Skip to contentSkip to conversation

ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

PATCH New akpm at linux-foundation.org 3 participants 3 messages Aug 26, 2015 – Sep 2, 2015 OCFS2

lore
Share & tools
lore
#0 lore raw

PATCH 9/28 ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

From: Xue jiufei <[email protected]>
Subject: ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

I found that jbd2_journal_restart() is called in some places without keeping things consistently before. However, jbd2_journal_restart() may commit the handle's transaction and restart another one. If the first transaction is committed successfully while another not, it may cause filesystem inconsistency or read only. This is an effort to fix this kind of problems.

This patch (of 3):

The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
-> ocfs2_start_trans
-> ocfs2_remove_extent

     -> ocfs2_truncate_rec
       -> ocfs2_extend_rotate_transaction
         -> jbd2_journal_restart if jbd2_journal_extend fail
       -> ocfs2_rotate_tree_left
         -> ocfs2_remove_rightmost_path
             -> ocfs2_extend_rotate_transaction
               -> ocfs2_unlink_subtree
                -> ocfs2_update_edge_lengths
                  -> ocfs2_extend_trans
                    -> jbd2_journal_restart if jbd2_journal_extend fail

-> ocfs2_et_update_clusters
-> ocfs2_commit_trans

jbd2_journal_restart() may be called and it may happened that the buffers dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in ocfs2_et_update_clusters() are not, the total clusters on extent tree and i_clusters in ocfs2_dinode is inconsistency. So the clusters got from ocfs2_dinode is incorrect, and it also cause read-only problem when call ocfs2_commit_truncate() with the error message: "Inode %llu has empty extent block at %llu".

We should extend enough credits for function ocfs2_remove_rightmost_path and ocfs2_update_edge_lengths to avoid this inconsistency.

---

 fs/ocfs2/alloc.c |   82 +++++++++++++++++++++++++++++----------------
 1 file changed, 54 insertions(+), 28 deletions(-)
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +54 -28
diff -puN fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et fs/ocfs2/alloc.c
@@ -2526,21 +2526,6 @@ static int ocfs2_update_edge_lengths(han
 	struct ocfs2_extent_block *eb;
 	u32 range;
 
-	/*
-	 * In normal tree rotation process, we will never touch the
-	 * tree branch above subtree_index and ocfs2_extend_rotate_transaction
-	 * doesn't reserve the credits for them either.
-	 *
-	 * But we do have a special case here which will update the rightmost
-	 * records for all the bh in the path.
-	 * So we have to allocate extra credits and access them.
-	 */
-	ret = ocfs2_extend_trans(handle, subtree_index);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
-
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
 		mlog_errno(ret);
@@ -2967,7 +2952,7 @@ static int __ocfs2_rotate_tree_left(hand
 		     right_path->p_node[subtree_root].bh->b_blocknr,
 		     right_path->p_tree_depth);
 
-		ret = ocfs2_extend_rotate_transaction(handle, subtree_root,
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
 						      orig_credits, left_path);
 		if (ret) {
 			mlog_errno(ret);
@@ -3040,21 +3025,9 @@ static int ocfs2_remove_rightmost_path(h
 	struct ocfs2_extent_block *eb;
 	struct ocfs2_extent_list *el;
 
-
 	ret = ocfs2_et_sanity_check(et);
 	if (ret)
 		goto out;
-	/*
-	 * There's two ways we handle this depending on
-	 * whether path is the only existing one.
-	 */
-	ret = ocfs2_extend_rotate_transaction(handle, 0,
-					      handle->h_buffer_credits,
-					      path);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
 
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
@@ -3628,6 +3601,14 @@ static int ocfs2_merge_rec_left(struct o
 		 */
 		if (le16_to_cpu(right_rec->e_leaf_clusters) == 0 &&
 		    le16_to_cpu(el->l_next_free_rec) == 1) {
+			/* extend credit for ocfs2_remove_rightmost_path */
+			ret = ocfs2_extend_rotate_transaction(handle, 0,
+					handle->h_buffer_credits,
+					right_path);
+			if (ret) {
+				mlog_errno(ret);
+				goto out;
+			}
 
 			ret = ocfs2_remove_rightmost_path(handle, et,
 							  right_path,
@@ -3666,6 +3647,14 @@ static int ocfs2_try_to_merge_extent(han
 	BUG_ON(ctxt->c_contig_type == CONTIG_NONE);
 
 	if (ctxt->c_split_covers_rec && ctxt->c_has_empty_extent) {
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+				handle->h_buffer_credits,
+				path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
 		/*
 		 * The merge code will need to create an empty
 		 * extent to take the place of the newly
@@ -3714,6 +3703,15 @@ static int ocfs2_try_to_merge_extent(han
 		 */
 		BUG_ON(!ocfs2_is_empty_extent(&el->l_recs[0]));
 
