dtc: dts source location annotation

From: Frank Rowand <frank.rowand-/[email protected]>

Proof of concept patch.

Annotates input source file and line number of nodes and properties as comments in output .dts file when --annotate flag is supplied.

A common dts source file convention is for a system .dts file to include default SOC and/or device .dtsi files and then add additional system specific properties or over-ride property values from the .dtsi files. It can be a time consuming and error prone exercise to determine exactly what nodes, properties, and property values are in the final .dtb binary blob and where they originated.

Modify the dtc compiler to read a (possibly cpp pre-processed) .dts file and for the output .dts annotate each node and property with the corresponding source location.

As an example, one device tree node for the dragonboard in the Linux kernel source tree is:

sdhci@f9824900 { /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:14 */

                        compatible = "qcom,sdhci-msm-v4"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:240 */
                        reg = <0xf9824900 0x11c 0xf9824000 0x800>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:241 */
                        reg-names = "hc_mem", "core_mem"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:242 */
                        interrupts = <0x0 0x7b 0x0 0x0 0x8a 0x0>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:243 */
                        interrupt-names = "hc_irq", "pwr_irq"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:244 */
                        clocks = <0xd 0xd8 0xd 0xd7>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:245 */
                        clock-names = "core", "iface"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:246 */
                        status = "ok"; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:17 */
                        bus-width = <0x8>; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:15 */
                        non-removable; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:16 */
                }; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:18 */

qcom-apq8074-dragonboard.dts:
- last referenced the sdhci node
- changed the value of the "status" property from "disabled" to "ok"
- added two properties, "bus-width" and "non-removable"

qcom-msm8974.dtsi:
- initially set the value the "status" property to "disabled" (not visible in the annotated .dts)
- provided all of the other property values

When the dtc compiler is run within the Linux kernel build system, the path of the source files will be the full absolute path, just as seen for gcc warnings and errors. I always trim away the path leading up to the Linux kernel source tree by passing the kernel build output through a sed pipe. I have done the same to the above example to remove the excessive verbosity in the source paths.

Implementation notes:

- The source location of each node and property is saved in the respective node or property during the parse phase because the source location information from current_srcfile is no longer available when the final values are written out from dt_to_source() and the functions that it calls.

- A check is added to dtc.c to ensure that input and output format are both device tree source. An alternate choice would be to turn off the --annotate flag if either the input file or the output file is not device tree source. In the alternate case, the disabling of --annotate could be silent or a warning could be issued.

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 dtc-parser.y |   14 ++++++++++++--
 dtc.c        |    9 +++++++++
 dtc.h        |   12 +++++++++++-
 flattree.c   |    2 +-
 fstree.c     |    2 +-
 livetree.c   |   40 +++++++++++++++++++++++++++++++++++++++-
 treesource.c |   27 ++++++++++++++++++++++-----
 7 files changed, 95 insertions(+), 11 deletions(-)

Index: b/dtc.h
===================================================================

dtc.h +1 -0

@@ -54,6 +54,7 @@ extern int reservenum;		/* Number of mem
 extern int minsize;		/* Minimum blob size */
 extern int padsize;		/* Additional padding to blob */
 extern int phandle_format;	/* Use linux,phandle or phandle properties */
+extern bool annotate;		/* annotate .dts with input source location */
 
 #define PHANDLE_LEGACY	0x1
 #define PHANDLE_EPAPR	0x2

dtc.h +5 -1

 struct label {
 	bool deleted;
 	char *label;

@@ -140,6 +146,7 @@ struct property {
 	struct property *next;
 
 	struct label *labels;
+	struct src src;
 };
 
 struct node {

@@ -158,6 +165,8 @@ struct node {
 	int addr_cells, size_cells;
 
 	struct label *labels;
+	struct src begin_src;
+	struct src end_src;
 };
 
 #define for_each_label_withdel(l0, l) \

@@ -189,7 +198,8 @@ struct property *build_property_delete(c
 struct property *chain_property(struct property *first, struct property *list);
 struct property *reverse_properties(struct property *first);
 
-struct node *build_node(struct property *proplist, struct node *children);
+struct src *start_node(void);
+struct node *build_node(struct src *begin_src, struct property *proplist, struct node *children);
 struct node *build_node_delete(void);
 struct node *name_node(struct node *node, char *name);
 struct node *chain_node(struct node *first, struct node *list);

