Kconfig and ti omap configs tidy up
cover Kconfig and ti omap configs tidy up
The patch set is aimed to transferring several config options from the old config.h configuration style to the new Kconfig framework and also move some of the existing (in Kconfig) ones from config.h style to the defconfig style in the ti-omap land.
It is based on the 7d31c6a (Merge git://git.denx.de/u-boot-pxa) commit upstream.
Igor Grinberg (10):
configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
Kconfig: fix typo in CONFIG_FIT description
Kconfig: add CONFIG_BOOTDELAY
Kconfig: add CONFIG_CMD_BOOTZ
ti: omap3: config: remove 1 from boolean define
ti: omap/am: move CONFIG_HUSH_PARSER to defconfig
ti: omap/am: move CONFIG_CMD_BOOTZ to defconfig
ti: omap/am: move CONFIG_CMD_NAND to defconfig
ti: omap/am: move CONFIG_CMD_I2C to defconfig
ti: omap/am: move CONFIG_BOOTDELAY to defconfig
Kconfig | 2 +- common/Kconfig | 23 +++++++++++++++++++++++ configs/am335x_baltos_defconfig | 6 ++++++ configs/am335x_evm_defconfig | 6 ++++++ configs/am335x_evm_nor_defconfig | 6 ++++++ configs/am335x_evm_norboot_defconfig | 5 +++++ configs/am335x_evm_spiboot_defconfig | 5 +++++ configs/am335x_evm_usbspl_defconfig | 6 ++++++ configs/am335x_gp_evm_defconfig | 4 ++++ configs/am335x_igep0033_defconfig | 6 ++++++ configs/am43xx_evm_defconfig | 6 ++++++ configs/am43xx_evm_ethboot_defconfig | 6 ++++++ configs/am43xx_evm_qspiboot_defconfig | 5 +++++ configs/am43xx_evm_usbhost_boot_defconfig | 6 ++++++ configs/beagle_x15_defconfig | 5 +++++ configs/birdland_bav335a_defconfig | 5 +++++ configs/birdland_bav335b_defconfig | 5 +++++ configs/cairo_defconfig | 6 ++++++ configs/cm_t335_defconfig | 6 ++++++ configs/cm_t35_defconfig | 8 +++++++- configs/cm_t43_defconfig | 8 +++++++- configs/cm_t54_defconfig | 5 +++++ configs/devkit8000_defconfig | 5 +++++ configs/dra72_evm_defconfig | 5 +++++ configs/dra7xx_evm_defconfig | 5 +++++ configs/dra7xx_evm_qspiboot_defconfig | 5 +++++ configs/dra7xx_evm_uart3_defconfig | 5 +++++ configs/draco_defconfig | 1 + configs/duovero_defconfig | 5 +++++ configs/igep0020_defconfig | 5 +++++ configs/igep0020_nand_defconfig | 6 ++++++ configs/igep0030_defconfig | 5 +++++ configs/igep0030_nand_defconfig | 6 ++++++ configs/igep0032_defconfig | 5 +++++ configs/k2e_evm_defconfig | 7 ++++++- configs/k2hk_evm_defconfig | 7 ++++++- configs/k2l_evm_defconfig | 7 ++++++- configs/omap3_beagle_defconfig | 6 ++++++ configs/omap3_overo_defconfig | 6 ++++++ configs/omap3_pandora_defconfig | 6 ++++++ configs/omap3_zoom1_defconfig | 6 ++++++ configs/omap4_panda_defconfig | 5 +++++ configs/omap4_sdp4430_defconfig | 5 +++++ configs/omap5_uevm_defconfig | 5 +++++ configs/pcm051_rev1_defconfig | 5 +++++ configs/pcm051_rev3_defconfig | 5 +++++ configs/pengwyn_defconfig | 6 ++++++ configs/pepper_defconfig | 5 +++++ configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + include/config_distro_defaults.h | 6 ++++++ include/configs/PMC440.h | 1 - include/configs/alpr.h | 1 - include/configs/cm_t35.h | 6 ------ include/configs/cm_t3517.h | 1 - include/configs/cm_t43.h | 1 - include/configs/cm_t54.h | 3 --- include/configs/devkit8000.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_cairo.h | 4 ---- include/configs/omap3_logic.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/spear-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/ti_armv7_common.h | 8 -------- include/configs/ti_armv7_omap.h | 1 - include/configs/ti_omap3_common.h | 2 +- include/configs/xpedite517x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - 72 files changed, 284 insertions(+), 42 deletions(-)
Signature · 1 line
2.4.6
PATCH 1/10 configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
The config option has been removed by one of the syncs with the Linux mainline MTD subsystem:ff94bc40af (mtd, ubi, ubifs: resync with Linux-3.14)
It has been left inside the config files. Currently does not look to serve any purpose, so remove it now from all the configs.
--- include/configs/PMC440.h | 1 - include/configs/alpr.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cm_t3517.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_cairo.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/spear-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - 13 files changed, 13 deletions(-)
include/configs/PMC440.h +0 -1
@@ -406,7 +406,6 @@#define CONFIG_SYS_MAX_NAND_DEVICE 1#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)#define CONFIG_SYS_NAND_SELECT_DEVICE 1/* nand driver supports mutipl. chips */ -#define CONFIG_SYS_NAND_QUIET_TEST 1#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */
include/configs/alpr.h +0 -1
@@ -316,7 +316,6 @@#define CONFIG_SYS_NAND_BASE 0xF0000000/* NAND FLASH Base Address */ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \ CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 } -#define CONFIG_SYS_NAND_QUIET_TEST 1/* don't warn upon unknown NAND flash */ #define CONFIG_SYS_NAND_MAX_OOBFREE 2#define CONFIG_SYS_NAND_MAX_ECCPOS 56
include/configs/cm_t35.h +0 -1
@@ -147,7 +147,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */
include/configs/cm_t3517.h +0 -1
@@ -152,7 +152,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */
include/configs/omap3_beagle.h +0 -1
@@ -121,7 +121,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST 1#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND */ /* devices */
include/configs/omap3_cairo.h +0 -1
@@ -70,7 +70,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST 1#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND */ /* devices */
include/configs/omap3_logic.h +0 -1
@@ -125,7 +125,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */
include/configs/omap3_overo.h +0 -1
@@ -88,7 +88,6 @@#endif /* CONFIG_NAND */ /* Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */ /* Environment information */
include/configs/spear-common.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_NAND_FSMC #define CONFIG_SYS_MAX_NAND_DEVICE 1#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_QUIET_TEST /* * Command support defines
include/configs/tao3530.h +0 -1
@@ -126,7 +126,6 @@/* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE/* physical address */ /* to access nand */
include/configs/xpedite517x.h +0 -1
@@ -138,7 +138,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_NAND_ACTL_CLE (1 << 15)/* C_LA15 */ #define CONFIG_SYS_NAND_ACTL_NCE 0/* NCE not controlled by ADDR */ #define CONFIG_SYS_NAND_ACTL_DELAY 25 -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_JFFS2_NAND /*
include/configs/xpedite537x.h +0 -1
@@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2}#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC /*
include/configs/xpedite550x.h +0 -1
@@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2}#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC /*
Signature · 1 line
2.4.6
PATCH 1/10 configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
Quoted 6 lines · Igor Grinberg
The config option has been removed by one of the syncs with the Linux mainline MTD subsystem:
ff94bc40af(mtd, ubi, ubifs: resync with Linux-3.14)
It has been left inside the config files. Currently does not look to serve any purpose, so remove it now from all the configs.
