Skip to contentSkip to conversation

elan_i2c - Don't require known iap version

PATCH In review Daniel Drake 3 participants 6 messages Sep 18, 2015 – Sep 21, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 elan_i2c - Don't require known iap version

The Asus X456UA has an ELAN1000 touchpad with IAP version 0xe. This is unknown to elan_get_fwinfo() so driver probe fails and I am left with an unusable touchpad.

However, the fwinfo is not required for general driver usage, it is only needed if the user decides to upload new firmware.

Adjust the driver so that fwinfo is only calculated and used when it is really needed.

---
 drivers/input/mouse/elan_i2c_core.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

v2: simplified dev_err call

drivers/input/mouse/elan_i2c_core.c +17 -16
index fa94530..bababfe 100644
@@ -84,8 +84,6 @@ struct elan_tp_data {
 	int			pressure_adjustment;
 	u8			mode;
 	u8			ic_type;
-	u16			fw_validpage_count;
-	u16			fw_signature_address;
 
 	bool			irq_wake;
 
@@ -264,14 +262,6 @@ static int elan_query_device_info(struct elan_tp_data *data)
 	if (error)
 		return error;
 
-	error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count,
-				&data->fw_signature_address);
-	if (error) {
-		dev_err(&data->client->dev,
-			"unknown iap version %d\n", data->iap_version);
-		return error;
-	}
-
 	return 0;
 }
 
@@ -339,7 +329,8 @@ static int elan_write_fw_block(struct elan_tp_data *data,
 }
 
 static int __elan_update_firmware(struct elan_tp_data *data,
-				  const struct firmware *fw)
+				  const struct firmware *fw,
+				  u16 fw_validpage_count)
 {
 	struct i2c_client *client = data->client;
 	struct device *dev = &client->dev;
@@ -356,7 +347,7 @@ static int __elan_update_firmware(struct elan_tp_data *data,
 	iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]);
 
 	boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE;
-	for (i = boot_page_count; i < data->fw_validpage_count; i++) {
+	for (i = boot_page_count; i < fw_validpage_count; i++) {
 		u16 checksum = 0;
 		const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE];
 
@@ -393,7 +384,8 @@ static int __elan_update_firmware(struct elan_tp_data *data,
 }
 
 static int elan_update_firmware(struct elan_tp_data *data,
-				const struct firmware *fw)
+				const struct firmware *fw,
+				u16 fw_validpage_count)
 {
 	struct i2c_client *client = data->client;
 	int retval;
@@ -403,7 +395,7 @@ static int elan_update_firmware(struct elan_tp_data *data,
 	disable_irq(client->irq);
 	data->in_fw_update = true;
 
-	retval = __elan_update_firmware(data, fw);
+	retval = __elan_update_firmware(data, fw, fw_validpage_count);
 	if (retval) {
 		dev_err(&client->dev, "firmware update failed: %d\n", retval);
 		data->ops->iap_reset(client);
@@ -485,6 +477,15 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 	int error;
 	const u8 *fw_signature;
 	static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF};
+	u16 fw_validpage_count;
+	u16 fw_signature_address;
+
+	error = elan_get_fwinfo(data->iap_version, &fw_validpage_count,
+				&fw_signature_address);
+	if (error) {
+		dev_err(dev, "unknown iap version %d\n", data->iap_version);
+		return error;
+	}
 
 	/* Look for a firmware with the product id appended. */
 	fw_name = kasprintf(GFP_KERNEL, ETP_FW_NAME, data->product_id);
@@ -502,7 +503,7 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 	}
 
 	/* Firmware file must match signature data */
-	fw_signature = &fw->data[data->fw_signature_address];
+	fw_signature = &fw->data[fw_signature_address];
 	if (memcmp(fw_signature, signature, sizeof(signature)) != 0) {
 		dev_err(dev, "signature mismatch (expected %*ph, got %*ph)\n",
 			(int)sizeof(signature), signature,
@@ -515,7 +516,7 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 	if (error)
 		goto out_release_fw;
 
-	error = elan_update_firmware(data, fw);
+	error = elan_update_firmware(data, fw, fw_validpage_count);
 
 	mutex_unlock(&data->sysfs_mutex);
 
Signature · 1 line
2.1.4
maintainer
#1 lore raw

Hi Daniel,

Quoted 9 lines · Daniel Drake

The Asus X456UA has an ELAN1000 touchpad with IAP version 0xe. This is unknown to elan_get_fwinfo() so driver probe fails and I am left with an unusable touchpad.