Index: b/livetree.c
===================================================================

livetree.c +1 -0

@@ -19,6 +19,7 @@
  */
 
 #include "dtc.h"
+#include "srcpos.h"
 
 /*
  * Tree building functions

livetree.c +28 -1

+	}
 
 	return new;
 }

@@ -97,7 +106,22 @@ struct property *reverse_properties(stru
 	return head;
 }
 
-struct node *build_node(struct property *proplist, struct node *children)
+struct src *start_node(void)
+{
+	struct src *new = xmalloc(sizeof(*new));
+
+	if (current_srcfile) {
+		new->name = current_srcfile->name;
+		new->lineno = current_srcfile->lineno;
+	} else {
+		new->name = "__builtin__";
+		new->lineno = 0;
+	}
+
+	return new;
+}
+
+struct node *build_node(struct src *begin_src, struct property *proplist, struct node *children)
 {
 	struct node *new = xmalloc(sizeof(*new));
 	struct node *child;

@@ -111,6 +135,16 @@ struct node *build_node(struct property
 		child->parent = new;
 	}
 
+	if (begin_src) {
+		new->begin_src = *begin_src;
+		free(begin_src);
+	}
+
+	if (current_srcfile) {
+		new->end_src.name = current_srcfile->name;
+		new->end_src.lineno = current_srcfile->lineno;
+	}
+
 	return new;
 }
 

@@ -169,6 +203,7 @@ struct node *merge_nodes(struct node *ol
 
 				old_prop->val = new_prop->val;
 				old_prop->deleted = 0;
+				old_prop->src = new_prop->src;
 				free(new_prop);
 				new_prop = NULL;
 				break;

treesource.c +19 -4

+		else
+			fprintf(f, ";\n");
 		return;
 	}
 

@@ -230,7 +234,10 @@ static void write_propval(FILE *f, struc
 		write_propval_bytes(f, prop->val);
 	}
 
-	fprintf(f, ";\n");
+	if (annotate)
+		fprintf(f, "; /* %s:%d */\n", prop->src.name, prop->src.lineno);
+	else
+		fprintf(f, ";\n");
 }
 
 static void write_tree_source_node(FILE *f, struct node *tree, int level)

@@ -242,10 +249,16 @@ static void write_tree_source_node(FILE
 	write_prefix(f, level);
 	for_each_label(tree->labels, l)
 		fprintf(f, "%s: ", l->label);
+
 	if (tree->name && (*tree->name))
-		fprintf(f, "%s {\n", tree->name);
+		fprintf(f, "%s {", tree->name);
 	else
-		fprintf(f, "/ {\n");
+		fprintf(f, "/ {");
+	if (annotate) {
+		fprintf(f, " /* %s:%d */\n",
+			tree->begin_src.name, tree->begin_src.lineno);
+	} else
+		fprintf(f, "\n");
 
 	for_each_property(tree, prop) {
 		write_prefix(f, level+1);

@@ -259,7 +272,11 @@ static void write_tree_source_node(FILE
 		write_tree_source_node(f, child, level+1);
 	}
 	write_prefix(f, level);
-	fprintf(f, "};\n");
+	if (annotate)
+		fprintf(f, "}; /* %s:%d */\n",
+			tree->end_src.name, tree->end_src.lineno);
+	else
+		fprintf(f, "};\n");
 }
 
 

Index: b/dtc.c
===================================================================

dtc.c +1 -0

@@ -29,6 +29,7 @@ int reservenum;		/* Number of memory res
 int minsize;		/* Minimum blob size */
 int padsize;		/* Additional padding to blob */
 int phandle_format = PHANDLE_BOTH;	/* Use linux,phandle or phandle properties */
+bool annotate = false;	/* annotate .dts with input source location */
 
 static void fill_fullpaths(struct node *tree, const char *prefix)
 {

dtc.c +7 -0

 	{NULL,               no_argument, NULL, 0x0},
 };
 static const char * const usage_opts_help[] = {

@@ -101,6 +103,7 @@ static const char * const usage_opts_hel
 	"\n\tEnable/disable errors (prefix with \"no-\")",
 	"\n\tPrint this help and exit",
 	"\n\tPrint version and exit",
+	"\n\tAnnotate output .dts with input source file and line",
 	NULL,
 };
 

@@ -125,6 +128,9 @@ int main(int argc, char *argv[])
 
 	while ((opt = util_getopt_long()) != EOF) {
 		switch (opt) {
+		case 'a':
+			annotate = true;
+			break;
 		case 'I':
 			inform = optarg;
 			break;