Quoted 9 lines
Signed-off-by Igor Grinberg <[email protected]>Cc Matthias Fuchs <[email protected]>Cc Stefan Roese <[email protected]>Cc "Albert ARIBAUD (3ADEV)" <[email protected]>Cc Peter Barada <[email protected]>Cc Steve Sakoman <[email protected]>Cc Peter Tyser <[email protected]>Cc Joe Hershberger <[email protected]>Cc Simon Glass <[email protected]>
Thanks,
Stefan
PATCH 1/10 configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
In reply to Igor GrinbergQuoted 6 lines · Igor Grinberg
The config option has been removed by one of the syncs with the Linux mainline MTD subsystem:
ff94bc40af(mtd, ubi, ubifs: resync with Linux-3.14)
It has been left inside the config files. Currently does not look to serve any purpose, so remove it now from all the configs.
Quoted 10 lines
Signed-off-by Igor Grinberg <[email protected]>Cc Matthias Fuchs <[email protected]>Cc Stefan Roese <[email protected]>Cc "Albert ARIBAUD (3ADEV)" <[email protected]>Cc Peter Barada <[email protected]>Cc Steve Sakoman <[email protected]>Cc Peter Tyser <[email protected]>Cc Joe Hershberger <[email protected]>Cc Simon Glass <[email protected]>Acked-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150928/5f8ec478/attachment.sig>
PATCH 2/10 Kconfig: fix typo in CONFIG_FIT description
In reply to Igor GrinbergFix typo in CONFIG_FIT description - remove the accidentially added redundand 'the'.
--- Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Kconfig +1 -1
@@ -146,7 +146,7 @@ config FIT Flattened Image Tree. FIT is formally a FDT, which can include images of various types (kernel, FDT blob, ramdisk, etc.) in a single blob. To boot this new uImage structure, - pass the the address of the blob to the "bootm" command. + pass the address of the blob to the "bootm" command. config FIT_VERBOSE bool "Display verbose messages on FIT boot"
Signature · 1 line
2.4.6
PATCH 2/10 Kconfig: fix typo in CONFIG_FIT description
Quoted 9 lines · Igor Grinberg
Fix typo in
CONFIG_FITdescription - remove the accidentially added redundand 'the'.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>--- Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH 2/10 Kconfig: fix typo in CONFIG_FIT description
In reply to Igor GrinbergQuoted 7 lines · Igor Grinberg
Fix typo in
CONFIG_FITdescription - remove the accidentially added redundand 'the'.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150928/901ce840/attachment.sig>
PATCH 3/10 Kconfig: add CONFIG_BOOTDELAY
In reply to Igor GrinbergAdd CONFIG_BOOTDELAY to the Kconfig.
To make the transition easier, we define CONFIG_AUTOBOOT_BOOTDELAY to actually enable the CONFIG_BOOTDELAY Kconfig setting.
Once all boards finish transitioning to Kconfig, we can remove the CONFIG_AUTOBOOT_BOOTDELAY and just leave the CONFIG_BOOTDELAY unguarded.
--- common/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
common/Kconfig +17 -0
@@ -100,6 +100,23 @@ config AUTOBOOT_STOP_STR_SHA256 string / password matches a values that is encypted via a SHA256 hash and saved in the environment. +config AUTOBOOT_BOOTDELAY + bool "Enable specifying the boot delay" + help + This option enables specifying the delay time (in seconds) + before automatically booting the default image. + +config BOOTDELAY + int "Seconds to delay before autobooting" + depends on AUTOBOOT_BOOTDELAY + default 1 + help + Delay before automatically booting the default image; + set to -1 to disable autoboot. + set to -2 to autoboot with no delay and not check for abort + (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). + See doc/README.autoboot for additional information. + endmenu comment "Commands"
Signature · 1 line
2.4.6
PATCH 3/10 Kconfig: add CONFIG_BOOTDELAY
Hi Igor,
Quoted 31 lines · Igor Grinberg
Add
CONFIG_BOOTDELAYto theKconfig.
To make the transition easier, we defineCONFIG_AUTOBOOT_BOOTDELAYto actually enable theCONFIG_BOOTDELAYKconfigsetting.
Once all boards finish transitioning toKconfig, we can remove theCONFIG_AUTOBOOT_BOOTDELAYand just leave theCONFIG_BOOTDELAYunguarded.Signed-off-by Igor Grinberg <[email protected]>Cc Simon Glass <[email protected]>Cc Masahiro Yamada <[email protected]>--- common/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)common/Kconfig +10
-0@@ -100,6 +100,23 @@ config AUTOBOOT_STOP_STR_SHA256 string / password matches a values that is encypted via a SHA256 hash and saved in the environment. +config AUTOBOOT_BOOTDELAY + bool "Enable specifying the boot delay" + help + This option enables specifying the delay time (in seconds) + before automatically booting the default image. + +config BOOTDELAY + int "Seconds to delay before autobooting" + depends on AUTOBOOT_BOOTDELAY + default 1
common/Kconfig config AUTOBOOT_STOP_STR_SHA256 · line 122
Quoted 10 lines
common/Kconfig +7
-0+ help + Delay before automatically booting the default image; + set to -1 to disable autoboot. + set to -2 to autoboot with no delay and not check for abort + (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). + See doc/README.autoboot for additional information. + endmenu comment "Commands"
How about using the moveconfig tool to move all boards to Kconfig for the option you add?
