Skip to contentSkip to conversation

Revert "ARM: dts: sun8i: Add new sun8i-a33-q8-tzx-723q4.dts file"

PATCH New Hans de Goede 2 participants 6 messages Sep 24, 2015 – Sep 28, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 Revert "ARM: dts: sun8i: Add new sun8i-a33-q8-tzx-723q4.dts file"

The tzx-723q[a]4 board variant of A33 based Q8 formfactor tablets was given its own dts file because the mmc would not work with a drive strength of 30mA, Android seemed to be using a lower drive-strength and doing the same with the upstream kernel seemed to fix this issue.

While working on a similar fix for u-boot I noticed that Android did not use a lower drive strength for mmc0, but for mmc1, so mmc0 should work fine with a drive strength of 30mA.

Further investigation has shown that Allwinner is using slightly tweaked clock sample phase settings in newer Android kernels, and that updating the mainstream sunxi mmc driver to these settings fixes this.

With this fixed we no longer need a dts file specifically for these pcb varants -> drop this dts file.

This reverts commit fb61c559a810f1487892b83d2d0606af1d020318.

---
 arch/arm/boot/dts/Makefile                   |  1 -
 arch/arm/boot/dts/sun8i-a33-q8-tzx-723q4.dts | 70 ----------------------------
 2 files changed, 71 deletions(-)
 delete mode 100644 arch/arm/boot/dts/sun8i-a33-q8-tzx-723q4.dts
arch/arm/boot/dts/Makefile +0 -1
index df8e0b3..d3982e7 100644
@@ -637,7 +637,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-q8-tzx-723q4.dtb \
 	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
arch/arm/boot/dts/sun8i-a33-q8-tzx-723q4.dts deleted +0 -70

70 lines not on this page · raw message

Signature · 1 line
2.5.0
#1 lore raw

PATCH 2/3 ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file

This is a generic dts file for A33 based q8 formfactor tablets, this is intended to replace both sun8i-a33-ippo-q8h-v1.2.dts and sun8i-a33-et-q8-v1.6.dts (these can be fully dropped after a transition period).

---
 arch/arm/boot/dts/Makefile                |  1 +
 arch/arm/boot/dts/sun8i-a33-q8-tablet.dts | 65 +++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
arch/arm/boot/dts/Makefile +1 -0
index d3982e7..1cb254b 100644
@@ -637,6 +637,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
arch/arm/boot/dts/sun8i-a33-q8-tablet.dts new file +65 -0

65 lines not on this page · raw message

Signature · 1 line
2.5.0
#2 lore raw

PATCH 2/3 ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file

Quoted 6 lines · Hans de Goede

This is a generic dts file for A33 based q8 formfactor tablets, this is intended to replace both sun8i-a33-ippo-q8h-v1.2.dts and sun8i-a33-et-q8-v1.6.dts (these can be fully dropped after a transition period).

Applied, together with patch 3.

Thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150928/b3b72c9f/attachment.sig>
#3 lore raw

PATCH 3/3 ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts

In reply to Hans de Goede

A33 Q8 tablets with the ippo-q8h-v1.2 pcb will work fine with the generic q8-tablet.dts and given the many variants of PCBs found in Q8 tablets using such a specific dts name was a mistake in hindsight.

We cannot just drop the ippo-q8h-v1.2.dtb as existing u-boot configs may very well point to it.

---
The plan is to remove the matching u-boot config after v2015.10 (which will ship with a generic q8_a33_tablet_defconfig file), and then once the next u-boot has shipped for a bit we can consider removing the symlink and Makefile entry for this.

---
 arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts | 66 +--------------------------
 1 file changed, 1 insertion(+), 65 deletions(-)
 mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts deleted +0 -65
deleted file mode 100644
index b8439cb..0000000
@@ -1,65 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <[email protected]>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sun8i-q8-common.dtsi"
-
-/ {
-	model = "Ippo Q8H Quad Core Tablet (v1.2)";
-	compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts new file +1 -0
new file mode 120000
index 0000000..4519fd7
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
Signature · 1 line
2.5.0
#4 lore raw

PATCH 1/3 Revert "ARM: dts: sun8i: Add new sun8i-a33-q8-tzx-723q4.dts file"

In reply to Hans de Goede
Quoted 9 lines · Hans de Goede

The tzx-723q[a]4 board variant of A33 based Q8 formfactor tablets was given its own dts file because the mmc would not work with a drive strength of 30mA, Android seemed to be using a lower drive-strength and doing the same with the upstream kernel seemed to fix this issue.

While working on a similar fix for u-boot I noticed that Android did not use a lower drive strength for mmc0, but for mmc1, so mmc0 should work fine with a drive strength of 30mA.

Quoted 7 lines

Further investigation has shown that Allwinner is using slightly tweaked clock sample phase settings in newer Android kernels, and that updating the mainstream sunxi mmc driver to these settings fixes this.

With this fixed we no longer need a dts file specifically for these pcb varants -> drop this dts file.

I dropped the patch.

Quoted 1 line

This reverts commit fb61c559a810f1487892b83d2d0606af1d020318.

Checkpatch prints an error about this one. Make sure you have the right commit format.

Thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150925/02333d50/attachment.sig>
#5 lore raw

Hi,

Quoted 18 lines · Maxime Ripard
Quoted 9 lines · Hans de Goede

The tzx-723q[a]4 board variant of A33 based Q8 formfactor tablets was given its own dts file because the mmc would not work with a drive strength of 30mA, Android seemed to be using a lower drive-strength and doing the same with the upstream kernel seemed to fix this issue.

While working on a similar fix for u-boot I noticed that Android did not use a lower drive strength for mmc0, but for mmc1, so mmc0 should work fine with a drive strength of 30mA.

Quoted 7 lines

Further investigation has shown that Allwinner is using slightly tweaked clock sample phase settings in newer Android kernels, and that updating the mainstream sunxi mmc driver to these settings fixes this.

With this fixed we no longer need a dts file specifically for these pcb varants -> drop this dts file.

Quoted 6 lines

I dropped the patch.

Quoted 1 line

This reverts commit fb61c559a810f1487892b83d2d0606af1d020318.

Checkpatch prints an error about this one. Make sure you have the right commit format.

<sigh> going off-topic here (very much so), but that line is actually auto-generated by "git revert" it would be nice if the git and checkpatch people got get together and agree on a common format here.

Regards,

Hans