However, the fwinfo is not required for general driver usage, it is only needed if the user decides to upload new firmware.

Adjust the driver so that fwinfo is only calculated and used when it is really needed.

I do not like the fact that the fact that the version of IAP is unknown is not known to the driver until we try to flash the firmware. I'd rather we check it upfront and warn user.

How about the version of the patch below?

Thanks!

Signature · 22 lines
Dmitry

Input: elan_i2c - don't require known iap version

From: Daniel Drake <[email protected]>

The Asus X456UA has an ELAN1000 touchpad with IAP version 0xe.  This is
unknown to elan_get_fwinfo() so driver probe fails and I am left with an
unusable touchpad.

However, the fwinfo is not required for general driver usage, it is only
needed if the user decides to upload new firmware.

Adjust the driver so that we do not abort probe when we encounter
unexpected IAP version, but rather warn user that firmware update feature
of the driver will not work.

Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
---
 drivers/input/mouse/elan_i2c_core.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/input/mouse/elan_i2c_core.c +7 -5
index fa94530..7cad819 100644
@@ -266,11 +266,10 @@ static int elan_query_device_info(struct elan_tp_data *data)
 
 	error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count,
 				&data->fw_signature_address);
-	if (error) {
-		dev_err(&data->client->dev,
-			"unknown iap version %d\n", data->iap_version);
-		return error;
-	}
+	if (error)
+		dev_warn(&data->client->dev,
+			 "unexpected iap version %#04x (ic type: %#04x), firmware update will not work\n",
+			 data->iap_version, data->ic_type);
 
 	return 0;
 }
@@ -486,6 +485,9 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 	const u8 *fw_signature;
 	static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF};
 
+	if (data->fw_validpage_count == 0)
+		return -EINVAL;
+
 	/* Look for a firmware with the product id appended. */
 	fw_name = kasprintf(GFP_KERNEL, ETP_FW_NAME, data->product_id);
 	if (!fw_name) {
#2 lore raw
Quoted 5 lines · Dmitry Torokhov

I do not like the fact that the fact that the version of IAP is unknown is not known to the driver until we try to flash the firmware. I'd rather we check it upfront and warn user.

How about the version of the patch below?

That looks fine and I also confirmed that the new patch is working as described.

Thanks
Daniel

maintainer
#3 lore raw
Quoted 9 lines · Daniel Drake
Quoted 5 lines · Dmitry Torokhov

I do not like the fact that the fact that the version of IAP is unknown is not known to the driver until we try to flash the firmware. I'd rather we check it upfront and warn user.

How about the version of the patch below?

That looks fine and I also confirmed that the new patch is working as described.

Great, I am applying this then.

Signature · 1 line
Dmitry
maintainer
#4 lore raw
Quoted 7 lines · Dmitry Torokhov
Quoted 6 lines · Daniel Drake
Quoted 4 lines · Dmitry Torokhov

I do not like the fact that the fact that the version of IAP is unknown is not known to the driver until we try to flash the firmware. I'd rather we check it upfront and warn user.

Quoted 5 lines
Quoted 3 lines
Quoted 1 line

How about the version of the patch below?

That looks fine and I also confirmed that the new patch is working as described.

Great, I am applying this then.

Duson, by the way, what is the FW parameters for iap 0x0e? Could you send me a patch?

Thanks!

Signature · 1 line
Dmitry
#5 lore raw

Hi Dmitry,

Sure, not only 0x0E but also others, I will send you a patch.

Thank you,
Duson

-----Original Message-----
From: Dmitry Torokhov [mailto:[email protected]]
Sent: Tuesday, September 22, 2015 12:21 AM
To: Daniel Drake
Cc: DusonLin; João Paulo Rechi Vita; [email protected]
Subject: Re: [PATCH v2] elan_i2c - Don't require known iap version

Quoted 10 lines · Dmitry Torokhov
Quoted 9 lines · Daniel Drake
Quoted 5 lines · Dmitry Torokhov

I do not like the fact that the fact that the version of IAP is unknown is not known to the driver until we try to flash the firmware. I'd rather we check it upfront and warn user.

How about the version of the patch below?

That looks fine and I also confirmed that the new patch is working as

described.

Quoted 2 lines

Great, I am applying this then.

Duson, by the way, what is the FW parameters for iap 0x0e? Could you send me a patch?

Thanks!

--
Dmitry

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html