spi : convert altera_spi to driver model
PATCH 1/1 spi : convert altera_spi to driver model
Convert altera_spi to driver model
--- drivers/spi/Kconfig | 8 ++ drivers/spi/altera_spi.c | 197 ++++++++++++++++++++++++++--------------------- 2 files changed, 119 insertions(+), 86 deletions(-)
drivers/spi/Kconfig +8 -0
@@ -15,6 +15,14 @@ config DM_SPI if DM_SPI +config ALTERA_SPI + bool "Altera SPI driver" + help + Enable the Altera SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Altera + IP core. Please find details on the "Embedded Peripherals IP + User Guide" of Altera. + config CADENCE_QSPI bool "Cadence QSPI driver" help
drivers/spi/altera_spi.c +111 -86
276 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 1/1 spi : convert altera_spi to driver model
Quoted 1 line · Thomas Chou
Convert
altera_spito driver model
Thanks for the patch, Thomas.
Quoted 2 lines
Signed-off-by Thomas Chou <[email protected]>
Quoted 29 lines
--- drivers/spi/Kconfig | 8 ++ drivers/spi/altera_spi.c | 197 ++++++++++++++++++++++++++--------------------- 2 files changed, 119 insertions(+), 86 deletions(-)drivers/spi/Kconfig +8
-0@@ -15,6 +15,14 @@ config DM_SPI if DM_SPI +config ALTERA_SPI + bool "Altera SPI driver" + help + Enable the Altera SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Altera + IP core. Please find details on the "Embedded Peripherals IP + User Guide" of Altera. + config CADENCE_QSPI bool "Cadence QSPI driver" helpdrivers/spi/altera_spi.c +0
-0
drivers/spi/altera_spi.c line 16
Quoted 10 lines
drivers/spi/altera_spi.c +4
-1@@ -8,18 +8,19 @@* SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <asm/io.h> +#include <dm.h> +#include <errno.h> #include <malloc.h> #include <spi.h> +#include <fdtdec.h> +#include <asm/io.h>
Just check it fdtdec.h and errno.h not required to add - part of common.h
Quoted 274 lines
drivers/spi/altera_spi.c +107
-86+ +DECLARE_GLOBAL_DATA_PTR ;#ifndef CONFIG_ALTERA_SPI_IDLE_VAL #define CONFIG_ALTERA_SPI_IDLE_VAL 0xff#endif -#ifndef CONFIG_SYS_ALTERA_SPI_LIST -#define CONFIG_SYS_ALTERA_SPI_LIST { CONFIG_SYS_SPI_BASE } -#endif -struct altera_spi_regs {u32 rxdata;u32 txdata;@@ -29,102 +30,68 @@ struct altera_spi_regs {u32 slave_sel; }; -#define ALTERA_SPI_STATUS_ROE_MSK (1 << 3) -#define ALTERA_SPI_STATUS_TOE_MSK (1 << 4) -#define ALTERA_SPI_STATUS_TMT_MSK (1 << 5) -#define ALTERA_SPI_STATUS_TRDY_MSK (1 << 6) -#define ALTERA_SPI_STATUS_RRDY_MSK (1 << 7) -#define ALTERA_SPI_STATUS_E_MSK (1 << 8) - -#define ALTERA_SPI_CONTROL_IROE_MSK (1 << 3) -#define ALTERA_SPI_CONTROL_ITOE_MSK (1 << 4) -#define ALTERA_SPI_CONTROL_ITRDY_MSK (1 << 6) -#define ALTERA_SPI_CONTROL_IRRDY_MSK (1 << 7) -#define ALTERA_SPI_CONTROL_IE_MSK (1 << 8) -#define ALTERA_SPI_CONTROL_SSO_MSK (1 << 10) - -static ulong altera_spi_base_list[] =CONFIG_SYS_ALTERA_SPI_LIST ; +struct altera_spi_platdata { +struct altera_spi_regs *regs; +}; -struct altera_spi_slave { -struct spi_slave slave; -struct altera_spi_regs *regs; +struct altera_spi_priv { +struct altera_spi_regs *regs; }; -#define to_altera_spi_slave (s) container_of(s, struct altera_spi_slave, slave) -__weak int spi_cs_is_valid (unsigned int bus,unsigned int cs) -{ -return bus <ARRAY_SIZE (altera_spi_base_list) && cs <32 ; -} +#define ALTERA_SPI_STATUS_RRDY_MSK (1 << 7) +#define ALTERA_SPI_CONTROL_SSO_MSK (1 << 10) -__weak void spi_cs_activate (struct spi_slave *slave) +static void spi_cs_activate (struct udevice *dev,uint cs) { -struct altera_spi_slave *altspi =to_altera_spi_slave (slave); -writel (1 << slave->cs, &altspi->regs->slave_sel); -writel (ALTERA_SPI_CONTROL_SSO_MSK , &altspi->regs->control); -} +struct udevice *bus = dev->parent; +struct altera_spi_priv *priv =dev_get_priv (bus); +struct altera_spi_regs *const regs = priv->regs; -__weak void spi_cs_deactivate (struct spi_slave *slave) -{ -struct altera_spi_slave *altspi =to_altera_spi_slave (slave); -writel (0 , &altspi->regs->control); -writel (0 , &altspi->regs->slave_sel); +writel (1 << cs, ®s->slave_sel); +writel (ALTERA_SPI_CONTROL_SSO_MSK , ®s->control); } -void spi_init (void ) +static void spi_cs_deactivate (struct udevice *dev) { -} +struct udevice *bus = dev->parent; +struct altera_spi_priv *priv =dev_get_priv (bus); +struct altera_spi_regs *const regs = priv->regs; -void spi_set_speed (struct spi_slave *slave,uint hz) -{ -/* altera spi core does not support programmable speed */ +writel (0 , ®s->control); +writel (0 , ®s->slave_sel); } -struct spi_slave *spi_setup_slave (unsigned int bus,unsigned int cs, -unsigned int max_hz,unsigned int mode) +static int altera_spi_claim_bus (struct udevice *dev) { -struct altera_spi_slave *altspi; - -if (!spi_cs_is_valid (bus, cs)) -return NULL ; - - altspi = spi_alloc_slave(struct altera_spi_slave, bus, cs); -if (!altspi) -return NULL ; +struct udevice *bus = dev->parent; +struct altera_spi_priv *priv =dev_get_priv (bus); +struct altera_spi_regs *const regs = priv->regs; - altspi->regs = (struct altera_spi_regs *)altera_spi_base_list[bus]; -debug ("%s: bus:%i cs:%i base:%p\n" , __func__, bus, cs, altspi->regs); +writel (0 , ®s->control); +writel (0 , ®s->slave_sel); -return &altspi->slave; +return 0 ; } -void spi_free_slave (struct spi_slave *slave) +static int altera_spi_release_bus (struct udevice *dev) { -struct altera_spi_slave *altspi =to_altera_spi_slave (slave); -free (altspi); -} +struct udevice *bus = dev->parent; +struct altera_spi_priv *priv =dev_get_priv (bus); +struct altera_spi_regs *const regs = priv->regs; -int spi_claim_bus (struct spi_slave *slave) -{ -struct altera_spi_slave *altspi =to_altera_spi_slave (slave); +writel (0 , ®s->slave_sel); -debug ("%s: bus:%i cs:%i\n" , __func__, slave->bus, slave->cs); -writel (0 , &altspi->regs->control); -writel (0 , &altspi->regs->slave_sel);return 0 ; } -void spi_release_bus (struct spi_slave *slave) +static int altera_spi_xfer (struct udevice *dev,unsigned int bitlen, +const void *dout,void *din,unsigned long flags) { -struct altera_spi_slave *altspi =to_altera_spi_slave (slave); +struct udevice *bus = dev->parent; +struct altera_spi_priv *priv =dev_get_priv (bus); +struct altera_spi_regs *const regs = priv->regs; +struct dm_spi_slave_platdata *slave_plat =dev_get_parent_platdata (dev); -debug ("%s: bus:%i cs:%i\n" , __func__, slave->bus, slave->cs); -writel (0 , &altspi->regs->slave_sel); -} - -int spi_xfer (struct spi_slave *slave,unsigned int bitlen,const