Regards,
Simon
PATCH 4/10 Kconfig: add CONFIG_CMD_BOOTZ
In reply to Igor GrinbergAdd CONFIG_CMD_BOOTZ to the Kconfig.
Since the CONFIG_CMD_BOOTZ cannot live without the CONFIG_CMD_BOOTM, make it select the CONFIG_CMD_BOOTM.
--- common/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)
common/Kconfig +6 -0
@@ -165,6 +165,12 @@ config CMD_BOOTM help Boot an application image from the memory. +config CMD_BOOTZ + bool "bootz" + select CMD_BOOTM + help + Boot a Linux kernel zImage from the memory. + config CMD_GO bool "go" default y
Signature · 1 line
2.4.6
PATCH 4/10 Kconfig: add CONFIG_CMD_BOOTZ
ping.
Quoted 29 lines · Igor Grinberg
Add
CONFIG_CMD_BOOTZto theKconfig.
Since theCONFIG_CMD_BOOTZcannot live without theCONFIG_CMD_BOOTM, make it select theCONFIG_CMD_BOOTM.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>--- common/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)common/Kconfig +6
-0@@ -165,6 +165,12 @@ config CMD_BOOTM help Boot an application image from the memory. +config CMD_BOOTZ + bool "bootz" + select CMD_BOOTM + help + Boot a Linux kernel zImage from the memory. + config CMD_GO bool "go" default y
Signature · 2 lines
Regards, Igor.
PATCH 4/10 Kconfig: add CONFIG_CMD_BOOTZ
ping x2
Quoted 33 lines · Igor Grinberg
ping.
Quoted 29 lines · Igor Grinberg
Add
CONFIG_CMD_BOOTZto theKconfig.
Since theCONFIG_CMD_BOOTZcannot live without theCONFIG_CMD_BOOTM, make it select theCONFIG_CMD_BOOTM.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>--- common/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)common/Kconfig +6
-0@@ -165,6 +165,12 @@ config CMD_BOOTM help Boot an application image from the memory. +config CMD_BOOTZ + bool "bootz" + select CMD_BOOTM + help + Boot a Linux kernel zImage from the memory. + config CMD_GO bool "go" default y
Signature · 2 lines
Regards, Igor.
PATCH 4/10 Kconfig: add CONFIG_CMD_BOOTZ
Quoted 25 lines · Igor Grinberg
ping x2
Quoted 22 lines · Igor Grinberg
ping.
Quoted 19 lines · Igor Grinberg
Add
CONFIG_CMD_BOOTZto theKconfig.
Since theCONFIG_CMD_BOOTZcannot live without theCONFIG_CMD_BOOTM, make it select theCONFIG_CMD_BOOTM.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>--- common/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)common/Kconfig +0
-0@@ -165,6 +165,12 @@ config CMD_BOOTM help Boot an application image from the memory.
Quoted 9 lines
Quoted 9 lines
common/Kconfig config CMD_BOOTM · line 176
Quoted 9 lines
common/Kconfig +6
-0+config CMD_BOOTZ + bool "bootz" + select CMD_BOOTM + help + Boot a Linux kernel zImage from the memory. + config CMD_GO bool "go" default y
I figured you were tackling this later with moveconfig.py, no?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150929/6a522fa5/attachment.sig>
PATCH 4/10 Kconfig: add CONFIG_CMD_BOOTZ
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Quoted 26 lines · Tom Rini
Quoted 25 lines · Igor Grinberg
ping x2
Quoted 22 lines · Igor Grinberg
ping.
Quoted 19 lines · Igor Grinberg
Add
CONFIG_CMD_BOOTZto theKconfig.
Since theCONFIG_CMD_BOOTZcannot live without theCONFIG_CMD_BOOTM, make it select theCONFIG_CMD_BOOTM.Signed-off-by Igor Grinberg <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Simon Glass <[email protected]>--- common/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)common/Kconfig +0
-0@@ -165,6 +165,12 @@ config CMD_BOOTM help Boot an application image from the memory.
Quoted 11 lines
Quoted 9 lines
Quoted 9 lines
common/Kconfig config CMD_BOOTM · line 176
Quoted 9 lines
common/Kconfig +6
-0+config CMD_BOOTZ + bool "bootz" + select CMD_BOOTM + help + Boot a Linux kernel zImage from the memory. + config CMD_GO bool "go" default yI figured you were tackling this later with
moveconfig.py, no?
Aahh, yes that is true. Sorry about that.
- --
Regards,
Igor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAEBCAAGBQJWC5S1AAoJEBDE8YO64Efal6QQAI1/cg7ftNL0Kcyvkp7QMBKy +KyLmJZQ+dVLjATzXJWLScaSQp3AuHfJgvoEfPIALZMxZmyXPuAWroP/hoBgNJdA koo6Mk2x0ckMfqR4VVk0xF7peIUq528R9b+OVMrXCnum2RwOyz5+4IvWuVVmzUKa B4a+7YACjO74M33V+FhQLMP4NJwtmBA+2Jwb09kitR26uGV/nenYDxCtSVHClO2F 4vZWYMw36Ex0H2nZP3PY7U2mDIyEqBFuCgEgve/g0HIz0BIKbxP8viRq5zVQMLcg edJpn2/9eRKLfCBcDuZxMXqtx7Ox3fGK22OanhE3IGGvQk3EWu0zUWlmmnagb5Ja 8VwR2MwVCtQj+hCAY76dqcD9Dzv5iH/vygPvnHnwTjCEDXGH1FyVuI5emIWFqa8S RvYVQyB8qMImYAI60oFwrIeg5D848fIwhJ3Gon1ydkZCA/eWE1KDb0Q/V7OgWuZq rJGPWtGpJWezuUIelU4GoN0QLKhPnuhREpa3Bgtb1JvN72r0LMlVEq15GHSn3w1a IRlIGSMkajtRO2l9ljfi0L0FghLBfdcMCoW0bsKp3eEdux3WX3AQs4+26jfZVd4L E9uC5Si5YYdE3R4TSkjEYTVsVwDaSzzQdf3q6HqAfc62lD0fXFYYUMYnN0pHdH5b S0W0cgxgtCs3yTzXiQIE
=DhyG
-----END PGP SIGNATURE-----
PATCH 5/10 ti: omap3: config: remove 1 from boolean define
In reply to Igor GrinbergCONFIG_TWL4030_POWER is a boolean define variable. It is either defined or not defined and should not have a value assigned to it. Remove the value.