@@ -213,6 +219,9 @@ int main(int argc, char *argv[])
 		fprintf(depfile, "%s:", outname);
 	}
 
+	if (annotate && (!streq(inform, "dts") || !streq(outform, "dts")))
+		die("--annotate requires -I dts -O dts\n");
+
 	if (streq(inform, "dts"))
 		bi = dt_from_source(arg);
 	else if (streq(inform, "fs"))

Index: b/dtc-parser.y
===================================================================

dtc-parser.y +12 -2

@@ -48,6 +48,7 @@ extern bool treesource_error;
 
 	struct property *prop;
 	struct property *proplist;
+	struct src *src;
 	struct node *node;
 	struct node *nodelist;
 	struct reserve_info *re;

@@ -78,6 +79,7 @@ extern bool treesource_error;
 %type <prop> propdef
 %type <proplist> proplist
 
+%type <src> openbrace
 %type <node> devicetree
 %type <node> nodedef
 %type <node> subnode

@@ -177,12 +179,20 @@ devicetree:
 	;
 
 nodedef:
-	  '{' proplist subnodes '}' ';'
+	  openbrace proplist subnodes '}' ';'
 		{
-			$$ = build_node($2, $3);
+			$$ = build_node($1, $2, $3);
 		}
 	;
 
+openbrace:
+	  '{'
+		{
+			$$ = start_node();
+		}
+	;
+
+
 proplist:
 	  /* empty */
 		{

Index: b/flattree.c
===================================================================

flattree.c +1 -1

@@ -748,7 +748,7 @@ static struct node *unflatten_tree(struc
 	char *flatname;
 	uint32_t val;
 
-	node = build_node(NULL, NULL);
+	node = build_node(NULL, NULL, NULL);
 
 	flatname = flat_read_string(dtbuf);
 

Index: b/fstree.c
===================================================================

fstree.c +1 -1

@@ -34,7 +34,7 @@ static struct node *read_fstree(const ch
 	if (!d)
 		die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
 
-	tree = build_node(NULL, NULL);
+	tree = build_node(NULL, NULL, NULL);
 
 	while ((de = readdir(d)) != NULL) {
 		char *tmpname;

Quoted 3 lines · Frank Rowand

From: Frank Rowand <frank.rowand-/[email protected]>

Proof of concept patch.

Still like the idea, still some some problems with the implementation.

Quoted 92 lines

Annotates input source file and line number of nodes and properties as comments in output .dts file when --annotate flag is supplied.

A common dts source file convention is for a system .dts file to include default SOC and/or device .dtsi files and then add additional system specific properties or over-ride property values from the .dtsi files. It can be a time consuming and error prone exercise to determine exactly what nodes, properties, and property values are in the final .dtb binary blob and where they originated.

Modify the dtc compiler to read a (possibly cpp pre-processed) .dts file and for the output .dts annotate each node and property with the corresponding source location.

As an example, one device tree node for the dragonboard in the Linux kernel source tree is:

sdhci@f9824900 { /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:14 */

                        compatible = "qcom,sdhci-msm-v4"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:240 */
                        reg = <0xf9824900 0x11c 0xf9824000 0x800>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:241 */
                        reg-names = "hc_mem", "core_mem"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:242 */
                        interrupts = <0x0 0x7b 0x0 0x0 0x8a 0x0>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:243 */
                        interrupt-names = "hc_irq", "pwr_irq"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:244 */
                        clocks = <0xd 0xd8 0xd 0xd7>; /* arch/arm/boot/dts/qcom-msm8974.dtsi:245 */
                        clock-names = "core", "iface"; /* arch/arm/boot/dts/qcom-msm8974.dtsi:246 */
                        status = "ok"; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:17 */
                        bus-width = <0x8>; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:15 */
                        non-removable; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:16 */
                }; /* arch/arm/boot/dts/qcom-apq8074-dragonboard.dts:18 */

qcom-apq8074-dragonboard.dts:
- last referenced the sdhci node
- changed the value of the "status" property from "disabled" to "ok"
- added two properties, "bus-width" and "non-removable"

qcom-msm8974.dtsi:
- initially set the value the "status" property to "disabled" (not visible in the annotated .dts)
- provided all of the other property values

When the dtc compiler is run within the Linux kernel build system, the path of the source files will be the full absolute path, just as seen for gcc warnings and errors. I always trim away the path leading up to the Linux kernel source tree by passing the kernel build output through a sed pipe. I have done the same to the above example to remove the excessive verbosity in the source paths.