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+					handle->h_buffer_credits,
+					path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		/* The merge left us with an empty extent, remove it. */
 		ret = ocfs2_rotate_tree_left(handle, et, path, dealloc);
 		if (ret) {
@@ -3735,6 +3733,15 @@ static int ocfs2_try_to_merge_extent(han
 			goto out;
 		}
 
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+				handle->h_buffer_credits,
+				path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		ret = ocfs2_rotate_tree_left(handle, et, path, dealloc);
 		/*
 		 * Error from this last rotate is not critical, so
@@ -3770,6 +3777,16 @@ static int ocfs2_try_to_merge_extent(han
 		}
 
 		if (ctxt->c_split_covers_rec) {
+			/* extend credit for ocfs2_remove_rightmost_path */
+			ret = ocfs2_extend_rotate_transaction(handle, 0,
+					handle->h_buffer_credits,
+					path);
+			if (ret) {
+				mlog_errno(ret);
+				ret = 0;
+				goto out;
+			}
+
 			/*
 			 * The merge may have left an empty extent in
 			 * our leaf. Try to rotate it away.
@@ -5337,6 +5354,15 @@ static int ocfs2_truncate_rec(handle_t *
 	struct ocfs2_extent_block *eb;
 
 	if (ocfs2_is_empty_extent(&el->l_recs[0]) && index > 0) {
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+				handle->h_buffer_credits,
+				path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		ret = ocfs2_rotate_tree_left(handle, et, path, dealloc);
 		if (ret) {
 			mlog_errno(ret);

_

#1 lore raw

PATCH 9/28 ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

Quoted 76 lines · Andrew Morton

From: Xue jiufei <[email protected]>
Subject: ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

I found that jbd2_journal_restart() is called in some places without keeping things consistently before. However, jbd2_journal_restart() may commit the handle's transaction and restart another one. If the first transaction is committed successfully while another not, it may cause filesystem inconsistency or read only. This is an effort to fix this kind of problems.

This patch (of 3):

The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
-> ocfs2_start_trans
-> ocfs2_remove_extent

     -> ocfs2_truncate_rec
       -> ocfs2_extend_rotate_transaction
         -> jbd2_journal_restart if jbd2_journal_extend fail
       -> ocfs2_rotate_tree_left
         -> ocfs2_remove_rightmost_path
             -> ocfs2_extend_rotate_transaction
               -> ocfs2_unlink_subtree
                -> ocfs2_update_edge_lengths
                  -> ocfs2_extend_trans
                    -> jbd2_journal_restart if jbd2_journal_extend fail

-> ocfs2_et_update_clusters
-> ocfs2_commit_trans

jbd2_journal_restart() may be called and it may happened that the buffers dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in ocfs2_et_update_clusters() are not, the total clusters on extent tree and i_clusters in ocfs2_dinode is inconsistency. So the clusters got from ocfs2_dinode is incorrect, and it also cause read-only problem when call ocfs2_commit_truncate() with the error message: "Inode %llu has empty extent block at %llu".

We should extend enough credits for function ocfs2_remove_rightmost_path and ocfs2_update_edge_lengths to avoid this inconsistency.

---

 fs/ocfs2/alloc.c |   82 +++++++++++++++++++++++++++++----------------
 1 file changed, 54 insertions(+), 28 deletions(-)

diff -puN fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et fs/ocfs2/alloc.c

fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +0 -15
@@ -2526,21 +2526,6 @@ static int ocfs2_update_edge_lengths(han
 	struct ocfs2_extent_block *eb;
 	u32 range;
 
-	/*
-	 * In normal tree rotation process, we will never touch the
-	 * tree branch above subtree_index and ocfs2_extend_rotate_transaction
-	 * doesn't reserve the credits for them either.
-	 *
-	 * But we do have a special case here which will update the rightmost
-	 * records for all the bh in the path.
-	 * So we have to allocate extra credits and access them.
-	 */
-	ret = ocfs2_extend_trans(handle, subtree_index);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
-
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
 		mlog_errno(ret);

fs/ocfs2/alloc.c static int __ocfs2_rotate_tree_left(hand · line 2955

Quoted 5 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +1 -1
@@ -2967,7 +2952,7 @@ static int __ocfs2_rotate_tree_left(hand
 		     right_path->p_node[subtree_root].bh->b_blocknr,
 		     right_path->p_tree_depth);
 
-		ret = ocfs2_extend_rotate_transaction(handle, subtree_root,
+		ret = ocfs2_extend_rotate_transaction(handle, 0,

I don't understand why you changed the subtree depth parameter here to zero.

Also, I don't understand why it's zero in all the calls below either. Is there something wrong with the way the math in ocfs2_extend_rotate_transaction() is working out?