--- include/configs/ti_omap3_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/ti_omap3_common.h +1 -1
@@ -66,7 +66,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800
Signature · 1 line
2.4.6
PATCH 5/10 ti: omap3: config: remove 1 from boolean define
Hi Tom,
Quoted 5 lines · Igor Grinberg
CONFIG_TWL4030_POWERis a boolean define variable. It is either defined or not defined and should not have a value assigned to it. Remove the value.Signed-off-by Igor Grinberg <[email protected]>
I think this one can also be applied, no?
Quoted 18 lines
--- include/configs/ti_omap3_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/ti_omap3_common.h +1
-1@@ -66,7 +66,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800
Signature · 2 lines
Regards, Igor.
PATCH 5/10 ti: omap3: config: remove 1 from boolean define
ping
Quoted 30 lines · Igor Grinberg
Hi Tom,
Quoted 5 lines · Igor Grinberg
CONFIG_TWL4030_POWERis a boolean define variable. It is either defined or not defined and should not have a value assigned to it. Remove the value.Signed-off-by Igor Grinberg <[email protected]>I think this one can also be applied, no?
Quoted 18 lines
--- include/configs/ti_omap3_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/ti_omap3_common.h +1
-1@@ -66,7 +66,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800
Signature · 2 lines
Regards, Igor.
PATCH 5/10 ti: omap3: config: remove 1 from boolean define
Quoted 25 lines · Igor Grinberg
ping
Quoted 22 lines · Igor Grinberg
Hi Tom,
Quoted 5 lines · Igor Grinberg
CONFIG_TWL4030_POWERis a boolean define variable. It is either defined or not defined and should not have a value assigned to it. Remove the value.Signed-off-by Igor Grinberg <[email protected]>I think this one can also be applied, no?
Quoted 11 lines
--- include/configs/ti_omap3_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/ti_omap3_common.h +0
-0@@ -66,7 +66,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)
Quoted 6 lines
Quoted 6 lines
include/configs/ti_omap3_common.h line 72
Quoted 6 lines
include/configs/ti_omap3_common.h +1
-1/* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800
And I figured you just re-post this as part of v2 as it's trivially correct but also a tiny thing in a bigger series.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150929/b35fd2a4/attachment.sig>
PATCH 5/10 ti: omap3: config: remove 1 from boolean define
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Quoted 31 lines · Tom Rini
Quoted 29 lines · Igor Grinberg
ping
Quoted 26 lines · Igor Grinberg
Hi Tom,
Quoted 5 lines · Igor Grinberg
CONFIG_TWL4030_POWERis a boolean define variable. It is either defined or not defined and should not have a value assigned to it. Remove the value.Signed-off-by Igor Grinberg <[email protected]>I think this one can also be applied, no?
Quoted 15 lines
--- include/configs/ti_omap3_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/ti_omap3_common.h +1
-1@@ -66,7 +66,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
include/configs/ti_omap3_common.h line 72
Quoted 2 lines
include/configs/ti_omap3_common.h +0
-0/* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800Reviewed-by Tom Rini <[email protected]>And I figured you just re-post this as part of v2 as it's trivially correct but also a tiny thing in a bigger series.
Well, its relation is only by the affected file, so it will help me more (less things to carry for v2) if you can apply it already.
Thanks!
- --
Regards,
Igor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAEBCAAGBQJWC5U9AAoJEBDE8YO64EfaguIP/00wC4X6lL89yIlHpWM6qGZ9 p60KzPvbmfXoa86UyWNrmGBNKkP1i86ECNnRk8CRyzTWKt9f7o9RlceLWfqIYK0G wkAEk724G+FpYAqgTgkVB/BBF/mimm9JbjdoA5Tx58MDaK3bP5zKQ4J4a1mReZa9 fW/remBNgOtV++QGQBZMzPUWowAc4YQNZ9ZlXN0ZhSqoGprVQAsuQdJybfIIyF+i GSctjK77ObGpwf7NLS+ft8290f1eo/Jd+KMXFs7m3OHXo+yFvjq9FbET8DGYSy2N pANLDbxmd3Mgc1PA4XZNnGt6BJ04vNlFhWUW9I2+FZTMldegyblUSc1Fug5mWqWa DtxgE8YSlEjLbrrgEUlZ6zk6Xmfb5Nz9ndBiNUfduOt3YOUdnR5SJThF7bjq3UXz LN+fO6K1HK/EY8jc9qMb7Jme4hx1/pHcy4Vzx7Zh/9m4u9mZkRXJnqITxcS2+hhs H00v3XuhTfjNybgmrunvclPFlxvicb8P7BBTDKhmPzb2mV19g+AhrmmHjIbPhvVh QBMv0mkQsG+KYqD9ruj+OLT3xMQ99skipX3uUUY3z90u6RGMjRWKvlSrLSmr56SE AdmnZw6Al/WTLuvi66S3WE3jmjF0f5TKBPa6uIVLyxgdC9jDJZNA1iSDIAX9s5wZ LDwX8bcLf32c7BPKBe1/
=M25l
-----END PGP SIGNATURE-----
PATCH 6/10 ti: omap/am: move CONFIG_HUSH_PARSER to defconfig
In reply to Igor GrinbergMake more use of the Kconfig and move CONFIG_HUSH_PARSER config option to defconfigs for ti omap/am based boards.