Implementation notes:

- The source location of each node and property is saved in the respective node or property during the parse phase because the source location information from current_srcfile is no longer available when the final values are written out from dt_to_source() and the functions that it calls.

- A check is added to dtc.c to ensure that input and output format are both device tree source. An alternate choice would be to turn off the --annotate flag if either the input file or the output file is not device tree source. In the alternate case, the disabling of --annotate could be silent or a warning could be issued.

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 dtc-parser.y |   14 ++++++++++++--
 dtc.c        |    9 +++++++++
 dtc.h        |   12 +++++++++++-
 flattree.c   |    2 +-
 fstree.c     |    2 +-
 livetree.c   |   40 +++++++++++++++++++++++++++++++++++++++-
 treesource.c |   27 ++++++++++++++++++++++-----
 7 files changed, 95 insertions(+), 11 deletions(-)

Index: b/dtc.h
===================================================================

dtc.h +1 -0

@@ -54,6 +54,7 @@ extern int reservenum;		/* Number of mem
 extern int minsize;		/* Minimum blob size */
 extern int padsize;		/* Additional padding to blob */
 extern int phandle_format;	/* Use linux,phandle or phandle properties */
+extern bool annotate;		/* annotate .dts with input source location */
 
 #define PHANDLE_LEGACY	0x1
 #define PHANDLE_EPAPR	0x2

@@ -126,6 +127,11 @@ bool data_is_one_string(struct data d);
 #define MAX_NODENAME_LEN	31
 

dtc.h bool data_is_one_string(struct data d); · line 133

Quoted 5 lines

dtc.h +4 -0

 /* Live trees */
+struct src {
+	char *name;
+	int lineno;
+};

Still not seeing an explanation for why you need this, instead of using the existing struct srcpos.

Quoted 45 lines

dtc.h +5 -1

 struct label {
 	bool deleted;
 	char *label;

@@ -140,6 +146,7 @@ struct property {
 	struct property *next;
 
 	struct label *labels;
+	struct src src;
 };
 
 struct node {

@@ -158,6 +165,8 @@ struct node {
 	int addr_cells, size_cells;
 
 	struct label *labels;
+	struct src begin_src;
+	struct src end_src;
 };
 
 #define for_each_label_withdel(l0, l) \

@@ -189,7 +198,8 @@ struct property *build_property_delete(c
 struct property *chain_property(struct property *first, struct property *list);
 struct property *reverse_properties(struct property *first);
 
-struct node *build_node(struct property *proplist, struct node *children);
+struct src *start_node(void);
+struct node *build_node(struct src *begin_src, struct property *proplist, struct node *children);
 struct node *build_node_delete(void);
 struct node *name_node(struct node *node, char *name);
 struct node *chain_node(struct node *first, struct node *list);

Index: b/livetree.c
===================================================================

livetree.c +1 -0

@@ -19,6 +19,7 @@
  */
 
 #include "dtc.h"
+#include "srcpos.h"
 
 /*
  * Tree building functions

@@ -58,6 +59,14 @@ struct property *build_property(char *na
 

livetree.c struct property *build_property(char *na · line 62

Quoted 3 lines

livetree.c +1 -0

 	new->name = name;
 	new->val = val;
+	if (current_srcfile) {

So referencing current_srcfile outside of the lexer isn't strictly speaking safe. You'll get away with it at the moment, but in theory the lexer/parser internal state (and hence the source location) could be ahead of where it's actually executed parser actions for - and those are what will cause build_property().

At the moment you'll get away with it, but if we ever add syntax that needs the %glr-parser Bison option, then this will actually break.

livetree.c struct property *build_property(char *na · line 68

Quoted 6 lines

livetree.c +6 -0

+		new->src.name = current_srcfile->name;
+		new->src.lineno = current_srcfile->lineno;
+	} else {
+		/* adding implicit property, such as phandle */
+		new->src.name = "__builtin__";
+		new->src.lineno = 0;

Minor nit, I think it would be cleaner to just leave node->src NULL, and format that how we like on the output side.