Quoted 61 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +18 -12
 						      orig_credits, left_path);
 		if (ret) {
 			mlog_errno(ret);
@@ -3040,21 +3025,9 @@ static int ocfs2_remove_rightmost_path(h
 	struct ocfs2_extent_block *eb;
 	struct ocfs2_extent_list *el;
 
-
 	ret = ocfs2_et_sanity_check(et);
 	if (ret)
 		goto out;
-	/*
-	 * There's two ways we handle this depending on
-	 * whether path is the only existing one.
-	 */
-	ret = ocfs2_extend_rotate_transaction(handle, 0,
-					      handle->h_buffer_credits,
-					      path);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
 
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
@@ -3628,6 +3601,14 @@ static int ocfs2_merge_rec_left(struct o
 		 */
 		if (le16_to_cpu(right_rec->e_leaf_clusters) == 0 &&
 		    le16_to_cpu(el->l_next_free_rec) == 1) {
+			/* extend credit for ocfs2_remove_rightmost_path */
+			ret = ocfs2_extend_rotate_transaction(handle, 0,
+					handle->h_buffer_credits,
+					right_path);
+			if (ret) {
+				mlog_errno(ret);
+				goto out;
+			}
 
 			ret = ocfs2_remove_rightmost_path(handle, et,
 							  right_path,
@@ -3666,6 +3647,14 @@ static int ocfs2_try_to_merge_extent(han
 	BUG_ON(ctxt->c_contig_type == CONTIG_NONE);
 
 	if (ctxt->c_split_covers_rec && ctxt->c_has_empty_extent) {
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+				handle->h_buffer_credits,
+				path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
 		/*
 		 * The merge code will need to create an empty
 		 * extent to take the place of the newly
@@ -3714,6 +3703,15 @@ static int ocfs2_try_to_merge_extent(han
 		 */
 		BUG_ON(!ocfs2_is_empty_extent(&el->l_recs[0]));
 
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,

fs/ocfs2/alloc.c static int ocfs2_try_to_merge_extent(han · line 3717

Quoted 10 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +7 -0
+					handle->h_buffer_credits,
+					path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		/* The merge left us with an empty extent, remove it. */
 		ret = ocfs2_rotate_tree_left(handle, et, path, dealloc);
 		if (ret) {

A few of these were added, where we do the transaction extend before calling ocfs2_rotate_tree_left(), can we move the call into ocfs2_rotate_tree_left() then?

Thanks,

	--Mark

--
Mark Fasheh

#2 lore raw

PATCH 9/28 ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

Hi Mark,
Since Joyce is on holiday, I'll try to answer your doubt.

Quoted 80 lines · Mark Fasheh
Quoted 79 lines · Andrew Morton

From: Xue jiufei <[email protected]>
Subject: ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et

I found that jbd2_journal_restart() is called in some places without keeping things consistently before. However, jbd2_journal_restart() may commit the handle's transaction and restart another one. If the first transaction is committed successfully while another not, it may cause filesystem inconsistency or read only. This is an effort to fix this kind of problems.

This patch (of 3):

The following functions will be called while truncating an extent:
ocfs2_remove_btree_range
-> ocfs2_start_trans
-> ocfs2_remove_extent

     -> ocfs2_truncate_rec
       -> ocfs2_extend_rotate_transaction
         -> jbd2_journal_restart if jbd2_journal_extend fail
       -> ocfs2_rotate_tree_left
         -> ocfs2_remove_rightmost_path
             -> ocfs2_extend_rotate_transaction
               -> ocfs2_unlink_subtree
                -> ocfs2_update_edge_lengths
                  -> ocfs2_extend_trans
                    -> jbd2_journal_restart if jbd2_journal_extend fail

-> ocfs2_et_update_clusters
-> ocfs2_commit_trans

jbd2_journal_restart() may be called and it may happened that the buffers dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in ocfs2_et_update_clusters() are not, the total clusters on extent tree and i_clusters in ocfs2_dinode is inconsistency. So the clusters got from ocfs2_dinode is incorrect, and it also cause read-only problem when call ocfs2_commit_truncate() with the error message: "Inode %llu has empty extent block at %llu".

We should extend enough credits for function ocfs2_remove_rightmost_path and ocfs2_update_edge_lengths to avoid this inconsistency.