--- configs/am335x_baltos_defconfig | 1 + configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_norboot_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_gp_evm_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/beagle_x15_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/cairo_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/cm_t35_defconfig | 3 ++- configs/cm_t43_defconfig | 3 ++- configs/cm_t54_defconfig | 1 + configs/devkit8000_defconfig | 1 + configs/dra72_evm_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_evm_qspiboot_defconfig | 1 + configs/dra7xx_evm_uart3_defconfig | 1 + configs/duovero_defconfig | 1 + configs/igep0020_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0030_defconfig | 1 + configs/igep0030_nand_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/k2e_evm_defconfig | 3 ++- configs/k2hk_evm_defconfig | 3 ++- configs/k2l_evm_defconfig | 3 ++- configs/omap3_beagle_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap3_pandora_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/omap4_panda_defconfig | 1 + configs/omap4_sdp4430_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + include/config_distro_defaults.h | 2 ++ include/configs/cm_t35.h | 1 - include/configs/ti_armv7_common.h | 1 - 48 files changed, 52 insertions(+), 7 deletions(-)
configs/am335x_baltos_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/am335x_evm_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am335x_evm_nor_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am335x_evm_norboot_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_NOR_BOOT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am335x_evm_usbspl_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am335x_gp_evm_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y CONFIG_RSA=y +CONFIG_HUSH_PARSER=y
configs/am335x_igep0033_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/am43xx_evm_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y +CONFIG_HUSH_PARSER=y
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am43xx_evm_qspiboot_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/beagle_x15_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/birdland_bav335a_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/birdland_bav335b_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/cairo_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set CONFIG_SYS_PROMPT="Cairo # " +CONFIG_HUSH_PARSER=y
configs/cm_t335_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="CM-T335 # " +CONFIG_HUSH_PARSER=y
configs/cm_t35_defconfig +2 -1
@@ -2,8 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_CM_T35=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="CM-T3x # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CM-T3x # "
configs/cm_t43_defconfig +2 -1
@@ -1,10 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_CM_T43=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_FLASH is not set # CONFIG_CMD_NFS is not set CONFIG_DM=y CONFIG_DM_GPIO=y
configs/cm_t54_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="CM-T54 # " +CONFIG_HUSH_PARSER=y
configs/devkit8000_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/dra72_evm_defconfig +1 -0
@@ -15,3 +15,4 @@ CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_DM_GPIO=y +CONFIG_HUSH_PARSER=y
configs/dra7xx_evm_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y +CONFIG_HUSH_PARSER=y
configs/dra7xx_evm_qspiboot_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/dra7xx_evm_uart3_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/duovero_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="duovero # " +CONFIG_HUSH_PARSER=y
configs/igep0020_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/igep0020_nand_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/igep0030_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/igep0030_nand_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/igep0032_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/k2e_evm_defconfig +2 -1
@@ -2,8 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="K2E EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2E EVM # "
configs/k2hk_evm_defconfig +2 -1
@@ -2,8 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="K2HK EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2HK EVM # "
configs/k2l_evm_defconfig +2 -1
@@ -2,8 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="K2L EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2L EVM # "
configs/omap3_beagle_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_HUSH_PARSER=y
configs/omap3_overo_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="Overo # " +CONFIG_HUSH_PARSER=y
configs/omap3_pandora_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_TARGET_OMAP3_PANDORA=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="Pandora # " +CONFIG_HUSH_PARSER=y
configs/omap3_zoom1_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_TARGET_OMAP3_ZOOM1=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/omap4_panda_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set +CONFIG_HUSH_PARSER=y
configs/omap4_sdp4430_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP44XX=y CONFIG_TARGET_OMAP4_SDP4430=y CONFIG_SPL=y +CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set
configs/omap5_uevm_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/pcm051_rev1_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV1" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/pcm051_rev3_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV3" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_HUSH_PARSER=y
configs/pengwyn_defconfig +1 -0
@@ -4,3 +4,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_HUSH_PARSER=y
configs/pepper_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="pepper# " +CONFIG_HUSH_PARSER=y
include/config_distro_defaults.h +2 -0
@@ -66,6 +66,8 @@#define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_SUPPORT_RAW_INITRD +#ifndef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_HUSH_PARSER +#endif #endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */
include/configs/cm_t35.h +0 -1
@@ -220,7 +220,6 @@#define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
include/configs/ti_armv7_common.h +0 -1
@@ -114,7 +114,6 @@#else #define CONFIG_SYS_MALLOC_LEN (16 << 20)#endif -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BAUDRATE 115200#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
Signature · 1 line
2.4.6
PATCH 7/10 ti: omap/am: move CONFIG_CMD_BOOTZ to defconfig
In reply to Igor GrinbergMake more use of the Kconfig and move CONFIG_CMD_BOOTZ config option to defconfigs for ti omap/am based boards.
--- configs/am335x_baltos_defconfig | 1 + configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_norboot_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/beagle_x15_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/cairo_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/cm_t54_defconfig | 1 + configs/dra72_evm_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_evm_qspiboot_defconfig | 1 + configs/dra7xx_evm_uart3_defconfig | 1 + configs/draco_defconfig | 1 + configs/duovero_defconfig | 1 + configs/igep0020_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0030_defconfig | 1 + configs/igep0030_nand_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap3_pandora_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/omap4_panda_defconfig | 1 + configs/omap4_sdp4430_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + include/config_distro_defaults.h | 2 ++ include/configs/cm_t35.h | 1 - include/configs/devkit8000.h | 1 - include/configs/ti_armv7_common.h | 1 - 52 files changed, 50 insertions(+), 3 deletions(-)
configs/am335x_baltos_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_evm_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_evm_nor_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_evm_norboot_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_NOR_BOOT=y # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_evm_usbspl_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am335x_igep0033_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am43xx_evm_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am43xx_evm_qspiboot_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/beagle_x15_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/birdland_bav335a_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/birdland_bav335b_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/cairo_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_NET is not set CONFIG_SYS_PROMPT="Cairo # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/cm_t335_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="CM-T335 # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/cm_t35_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_CM_T35=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T3x # " +CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set
