spi: cadence_qspi: Ensure check for max frequency in place
PATCH v3 3/5 spi: cadence_qspi: Ensure check for max frequency in place
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
Signed-off-by Chin Liang See <[email protected]>
Cc Dinh Nguyen <[email protected]>
Cc Dinh Nguyen <[email protected]>
Cc Marek Vasut <[email protected]>
Cc Stefan Roese <[email protected]>
Cc Vikas Manocha <[email protected]>
Cc Jagannadh Teki <[email protected]>
Cc Pavel Machek <[email protected]>
---
Changes for v3
- Remove the printout
--- drivers/spi/cadence_qspi.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/spi/cadence_qspi.c +3 -0
@@ -127,6 +127,9 @@ static int cadence_spi_set_speed(struct udevice *bus, uint hz)struct cadence_spi_priv *priv =dev_get_priv (bus);int err; +if (hz > plat->max_hz) + hz = plat->max_hz; +/* Disable QSPI */ cadence_qspi_apb_controller_disable (priv->regbase);
--
1.7.7.4
PATCH v3 3/5 spi: cadence_qspi: Ensure check for max frequency in place
Quoted 2 lines · Chin Liang See
Ensure the intended SCLK frequency not exceeding the maximum frequency. If that happen, SCLK will set to maximum frequency.
-> that happens, SCLK will be set to the maximum frequency.
Acked-by Pavel Machek <[email protected]>
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html