Quoted 55 lines

livetree.c +28 -1

+	}
 
 	return new;
 }

@@ -97,7 +106,22 @@ struct property *reverse_properties(stru
 	return head;
 }
 
-struct node *build_node(struct property *proplist, struct node *children)
+struct src *start_node(void)
+{
+	struct src *new = xmalloc(sizeof(*new));
+
+	if (current_srcfile) {
+		new->name = current_srcfile->name;
+		new->lineno = current_srcfile->lineno;
+	} else {
+		new->name = "__builtin__";
+		new->lineno = 0;
+	}
+
+	return new;
+}
+
+struct node *build_node(struct src *begin_src, struct property *proplist, struct node *children)
 {
 	struct node *new = xmalloc(sizeof(*new));
 	struct node *child;

@@ -111,6 +135,16 @@ struct node *build_node(struct property
 		child->parent = new;
 	}
 
+	if (begin_src) {
+		new->begin_src = *begin_src;
+		free(begin_src);
+	}
+
+	if (current_srcfile) {
+		new->end_src.name = current_srcfile->name;
+		new->end_src.lineno = current_srcfile->lineno;
+	}
+
 	return new;
 }
 

@@ -169,6 +203,7 @@ struct node *merge_nodes(struct node *ol
 
 				old_prop->val = new_prop->val;
 				old_prop->deleted = 0;
+				old_prop->src = new_prop->src;
 				free(new_prop);
 				new_prop = NULL;
 				break;

livetree.c struct node *merge_nodes(struct node *ol · line 252

Quoted 9 lines

livetree.c +3 -0

@@ -209,6 +244,9 @@ struct node *merge_nodes(struct node *ol
 			add_child(old_node, new_child);
 	}
 
+	old_node->begin_src = new_node->begin_src;
+	old_node->end_src = new_node->end_src;
+
 	/* The new node contents are now merged into the old node.  Free
 	 * the new node. */
 	free(new_node);

So, it's actually much easier than this to get the location information. The lexer and parser are already tracking the location of *every* grammar symbol. In the rules in dtc-parser.y @$ will give you a struct srcpos with the location of the LHS of the production, @1..@N will give you a srcpos for each symbol on the RHS.

See the "Tracking Locations" section in the Bison info for more information.

So all you need to do is add struct srcpos * parameter to build_property and build_node, and pass in &@$ from the parser. Other callers can pass NULL to record that source location isn't available.

I'm not sure of the lifetime of the struct srcpos handled by the parser, so you might need to dupe the structures.

Quoted 8 lines

Index: b/treesource.c
===================================================================

treesource.c +0 -0

@@ -202,7 +202,11 @@ static void write_propval(FILE *f, struc
 	int i;
 

treesource.c static void write_propval(FILE *f, struc · line 207

Quoted 5 lines

treesource.c +3 -1

 	if (len == 0) {
-		fprintf(f, ";\n");
+		if (annotate)
+			fprintf(f, "; /* %s:%d */\n",
+				prop->src.name, prop->src.lineno);

So, as a bonus, if you use struct srcpos, you can use the srcpos_string() function here, which will format it nicely, and even handle cases where the property spans several line in the source. And it will include column numbers, so it will even give you useful information if someone is silly enough to put multiple properties on the same line.

Quoted 60 lines

treesource.c +19 -4

+		else
+			fprintf(f, ";\n");
 		return;
 	}
 

@@ -230,7 +234,10 @@ static void write_propval(FILE *f, struc
 		write_propval_bytes(f, prop->val);
 	}
 
-	fprintf(f, ";\n");
+	if (annotate)
+		fprintf(f, "; /* %s:%d */\n", prop->src.name, prop->src.lineno);
+	else
+		fprintf(f, ";\n");
 }
 
 static void write_tree_source_node(FILE *f, struct node *tree, int level)

@@ -242,10 +249,16 @@ static void write_tree_source_node(FILE
 	write_prefix(f, level);
 	for_each_label(tree->labels, l)
 		fprintf(f, "%s: ", l->label);
+
 	if (tree->name && (*tree->name))
-		fprintf(f, "%s {\n", tree->name);
+		fprintf(f, "%s {", tree->name);
 	else
-		fprintf(f, "/ {\n");
+		fprintf(f, "/ {");
+	if (annotate) {
+		fprintf(f, " /* %s:%d */\n",
+			tree->begin_src.name, tree->begin_src.lineno);
+	} else
+		fprintf(f, "\n");
 
 	for_each_property(tree, prop) {
 		write_prefix(f, level+1);