configs/cm_t43_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_CMD_USB=y # CONFIG_CMD_NFS is not set CONFIG_DM=y CONFIG_DM_GPIO=y +CONFIG_CMD_BOOTZ=y
configs/cm_t54_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/dra72_evm_defconfig +1 -0
@@ -16,3 +16,4 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_DM_GPIO=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/dra7xx_evm_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/dra7xx_evm_qspiboot_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/dra7xx_evm_uart3_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/draco_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_BOOTZ=y
configs/duovero_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="duovero # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/igep0020_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/igep0020_nand_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/igep0030_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/igep0030_nand_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/igep0032_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/k2e_evm_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_PROMPT="K2E EVM # " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_CMD_BOOTZ=y
configs/k2hk_evm_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_PROMPT="K2HK EVM # " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_CMD_BOOTZ=y
configs/k2l_evm_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_PROMPT="K2L EVM # " # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_CMD_BOOTZ=y
configs/omap3_beagle_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/omap3_overo_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SPL=y # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="Overo # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/omap3_pandora_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_TARGET_OMAP3_PANDORA=y # CONFIG_CMD_NFS is not set CONFIG_SYS_PROMPT="Pandora # " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/omap3_zoom1_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_TARGET_OMAP3_ZOOM1=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/omap4_panda_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/omap4_sdp4430_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set +CONFIG_CMD_BOOTZ=y
configs/omap5_uevm_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/pcm051_rev1_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV1" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/pcm051_rev3_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV3" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/pengwyn_defconfig +1 -0
@@ -5,3 +5,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/pepper_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="pepper# " CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y
configs/pxm2_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_BOOTZ=y
configs/rastaban_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_BOOTZ=y
configs/rut_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_BOOTZ=y
configs/thuban_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_BOOTZ=y
include/config_distro_defaults.h +2 -0
@@ -46,8 +46,10 @@#ifdef CONFIG_ARM64 #define CONFIG_CMD_BOOTI #else +#ifndef CONFIG_CMD_BOOTZ #define CONFIG_CMD_BOOTZ #endif +#endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_EXT2
include/configs/cm_t35.h +0 -1
@@ -199,7 +199,6 @@"nand read ${loadaddr} 2a0000 400000; " \"bootm ${loadaddr}\0" \ -#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTCOMMAND \"mmc dev ${mmcdev}; if mmc rescan; then " \"if run loadbootscript; then " \
include/configs/devkit8000.h +0 -1
@@ -103,7 +103,6 @@#undef CONFIG_CMD_SPI#undef CONFIG_CMD_GPIO#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BOOTZ#undef CONFIG_SUPPORT_RAW_INITRD#undef CONFIG_FAT_WRITE#undef CONFIG_CMD_EXT4
include/configs/ti_armv7_common.h +0 -1
@@ -147,7 +147,6 @@#endif #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD /*
Signature · 1 line
2.4.6
PATCH 8/10 ti: omap/am: move CONFIG_CMD_NAND to defconfig
In reply to Igor GrinbergMake more use of the Kconfig and move CONFIG_CMD_NAND config option to defconfigs for ti omap/am based boards.
--- configs/am335x_baltos_defconfig | 1 + configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_gp_evm_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/cairo_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/devkit8000_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0030_nand_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap3_pandora_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/pengwyn_defconfig | 1 + include/configs/cm_t335.h | 1 - include/configs/cm_t35.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/ti_armv7_omap.h | 1 - 25 files changed, 21 insertions(+), 4 deletions(-)
configs/am335x_baltos_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am335x_evm_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am335x_evm_nor_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am335x_evm_usbspl_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am335x_gp_evm_defconfig +1 -0
@@ -13,3 +13,4 @@ CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y CONFIG_RSA=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_NAND=y
configs/am335x_igep0033_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am43xx_evm_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/cairo_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="Cairo # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/cm_t335_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="CM-T335 # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/cm_t35_defconfig +1 -0
@@ -7,5 +7,6 @@ CONFIG_SYS_PROMPT="CM-T3x # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set
configs/cm_t43_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_CMD_USB=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/devkit8000_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_NAND=y
configs/igep0020_nand_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/igep0030_nand_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/omap3_beagle_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_FLASH is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/omap3_overo_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="Overo # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/omap3_pandora_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_TARGET_OMAP3_PANDORA=y CONFIG_SYS_PROMPT="Pandora # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/omap3_zoom1_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_TARGET_OMAP3_ZOOM1=y # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
configs/pengwyn_defconfig +1 -0
@@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_NAND=y
include/configs/cm_t335.h +0 -1
@@ -138,7 +138,6 @@#undef CONFIG_SYS_NAND_U_BOOT_OFFS#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 -#define CONFIG_CMD_NAND #define MTDIDS_DEFAULT "nand0=nand"#define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \ "1m(u-boot),1m(u-boot-env)," \
include/configs/cm_t35.h +0 -1
@@ -123,7 +123,6 @@#define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING
include/configs/omap3_beagle.h +0 -1
@@ -106,7 +106,6 @@ "4m(kernel),-(fs)"#define CONFIG_USB_STORAGE /* USB storage support */ -#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_LED /* LED support */ #define CONFIG_CMD_GPIO /* Enable gpio command */ #define CONFIG_CMD_DHCP
include/configs/ti_armv7_omap.h +0 -1
@@ -40,7 +40,6 @@#define CONFIG_SYS_NAND_BASE 0x8000000#endif #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND #endif /* Now for the remaining common defines */
Signature · 1 line
2.4.6
PATCH 9/10 ti: omap/am: move CONFIG_CMD_I2C to defconfig
In reply to Igor GrinbergMake more use of the Kconfig and move CONFIG_CMD_I2C config option to defconfigs for ti omap/am based boards.