void *dout, -void *din,unsigned long flags) -{ -struct altera_spi_slave *altspi =to_altera_spi_slave (slave);/* assume spi core configured to do 8 bit transfers */ unsigned int bytes = bitlen /8 ;const unsigned char *txp = dout;@@ -132,7 +99,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,uint32_t reg, data, start;debug ("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n" , __func__, - slave->bus, slave->cs, bitlen, bytes, flags); + bus->seq, slave_plat->cs, bitlen, bytes, flags);if (bitlen ==0 ) goto done;@@ -143,11 +110,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, }/* empty read buffer */ -if (readl (&altspi->regs->status) &ALTERA_SPI_STATUS_RRDY_MSK ) -readl (&altspi->regs->rxdata); +if (readl (®s->status) &ALTERA_SPI_STATUS_RRDY_MSK ) +readl (®s->rxdata);if (flags &SPI_XFER_BEGIN ) -spi_cs_activate (slave); +spi_cs_activate (dev, slave_plat->cs);while (bytes--) {if (txp)@@ -156,20 +123,20 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, data =CONFIG_ALTERA_SPI_IDLE_VAL ;debug ("%s: tx:%x " , __func__, data); -writel (data, &altspi->regs->txdata); +writel (data, ®s->txdata); start =get_timer (0 );while (1 ) { - reg =readl (&altspi->regs->status); + reg =readl (®s->status);if (reg &ALTERA_SPI_STATUS_RRDY_MSK )break ;if (get_timer (start) > (CONFIG_SYS_HZ /1000 )) { -printf ("%s: Transmission timed out!\n" , __func__); - goto done; +debug ("%s: Transmission timed out!\n" , __func__); +return -1 ; } } - data =readl (&altspi->regs->rxdata); + data =readl (®s->rxdata);if (rxp) *rxp++ = data &0xff ;@@ -178,7 +145,65 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, done:if (flags &SPI_XFER_END ) -spi_cs_deactivate (slave); +spi_cs_deactivate (dev);return 0 ; } + +static int altera_spi_set_speed (struct udevice *bus,uint speed) +{ +return 0 ; +} + +static int altera_spi_set_mode (struct udevice *bus,uint mode) +{ +return 0 ; +} + +static int altera_spi_probe (struct udevice *bus) +{ +struct altera_spi_platdata *plat =dev_get_platdata (bus); +struct altera_spi_priv *priv =dev_get_priv (bus); + + priv->regs = plat->regs; + +return 0 ; +} + +static int altera_spi_ofdata_to_platdata (struct udevice *bus) +{ +struct altera_spi_platdata *plat =dev_get_platdata (bus); + + plat->regs =ioremap (dev_get_addr (bus), +sizeof (struct altera_spi_regs )); + +return 0 ; +} + +static const struct dm_spi_ops altera_spi_ops = { + .claim_bus = altera_spi_claim_bus, + .release_bus = altera_spi_release_bus, + .xfer = altera_spi_xfer, + .set_speed = altera_spi_set_speed, + .set_mode = altera_spi_set_mode, +/* +* cs_info is not needed, since we require all chip selects to be +* in the device tree explicitly +*/ +}; + +static const struct udevice_id altera_spi_ids[] = { + { .compatible ="altr,spi-1.0" , }, + { } +}; + +U_BOOT_DRIVER (altera_spi) = { + .name ="altera_spi" , + .id =UCLASS_SPI , + .of_match = altera_spi_ids, + .ops = &altera_spi_ops, + .ofdata_to_platdata = altera_spi_ofdata_to_platdata, + .platdata_auto_alloc_size =sizeof (struct altera_spi_platdata ), + .priv_auto_alloc_size =sizeof (struct altera_spi_priv ), + .probe = altera_spi_probe, +}; --2.1.4
Quoted 4 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
thanks!