@@ -259,7 +272,11 @@ static void write_tree_source_node(FILE
 		write_tree_source_node(f, child, level+1);
 	}
 	write_prefix(f, level);
-	fprintf(f, "};\n");
+	if (annotate)
+		fprintf(f, "}; /* %s:%d */\n",
+			tree->end_src.name, tree->end_src.lineno);
+	else
+		fprintf(f, "};\n");
 }
 
 

Index: b/dtc.c
===================================================================

dtc.c +1 -0

@@ -29,6 +29,7 @@ int reservenum;		/* Number of memory res
 int minsize;		/* Minimum blob size */
 int padsize;		/* Additional padding to blob */
 int phandle_format = PHANDLE_BOTH;	/* Use linux,phandle or phandle properties */
+bool annotate = false;	/* annotate .dts with input source location */
 

dtc.c static struct option const usage_long_op · line 75

Quoted 7 lines

dtc.c +1 -0

 static void fill_fullpaths(struct node *tree, const char *prefix)
 {

@@ -71,6 +72,7 @@ static struct option const usage_long_op
 	{"error",             a_argument, NULL, 'E'},
 	{"help",             no_argument, NULL, 'h'},
 	{"version",          no_argument, NULL, 'v'},
+	{"annotate",         no_argument, NULL, 'a'},

I'm slightly dubious about the short form name here, since -a means "--all" in so many programs.

Quoted 101 lines

dtc.c +7 -0

 	{NULL,               no_argument, NULL, 0x0},
 };
 static const char * const usage_opts_help[] = {

@@ -101,6 +103,7 @@ static const char * const usage_opts_hel
 	"\n\tEnable/disable errors (prefix with \"no-\")",
 	"\n\tPrint this help and exit",
 	"\n\tPrint version and exit",
+	"\n\tAnnotate output .dts with input source file and line",
 	NULL,
 };
 

@@ -125,6 +128,9 @@ int main(int argc, char *argv[])
 
 	while ((opt = util_getopt_long()) != EOF) {
 		switch (opt) {
+		case 'a':
+			annotate = true;
+			break;
 		case 'I':
 			inform = optarg;
 			break;

@@ -213,6 +219,9 @@ int main(int argc, char *argv[])
 		fprintf(depfile, "%s:", outname);
 	}
 
+	if (annotate && (!streq(inform, "dts") || !streq(outform, "dts")))
+		die("--annotate requires -I dts -O dts\n");
+
 	if (streq(inform, "dts"))
 		bi = dt_from_source(arg);
 	else if (streq(inform, "fs"))

Index: b/dtc-parser.y
===================================================================

dtc-parser.y +12 -2

@@ -48,6 +48,7 @@ extern bool treesource_error;
 
 	struct property *prop;
 	struct property *proplist;
+	struct src *src;
 	struct node *node;
 	struct node *nodelist;
 	struct reserve_info *re;

@@ -78,6 +79,7 @@ extern bool treesource_error;
 %type <prop> propdef
 %type <proplist> proplist
 
+%type <src> openbrace
 %type <node> devicetree
 %type <node> nodedef
 %type <node> subnode

@@ -177,12 +179,20 @@ devicetree:
 	;
 
 nodedef:
-	  '{' proplist subnodes '}' ';'
+	  openbrace proplist subnodes '}' ';'
 		{
-			$$ = build_node($2, $3);
+			$$ = build_node($1, $2, $3);
 		}
 	;
 
+openbrace:
+	  '{'
+		{
+			$$ = start_node();
+		}
+	;
+
+
 proplist:
 	  /* empty */
 		{

Index: b/flattree.c
===================================================================

flattree.c +1 -1

@@ -748,7 +748,7 @@ static struct node *unflatten_tree(struc
 	char *flatname;
 	uint32_t val;
 
-	node = build_node(NULL, NULL);
+	node = build_node(NULL, NULL, NULL);
 
 	flatname = flat_read_string(dtbuf);
 

Index: b/fstree.c
===================================================================

fstree.c +1 -1

@@ -34,7 +34,7 @@ static struct node *read_fstree(const ch
 	if (!d)
 		die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
 
-	tree = build_node(NULL, NULL);
+	tree = build_node(NULL, NULL, NULL);
 
 	while ((de = readdir(d)) != NULL) {
 		char *tmpname;

Quoted 2 lines · David Gibson

Quoted 1 line · Frank Rowand

From: Frank Rowand <frank.rowand-/[email protected]>

Quoted 8 lines

dtc.c static struct option const usage_long_op · line 75

Quoted 5 lines

dtc.c +1 -0

@@ -71,6 +72,7 @@ static struct option const usage_long_op
 	{"error",             a_argument, NULL, 'E'},
 	{"help",             no_argument, NULL, 'h'},
 	{"version",          no_argument, NULL, 'v'},
+	{"annotate",         no_argument, NULL, 'a'},

I'm slightly dubious about the short form name here, since -a means "--all" in so many programs.

