malloc_simple: Add support for switching to DRAM heap
PATCH v2 1/1 malloc_simple: Add support for switching to DRAM heap
malloc_simple uses a part of the stack as heap, initially it uses SYS_MALLOC_F_LEN bytes which typically is quite small as the initial stacks sits in SRAM and we do not have that much SRAM to work with.
When DRAM becomes available we may switch the stack from SRAM to DRAM to give use more room. This commit adds support for also switching to a new bigger malloc_simple heap located in the new stack.
Note that this requires spl_init to be called before spl_relocate_stack_gd which in practice means that spl_init must be called from board_init_f.
---
Changes in v2:
-Panic if spl_init is not called before switching the heap from SRAM to
DRAM, spl_init will set up the malloc_limit to SYS_MALLOC_F_LEN bytes, which is the SRAM limit and as such MUST be called before
--- Kconfig | 10 ++++++++++ common/spl/spl.c | 12 ++++++++++++ 2 files changed, 22 insertions(+)
Kconfig +10 -0
@@ -142,6 +142,16 @@ config SPL_STACK_R_ADDR Specify the address in SDRAM for the SPL stack. This will be set up before board_init_r() is called. +config SPL_STACK_R_MALLOC_SIMPLE_LEN + depends on SPL_STACK_R && SPL_MALLOC_SIMPLE + hex "Size of malloc_simple heap after switching to DRAM SPL stack" + default 0x100000 + help + Specify the amount of the stack to use as memory pool for + malloc_simple after switching the stack to DRAM. This may be set + to give board_init_r() a larger heap then the initial heap in + SRAM which is limited to SYS_MALLOC_F_LEN bytes. + config TPL bool depends on SPL && SUPPORT_TPL
common/spl/spl.c +12 -0
@@ -347,6 +347,18 @@ ulong spl_relocate_stack_gd(void)memcpy (new_gd, (void *)gd,sizeof (gd_t)); gd = new_gd; +#ifdef CONFIG_SPL_MALLOC_SIMPLE +if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN ) { +if (!(gd->flags &GD_FLG_SPL_INIT )) +panic ("spl_init must be called before heap realloc" ); + + ptr -=CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN ; + gd->malloc_base = ptr; + gd->malloc_limit =CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN ; + gd->malloc_ptr =0 ; + } +#endif +return ptr;#else return 0 ;
Signature · 1 line
2.4.3
PATCH v2 1/1 malloc_simple: Add support for switching to DRAM heap
Quoted 4 lines · Hans de Goede
malloc_simpleuses a part of the stack as heap, initially it usesSYS_MALLOC_F_LENbytes which typically is quite small as the initial stacks sits in SRAM and we do not have that much SRAM to work with.
Quoted 8 lines
When DRAM becomes available we may switch the stack from SRAM to DRAM to give use more room. This commit adds support for also switching to a new bigger
malloc_simpleheap located in the new stack.Note that this requires
spl_initto be called beforespl_relocate_stack_gdwhich in practice means thatspl_initmust be called fromboard_init_f.Signed-off-by Hans de Goede <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150915/491165ac/attachment.sig>