Signature · 1 line
Jagan | openedev.
PATCH 1/1 spi : convert altera_spi to driver model
Hi Jagan,
Quoted 9 lines · Jagan Teki
Quoted 1 line · Thomas Chou
Convert
altera_spito driver modelThanks for the patch, Thomas.
Quoted 2 lines
Signed-off-by Thomas Chou <[email protected]>Reviewed-by Jagan Teki <[email protected]>
May I pick up this patch? As a custodian of the nios arch, I would like to include it to the series of patches that convert all nios2 related drivers to driver model and device tree control, which will be after v2015.10. Thank you in advance.
Best regards,
Thomas Chou
PATCH 1/1 spi : convert altera_spi to driver model
Quoted 15 lines · Thomas Chou
Hi Jagan,
Quoted 12 lines · Jagan Teki
Quoted 2 lines · Thomas Chou
Convert
altera_spito driver modelThanks for the patch, Thomas.
Quoted 2 lines
Signed-off-by Thomas Chou <[email protected]>
Quoted 7 lines
Quoted 1 line
Reviewed-by Jagan Teki <[email protected]>May I pick up this patch? As a custodian of the nios arch, I would like to include it to the series of patches that convert all nios2 related drivers to driver model and device tree control, which will be after v2015.10. Thank you in advance.
Please pick.
-- Jagan.
PATCH 1/1 spi : convert altera_spi to driver model
In reply to Thomas ChouQuoted 3 lines · Thomas Chou
Convert
altera_spito driver modelSigned-off-by Thomas Chou <[email protected]>
Hi!
Quoted 5 lines
--- drivers/spi/Kconfig | 8 ++ drivers/spi/altera_spi.c | 197++++++++++++++++++++++++++--------------------- 2 files changed, 119 insertions(+), 86 deletions(-)
[...]
drivers/spi/altera_spi.c int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, · line 161
Quoted 10 lines
drivers/spi/altera_spi.c +10
-0+ +static int altera_spi_set_speed (struct udevice *bus,uint speed) +{ +return 0 ; +} + +static int altera_spi_set_mode (struct udevice *bus,uint mode) +{ +return 0 ; +}
I suspect you might want to tweak the core code to check if those .set_speed and .set_mode are assigned in dm_spi_ops structure and if not, don't call them.
Quoted 6 lines
drivers/spi/altera_spi.c +6
-0+static int altera_spi_probe (struct udevice *bus) +{ +struct altera_spi_platdata *plat =dev_get_platdata (bus); +struct altera_spi_priv *priv =dev_get_priv (bus); + + priv->regs = plat->regs;
drivers/spi/altera_spi.c int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, · line 178
Quoted 10 lines
drivers/spi/altera_spi.c +10
-0+ +return 0 ; +} + +static int altera_spi_ofdata_to_platdata (struct udevice *bus) +{ +struct altera_spi_platdata *plat =dev_get_platdata (bus); + + plat->regs =ioremap (dev_get_addr (bus), +sizeof (struct altera_spi_regs ));
I guess the same thing about ioremap() and ranges applies here?
Review
Quoted 2 lines
(quoted diff) +2
-0+ return 0; +}
But all these are minor nits, thanks !
[...]
PATCH 1/1 spi : convert altera_spi to driver model
Hi Marek,
Quoted 3 lines · Marek Vasut
I suspect you might want to tweak the core code to check if those .set_speed and .set_mode are assigned in
dm_spi_opsstructure and if not, don't call them.
I wonder if this worths, as altera_spi is the only one that cannot set speed and mode.
Quoted 5 lines
drivers/spi/altera_spi.c int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, · line 178
Quoted 2 lines
drivers/spi/altera_spi.c +2
-0+ plat->regs =ioremap (dev_get_addr (bus), +sizeof (struct altera_spi_regs ));I guess the same thing about
ioremap()and ranges applies here?