OK. Would -A be good?

From: Frank Rowand <frank.rowand-/[email protected]>

Add dtc tests.

- dtc --annotate to create a .dts with annotations
- compile the annotated .dts
- compare the .dts created from include0.dts to the .dts created by first compiling include0.dts with annotations, then compiling the resulting .dts without --annotations to strip the annotation

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 tests/run_tests.sh |   10 ++++++++++
 1 file changed, 10 insertions(+)

Index: b/tests/run_tests.sh
===================================================================

tests/run_tests.sh +0 -0

     run_dtc_test -I dts -O dtb -o embedded_nul.test.dtb embedded_nul.dts
     run_dtc_test -I dts -O dtb -o embedded_nul_equiv.test.dtb embedded_nul_equiv.dts
     run_test dtbs_equal_ordered embedded_nul.test.dtb embedded_nul_equiv.test.dtb

Quoted 9 lines · Frank Rowand

From: Frank Rowand <frank.rowand-/[email protected]>

Add dtc tests.

- dtc --annotate to create a .dts with annotations
- compile the annotated .dts
- compare the .dts created from include0.dts to the .dts created by first compiling include0.dts with annotations, then compiling the resulting .dts without --annotations to strip the annotation

My brain hurts trying to follow that.

Quoted 13 lines

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 tests/run_tests.sh |   10 ++++++++++
 1 file changed, 10 insertions(+)

Index: b/tests/run_tests.sh
===================================================================

tests/run_tests.sh +0 -0

@@ -276,6 +276,16 @@ libfdt_tests () {
     run_dtc_test -I dts -O dtb -o sourceoutput.test.dts.test.dtb sourceoutput.test.dts
     run_test dtbs_equal_ordered sourceoutput.test.dtb sourceoutput.test.dts.test.dtb
 

tests/run_tests.sh libfdt_tests () { · line 280

Quoted 2 lines

tests/run_tests.sh +2 -0

+    # verify annotated .dts can be compiled
+    run_dtc_test --annotate -o sourceoutput.test.annotate.dts sourceoutput.dts

1) Looks like you forgot to git add sourceoutput.dts

2) All your generated files should be named *.test.dts, so that make clean will get rid of them.

tests/run_tests.sh libfdt_tests () { · line 287

Quoted 8 lines

tests/run_tests.sh +7 -0

+    run_dtc_test -o sourceoutput.test.annotate.dts.test.dts sourceoutput.test.annotate.dts
+
+    # verify annotated .dts can be stripped to match non-annotated
+    run_dtc_test -o includes.dts include0.dts
+    run_dtc_test --annotate -o includes.annotate.dts include0.dts
+    run_dtc_test -o includes.annotate_undo.dts includes.annotate.dts
+    run_wrap_test cmp includes.dts includes.annotate_undo.dts

So, this checks that annotate doesn't break the semantic parts of the tree, which is a good test.

But I was suggesting a canned example, including the annotations to check for regressions in the annotation generation itself.

Quoted 4 lines

tests/run_tests.sh +0 -0

     run_dtc_test -I dts -O dtb -o embedded_nul.test.dtb embedded_nul.dts
     run_dtc_test -I dts -O dtb -o embedded_nul_equiv.test.dtb embedded_nul_equiv.dts
     run_test dtbs_equal_ordered embedded_nul.test.dtb embedded_nul_equiv.test.dtb

Quoted 26 lines · David Gibson

Quoted 9 lines · Frank Rowand

From: Frank Rowand <frank.rowand-/[email protected]>

Add dtc tests.

- dtc --annotate to create a .dts with annotations
- compile the annotated .dts
- compare the .dts created from include0.dts to the .dts created by first compiling include0.dts with annotations, then compiling the resulting .dts without --annotations to strip the annotation

My brain hurts trying to follow that.

