brcmfmac: firmware refresh for BCM43602 PCIE devices
PATCH 1/1 brcmfmac: firmware refresh for BCM43602 PCIE devices
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=100201
---
This patch fixes a couple of issues mentioned in kernel bugzilla #100201 with 2015 MacBook Pro machines using this wifi chipset.
The patch applies to master branch of the linux-firmware repository on top of commit f88e5c2e2ff5 ("Merge 'c11384c' ofgit://people.freedesktop.org/~vivijim/linux-firmware...").
Regards,
Arend
--- brcm/brcmfmac43602-pcie.ap.bin | Bin 588940 -> 595472 bytes brcm/brcmfmac43602-pcie.bin | Bin 590544 -> 634267 bytes 2 files changed, 0 insertions(+), 0 deletions(-)
rewrite brcm/brcmfmac43602-pcie.ap.bin (71%)
rewrite brcm/brcmfmac43602-pcie.bin (68%)
brcm/brcmfmac43602-pcie.ap.bin binary +0 -0
brcm/brcmfmac43602-pcie.bin binary +0 -0
Signature · 1 line
1.9.1
Quoted 7 lines · Arend van Spriel
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
Are there version numbers we could update in WHENCE to make this easier to track?
regards, --jkkm
Quoted 13 lines
[1] https://bugzilla.kernel.org/show_bug.cgi?id=100201
Cc Rafal Milecki <[email protected]>Tested-by Knuth Posern <[email protected]>Reviewed-by Pieter-Paul Giesberts <[email protected]>Signed-off-by Arend van Spriel <[email protected]>---
This patch fixes a couple of issues mentioned in kernel bugzilla #100201 with 2015 MacBook Pro machines using this wifi chipset.The patch applies to master branch of the linux-firmware repository on top of commit
f88e5c2e2ff5("Merge 'c11384c' ofgit://people.freedesktop.org/~vivijim/linux-firmware...").
Quoted 11 lines · Kyle McMartin
Quoted 7 lines · Arend van Spriel
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
Are there version numbers we could update in WHENCE to make this easier to track?
For brcmfmac firmware we don't have version numbers in WHENCE. To be honest it feels a bit redundant as the firmware file itself contains the version number, ie. by doing 'hexdump -C /firmware/ | tail -30'.
Regards,
Arend
Quoted 20 lines
regards, --jkkm
Quoted 6 lines
[1] https://bugzilla.kernel.org/show_bug.cgi?id=100201
Cc Rafal Milecki <[email protected]>Tested-by Knuth Posern <[email protected]>Reviewed-by Pieter-Paul Giesberts <[email protected]>Signed-off-by Arend van Spriel <[email protected]>Quoted 7 lines
---
This patch fixes a couple of issues mentioned in kernel bugzilla #100201 with 2015 MacBook Pro machines using this wifi chipset.The patch applies to master branch of the linux-firmware repository on top of commit
f88e5c2e2ff5("Merge 'c11384c' ofgit://people.freedesktop.org/~vivijim/linux-firmware...").--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 11 lines · Kyle McMartin
Quoted 7 lines · Arend van Spriel
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
Are there version numbers we could update in WHENCE to make this easier to track?
Hi Kyle,
For brcmfmac firmware we do not have version numbers in the WHENCE file. The firmware file itself contains the version number which can be shown using hexdump. I can make a note of that fact in the WHENCE file if needed.
Regards,
Arend
Quoted 15 lines
regards, --jkkm
Quoted 13 lines
[1] https://bugzilla.kernel.org/show_bug.cgi?id=100201
Cc Rafal Milecki <[email protected]>Tested-by Knuth Posern <[email protected]>Reviewed-by Pieter-Paul Giesberts <[email protected]>Signed-off-by Arend van Spriel <[email protected]>---
This patch fixes a couple of issues mentioned in kernel bugzilla #100201 with 2015 MacBook Pro machines using this wifi chipset.The patch applies to master branch of the linux-firmware repository on top of commit
f88e5c2e2ff5("Merge 'c11384c' ofgit://people.freedesktop.org/~vivijim/linux-firmware...").
Quoted 10 lines · Arend van Spriel
Quoted 9 lines · Kyle McMartin
Quoted 7 lines · Arend van Spriel
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
Quoted 9 lines
Quoted 2 lines
Are there version numbers we could update in WHENCE to make this easier to track?
Hi Kyle,
For brcmfmac firmware we do not have version numbers in the WHENCE file. The firmware file itself contains the version number which can be shown using hexdump. I can make a note of that fact in the WHENCE file if needed.
Sorry, I meant to apply this a few days ago, but I finally pushed it out. Thanks for your patience.
regards, --Kyle
Quoted 16 lines · Kyle McMartin
Quoted 15 lines · Arend van Spriel
Quoted 11 lines · Kyle McMartin
Quoted 7 lines · Arend van Spriel
A number of end-users reported issues with BCM43602 on the 2015 MacBook Pro. It turned out the previously released firmware did not properly support that device [1]. Hence an update of the STA firmware and while at it refresh the AP firmware as well. The latter has been tested using Netgear R8000. The STA firmware has been tested on MacBook Pro.
Are there version numbers we could update in WHENCE to make this easier to track?
Hi Kyle,
Quoted 7 lines
Quoted 4 lines
For brcmfmac firmware we do not have version numbers in the WHENCE file. The firmware file itself contains the version number which can be shown using hexdump. I can make a note of that fact in the WHENCE file if needed.
Sorry, I meant to apply this a few days ago, but I finally pushed it out. Thanks for your patience.
No problem.
Thanks,
Arend
Quoted 6 lines
regards, --Kyle
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html