nand: sunxi: fix write to USER_DATA reg
PATCH v2 1/1 nand: sunxi: fix write to USER_DATA reg
The USER_DATA register cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when using memcpy_toio on this register. Declare an NFC_USER_DATA() macro to convert the OOB buffer content into a suitable u32 value which can then be programmed with writel().
Also drop the oob_required contidion, since ->oob_pio already contains FFs when oob_required is false.
---
Changes since v1:
- drop the !oob_required conditional path
- replace endianness conversions by a macro relying on byte shifting operations
--- drivers/mtd/nand/sunxi_nand.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-)
drivers/mtd/nand/sunxi_nand.c +8 -17
@@ -138,6 +138,10 @@#define NFC_ECC_MODE GENMASK(15, 12)#define NFC_RANDOM_SEED GENMASK(30, 16) +/* NFC_USER_DATA helper macro */ +#define NFC_USER_DATA (buf) ((buf)[0] | ((buf)[1] << 8) | \ + ((buf)[2] << 16) | ((buf)[3] << 24)) +#define NFC_DEFAULT_TIMEOUT_MS 1000#define NFC_SRAM_SIZE 1024
@@ -632,15 +636,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, offset = layout->eccpos[i * ecc->bytes] -4 + mtd->writesize;/* Fill OOB data in */ -if (oob_required) { - tmp =0xffffffff ; -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , &tmp, -4 ); - }else { -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , - chip->oob_poi + offset - mtd->writesize, -4 ); - } +writel (NFC_USER_DATA (chip->oob_poi + + layout->oobfree[i].offset), + nfc->regs +NFC_REG_USER_DATA_BASE ); chip->cmdfunc (mtd,NAND_CMD_RNDIN , offset,-1 );
@@ -770,14 +768,7 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, offset += ecc->size;/* Fill OOB data in */ -if (oob_required) { - tmp =0xffffffff ; -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , &tmp, -4 ); - }else { -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , oob, -4 ); - } +writel (NFC_USER_DATA (oob), nfc->regs +NFC_REG_USER_DATA_BASE ); tmp =NFC_DATA_TRANS |NFC_DATA_SWAP_METHOD |NFC_ACCESS_DIR | (1 <<30 );
Signature · 1 line
1.9.1
PATCH v2 1/1 nand: sunxi: fix write to USER_DATA reg
Hi Brian,
Quoted 7 lines · On Wed, 2 Sep 2015 09:57:01 +0200 Boris Brezillon…
The
USER_DATAregister cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when usingmemcpy_toioon this register. Declare anNFC_USER_DATA()macro to convert the OOB buffer content into a suitable u32 value which can then be programmed withwritel().Also drop the
oob_requiredcontidion, since ->oob_pio already contains FFs whenoob_requiredis false.
Please ignore this version. I just figured I would need a macro to convert a USER_DATA value into an u8 buffer.
I'll send a v3 adding two macros (NFC_BUF_TO_USER_DATA() and NFC_USER_DATA_TO_BUF()) instead of the NFC_USER_DATA() one.
Best Regards,
Boris
Quoted 62 lines
Signed-off-by Boris Brezillon <[email protected]>---
Changes since v1:
- drop the !oob_required conditional path
- replace endianness conversions by a macro relying on byte shifting operations--- drivers/mtd/nand/sunxi_nand.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-)drivers/mtd/nand/sunxi_nand.c +8
-17@@ -138,6 +138,10 @@#define NFC_ECC_MODE GENMASK(15, 12)#define NFC_RANDOM_SEED GENMASK(30, 16) +/* NFC_USER_DATA helper macro */ +#define NFC_USER_DATA (buf) ((buf)[0] | ((buf)[1] << 8) | \ + ((buf)[2] << 16) | ((buf)[3] << 24)) +#define NFC_DEFAULT_TIMEOUT_MS 1000#define NFC_SRAM_SIZE 1024@@ -632,15 +636,9 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, offset = layout->eccpos[i * ecc->bytes] -4 + mtd->writesize;/* Fill OOB data in */ -if (oob_required) { - tmp =0xffffffff ; -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , &tmp, -4 ); - }else { -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , - chip->oob_poi + offset - mtd->writesize, -4 ); - } +writel (NFC_USER_DATA (chip->oob_poi + + layout->oobfree[i].offset), + nfc->regs +NFC_REG_USER_DATA_BASE ); chip->cmdfunc (mtd,NAND_CMD_RNDIN , offset,-1 );@@ -770,14 +768,7 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, offset += ecc->size;/* Fill OOB data in */ -if (oob_required) { - tmp =0xffffffff ; -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , &tmp, -4 ); - }else { -memcpy_toio (nfc->regs +NFC_REG_USER_DATA_BASE , oob, -4 ); - } +writel (NFC_USER_DATA (oob), nfc->regs +NFC_REG_USER_DATA_BASE ); tmp =NFC_DATA_TRANS |NFC_DATA_SWAP_METHOD |NFC_ACCESS_DIR | (1 <<30 );
Signature · 3 lines
Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH v2 1/1 nand: sunxi: fix write to USER_DATA reg
In reply to Boris BrezillonQuoted 2 lines · Boris Brezillon
Also drop the
oob_requiredcontidion, since ->oob_pio already contains FFs whenoob_requiredis false.
I was pointing out this issues not just because you didn't note it in the commit message, but because the previous behavior actually potentially has user-visible effects. Particularly, because you had the conditions backwards, you were programming 0xff to the spare area, no matter what the user asked for. Normally, this isn't a big issue, since most users aren't storing data in the OOB region. But there may be cases where your driver was subtly broken (marking bad blocks, perhaps?), and this patch is subtly fixing them. Especially since this will get backported to -stable, it'd be nice to have this noted completely.
Did this driver pass mtd_oobtest previously?
Brian