Quoted 13 lines

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 tests/run_tests.sh |   10 ++++++++++
 1 file changed, 10 insertions(+)

Index: b/tests/run_tests.sh
===================================================================

tests/run_tests.sh +0 -0

@@ -276,6 +276,16 @@ libfdt_tests () {
     run_dtc_test -I dts -O dtb -o sourceoutput.test.dts.test.dtb sourceoutput.test.dts
     run_test dtbs_equal_ordered sourceoutput.test.dtb sourceoutput.test.dts.test.dtb
 

Quoted 4 lines

tests/run_tests.sh libfdt_tests () { · line 280

Quoted 2 lines

tests/run_tests.sh +2 -0

+    # verify annotated .dts can be compiled
+    run_dtc_test --annotate -o sourceoutput.test.annotate.dts sourceoutput.dts

1) Looks like you forgot to git add sourceoutput.dts

sourceoutput.dts is an existing .dts that I used again. But it looks like a bad choice - I think I should just use include0.dts, as you suggested.

Quoted 2 lines

2) All your generated files should be named *.test.dts, so that make clean will get rid of them.

Will fix.

Quoted 11 lines

tests/run_tests.sh libfdt_tests () { · line 287

Quoted 7 lines

tests/run_tests.sh +7 -0

+    run_dtc_test -o sourceoutput.test.annotate.dts.test.dts sourceoutput.test.annotate.dts
+
+    # verify annotated .dts can be stripped to match non-annotated
+    run_dtc_test -o includes.dts include0.dts
+    run_dtc_test --annotate -o includes.annotate.dts include0.dts
+    run_dtc_test -o includes.annotate_undo.dts includes.annotate.dts
+    run_wrap_test cmp includes.dts includes.annotate_undo.dts

So, this checks that annotate doesn't break the semantic parts of the tree, which is a good test.

Quoted 2 lines

But I was suggesting a canned example, including the annotations to check for regressions in the annotation generation itself.

OK, I think I understand now. Add a test to make sure that the annotation is correct. This will be interesting because the source path in the annotation is an absolute path, including the location of the dtc git repository. The way that I strip off the location of the dtc git repository in my personal world is a bit ugly. I'll think about how to do this.

From: Frank Rowand <frank.rowand-/[email protected]>

Add a new temp file in the build directory arch/${arch}/boot/dts/ that contains the expanded device tree source with source file locations.

Requires a new version of the dtc compiler that understands the --annotate flag.

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

---
 scripts/Makefile.lib |    3 +++
 1 file changed, 3 insertions(+)

Index: b/scripts/Makefile.lib
===================================================================

scripts/Makefile.lib +3 -0

@@ -287,12 +287,15 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
 	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
 		-i $(dir $<) $(DTC_FLAGS) \
 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	$(objtree)/scripts/dtc/dtc --annotate -O dts -o $(dtc-annotate-tmp) \
+		 $(dtc-tmp) ; \
 	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
 
 $(obj)/%.dtb: $(src)/%.dts FORCE
 	$(call if_changed_dep,dtc)
 
 dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+dtc-annotate-tmp = $(subst $(comma),_,$(dot-target).annotate.dts.tmp)
 
 # Bzip2
 # ---------------------------------------------------------------------------

Quoted 5 lines · Frank Rowand

From: Frank Rowand <frank.rowand-/[email protected]>

Add a new temp file in the build directory arch/${arch}/boot/dts/ that contains the expanded device tree source with source file locations.

Quoted 4 lines

Requires a new version of the dtc compiler that understands the --annotate flag.

Not-signed-off-by Frank Rowand <frank.rowand-/[email protected]>

Bit weird having a patch against an entirely different project / tree in the same series, but the patch itself looks file.

Quoted 25 lines

---
 scripts/Makefile.lib |    3 +++
 1 file changed, 3 insertions(+)

Index: b/scripts/Makefile.lib
===================================================================

scripts/Makefile.lib +3 -0

@@ -287,12 +287,15 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
 	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
 		-i $(dir $<) $(DTC_FLAGS) \
 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	$(objtree)/scripts/dtc/dtc --annotate -O dts -o $(dtc-annotate-tmp) \
+		 $(dtc-tmp) ; \
 	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
 
 $(obj)/%.dtb: $(src)/%.dts FORCE
 	$(call if_changed_dep,dtc)
 
 dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+dtc-annotate-tmp = $(subst $(comma),_,$(dot-target).annotate.dts.tmp)
 
 # Bzip2
 # ---------------------------------------------------------------------------