--- configs/am335x_baltos_defconfig | 1 + configs/am335x_evm_defconfig | 1 + configs/am335x_evm_nor_defconfig | 1 + configs/am335x_evm_norboot_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am335x_evm_usbspl_defconfig | 1 + configs/am335x_gp_evm_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/beagle_x15_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/cairo_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/cm_t54_defconfig | 1 + configs/devkit8000_defconfig | 1 + configs/dra72_evm_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_evm_qspiboot_defconfig | 1 + configs/dra7xx_evm_uart3_defconfig | 1 + configs/duovero_defconfig | 1 + configs/igep0020_defconfig | 1 + configs/igep0020_nand_defconfig | 1 + configs/igep0030_defconfig | 1 + configs/igep0030_nand_defconfig | 1 + configs/igep0032_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap3_pandora_defconfig | 1 + configs/omap3_zoom1_defconfig | 1 + configs/omap4_panda_defconfig | 1 + configs/omap4_sdp4430_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + include/configs/cm_t35.h | 1 - include/configs/ti_armv7_common.h | 1 - 47 files changed, 45 insertions(+), 2 deletions(-)
configs/am335x_baltos_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am335x_evm_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am335x_evm_nor_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am335x_evm_norboot_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_NOR_BOOT=y CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/am335x_evm_usbspl_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am335x_gp_evm_defconfig +1 -0
@@ -14,3 +14,4 @@ CONFIG_SPI_FLASH=y CONFIG_RSA=y CONFIG_HUSH_PARSER=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am335x_igep0033_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am43xx_evm_defconfig +1 -0
@@ -10,3 +10,4 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/am43xx_evm_qspiboot_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/beagle_x15_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/birdland_bav335a_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/birdland_bav335b_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/cairo_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_SYS_PROMPT="Cairo # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/cm_t335_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_PROMPT="CM-T335 # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/cm_t35_defconfig +1 -0
@@ -8,5 +8,6 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set
configs/cm_t43_defconfig +1 -0
@@ -11,3 +11,4 @@ CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/cm_t54_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/devkit8000_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/dra72_evm_defconfig +1 -0
@@ -17,3 +17,4 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_DM_GPIO=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/dra7xx_evm_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/dra7xx_evm_qspiboot_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/dra7xx_evm_uart3_defconfig +1 -0
@@ -13,3 +13,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/duovero_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="duovero # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/igep0020_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/igep0020_nand_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/igep0030_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/igep0030_nand_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/igep0032_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/k2e_evm_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_PROMPT="K2E EVM # " # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/k2hk_evm_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_PROMPT="K2HK EVM # " # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/k2l_evm_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_SYS_PROMPT="K2L EVM # " # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/omap3_beagle_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/omap3_overo_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SYS_PROMPT="Overo # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/omap3_pandora_defconfig +1 -0
@@ -12,3 +12,4 @@ CONFIG_SYS_PROMPT="Pandora # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/omap3_zoom1_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_TARGET_OMAP3_ZOOM1=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/omap4_panda_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SPL=y # CONFIG_CMD_NFS is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/omap4_sdp4430_defconfig +1 -0
@@ -9,3 +9,4 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/omap5_uevm_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/pcm051_rev1_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/pcm051_rev3_defconfig +1 -0
@@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
configs/pengwyn_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y
configs/pepper_defconfig +1 -0
@@ -7,3 +7,4 @@ CONFIG_SPL=y CONFIG_SYS_PROMPT="pepper# " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y
include/configs/cm_t35.h +0 -1
@@ -121,7 +121,6 @@"1920k(u-boot),256k(u-boot-env)," \ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING
include/configs/ti_armv7_common.h +0 -1
@@ -85,7 +85,6 @@/* I2C IP block */ #define CONFIG_I2C -#define CONFIG_CMD_I2C #define CONFIG_SYS_I2C /* MMC/SD IP block */
Signature · 1 line
2.4.6
PATCH 10/10 ti: omap/am: move CONFIG_BOOTDELAY to defconfig
In reply to Igor GrinbergMake more use of the Kconfig and move CONFIG_BOOTDELAY config option to defconfigs for ti omap/am based boards.
--- configs/am335x_baltos_defconfig | 2 ++ configs/am335x_evm_defconfig | 2 ++ configs/am335x_evm_nor_defconfig | 2 ++ configs/am335x_evm_norboot_defconfig | 2 ++ configs/am335x_evm_spiboot_defconfig | 2 ++ configs/am335x_evm_usbspl_defconfig | 2 ++ configs/am335x_gp_evm_defconfig | 2 ++ configs/am335x_igep0033_defconfig | 2 ++ configs/am43xx_evm_defconfig | 2 ++ configs/am43xx_evm_ethboot_defconfig | 2 ++ configs/am43xx_evm_qspiboot_defconfig | 2 ++ configs/am43xx_evm_usbhost_boot_defconfig | 2 ++ configs/beagle_x15_defconfig | 2 ++ configs/birdland_bav335a_defconfig | 2 ++ configs/birdland_bav335b_defconfig | 2 ++ configs/cairo_defconfig | 2 ++ configs/cm_t335_defconfig | 2 ++ configs/cm_t35_defconfig | 2 ++ configs/cm_t43_defconfig | 2 ++ configs/cm_t54_defconfig | 2 ++ configs/devkit8000_defconfig | 2 ++ configs/dra72_evm_defconfig | 2 ++ configs/dra7xx_evm_defconfig | 2 ++ configs/dra7xx_evm_qspiboot_defconfig | 2 ++ configs/dra7xx_evm_uart3_defconfig | 2 ++ configs/duovero_defconfig | 2 ++ configs/igep0020_defconfig | 2 ++ configs/igep0020_nand_defconfig | 2 ++ configs/igep0030_defconfig | 2 ++ configs/igep0030_nand_defconfig | 2 ++ configs/igep0032_defconfig | 2 ++ configs/k2e_evm_defconfig | 2 ++ configs/k2hk_evm_defconfig | 2 ++ configs/k2l_evm_defconfig | 2 ++ configs/omap3_beagle_defconfig | 2 ++ configs/omap3_overo_defconfig | 2 ++ configs/omap3_pandora_defconfig | 2 ++ configs/omap3_zoom1_defconfig | 2 ++ configs/omap4_panda_defconfig | 2 ++ configs/omap4_sdp4430_defconfig | 2 ++ configs/omap5_uevm_defconfig | 2 ++ configs/pcm051_rev1_defconfig | 2 ++ configs/pcm051_rev3_defconfig | 2 ++ configs/pengwyn_defconfig | 2 ++ configs/pepper_defconfig | 2 ++ include/config_distro_defaults.h | 2 ++ include/configs/cm_t35.h | 1 - include/configs/cm_t43.h | 1 - include/configs/cm_t54.h | 3 --- include/configs/omap3_cairo.h | 3 --- include/configs/ti_armv7_common.h | 5 ----- 51 files changed, 92 insertions(+), 13 deletions(-)
configs/am335x_baltos_defconfig +2 -0
@@ -13,3 +13,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_evm_defconfig +2 -0
