
 		module_put(pers->owner);
 		bitmap_destroy(mddev);
 		return err;

@@ -5294,6 +5295,7 @@ static void md_clean(struct mddev *mddev
 	mddev->changed = 0;
 	mddev->degraded = 0;
 	mddev->safemode = 0;
+	mddev->private = NULL;
 	mddev->merge_check_needed = 0;
 	mddev->bitmap_info.offset = 0;
 	mddev->bitmap_info.default_offset = 0;

@@ -5366,6 +5368,7 @@ static void __md_stop(struct mddev *mdde
 	mddev->pers = NULL;
 	spin_unlock(&mddev->lock);
 	pers->free(mddev, mddev->private);
+	mddev->private = NULL;
 	if (pers->sync_request && mddev->to_remove == NULL)
 		mddev->to_remove = &md_redundancy_group;
 	module_put(pers->owner);

---
 drivers/md/md.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
@@ -4005,8 +4005,10 @@ new_dev_store(struct mddev *mddev, const
 	else
 		rdev = md_import_device(dev, -1, -1);
 
-	if (IS_ERR(rdev))
+	if (IS_ERR(rdev)) {
+		mddev_unlock(mddev);
 		return PTR_ERR(rdev);
+	}
 	err = bind_rdev_to_array(rdev, mddev);
  out:
 	if (err)

---
 drivers/md/bitmap.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
@@ -494,7 +494,7 @@ static int bitmap_new_disk_sb(struct bit
 	bitmap_super_t *sb;
 	unsigned long chunksize, daemon_sleep, write_behind;
 
-	bitmap->storage.sb_page = alloc_page(GFP_KERNEL);
+	bitmap->storage.sb_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
 	if (bitmap->storage.sb_page == NULL)
 		return -ENOMEM;
 	bitmap->storage.sb_page->index = 0;

@@ -541,6 +541,7 @@ static int bitmap_new_disk_sb(struct bit
 	sb->state = cpu_to_le32(bitmap->flags);
 	bitmap->events_cleared = bitmap->mddev->events;
 	sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
+	bitmap->mddev->bitmap_info.nodes = 0;
 
 	kunmap_atomic(sb);
 

@@ -611,8 +612,16 @@ re_read:
 	daemon_sleep = le32_to_cpu(sb->daemon_sleep) * HZ;
 	write_behind = le32_to_cpu(sb->write_behind);
 	sectors_reserved = le32_to_cpu(sb->sectors_reserved);
-	nodes = le32_to_cpu(sb->nodes);
-	strlcpy(bitmap->mddev->bitmap_info.cluster_name, sb->cluster_name, 64);
+	/* XXX: This is a hack to ensure that we don't use clustering
+	 *  in case:
+	 *	- dm-raid is in use and
+	 *	- the nodes written in bitmap_sb is erroneous.
+	 */
+	if (!bitmap->mddev->sync_super) {
+		nodes = le32_to_cpu(sb->nodes);
+		strlcpy(bitmap->mddev->bitmap_info.cluster_name,
+				sb->cluster_name, 64);
+	}
 
 	/* verify that the bitmap-specific fields are valid */
 	if (sb->magic != cpu_to_le32(BITMAP_MAGIC))

---
 drivers/hwmon/mcp3021.c |   14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)
@@ -31,14 +31,11 @@
 /* output format */
 #define MCP3021_SAR_SHIFT	2
 #define MCP3021_SAR_MASK	0x3ff
-
 #define MCP3021_OUTPUT_RES	10	/* 10-bit resolution */
-#define MCP3021_OUTPUT_SCALE	4
 
 #define MCP3221_SAR_SHIFT	0
 #define MCP3221_SAR_MASK	0xfff
 #define MCP3221_OUTPUT_RES	12	/* 12-bit resolution */
-#define MCP3221_OUTPUT_SCALE	1
 
 enum chips {
 	mcp3021,

@@ -54,7 +51,6 @@ struct mcp3021_data {
 	u16 sar_shift;
 	u16 sar_mask;
 	u8 output_res;
-	u8 output_scale;
 };
 
 static int mcp3021_read16(struct i2c_client *client)

@@ -84,13 +80,7 @@ static int mcp3021_read16(struct i2c_cli
 
 static inline u16 volts_from_reg(struct mcp3021_data *data, u16 val)
 {
-	if (val == 0)
-		return 0;
-
-	val = val * data->output_scale - data->output_scale / 2;
-
-	return val * DIV_ROUND_CLOSEST(data->vdd,
-			(1 << data->output_res) * data->output_scale);
+	return DIV_ROUND_CLOSEST(data->vdd * val, 1 << data->output_res);
 }
 
 static ssize_t show_in_input(struct device *dev, struct device_attribute *attr,

@@ -132,14 +122,12 @@ static int mcp3021_probe(struct i2c_clie
 		data->sar_shift = MCP3021_SAR_SHIFT;
 		data->sar_mask = MCP3021_SAR_MASK;
 		data->output_res = MCP3021_OUTPUT_RES;
-		data->output_scale = MCP3021_OUTPUT_SCALE;
 		break;
 
 	case mcp3221:
 		data->sar_shift = MCP3221_SAR_SHIFT;
 		data->sar_mask = MCP3221_SAR_MASK;
 		data->output_res = MCP3221_OUTPUT_RES;
-		data->output_scale = MCP3221_OUTPUT_SCALE;
 		break;
 	}
 