Same thing about ioremap(), as almost every other arch does not include it in u-boot. You see that I just added it to nios2 lately.
Sometimes the address returned by dev_get_addr() may be used as memory, and does not need ioremap.
Best regards,
Thomas
PATCH 1/1 spi : convert altera_spi to driver model
Quoted 1 line · Thomas Chou
Hi Marek,
Hi,
Quoted 7 lines · Marek Vasut
Quoted 3 lines
I suspect you might want to tweak the core code to check if those .set_speed and .set_mode are assigned in
dm_spi_opsstructure and if not, don't call them.I wonder if this worths, as
altera_spiis the only one that cannot set speed and mode.
I'm expecting that EPCQ Wundercontroller to have the same problem (see [1] section 42, Altera GQSPI). Altera tried to push this into mainline Linux even [2], without much success, in particular because they duplicated half of the spi-nor stack to do it. I suspect this driver is coming to U-Boot sooner or later.
But maybe we should do this change to the SPI NOR stuff once this driver hits the U-Boot ML instead of preemptively adding such checks. What do you think ?
[1] https://www.altera.com/content/dam/altera-
www/global/en_US/pdfs/literature/ug/ug_embedded_ip.pdf
[2] https://lwn.net/Articles/636882/
Quoted 10 lines
Quoted 4 lines
drivers/spi/altera_spi.c int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, · line 178
Quoted 2 lines
drivers/spi/altera_spi.c +2
-0+ plat->regs =ioremap (dev_get_addr (bus), +sizeof (struct altera_spi_regs ));I guess the same thing about
ioremap()and ranges applies here?Same thing about
ioremap(), as almost every other arch does not include it in u-boot. You see that I just added it to nios2 lately.Sometimes the address returned by
dev_get_addr()may be used as memory, and does not need ioremap.
Gotcha.
Best regards,
Marek Vasut
PATCH 1/1 spi : convert altera_spi to driver model
Hi Marek,
Quoted 9 lines · Marek Vasut
I'm expecting that EPCQ Wundercontroller to have the same problem (see [1] section 42, Altera GQSPI). Altera tried to push this into mainline Linux even [2], without much success, in particular because they duplicated half of the spi-nor stack to do it. I suspect this driver is coming to U-Boot sooner or later.
But maybe we should do this change to the SPI NOR stuff once this driver hits the U-Boot ML instead of preemptively adding such checks. What do you think ?
Just sent the patch to skip the checks as separated. [PATCH] spi: ignore set speed and mode if not available
Best regards,
Thomas
PATCH 1/1 spi : convert altera_spi to driver model
Quoted 1 line · Thomas Chou
Hi Marek,
Hi!
Quoted 7 lines · Marek Vasut
Quoted 6 lines
I'm expecting that EPCQ Wundercontroller to have the same problem (see
[1] section 42, Altera GQSPI). Altera tried to push this into mainline Linux even [2], without much success, in particular because they duplicated half of the spi-nor stack to do it. I suspect this driver is coming to U-Boot sooner or later.
Quoted 6 lines
Quoted 3 lines
But maybe we should do this change to the SPI NOR stuff once this driver hits the U-Boot ML instead of preemptively adding such checks. What do you think ?
Just sent the patch to skip the checks as separated. [PATCH] spi: ignore set speed and mode if not available
Thanks :)
Best regards,
Marek Vasut
PATCH 1/1 spi : convert altera_spi to driver model
In reply to Thomas ChouQuoted 7 lines · Thomas Chou
Convert
altera_spito driver modelSigned-off-by Thomas Chou <[email protected]>--- drivers/spi/Kconfig | 8 ++ drivers/spi/altera_spi.c | 197 ++++++++++++++++++++++++++--------------------- 2 files changed, 119 insertions(+), 86 deletions(-)
Applied to u-boot-nios.