@@ -12,3 +12,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_evm_nor_defconfig +2 -0
@@ -12,3 +12,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_evm_norboot_defconfig +2 -0
@@ -8,3 +8,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_evm_spiboot_defconfig +2 -0
@@ -11,3 +11,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_evm_usbspl_defconfig +2 -0
@@ -12,3 +12,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_gp_evm_defconfig +2 -0
@@ -15,3 +15,5 @@ CONFIG_RSA=y CONFIG_HUSH_PARSER=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am335x_igep0033_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am43xx_evm_defconfig +2 -0
@@ -11,3 +11,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am43xx_evm_ethboot_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am43xx_evm_qspiboot_defconfig +2 -0
@@ -8,3 +8,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/am43xx_evm_usbhost_boot_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/beagle_x15_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/birdland_bav335a_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/birdland_bav335b_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/cairo_defconfig +2 -0
@@ -12,3 +12,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=0
configs/cm_t335_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=3
configs/cm_t35_defconfig +2 -0
@@ -4,6 +4,8 @@ CONFIG_TARGET_CM_T35=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T3x # " +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=3 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/cm_t43_defconfig +2 -0
@@ -12,3 +12,5 @@ CONFIG_DM_GPIO=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=3
configs/cm_t54_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=3
configs/devkit8000_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/dra72_evm_defconfig +2 -0
@@ -18,3 +18,5 @@ CONFIG_DM_GPIO=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/dra7xx_evm_defconfig +2 -0
@@ -13,3 +13,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/dra7xx_evm_qspiboot_defconfig +2 -0
@@ -13,3 +13,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/dra7xx_evm_uart3_defconfig +2 -0
@@ -14,3 +14,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/duovero_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SYS_PROMPT="duovero # " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/igep0020_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/igep0020_nand_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/igep0030_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/igep0030_nand_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/igep0032_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/k2e_evm_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SYS_PROMPT="K2E EVM # " CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/k2hk_evm_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SYS_PROMPT="K2HK EVM # " CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/k2l_evm_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_SYS_PROMPT="K2L EVM # " CONFIG_SPI_FLASH=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap3_beagle_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap3_overo_defconfig +2 -0
@@ -13,3 +13,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap3_pandora_defconfig +2 -0
@@ -13,3 +13,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap3_zoom1_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap4_panda_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap4_sdp4430_defconfig +2 -0
@@ -10,3 +10,5 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/omap5_uevm_defconfig +2 -0
@@ -8,3 +8,5 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/pcm051_rev1_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/pcm051_rev3_defconfig +2 -0
@@ -9,3 +9,5 @@ CONFIG_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/pengwyn_defconfig +2 -0
@@ -8,3 +8,5 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
configs/pepper_defconfig +2 -0
@@ -8,3 +8,5 @@ CONFIG_SYS_PROMPT="pepper# " CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y +CONFIG_AUTOBOOT_BOOTDELAY=y +CONFIG_BOOTDELAY=1
include/config_distro_defaults.h +2 -0
@@ -62,7 +62,9 @@#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE +#ifndef CONFIG_BOOTDELAY #define CONFIG_BOOTDELAY 2 +#endif #define CONFIG_SYS_LONGHELP #define CONFIG_MENU #define CONFIG_DOS_PARTITION
include/configs/cm_t35.h +0 -1
@@ -155,7 +155,6 @@/* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 3#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \
include/configs/cm_t43.h +0 -1
@@ -109,7 +109,6 @@#undef CONFIG_SPL_GPIO_SUPPORT#undef CONFIG_SPL_NAND_SUPPORT#undef CONFIG_SPL_BOARD_INIT -#undef CONFIG_BOOTDELAY#include <config_distro_defaults.h> #define CONFIG_ZERO_BOOTDELAY_CHECK #undef CONFIG_CMD_IMLS
include/configs/cm_t54.h +0 -3
@@ -107,15 +107,12 @@#undef CONFIG_SYS_AUTOLOAD#undef CONFIG_EXTRA_ENV_SETTINGS#undef CONFIG_BOOTCOMMAND -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 3#define CONFIG_SYS_AUTOLOAD "no"#define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "baudrate=115200\0" \ - "bootdelay=3\0" \ "autoload=no\0" \ "bootscr=bootscr.img\0" \ "fdtfile=omap5-sbc-t54.dtb\0" \
include/configs/omap3_cairo.h +0 -3
@@ -73,9 +73,6 @@#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1/* Max number of NAND */ /* devices */ -/* override default CONFIG_BOOTDELAY */ -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 0#define CONFIG_EXTRA_ENV_SETTINGS \ "machid=ffffffff\0" \
include/configs/ti_armv7_common.h +0 -5
@@ -59,11 +59,6 @@"bootm_size=0x10000000\0" /* -* Default to a quick boot delay. - */ -#define CONFIG_BOOTDELAY 1 - -/* * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined, * we say (for simplicity) that we have 1 bank, always, even when * we have more. We always start at 0x80000000, and we place the
Signature · 1 line
2.4.6
cover Kconfig and ti omap configs tidy up
In reply to Igor GrinbergHi Tom,
Quoted 11 lines · Igor Grinberg
The patch set is aimed to transferring several config options from the old
config.hconfiguration style to the newKconfigframework and also move some of the existing (inKconfig) ones fromconfig.hstyle to the defconfig style in the ti-omap land.It is based on the 7d31c6a (Merge
git://git.denx.de/u-boot-pxa) commit upstream.Igor Grinberg (10):
configs: remove remnants ofCONFIG_SYS_NAND_QUIET_TEST
Kconfig: fix typo inCONFIG_FITdescription
Can the above two be applied please?
I'm going to rework the below ones (once I've got some time...), but above two can be applied.
Thanks!
Quoted 8 lines
Kconfig: addCONFIG_BOOTDELAY
Kconfig: addCONFIG_CMD_BOOTZ
ti: omap3: config: remove 1 from boolean define
ti: omap/am: moveCONFIG_HUSH_PARSERto defconfig
ti: omap/am: moveCONFIG_CMD_BOOTZto defconfig
ti: omap/am: moveCONFIG_CMD_NANDto defconfig
ti: omap/am: moveCONFIG_CMD_I2Cto defconfig
ti: omap/am: moveCONFIG_BOOTDELAYto defconfig
[...]
Signature · 2 lines
Regards, Igor.
cover Kconfig and ti omap configs tidy up
Quoted 11 lines · Igor Grinberg
Hi Tom,
Quoted 8 lines · Igor Grinberg
The patch set is aimed to transferring several config options from the old
config.hconfiguration style to the newKconfigframework and also move some of the existing (inKconfig) ones fromconfig.hstyle to the defconfig style in the ti-omap land.It is based on the 7d31c6a (Merge
git://git.denx.de/u-boot-pxa) commit upstream.
Quoted 7 lines
Quoted 3 lines
Igor Grinberg (10):
configs: remove remnants ofCONFIG_SYS_NAND_QUIET_TEST
Kconfig: fix typo inCONFIG_FITdescriptionCan the above two be applied please?
I'm going to rework the below ones (once I've got some time...), but above two can be applied.
OK, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150925/b0df310d/attachment.sig>