---

 fs/ocfs2/alloc.c |   82 +++++++++++++++++++++++++++++----------------
 1 file changed, 54 insertions(+), 28 deletions(-)

diff -puN fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et fs/ocfs2/alloc.c

fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +0 -15
@@ -2526,21 +2526,6 @@ static int ocfs2_update_edge_lengths(han
 	struct ocfs2_extent_block *eb;
 	u32 range;
 
-	/*
-	 * In normal tree rotation process, we will never touch the
-	 * tree branch above subtree_index and ocfs2_extend_rotate_transaction
-	 * doesn't reserve the credits for them either.
-	 *
-	 * But we do have a special case here which will update the rightmost
-	 * records for all the bh in the path.
-	 * So we have to allocate extra credits and access them.
-	 */
-	ret = ocfs2_extend_trans(handle, subtree_index);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
-
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
 		mlog_errno(ret);
@@ -2967,7 +2952,7 @@ static int __ocfs2_rotate_tree_left(hand
 		     right_path->p_node[subtree_root].bh->b_blocknr,
 		     right_path->p_tree_depth);
 
Quoted 8 lines

fs/ocfs2/alloc.c static int __ocfs2_rotate_tree_left(hand · line 2955

Quoted 2 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +1 -1
-		ret = ocfs2_extend_rotate_transaction(handle, subtree_root,
+		ret = ocfs2_extend_rotate_transaction(handle, 0,

I don't understand why you changed the subtree depth parameter here to zero.

Also, I don't understand why it's zero in all the calls below either. Is there something wrong with the way the math in ocfs2_extend_rotate_transaction() is working out?

The credits in ocfs2_extend_rotate_transaction is calculated as (path->p_tree_depth - subtree_depth) * 2 + 1 + op_credits. So changing the subtree_depth parameter to 0 means we get extra credits in ocfs2_truncate_rec ASAP. Then extending credits in ocfs2_update_edge_lengths is no longer needed.
In other words, Joyce wants to resolve the issue by extending enough credits at the very beginning.

Thanks,
Joseph

Quoted 91 lines
Quoted 63 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +18 -12
 						      orig_credits, left_path);
 		if (ret) {
 			mlog_errno(ret);
@@ -3040,21 +3025,9 @@ static int ocfs2_remove_rightmost_path(h
 	struct ocfs2_extent_block *eb;
 	struct ocfs2_extent_list *el;
 
-
 	ret = ocfs2_et_sanity_check(et);
 	if (ret)
 		goto out;
-	/*
-	 * There's two ways we handle this depending on
-	 * whether path is the only existing one.
-	 */
-	ret = ocfs2_extend_rotate_transaction(handle, 0,
-					      handle->h_buffer_credits,
-					      path);
-	if (ret) {
-		mlog_errno(ret);
-		goto out;
-	}
 
 	ret = ocfs2_journal_access_path(et->et_ci, handle, path);
 	if (ret) {
@@ -3628,6 +3601,14 @@ static int ocfs2_merge_rec_left(struct o
 		 */
 		if (le16_to_cpu(right_rec->e_leaf_clusters) == 0 &&
 		    le16_to_cpu(el->l_next_free_rec) == 1) {
+			/* extend credit for ocfs2_remove_rightmost_path */
+			ret = ocfs2_extend_rotate_transaction(handle, 0,
+					handle->h_buffer_credits,
+					right_path);
+			if (ret) {
+				mlog_errno(ret);
+				goto out;
+			}
 
 			ret = ocfs2_remove_rightmost_path(handle, et,
 							  right_path,
@@ -3666,6 +3647,14 @@ static int ocfs2_try_to_merge_extent(han
 	BUG_ON(ctxt->c_contig_type == CONTIG_NONE);
 
 	if (ctxt->c_split_covers_rec && ctxt->c_has_empty_extent) {
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,
+				handle->h_buffer_credits,
+				path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
 		/*
 		 * The merge code will need to create an empty
 		 * extent to take the place of the newly
@@ -3714,6 +3703,15 @@ static int ocfs2_try_to_merge_extent(han
 		 */
 		BUG_ON(!ocfs2_is_empty_extent(&el->l_recs[0]));
 
+		/* extend credit for ocfs2_remove_rightmost_path */
+		ret = ocfs2_extend_rotate_transaction(handle, 0,

fs/ocfs2/alloc.c static int ocfs2_try_to_merge_extent(han · line 3717

Quoted 10 lines
fs/ocfs2/alloc.c renamed from fs/ocfs2/alloc.c~ocfs2-extend-transaction-for-ocfs2_remove_rightmost_path-and-ocfs2_update_edge_lengths-before-to-avoid-inconsistency-between-inode-and-et +7 -0
+					handle->h_buffer_credits,
+					path);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		/* The merge left us with an empty extent, remove it. */
 		ret = ocfs2_rotate_tree_left(handle, et, path, dealloc);
 		if (ret) {

A few of these were added, where we do the transaction extend before calling ocfs2_rotate_tree_left(), can we move the call into ocfs2_rotate_tree_left() then?

Thanks,

	--Mark

--
Mark Fasheh

_______________________________________________
Ocfs2-devel mailing list
Ocfs2-devel at oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-devel

.