Documentation: dt-bindings: Fix interrupt documentation file path
Subsystems (5)
PATCH 1/1 Documentation: dt-bindings: Fix interrupt documentation file path
Fix the incorrect interrupt documentation file path in binding docs.
Signed-off-by Andrew F. Davis <[email protected]>
--- Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- Documentation/devicetree/bindings/mfd/palmas.txt | 2 +- Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +1 -1
@@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts.
Documentation/devicetree/bindings/mfd/arizona.txt +1 -1
@@ -24,7 +24,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and the
Documentation/devicetree/bindings/mfd/palmas.txt +1 -1
@@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties:
Documentation/devicetree/bindings/sound/wm8994.txt +1 -1
@@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks.
Signature · 6 lines
1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Andrew F. Davis
Fix the incorrect interrupt documentation file path in binding docs.
Signed-off-by Andrew F. Davis <[email protected]>--- Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- Documentation/devicetree/bindings/mfd/palmas.txt | 2 +-
Acked-by Lee Jones <[email protected]>
Quoted 55 lines
Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +1
-1@@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts.Documentation/devicetree/bindings/mfd/arizona.txt +1
-1@@ -24,7 +24,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and theDocumentation/devicetree/bindings/mfd/palmas.txt +1
-1@@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties:Documentation/devicetree/bindings/sound/wm8994.txt +1
-1@@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks.
Signature · 8 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 3 lines · Andrew F. Davis
Fix the incorrect interrupt documentation file path in binding docs.
Signed-off-by Andrew F. Davis <[email protected]>
Ping? Still applies to v4.4-rc1.
Lee Jones
AppliedQuoted 9 lines · Andrew F. Davis
Fix the incorrect interrupt documentation file path in binding docs.
Signed-off-by Andrew F. Davis <[email protected]>--- Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- Documentation/devicetree/bindings/mfd/palmas.txt | 2 +- Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Applied, thanks.
Quoted 52 lines
Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +1
-1@@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts.Documentation/devicetree/bindings/mfd/arizona.txt +1
-1@@ -24,7 +24,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and theDocumentation/devicetree/bindings/mfd/palmas.txt +1
-1@@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties:Documentation/devicetree/bindings/sound/wm8994.txt +1
-1@@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks.
Signature · 8 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html