Skip to contentSkip to conversation

Please pull u-boot-imx

GIT PULL Stefano Babic 2 participants 2 messages Sep 24, 2015

lore
Share & tools
lore
#0 lore raw

Hi Tom,

please pull from u-boot-imx, thanks !

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f697c2acca9ff02c9b0cf480a4a726ed9626a53a:

imx: fix coding style (2015-09-24 11:32:38 +0200)

----------------------------------------------------------------
Fabio Estevam (9):
mx6sabre_common: Add Fastboot support
mx7dsabresd: Staticize when possible
mx7dsabreasd: Remove dead code
mx7dsabresd: Include USB header
mx7dsabresd: Remove get_board_rev()
mx7dsabresd: Remove unused config option
mx6ul_14x14_evk: Remove dead code
mx6ul_14x14_evk: Staticize when possible
mx6ul_14x14_evk: Remove get_board_rev()

Heiko Schocher (1):
imx6, aristaintetos2: add me as maintainer

Otavio Salvador (3):
cgtqmx6eval: Fit into a single line
cgtqmx6eval: Add a maintainer entry
cgtqmx6eval: Add USB Mass Storage support

Peng Fan (12):
imx-common: fix iomux settings
imx: wdog: correct wcr register settings
imx: mx7dsabresd set wdog SRS bit
imx: mx7: drop select CPU_V7 for board target
imx: mx7dsabresd: drop SYS_SOC from board Kconfig
mtd: nand: mxs check maximum ecc that platfrom supports
imx-common: consider mux_ctrl_ofs when setting mux_mode
imx: boards: Add maintainers info
imx: mx7: discard unused global variable
imx-common: wrap boot_mode_apply with CONFIG_CMD_BMODE
imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE
imx: fix coding style

 arch/arm/cpu/armv7/mx7/Kconfig                    |  1 -
 arch/arm/cpu/armv7/mx7/soc.c                      |  4 +---
 arch/arm/imx-common/init.c                        |  5 +++--
 arch/arm/imx-common/iomux-v3.c                    |  6 ++----
 board/aristainetos/MAINTAINERS                    |  1 +
 board/congatec/cgtqmx6eval/MAINTAINERS            |  4 ++--
 board/congatec/cgtqmx6eval/cgtqmx6eval.c          |  3 +--
 board/freescale/mx6qsabreauto/MAINTAINERS         |  2 ++
 board/freescale/mx6slevk/MAINTAINERS              |  2 ++
 board/freescale/mx6ul_14x14_evk/MAINTAINERS       |  1 +
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 52
++--------------------------------------------------
 board/freescale/mx7dsabresd/Kconfig               |  3 ---
 board/freescale/mx7dsabresd/mx7dsabresd.c         | 74
+++++++++++++-------------------------------------------------------------
 drivers/mtd/nand/mxs_nand.c                       |  9 ++++++++-
 drivers/watchdog/imx_watchdog.c                   |  3 ++-
 include/configs/cgtqmx6eval.h                     | 14 ++++++++++++++
 include/configs/mx6sabre_common.h                 |  6 ++++++
 include/configs/mx7dsabresd.h                     |  3 ---
 18 files changed, 60 insertions(+), 133 deletions(-)
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#1 lore raw
Quoted 10 lines · Stefano Babic

Hi Tom,

please pull from u-boot-imx, thanks !

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f697c2acca9ff02c9b0cf480a4a726ed9626a53a:

imx: fix coding style (2015-09-24 11:32:38 +0200)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150924/a273a0b1/attachment.sig>