ARM: dts: imx: add "jedec,spi-nor" flash compatible binding
PATCH 1/1 ARM: dts: imx: add "jedec,spi-nor" flash compatible binding
Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification.
Use it for all flashes that are supposed to support READ ID op according to the datasheets.
Signed-off-by Rafa? Mi?ecki <[email protected]>
--- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx50-evk.dts | 2 +- arch/arm/boot/dts/imx53-smd.dts | 2 +- arch/arm/boot/dts/imx6dl-rex-basic.dts | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6q-rex-pro.dts | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6sl-evk.dts | 2 +- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++-- arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++-- 19 files changed, 21 insertions(+), 21 deletions(-)
arch/arm/boot/dts/imx28-evk.dts +1 -1
@@ -57,7 +57,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; };
arch/arm/boot/dts/imx28-m28evk.dts +1 -1
@@ -41,7 +41,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; };
arch/arm/boot/dts/imx50-evk.dts +1 -1
@@ -33,7 +33,7 @@ flash: m25p32 at 1 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p32", "m25p80"; + compatible = "m25p32", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <1>;
arch/arm/boot/dts/imx53-smd.dts +1 -1
@@ -76,7 +76,7 @@ flash: m25p32 at 1 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; + compatible = "st,m25p32", "st,m25p", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>;
arch/arm/boot/dts/imx6dl-rex-basic.dts +1 -1
@@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80 at 0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +1 -1
@@ -109,7 +109,7 @@ status = "okay"; flash: m25p80 at 0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; };
arch/arm/boot/dts/imx6q-gw5400-a.dts +1 -1
@@ -145,7 +145,7 @@ status = "okay"; flash: m25p80 at 0 { - compatible = "sst,w25q256"; + compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; };
arch/arm/boot/dts/imx6q-rex-pro.dts +1 -1
@@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80 at 0 { - compatible = "sst,sst25vf032b"; + compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +1 -1
@@ -109,7 +109,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +1 -1
@@ -141,7 +141,7 @@ flash: m25p80 at 1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; };
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +1 -1
@@ -36,7 +36,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf040b", "m25p80"; + compatible = "sst,sst25vf040b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +1 -1
@@ -157,7 +157,7 @@ status = "okay"; flash: m25p80 at 0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +1 -1
@@ -80,7 +80,7 @@ cs-gpios = <&gpio4 24 0>; flash at 0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +1 -1
@@ -55,7 +55,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +1 -1
@@ -156,7 +156,7 @@ status = "okay"; flash: m25p80 at 0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6qdl-sabresd.dtsi +1 -1
@@ -151,7 +151,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6sl-evk.dts +1 -1
@@ -126,7 +126,7 @@ flash: m25p80 at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; };
arch/arm/boot/dts/imx6sx-sdb-reva.dts +2 -2
@@ -129,7 +129,7 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; };
@@ -137,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; };
arch/arm/boot/dts/imx6sx-sdb.dts +2 -2
@@ -130,7 +130,7 @@ flash0: n25q256a at 0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <0>; };
@@ -138,7 +138,7 @@ flash1: n25q256a at 1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <1>; };
Signature · 1 line
1.8.4.5
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx: add "jedec,spi-nor" flash compatible binding
Quoted 8 lines · Rafa? Mi?ecki
Starting with commit
8947e396a829("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification.Use it for all flashes that are supposed to support READ ID op according to the datasheets.
Signed-off-by Rafa? Mi?ecki <[email protected]>
Applied, thanks.